Strange marks during reading Rs232 buffer
Hello,
I have got the problem with read Rs232 buffer.
I am sending a frame to initiate an buffer from RAM of the external device. Everything looks correct, the device is answering, but during reading a feedback message i receive a strange marks(attached jpg). I wrote adequate software in c# to have sure the external equipment is available, it works. So i checked if in my .vi are any bytes in the received buffer of Rs232, yes they are...So the problem is in LABView. Does anyone have had the same situation?
I am wondering if there is no any problem with fonts or something?
Thanks for any tips.
Solved!
Go to Solution.
Attachments:
1.jpg 43 KB
2.jpg 246 KB
You should only be configuring your port once. That should be done before this loop. By configuring the port inside of the loop, you are reinitializing that port with every call. That could cause weird things while the configuring is happening.
You should probably have a wait sometime between your write and your read to allow your device to respond.
Is your device sending an End Of Line character at the end of each message? If so, get rid of the "Bytes At Port" propery node. Just tell the read to read something really large. It will automatically stop reading when that End of Line character is found. If it isn't sending that character, you should disable that with the Configure Serial Port (that you should have BEFORE that loop).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
Error in backup of C:\ during read: Error [0x80070057] The parameter is incorrect.
Hi,
Im trying to backup a system state in windows server 2008 R2 HAPP02 using DPM 2010 and im recieving the following error.
Source: Backup, Event ID 5
The backup operation that started at '2011-09-19T06:08:29.143748400Z' has failed with following error code '2155347997'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
I tried to run WBADMIN START SYSTEMSTATEBACKUP -backupTarget:c: and then i recieve the following error
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Please wait while system state files to back up are identified.
This might take several minutes...
Found (1113) files.
Found (6575) files.
Found (10393) files.
Found (13356) files.
Found (16175) files.
Found (27117) files.
Found (30612) files.
Found (34342) files.
Found (36966) files.
Found (40656) files.
Found (41935) files.
Found (45428) files.
Found (48639) files.
Found (51805) files.
Found (57721) files.
Found (64792) files.
Found (72735) files.
Found (77340) files.
Found (81183) files.
Found (81254) files.
Found (81254) files.
Found (81254) files.
The search for system state files is complete.
Starting to back up files...
The backup of files reported by 'Task Scheduler Writer' is complete.
The backup of files reported by 'VSS Metadata Store Writer' is complete.
The backup of files reported by 'Performance Counters Writer' is complete
The backup of files reported by 'IIS Config Writer' is complete.
Overall progress: 0%.
Currently backing up files reported by 'System Writer'...
Overall progress: 1%.
Currently backing up files reported by 'System Writer'...
Overall progress: 2%.
Currently backing up files reported by 'System Writer'...
Overall progress: 4%.
Currently backing up files reported by 'System Writer'...
Overall progress: 5%.
Currently backing up files reported by 'System Writer'...
Overall progress: 7%.
Currently backing up files reported by 'System Writer'...
Overall progress: 8%.
Currently backing up files reported by 'System Writer'...
Overall progress: 9%.
Currently backing up files reported by 'System Writer'...
Overall progress: 11%.
Currently backing up files reported by 'System Writer'...
Overall progress: 12%.
Currently backing up files reported by 'System Writer'...
Overall progress: 13%.
Currently backing up files reported by 'System Writer'...
Overall progress: 15%.
Currently backing up files reported by 'System Writer'...
Summary of the backup operation:
The backup of the system state failed [2011-09-19 09:42].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-19-09-2011_09-36-37.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-19-09-2011_09-36-37.log
The operation ended before completion.
The parameter is incorrect.
When i check the backup_error log file i found the following error
Error in backup of C:\ during read: Error [0x80070057] The parameter is incorrect.
Any ideas about the error?
Thanks in advnace,
Laith.sorry for the delay.
This error condition has been found with Anti-virus software.
Use Msconfig to disable all antivirus services and Startup items [or uninstall temporarily] and test.
Reviewing logs.
[0]0ED8.124C::09/22/2011-14:05:02.204 [usa]HardWrite: NtWriteFile failure: 0xc000009d, 0xbb9ee000, 0x10000
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::SetFormatStatus
backup.cpp@4817] ERROR:Format was unable to complete successfully, final result: 57
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::FormatMedia
backup.cpp@4740] ERROR:Format on
\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25} failed.
