Streams configuration not applied in destination
I have configured the source and destination databases as given the document
http://www.oracle.com/technology/oramag/oracle/04-nov/o64streams.html
There were no erros while configuring the databases.
After inserting the row in the emp table neither i have received error (on both source and destination) nor inserted the row in the destination table.
how to see the errors and where it got struck etc?
Thanks,
Bhaskar
I have exactly the same issue. I am very new to streams.
The capture statistics shows
Total Messages Captured 92302
Captured Message Number 3815566
Captured Message Create Time May 2, 2008 3:18:08 PM IST
Available Message Number 3815567
Available Message Create Time May 2, 2008 3:18:25 PM IST
Enqueue Time May 2, 2008 2:47:24 PM IST Total Messages Enqueued 10650
Enqueued Message Number 3813430
Enqueued Message Create Time
Startup Time May 2, 2008 1:25:19 PM IST
Elapsed Capture Time (ms) 656229
Elapsed Rule Time (ms) 0
Elapsed LCR Time (ms) 11192
Session ID 149
Serial Number 11
Capture Process Number 1
Etc.....
but the propagation statistics has nothing. Something wrong with Propagation? what could it be? how to find out what's wrong?
Start Time April 30, 2008 1:53:57 PM IST
Process Name J000
Session ID 145, 81
Cluster Database Instance 1
Total Number of Messages Propagated 0
Total Number of Bytes Propagated 0
Total Propagation Time in Seconds 0
Maximum Number of Messages in Propagation Window 0
Maximum Number of Bytes in Propagation Window 0
Average Number of Messages in Propagation Window 0
Average Number of Bytes in Propagation Window 0
Average Time to propagate a Single Message in Seconds 0
Total Wait Time in Seconds 0
Average Wait Time in Seconds 0
Failures
Number of Failures in the Current Propagation 0
The Last Error occured At n/a
Thanks.
Similar Messages
-
Streams configuration multiple source-single destination
hi all,
can we configure streams capturing changes from multiple source databases and applying at single destination?
to configure table level replication is it mandatory to enable suppliment logging foe enrire database?
is it possible to configure streams without setting GLOABAL_NAMES parameter to TURE.?
if i enable table level suppliment logging ,will my dependent objects on the table go invalid?
there may be some silly questions,PLease answer my questions.
regards
Sangeeth>
can we configure streams capturing changes from multiple source databases and applying at single destination?yes you can, just should care about conflict resolution when multiple source tables are replicated into the same destination table.
to configure table level replication is it mandatory to enable suppliment logging foe enrire database?no, you can have it for specific tables, which are replicated.
is it possible to configure streams without setting GLOABAL_NAMES parameter to TURE.?yes, you can, but it's error-prone and will be every time pointed by Oracle Support in case of any streams problems.
if i enable table level suppliment logging ,will my dependent objects on the table go invalid?why? I didn't catch it. -
Data are not being applied at destination side
Hi all,
I have implemented real time streams replication(not archive log based downstream replication).
source:9.2.0.8.0
destination:10.2.0.2.0
Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
The trc file shows this:
Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /dev1/visdb10/10.2.0
System name: Linux
Node name: wbsebdev1
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: VIS
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
*** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
*** SESSION ID:(388.16) 2008-05-29 11:39:26.957
The Alertlog file shows at the end this:
Thu May 29 11:19:06 2008
Streams APPLY A001 with pid=16, OS id=9531 stopped
Thu May 29 11:21:25 2008
Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
Thu May 29 11:39:26 2008
Streams APPLY A001 started with pid=18, OS id=14624
Streams Apply Reader started P000 with pid=20 OS id=14626
Streams Apply Server started P001 with pid=21 OS id=14628
Thu May 29 11:41:33 2008
Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
Pls help.
Thanking You,
Nitesh.Problem solved.
-
I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...