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::FormatMedia
backup.cpp@4746] INFO:Format done
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::MountVHD
backup.cpp@15683] ERROR:FormatMedia
\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25} failed, hr: 0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@15702] EXIT: CBlbBackupAsync::MountVHD
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::CreateVHD
backup.cpp@9127] ERROR:MountVHD failed for
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901\9f1ea685-a26b-11de-bbc7-806e6f6e6963.vhd failed hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@9138] EXIT: CBlbBackupAsync::CreateVHD
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@9592] EXIT: CBlbBackupAsync::PrepareTargetVolumesForSSB
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::BackupToMediaForSSB
backup.cpp@10379] ERROR:SSB call failed with hr=0x807800c5, detailed hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbsrv
restoresystemstate.cpp@131] ENTER: CBlbsrvSystemStateRestore::StopFileLogging
[0]ed8.124c 09/22/2011-14:05:02.208 [blbsrv
restoresystemstate.cpp@138] EXIT: CBlbsrvSystemStateRestore::StopFileLogging
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@10449] EXIT: CBlbBackupAsync::BackupToMediaForSSB
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::PerformSystemStateBackup
backup.cpp@17287] WARNING:SSB operation unsuccessful with hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbSystemStateBackupAsync::SetState
systemstatebackup.cpp@1061] INFO:ENGINE STATE:BACKUP SYSTEM STATE:5
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::PerformSystemStateBackup
backup.cpp@17300] INFO:Backup has system state = 0
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17306] EXIT: CBlbBackupAsync::PerformSystemStateBackup
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17331] ENTER: CBlbBackupAsync::UpdateBackupInfoIfRequired
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17379] EXIT: CBlbBackupAsync::UpdateBackupInfoIfRequired
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1456] ENTER: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1460] INFO:bIsBackupFailed: 0
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1261] ENTER: CBlbComponentBackupHelper::BuildSppBackupCompleteStateArray
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1323] EXIT: CBlbComponentBackupHelper::BuildSppBackupCompleteStateArray
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: CVssAsrAPIBackup::GetVolumeComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: BootGetWinREVolGuid
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: _GetElementData
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn][WPP_ASR_ERROR] NT STATUS ERROR 0xc0000225(STATUS_NOT_FOUND) [status]: (bootlib.cpp:497)
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: _GetElementData
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: BootGetWinREVolGuid
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{9f1ea685-a26b-11de-bbc7-806e6f6e6963} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{d513444f-a276-11de-b33e-00155d663512} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrwriter][WPP_ASR_INFO]cComponents = 3 , cMaxComponents = 5 (asrwriterbackup.cpp:602)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: CVssAsrAPIBackup::GetVolumeComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.429 [asrcmn]ENTER: CVssAsrAPIBackup::GetDiskComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.429 [asrcmn]ENTER: DiskListInitialize
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Disk
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Disk
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: DiskListInitialize
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskListMarkClusteredDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: DiskListMarkClusteredDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskListPopulateLayoutInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Getting disk info:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrbkup.cpp:1415)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]EXIT: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]ENTER: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]ENTER: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]ENTER: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrsys][WPP_ASR_INFO]Disk device number=1 (asrbkup.cpp:1495)
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrsys][WPP_ASR_INFO]Getting disk info:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrbkup.cpp:1415)
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]EXIT: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]EXIT: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Disk device number=0 (asrbkup.cpp:1495)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: DiskListPopulateLayoutInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: DiskListMarkOfflineDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Getting Online/Offline disk:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrsys.cpp:233)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Getting Online/Offline disk:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrsys.cpp:233)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: DiskListMarkOfflineDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: CVssAsrAPIBackup::GetDiskComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: CVssAsrAPIBackup::GetBcdComponent
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]ENTER: GetVolumeNameFromDeviceName
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: GetVolumeNameFromDeviceName
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: CVssAsrAPIBackup::GetBcdComponent
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3149] ENTER: CBlbBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3209] ENTER: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3342] EXIT: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3359] ENTER: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
systemstatebackup.cpp@740] ENTER: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
systemstatebackup.cpp@874] EXIT: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3399] EXIT: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3192] EXIT: CBlbBackupAsync::QueryStatus
[0]ed8.124c 09/22/2011-14:05:03.742 [componenthelper
componentbackuphelper.cpp@1518] EXIT: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.742 [service
backup.cpp@6290] ENTER: CBlbBackupAsync::WriteBackupComponents
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils
BlbSecurityUtils.cpp@1146] ENTER: CBlbImpersonationHelper::ImpersonateCaller
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils CBlbImpersonationHelper::ImpersonateCaller
BlbSecurityUtils.cpp@1178] INFO:No impersonation done.