I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene -
Archive logs are being shipped, but are not applied
Hi everyone,
Some strange things are happening when I try to configure an Oracle Data Guard setup. Currently I am at the point where the configuration has been completed, and I just need to sync the standby database to the primary one. I can see in the log files that the archive logs are being shipped, but they are not applied on the standby system.
If I run "recover standby database;" manually in sqlplus I can see that it is trying to apply an archive log which is way too old (ORA-00279: change 9656498443 generated at 04/29/2008 08:45:08 needed for thread 1).
In the alert log I can also see this error: Warning: Recovery target destination is in a sibling branch of the controlfile checkpoint. Recovery will only recover changes to datafiles.
At this point I was thinking that the standby database might be on a different incarnation compared to the primary, but this is not the case, they are both in incarnation 6:
6 6 MVF 4023175798 CURRENT 48493546257 13-06-21
Does anyone have an idea how this could happen, and how I could fix this issue?
Thanks, JM.The restore did not cause any errors to be displayed, so I assumed everything was ok.
That's fair enough.
One thing I think might cause this behaviour is that the backup on the primary database is incremental,
Yes...that may be an issue. Best bet is to re-run your standby creation.....as you are doing.
With version 11gR2 you also have the option of duplicate from active database which negates the need to copy your backupsets over to do the restore: I find it a much simpler process than the rman backup, copy files over, restore and then recover process.
http://www.oracle-base.com/articles/11g/data-guard-setup-11gr2.php
Something worth considering. -
Hi folks,
Tried creating Data guard for the first time. Was able to successfully create a standby and on every log switch on primary database, a switch is seen on standby too..
But the issue is, log's are not getting applied on standby db..
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination F:\app\product\11.2.0\dbhome_1\RDBMS
Oldest online log sequence 33
Next log sequence to archive 0
Current log sequence 38
SQL> SELECT sequence#, first_time, next_time, applied
2 FROM v$archived_log
3 ORDER BY sequence#;
SEQUENCE# FIRST_TIM NEXT_TIME APPLIED
*16 31-MAY-12 31-MAY-12 NO*
*17 31-MAY-12 31-MAY-12 NO*
*19 31-MAY-12 31-MAY-12 NO*
*20 31-MAY-12 31-MAY-12 NO*
*28 31-MAY-12 31-MAY-12 NO*
*29 31-MAY-12 31-MAY-12 NO*
*32 31-MAY-12 31-MAY-12 NO*
*34 31-MAY-12 31-MAY-12 NO*
*36 31-MAY-12 31-MAY-12 NO*
*37 31-MAY-12 31-MAY-12 NO*
*38 31-MAY-12 31-MAY-12 NO*
11 rows selected.
Also the alert log on strandby show's as...
Alert log on standby:
Thu May 31 23:30:43 2012
RFS[18]: Assigned to RFS process 3380
RFS[18]: Identified database type as 'physical standby': Client is ARCH pid 5780
RFS[18]: Selected log 4 for thread 1 sequence 36 dbid 196575176 branch 784736843
Thu May 31 23:30:45 2012
Archived Log entry 9 added for thread 1 sequence 36 ID 0xbb7cbc8 dest 1:
Thu May 31 23:30:45 2012
RFS[19]: Assigned to RFS process 4968
RFS[19]: Identified database type as 'physical standby': Client is LGWR ASYNC pid 5072
Primary database is in MAXIMUM PERFORMANCE mode
RFS[19]: Selected log 4 for thread 1 sequence 37 dbid 196575176 branch 784736843
Thu May 31 23:30:46 2012
RFS[20]: Assigned to RFS process 4996
RFS[20]: Identified database type as 'physical standby': Client is ARCH pid 5192
Thu May 31 23:30:47 2012
Archived Log entry 10 added for thread 1 sequence 37 ID 0xbb7cbc8 dest 1:
RFS[19]: Selected log 4 for thread 1 sequence 38 dbid 196575176 branch 784736843
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001 (162 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4996.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4996.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:30:48 2012
RFS[21]: Assigned to RFS process 4508
RFS[21]: Identified database type as 'physical standby': Client is ARCH pid 5780
Thu May 31 23:30:48 2012
RFS[22]: Assigned to RFS process 1524
RFS[22]: Identified database type as 'physical standby': Client is ARCH pid 5308
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001 (198 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4508.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4508.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001 (17296 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_1524.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_1524.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:30:51 2012
RFS[23]: Assigned to RFS process 460
RFS[23]: Identified database type as 'physical standby': Client is ARCH pid 5192
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001 (65 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_460.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_460.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:30:52 2012
RFS[24]: Assigned to RFS process 3456
RFS[24]: Identified database type as 'physical standby': Client is ARCH pid 5780
Thu May 31 23:30:52 2012
RFS[25]: Assigned to RFS process 1936
RFS[25]: Identified database type as 'physical standby': Client is ARCH pid 5308