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils
BlbSecurityUtils.cpp@1183] EXIT: CBlbImpersonationHelper::ImpersonateCaller
[0]ed8.124c 09/22/2011-14:05:03.743 [util
systemutils.cpp@709] ENTER: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.743 [util BlbutilRegReadDWORD
systemutils.cpp@731] WARNING:RegQueryValueEx NoTargetSnapshot unsuccessful, hr:0x80070002
[0]ed8.124c 09/22/2011-14:05:03.743 [util
systemutils.cpp@749] EXIT: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@6444] EXIT: CBlbBackupAsync::WriteBackupComponents
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@8946] ENTER: CBlbBackupAsync::UpdateLocalCatalogAfterbackup
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@7790] ENTER: CBlbBackupAsync::GetComponentsList
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'TasksStore' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (0) <NULL>\TasksStore.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'WriterMetadataStore' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (1) <NULL>\WriterMetadataStore.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'PerformanceCounters' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (2) <NULL>\PerformanceCounters.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'WMI' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (3) <NULL>\WMI.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'IISMETABASE' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (4) <NULL>\IISMETABASE.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'COM+ REGDB' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (5) <NULL>\COM+ REGDB.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'IISCONFIG' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (6) <NULL>\IISCONFIG.
[0]ed8.124c 09/22/2011-14:05:03.768 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'System Files' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (7) <NULL>\System Files.
[0]ed8.124c 09/22/2011-14:05:03.768 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'Registry' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (8) <NULL>\Registry.
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7917] EXIT: CBlbBackupAsync::GetComponentsList
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7943] ENTER: CBlbBackupAsync::AddComponentsToLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7961] EXIT: CBlbBackupAsync::AddComponentsToLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@11835] ENTER: CBlbBackupAsync::SetVolumesInLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@1557] ENTER: CBlbVolumeBackupContext::GetOriginalAccessPath
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@1585] EXIT: CBlbVolumeBackupContext::GetOriginalAccessPath
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::SetVolumesInLocalCatalog
backup.cpp@11894] INFO:Not adding volume C: to catalog since it failed
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::SetVolumesInLocalCatalog
backup.cpp@11943] ERROR:Backup of all the source volumes failed.
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@11970] EXIT: CBlbBackupAsync::SetVolumesInLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::UpdateLocalCatalogAfterbackup
backup.cpp@8986] ERROR:CBlbBackupAsync::SetVolumesInLocalCatalog failed with hr=0x80780049
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@9050] EXIT: CBlbBackupAsync::UpdateLocalCatalogAfterbackup
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15335] ENTER: CBlbBackupAsync::RemoveESPCache
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::RemoveESPCache
backup.cpp@15338] INFO:No esp cache created, so not freeing up
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15345] EXIT: CBlbBackupAsync::RemoveESPCache
[0]ed8.124c 09/22/2011-14:05:03.768 [service BlbBackupThreadFunc
backup.cpp@19732] INFO:BlbBackupThreadFunc took 363232 ms to complete
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15795] ENTER: CBlbBackupAsync::DismountAllVHDs
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15723] ENTER: CBlbBackupAsync::DismountVHD
Unknown( 70): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 68): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 69): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 77): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 78): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 74): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 79): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 80): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 71): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 72): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
[0]ed8.124c 09/22/2011-14:05:03.769 [service CBlbBackupAsync::DismountVHD
backup.cpp@15744] ERROR:CBlbVhdHelper::Dismount failed for '\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25}', hr: 0x80070490
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@15775] EXIT: CBlbBackupAsync::DismountVHD
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@15819] EXIT: CBlbBackupAsync::DismountAllVHDs
[0]ed8.124c 09/22/2011-14:05:03.769 [service BlbBackupThreadFunc
backup.cpp@19738] WARNING:DismountAllVHDs unsuccessful with hr=0x80070490
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbBackupTargetUtils.cpp@3225] ENTER: BlbDeleteOldBackupLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup-*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup_Error*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '0' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup_Operations*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '0' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbBackupTargetUtils.cpp@3260] EXIT: BlbDeleteOldBackupLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper
componentbackuphelper.cpp@1456] ENTER: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1460] INFO:bIsBackupFailed: 1
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1473] INFO:BackupComplete already attempted.
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper
componentbackuphelper.cpp@1518] EXIT: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@13649] ENTER: CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.769 [service
PerformanceManager.cpp@550] ENTER: CPerformanceManager::Initialize
[0]ed8.124c 09/22/2011-14:05:03.769 [service
PerformanceManager.cpp@281] ENTER: CPerformanceManager::QueryPerformanceSettings
[0]ed8.124c 09/22/2011-14:05:03.770 [service CPerformanceManager::QueryPerformanceSettings
PerformanceManager.cpp@382] INFO:Buffer size is 4. First line is <NULL>
[0]ed8.124c 09/22/2011-14:05:03.770 [service CPerformanceManager::QueryPerformanceSettings
PerformanceManager.cpp@389] INFO:Custom performance settings is empty.