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001 (287 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_3456.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_3456.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001 (10 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_1936.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_1936.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:30:56 2012
RFS[26]: Assigned to RFS process 5084
RFS[26]: Identified database type as 'physical standby': Client is ARCH pid 5192
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001 (193 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_5084.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_5084.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:30:57 2012
RFS[27]: Assigned to RFS process 2404
RFS[27]: Identified database type as 'physical standby': Client is ARCH pid 5780
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001 (8 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_2404.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_2404.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:36:48 2012
RFS[28]: Assigned to RFS process 2988
RFS[28]: Identified database type as 'physical standby': Client is ARCH pid 5192
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001 (162 blocks)
Thu May 31 23:36:49 2012
RFS[29]: Assigned to RFS process 4152
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_2988.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
RFS[29]: Identified database type as 'physical standby': Client is ARCH pid 5308
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_2988.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000010_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:36:49 2012
RFS[30]: Assigned to RFS process 4128
RFS[30]: Identified database type as 'physical standby': Client is ARCH pid 5780
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001 (198 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4128.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4128.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000009_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001 (17296 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4152.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4152.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000008_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:36:51 2012
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_arc2_5596.trc:
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000038_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
ARC2: Error 19504 Creating archive log file to 'F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000038_0784736843.0001'
ARCH: Archival stopped, error occurred. Will continue retrying
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_arc2_5596.trc:
ORA-16038: log 4 sequence# 38 cannot be archived
ORA-19504: failed to create file ""
ORA-00312: online log 4 thread 1: 'F:\APP\ORADATA\STAN\SRL01.LOG'
Thu May 31 23:36:53 2012
RFS[31]: Assigned to RFS process 4340
RFS[31]: Identified database type as 'physical standby': Client is ARCH pid 5192
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001 (65 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4340.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_4340.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000011_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:36:54 2012
RFS[32]: Assigned to RFS process 3080
RFS[32]: Identified database type as 'physical standby': Client is ARCH pid 5780
Thu May 31 23:36:54 2012
RFS[33]: Assigned to RFS process 3296
RFS[33]: Identified database type as 'physical standby': Client is ARCH pid 5308
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001 (287 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_3080.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_3080.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000012_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001 (10 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_3296.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_3296.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000013_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:36:55 2012
RFS[34]: Assigned to RFS process 3464
RFS[34]: Identified database type as 'physical standby': Client is ARCH pid 5192
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001 (193 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_3464.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_3464.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000014_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:36:57 2012
RFS[35]: Assigned to RFS process 6036
RFS[35]: Identified database type as 'physical standby': Client is ARCH pid 5780
Creating archive destination file : F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001 (8 blocks)
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_6036.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file f:\app\diag\rdbms\stan\stan\trace\stan_rfs_6036.trc:
ORA-00270: error creating archive log F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001
ORA-19504: failed to create file "F:\APP\PRODUCT\11.2.0\DBHOME_1\RDBMS\ARC0000000015_0784736843.0001"
ORA-27056: could not delete file
OSD-04024: Unable to delete file.