[0]ed8.124c 09/22/2011-14:05:03.770 [service
PerformanceManager.cpp@484] EXIT: CPerformanceManager::QueryPerformanceSettings
[0]ed8.124c 09/22/2011-14:05:03.770 [service
PerformanceManager.cpp@560] EXIT: CPerformanceManager::Initialize
[0]ed8.124c 09/22/2011-14:05:03.777 [util
systemutils.cpp@709] ENTER: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.777 [util BlbutilRegReadDWORD
systemutils.cpp@731] WARNING:RegQueryValueEx DoNotDeleteFFBSnapshot unsuccessful, hr:0x80070002
[0]ed8.124c 09/22/2011-14:05:03.777 [util
systemutils.cpp@749] EXIT: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.777 [service
PerformanceManager.cpp@585] ENTER: CPerformanceManager::GetSettingsForVolume
[0]ed8.124c 09/22/2011-14:05:03.777 [service
PerformanceManager.cpp@620] EXIT: CPerformanceManager::GetSettingsForVolume
[0]ed8.124c 09/22/2011-14:05:03.777 [service CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
backup.cpp@14045] INFO:Deleting current snapshot (\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy8\)
[0]ed8.124c 09/22/2011-14:05:03.931 [service
backup.cpp@14082] EXIT: CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14432] ENTER: CBlbBackupAsync::SetSourceDiffAreasIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14539] EXIT: CBlbBackupAsync::SetSourceDiffAreasIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14737] ENTER: CBlbBackupAsync::ResetTargetDiffAreaSize
[0]ed8.124c 09/22/2011-14:05:03.933 [service CBlbBackupAsync::ResetTargetDiffAreaSize
backup.cpp@14754] INFO:Not resetting diff area
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14866] EXIT: CBlbBackupAsync::ResetTargetDiffAreaSize
[0]ed8.124c 09/22/2011-14:05:03.963 [service BlbBackupThreadFunc
backup.cpp@19873] ERROR:Backup operation aborted with hr=80780049
[0]ed8.124c 09/22/2011-14:05:03.963 [service CBlbSystemStateBackupAsync::SetState
systemstatebackup.cpp@1061] INFO:ENGINE STATE:BACKUP SYSTEM STATE:5
[0]ed8.124c 09/22/2011-14:05:03.963 [service CBlbBackupAsync::SetState
backup.cpp@14709] INFO:ENGINE STATE:BACKUP:12. Previous state:8
[0]ed8.124c 09/22/2011-14:05:03.963 [util
fileutils.cpp@1388] ENTER: BlbutilDeleteDirectory
[0]ed8.124c 09/22/2011-14:05:03.963 [util
fileutils.cpp@1183] ENTER: BlbutilDeleteDirectory2
[0]ed8.124c 09/22/2011-14:05:03.970 [util
fileutils.cpp@1344] EXIT: BlbutilDeleteDirectory2
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1443] INFO:Aborting deletion of
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 as one or more diectories or files are not getting deleted
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1463] INFO:Total number of files/directories deleted in
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 is 17
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1465] INFO:Deleting
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 took 0 ms
[0]ed8.124c 09/22/2011-14:05:03.970 [util
fileutils.cpp@1467] EXIT: BlbutilDeleteDirectory
[0]ed8.124c 09/22/2011-14:05:03.970 [service
backup.cpp@12718] ENTER: CBlbBackupAsync::PublishAllBackupStopEvents
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::PublishAllBackupStopEvents
backup.cpp@13047] INFO:Backup info for Volume [hr=8078001D, detailed hr = 0, Flags=1574, backupTypeDetermined = 1, IsCritical = 1]
[0]ed8.124c 09/22/2011-14:05:03.971 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.124c 09/22/2011-14:05:03.971 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.124c 09/22/2011-14:05:03.971 [service
systemstatebackup.cpp@1526] ENTER: CBlbSystemStateBackupAsync::GetSSBTimes
[0]ed8.124c 09/22/2011-14:05:03.971 [service
systemstatebackup.cpp@1531] EXIT: CBlbSystemStateBackupAsync::GetSSBTimes
[0]ed8.124c 09/22/2011-14:05:03.971 [blbengutils
BlbSqmUtils.cpp@342] ENTER: PublishBackupSqmDatapoint
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@13273] EXIT: CBlbBackupAsync::PublishAllBackupStopEvents
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@15016] ENTER: CBlbBackupAsync::UpdateBackupStatInRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@14895] ENTER: CBlbBackupAsync::GetLastSuccessfulBackupInfo
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::GetLastSuccessfulBackupInfo
backup.cpp@14960] INFO:Last successful backup stats. utc time 0, target name (NULL), target access path (NULL)
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@14991] EXIT: CBlbBackupAsync::GetLastSuccessfulBackupInfo
[0]ed8.124c 09/22/2011-14:05:03.971 [helper
blbBackupStatUpdater.cpp@205] ENTER: CBlbBackupStatUpdater::SaveStatsToRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [helper CBlbBackupStatUpdater::SaveStatsToRegistry
blbBackupStatUpdater.cpp@233] INFO:RegOpenKeyEx was unsuccessful for HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsBackup. hr=0x80070002
[0]ed8.124c 09/22/2011-14:05:03.971 [helper
blbBackupStatUpdater.cpp@368] EXIT: CBlbBackupStatUpdater::SaveStatsToRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::UpdateBackupStatInRegistry
backup.cpp@15058] WARNING:pBlbBackupStatUpdater->SaveStatsToRegistry unsuccessful with hr=0x80070002. This should be fine on server skus.
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@15069] EXIT: CBlbBackupAsync::UpdateBackupStatInRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service BlbBackupThreadFunc
backup.cpp@19957] WARNING:UpdateBackupStatInRegistry unsuccessful with hr=80070002
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restoresystemstate.cpp@259] ENTER: CBlbsrvSystemStateRestore::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restorefiles.cpp@162] ENTER: CBlbsrvRestoreFiles::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
srvutil.cpp@139] ENTER: BlbsrvFreeRestoreFileSpecs
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
srvutil.cpp@151] EXIT: BlbsrvFreeRestoreFileSpecs
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restorefiles.cpp@210] EXIT: CBlbsrvRestoreFiles::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restoresystemstate.cpp@312] EXIT: CBlbsrvSystemStateRestore::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbAsync::Done
async.cpp@187] INFO:Marking async operation as completed
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbAsync::Done
async.cpp@190] INFO:Calling CompleteAsyncOperation for parent operation
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@19987] EXIT: BlbBackupThreadFunc
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3149] ENTER: CBlbBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3209] ENTER: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3342] EXIT: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3359] ENTER: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
systemstatebackup.cpp@740] ENTER: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
systemstatebackup.cpp@874] EXIT: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3399] EXIT: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3192] EXIT: CBlbBackupAsync::QueryStatus
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@853] ENTER: BlbStopTracing
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@397] ENTER: BlbStopTracing
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@51] ENTER: BlbAllocateEventTraceProp
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@83] EXIT: BlbAllocateEventTraceProp
Log Name: Microsoft-Windows-Backup
Source: Microsoft-Windows-Backup
Date: 9/22/2011 1:28:44 AM
Event ID: 5
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HEIAPP02.heimstaden.local
Description:
The backup operation that started at '2011-09-22T06:22:24.687716500Z' has failed with following error code '2155347997'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Sumesh P - Microsoft Online Community Support -
POP3 email marked as read on server before being read
Problem: Emails downloaded to my iPhone are marked as read on the server, even when they have not been read on either the iPhone, server/webmail or any other email client. When iPhone recieves a new email, it is listed as unread on the phone but on the server's webmail the same email will be listed as read. This sounds exactly like the problem described here, but unfortunately there was no solution to that discussion. The main issue for me when trying to find the new/unread email via webmail, when my inbox is sorted by conversation/thread, is that all the emails look the same. The new email is not highlighted differently (ie. unread) to the other 99 emails on the page and so is difficult to find.
More information: My iPhone is supplied by my employer and is used primarily for work. The primary mail account is configured to sync with my employer's Exchange server. This all works fine. I have added a second account to send/retrieve SMTP/POP3 email to/from my home ISP's mail server. This all works fine too (but with the above mentioned problem). With my previous phone (Windows Mobile), this same setup worked fine but without items on the server being marked as read.
Example: At work, on my PC, I have a web browser tab open on my home ISP's webmail page. The iPhone chimes and displays a new email notice on its lockscreen. Without touching the iPhone, I check my webmail on the PC to read the new email. In the list of emails in my webmail Inbox, the new email is already marked as read, even though I have not yet opened it on the iPhone nor via webmail. Futher to this, if I send myself an email from work to home, and immediately check my webmail, I can see the email listed as unread. Without opening the email, if I allow the iPhone to check for new email (or manually make it check) but do not open the new email, then refresh the webmail page, that new email has now become marked as read.
Further information: My ISP does not offer IMAP; this is stated very clearly on their user help/email setup wiki pages. My iPhone is configured to use their POP3 server address and port 110, the same as I have configured on my home PC. My work email account is configured for Push, my home account is configured for Fetch - hourly. The account advanced settings... Deleted Messages=never remove, Use SSL=off, Authentication=password, Delete from server=never, Server Port=110, S/MIME=off.
Any ideas that the heck is going on here?Use OWA (Outlook Web Access) Not POP3 Settings
Use OWA (Outlook Web Access) Not POP3 Settings
Use OWA (Outlook Web Access) Not POP3 Settings
Okay. This is doing this because your bb is not logging into the owa (outlook web access), it's using POP3. In order to use owa it must be enabled on your exchange server (ask your admin if you have this option). An owa address is something like https://mail.yourcompay.com/owa, depending how your admin set this up it could be named something else. You can either get to this option through your phone companys (BIS) website or on the bb itself.
If you use your phone companys website (BIS) to configure this option just log in and find the topic that reads something like this -
"How do I set up BlackBerry Internet E-mail using a My T-Mobile Account?"