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Thu May 31 23:37:09 2012
Archived Log entry 11 added for thread 1 sequence 38 ID 0xbb7cbc8 dest 1:
Archiver process freed from errors. No longer stopped
confirmed that there is enough space and proper permission on the folder's..
someone please suggest what could have gone wrong??
Regards!Hello again;
So I both servers log_archive_dest_1 is not set?
The Oracle example is
Primary
LOG_ARCHIVE_DEST_1= 'LOCATION=/arch1/chicago/VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=chicago'
Standby
LOG_ARCHIVE_DEST_1='LOCATION=/arch1/boston/VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=boston'
If a fast recovery area was configured (with the DB_RECOVERY_FILE_ DEST initialization parameter) and you have not explicitly configured a local archiving destination with the LOCATION attribute, Data Guard automatically
uses the LOG_ARCHIVE_DEST_1 initialization parameter (if it has not already been set) as the default destination for local archiving. Also, see Chapter 15 for complete LOG_ARCHIVE_DEST_n information.
My take is since you are not using FRA this parameter is not defined by default. I would probably set it on both, but frankly I'm not sure this will solve your issue. If it does I would sure like to know about it so i can add it to my notes.
Not related to your issue
Would consider setting standby_file_management to 'Auto' on both.
Would consider setting log_archive_dest_state_2 to 'DEFER' on the Standby.
Best Regards
mseberg
Would -
What user does Oracle Streams use to apply?
Hello all,I have specified the apply_user in my stream configuration.But when I trap the user using a trigger on the streamed table. I get 'SYS' as the user who tried to replicate the record on target,not the one I specified in apply_user parameter of dbms_apply_adm.alter_apply. Any ideas why?
Hi,
Check "APPLY_USER" column from DBA_APPLY view to see what schema is being used to Apply the changes
Thanks,
Renu -
ANy thing special for Streams configuration in RAC?
We are going to configure streams in a 2 node RAC environment.
when the node goes down on which CAPTURE or APPLY or PROPAGATE runs, does it automatically failover to available to node? What kind of extra configuration should be taken care specifically for RAC to handle this scenario?I do run Streams on RAC and on non-RAC. Only thing that changes is that the node that processes the Streams is determined by the queue table node ownership and remember that v$ views will be empty on the node where the streams are not running.
-
MBean Attribute (Does not apply to application modules)
Can any one tell what this mean ?
MBean Attribute (Does not apply to application modules) :
is this means that it wont help for datasources for any J2EE application ????
Inactive Connection Timeout
The number of inactive seconds on a reserved connection before WebLogic Server reclaims the connection and releases it back into the connection pool.
You can use the Inactive Connection Timeout feature to reclaim leaked connections - connections that were not explicitly closed by the application. Note that this feature is not intended to be used in place of properly closing connections.
When set to 0, the feature is disabled.
MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.InactiveConnectionTimeoutSeconds
Minimum value: 0
Maximum value: 2147483647Yes!, they do not apply for any applications they are management interfaces, internal to weblogic.
Below is the brief information about it:
A managed bean (MBean) is a Java bean that provides a Java Management Extensions (JMX) interface. JMX is the J2EE solution for monitoring and managing resources on a network.
BEA WebLogic Server provides a set of MBeans that you can use to configure, monitor, and manage WebLogic Server resources through JMX. This reference document organizes WebLogic Server MBeans into the following categories:
MBeanServer Services, which serve as your entry point into navigating the MBean hierarchies. Some of these MBeans contain attributes and operations for managing changes to WebLogic Server configuration MBeans.
Configuration MBeans, which expose attributes and operations for configuring WebLogic Server resources.
Runtime MBeans, which provide information about the runtime state of its resources.