This will give you the instruction for setting up the account for owa. (Took me a little bit to find this in my tmobile account.) During this setup there should be an option to check called use owa. You have completed the setup and never saw that option then start over and find that option.
If you go through the bb's setting on the actual device the way to get to this option is kind of strange (at least it was the only way I could figure out how to get to it on my phone).
I started by deleting the email account off the phone then added a new account. Go back to the account setting and change the password to a wrong password. After you select "ok" or "next" or whatever to get to the next screen you will get a message saying could not connect to server or error or something like that. Now you should have a option to configure the device manually. This option will get you to page to allow you to select OWA. Then just configure you bb for owa and you are good to go.
Sorry this is such a crude post. I usually take the time to give very accurate, step-by-step instructions, but I do not have time. Good luck to all with this issue. -
Logical end-of-file reached during read operation
Hi,
Something strange happened to my Logic a couple of days ago - all of a sudden. When I start Logic up it gives me the following error message:
*Error reading/writing file “com.apple.logic.pro.cs”: Logical end-of-file reached during read operation.*
I have re-installed Logic, as well as updated it (8.0.2), I have repaired disk permissions in Disk Utility, and it still keeps popping up. I cannot get on with my projects and I have deadlines!
I found an IT support site, according to that I don't have enough space on my HD. However, I do... I'm confused, and desperately need help.
Thank you so much, I'm looking forward to hearing from somebody.
AgnesI am not opening any files, just launching Logic.
I know. And when you launch Logic, it loads its preferences files - and it seems this is failing - most likely due to file corruption. So delete the file, as I said, and Logic should load fine. -
Error: Logical end-of-file reached during read operation. Result Code = -39
Hello all,
Recently, I have been suddenly getting this error message:
"Logical end-of-file reached during read operation. Result Code = -39."
In my case, when it does come up, it always pops up during the recording of an audio take. Almost immediately after hitting the stop button, this error message would pop up. And then when I go to check the take that was just recorded, there is nothing but shrieking noise. As a result, this pop up error trashes any good take I may have had. It's unpredictable as to when this error decides to pop up as well. So now, when I record, I tend to just have my fingers crossed and hope that this error doesn't pop up especially right after recording a good take!
To no avail, I have tried different I/O buffer settings, repaired permissions, rebooted, and even re-formatted my recording hard disk.
Could this be a possible hint that my hard disk is about to physically collapse? I have had it for about 2 years. Could it be some sort of bug in Logic? Or something else perhaps?
Appreciate any feedback! Thanks a lot!DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this) -
Gmail: Mails sent to myself are marked as READ when using IMAP -how to fix?
I just started using IMAP with my Gmail account and Apple Mail. But when I send an e-mail to myself (from my imap account to my imap account), the e-mail will of course go to my inbox but it will be marked as read.
I don't have the option to "mark as unread" in either Apple Mail rules or Gmail filters, they both only have "mark as read".
If I do it using Gmail webmail, then the e-mail is not marked as read, so I don't know if it's something Apple Mail is doing to my email? If I right-click it and "mark as unread", the message will be marked as unread both in my "inbox" and in my "sent mail". But I don't want to right click all my "to do mails" to make sure I see them.
(I'm aware this is not the best workflow, but I like it..)Alas, I'm still having problems with Gmail. Now what happens is that I'm getting the "caution" triangle next to the account which indicates a problem. The error message when I click on that triangle is: "Unable to Connect There may be a problem with the mail server or network. Check the settings for account “Gmail” or try again. The server error encountered was: The connection to the server “imap.gmail.com” on port 587 timed out."
Also, something else is strange. When I look in the account settings window, my password is not there. It's blank. So I enter it. A few minutes later, when I check, my password is again no longer there.
Regarding your suggestions to move the mail folder, I really don't want to do that because I have about 20 mailboxes full of important saved messages. I can't afford to lose those. Surely there must be some other way?
Leopard is the worst OS upgrade in Apple's history, IMO. It's caused more problems for me than I could have imagined. -
Strange icon during shutdown...
Does anyone else have a strange icon flash on the display for a fraction of a second during shutdown? I running 10.5.1 on my 15" MBP 2.16 Core Duo and have noticed a real weird icon that only shows up occasionally during shutdown. It usually blinks on and off too fast to really see what it is, but I think it is sort of like the symbol on the command key and has a red X across it. I don't have any issues with the MBP with the exception of some files that Disk Utility is having trouble with when I repair permissions which seems to take a long time. It gets to a point where it says time remaining is less than a minute, but keeps going and going for another 3-5 minutes after displaying this:
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Permissions repair complete
Anyone seen this before or have any thoughts?Thanks for the tip.
I did as you suggested and the permissions issue is fully resolved. Never had an issue using the Software Update pane, but I'll file the in my overloaded brain for another time.
I haven't seen the strange icon during shutdown again, but I did identify it as the icon for a piece of software called KeyCue. It shows keyboard shortcuts for the active application by holding down the Command key for about 2 seconds.
Thanks again! -
Mail 2.0.5 - all my messages are missing after marking as read!!!
Ok Mail has worked more or less fine for me after upgrading from 10.3.9 to 10.4.3..until a few minutes ago when I decided to mark all the unread messages in my inbox as read. I hadn't read quite a few, so instead of going and clicking on each one, I just selected all, right clicked, and chose Mark as Read. Suddenly they all disappeared, all but a few. I have two inboxes, one on my ISP, and one .mac. Disk Utility says the hard disk is fine, so I rebuilt both inboxes, and now my ISP inbox still just shows a few emails (appears to be the emails I've received since upgrading to Tiger, only a few days' worth), and my .mac inbox now shows about a years' worth of emails...but I know I have more than that, since I've had the .mac account for 2-3 years or so. Also next to the .mac inbox there is some sort of a progress icon (a pie gradually filling in). If I hover the mouse over the .mac account, it says "Contents stored on server. Name on server: INBOX". Which doesn't make sense, since I have always had Mail download the mail from both my accounts, deleting from server after downloading. If I get info on my ISP inbox, it displays "Account Info", and under the Show Messages on POP server, it shows a bunch of messages from about a year ago. But if I pulldown the menu and instead of showing "all messages on POP server" I choose either of the other options ("items downloaded to my Mac" or "items removed from my Mac"), the list is exactly the same.
My mail appears to be still on my hard drive, since getting info on the various mailbox folders in ~/Library/Mail/ shows about the right amounts of data. I don't want to lose over 300MB (at least 5 years worth) of email....anyone know what could have happened, and more importantly how to fix it?? Thanks!Ok after thoroughly searching previous threads about similar problems (existing messages not being displayed by Mail 2.x.x), it appears the 10.4 Archive and Install didn't completely convert the mbox file from my ISP email, since there were only a few emlx files (but there are hundreds of emails in the mbox)...so I had to resort to reimporting it manually. Not sure what happened though to make Mail see all the messages for a few days after installing 10.4.3; there was no error message during the system install, and all I did that prompted all my messages to disappear was to mark all as read...
As far as the .mac goes, I have no clue where those emails went...I discovered that somewhere along the line my mbox file for .mac account got corrupt...but nothing over a year old is even on the server, which is odd. Those messages apparently are forever lost. Add me to the statistics of why it's important to back up. :/ -
Just noticed a strange marking on my screen when it is turned off, I've tried to clean it off with various products, but it appears to be grease-proof.
Anyone know what it might be or how I might go about getting rid of it?Take the MBP to your local Apple Store or an AASP. Let them deal w/it.
-
This is my list of pages in a book of over 150 pages. In the pages list I have these strange marks indicated by arrows. Anyone know what they are and how did I get them?
Sorry to keep going on about this but I would like to find out more. I have checked other Indesign files with section breaks but they do show these marks. Also the file that shows the marks in the pages list has a square bracket around pp xii-1. Hope the image will show you this.
-
Strange marks on Curve 8900 screen
Hi folks,
I hope someone can help me out. I have a new blackberry 8900 javelin (have like 4 months of use) and some strange marks appeared on the screen. They are small marks, but they don't disappear. I had the same problem with my last curve 8900 (I had 3 8900 models) but last time, the marks disappeared in a few days. Those on mine are not disappearing. I know it's not a liquid crystal leak, it's a malfunction or something, because the mark had a different shape in a few days ago. Here are some pictures i took to show the problem.
hope someone can help me out!
thanks guys!Hey eduardopfm,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Those marks are definitely hardware/lcd screen related. I would suggest contacting your network service provider or point of sale for repair options as this is not software related.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Why are my emails being marked as read automatically?
I recently changed from iPhone 4 to 5; I never experienced any email issues with the iphone4. Now my emails on iphone5 ;same account etc) are sometimes marked as read before I view them. This happens every night over night without fail, and invariable happens during the day too (although not always- I can't yet see any pattern in this). It's extremely frustrating as I could rely on looking at my lock screen on iphone4 to see my recent unread emails; and I now cannot rely on this (and there's normally nothing there as its all marked as read in my inbox, before I've seen it! Then I have to check through each message to make sure I haven't missed something).
There are no other devices running to access this inbox; it is set up on my home laptop through outlook (as it was with iphone4); but this is only switched on about once a week just to download the messages.
Please does anyone have a solution to this very frustrating issue? I did not expect that by upgrading I would be worse off!http://kb.mozillazine.org/Disappearing_mail
-
Install error on Debian 6 (dpkg short read on buffer copy)
Using SCOM 2012 SP1 here. I have successfully deployed the SCOM agent to Debian 7 and Centos 6.5 machines. However, when deploying to a Debian 6 machine, I am getting the following error:
Agent installation operation was not successful
Failed to install kit. Exit code: 1
Standard Output: Sudo path: /usr/bin/
(Reading database ... 23625 files and directories currently installed.)
Unpacking scx (from .../scx-1.4.1-304.universald.1.x64.deb) ...
Standard Error: dpkg-deb (subprocess): short read on buffer copy for failed to write to pipe in copy
dpkg-deb: subprocess paste returned error exit status 2
dpkg: error processing /tmp/scx-scom-ma/scx-1.4.1-304.universald.1.x64.deb (--install):
short read on buffer copy for backend dpkg-deb during `./opt/microsoft/scx/lib_openssl_0.9.8/libpegwql.so.1'
Errors were encountered while processing:
/tmp/scx-scom-ma/scx-1.4.1-304.universald.1.x64.deb
Exception Message:
There was nothing after "Exception Message:"
Searching for this error generally seems to indicate a corrupt .deb file. Anyone ever run into this one?
-- ND SmithWell, this was a pleasant surprise - when I ran it manually, it worked. I'm not sure why it didn't work through the wizard.
# dpkg -i scx-1.4.1-304.universald.1.x64.deb
(Reading database ... 23625 files and directories currently installed.)
Unpacking scx (from scx-1.4.1-304.universald.1.x64.deb) ...
Setting up scx (1.4.1.304) ...
Checking existence of /lib64/libssl.so.0.9.8o and /lib64/libcrypto.so.0.9.8o ...
Checking existence of /lib64/libssl.so.0.9.8 and /lib64/libcrypto.so.0.9.8 ...
Checking existence of /lib64/libssl.so.0.9.8o and /lib64/libcrypto.so.0.9.8o ...
Checking existence of /lib64/libssl.so.0.9.8 and /lib64/libcrypto.so.0.9.8 ...
Checking existence of /usr/lib64/libssl.so.0.9.8o and /usr/lib64/libcrypto.so.0.9.8o ...
Checking existence of /usr/lib64/libssl.so.0.9.8 and /usr/lib64/libcrypto.so.0.9.8 ...
Found /usr/lib64/libssl.so.0.9.8 and /usr/lib64/libcrypto.so.0.9.8 ...
Generating certificate with hostname="foo", domainname="bar"
Starting Microsoft SCX CIM Server: .
-- ND Smith -
How can I keep my e-reader from freezing up. I have to reset it more then once during reading
My Sony e-reader keeps freezing up during reading and when it has been idle for as short as an hour or as long as a couple days. What can I do about this? Does anyone have any ideas? It is frustrating.
Solved!
Go to Solution.Hi Kristina,
Welcome to Sony Community!
Perform the steps mentioned on the below knowledge article to resolve this issue:
https://us.en.kb.sony.com/app/answers/detail/a_id/31730/c/65,66/kw/31730
If the issue persists, Reader needs to be serviced. Contact our telephone support at: 877-263-2863.
Hours of working are: 8:00am - Midnight, EDT; Monday - Friday and 9:00am - 8:00pm EDT; Saturday and Sunday.
If my post answers your question, please mark it as an "Accepted Solution."
Thank you for your post. -
Mail.app + Gmail IMAP, stop auto mark as read
I just switched over to IMAP on my Gmail account and I got everything working fine, except one thing:
I've applied rules in Mail.app so they sort into their corresponding folders on the server (or Labels, in Gmail terms). For some reason because of this, certain messages are automatically marked as read.
This doesn't happen to messages that aren't sorted (ie, they stay in the Inbox > Gmail). The strange thing is, this only happens to certain messages that are sorted.
Anybody have any idea?Resolved.
Maybe you are looking for
-
Read .txt file of numbers and draw
Hello. I am trying to utlize BufferedReader and g.drawline to read numbers from a text file and output to the screen as a "line". I know I still need a while loop and some error checking, but, am having trouble finishing the more 'basic' portion of t
-
Put a Solaris 10 5/08 DVD in my T5220 (verified that it mounts first). Here is what is happening: <snip> {0} ok printenv boot-device cdrom disk net {0} ok devalias cdrom /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0:f {0} ok boot /pci
-
[Business Rules] Rules engine not updating my Fact Result as expected.
I have a Fact type implemented as a Java class, named Commission with the following properties: age(int), area(int), amt(double): In the Java application I set the age to 30 and area to 3: Commission comm = new Commission(); comm.setAge(30); comm.set
-
hi i'd like to ask question about linked server. my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic f
-
Missing Microsoft.SqlServer.Management.Sdk.Sf.dllc
I've tried to establish a database connection from Visual Studio Express 2013 to a local SQL Server Express 2014. The Server is visible and the connection test successful, but when I try to finish the connection, an error pops up saying that assembly