New MBeans, which have been added in the current release of WebLogic Server. These new MBeans are also listed in other categories in this document (for example, new runtime MBeans are also listed under the Runtime MBeans category).
Deprecated MBeans, which are deprecated in the current release of WebLogic Server. -
Capture streaming does not work after upgrade of the source database.
Hello,
We have a complex system with 2 X RAC databases 10.2.0.4 (source) and 2 X single databases (target) 11.2.0.2
Streaming is running only from source to target.
After upgrading RAC databases to 11.2.0.2 , streaming is working only from one RAC to one single database.
First RAC streaming is flowing to first single database only, and second RAC to second single only.
First source-target is streaming fine, second capture are aborted just after starting with following errors:
Streams CAPTURE CP05 for STREAMS started with pid=159, OS id=21174
Wed Mar 28 10:41:55 2012
Propagation Sender/Receiver (CCA) for Streams Capture and Apply STREAMS with pid=189, OS id=21176 started.
Wed Mar 28 10:43:05 2012
Streams APPLY AP05 for STREAMS started with pid=134, OS id=21696
Wed Mar 28 10:43:06 2012
Streams Apply Reader for STREAMS started AS0G with pid=191 OS id=21709
Wed Mar 28 10:43:06 2012
Streams Apply Server for STREAMS started AS04 with pid=192 OS id=21711
Wed Mar 28 10:43:30 2012
Streams CAPTURE CP05 for STREAMS with pid=159, OS id=21174 is in combined capture and apply mode.
Capture STREAMS is handling 1 applies.
Streams downstream capture STREAMS uses downstream_real_time_mine: TRUE
Starting persistent Logminer Session with sid = 621 for Streams Capture STREAMS
LOGMINER: Parameters summary for session# = 621
LOGMINER: Number of processes = 3, Transaction Chunk Size = 1
LOGMINER: Memory Size = 10M, Checkpoint interval = 1000M
LOGMINER: SpillScn 0, ResetLogScn 7287662065313
LOGMINER: summary for session# = 621
LOGMINER: StartScn: 12620843936763 (0x0b7a.84eb6bfb)
LOGMINER: EndScn: 0
LOGMINER: HighConsumedScn: 12620843936763 (0x0b7a.84eb6bfb)
LOGMINER: session_flag 0x1
LOGMINER: LowCkptScn: 12620843920280 (0x0b7a.84eb2b98)
LOGMINER: HighCkptScn: 12620843920281 (0x0b7a.84eb2b99)
LOGMINER: SkipScn: 12620843920280 (0x0b7a.84eb2b98)
Wed Mar 28 10:44:53 2012
LOGMINER: session#=621 (STREAMS), reader MS00 pid=198 OS id=22578 sid=1148 started
Wed Mar 28 10:44:53 2012
LOGMINER: session#=621 (STREAMS), builder MS01 pid=199 OS id=22580 sid=1338 started
Wed Mar 28 10:44:53 2012
LOGMINER: session#=621 (STREAMS), preparer MS02 pid=200 OS id=22582 sid=1519 started
LOGMINER: Begin mining logfile for session 621 thread 1 sequence 196589, /opt/app/oracle/admin/singledb/stdbyarch/singledb_1_196589_569775692.arc
Errors in file /opt/app/oracle/diag/rdbms/singledb/singledb/trace/singledb_ms00_22578.trc (incident=113693):
ORA-00600: internal error code, arguments: [krvxruts004], [11.2.0.0.0], [10.2.0.4.0], [], [], [], [], [], [], [], [], []
Incident details in: /opt/app/oracle/diag/rdbms/singledb/singledb/incident/incdir_113693/singledb_ms00_22578_i113693.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
krvxerpt: Errors detected in process 198, role reader.
We have 5 streaming processes running.
When we rebuilded one of them, everything works fine, but other are too big for rebuilding.
Has anybody met with such a behaviour ?
Oracle development is already working on it but we need faster solution.
Thanks
Jurraiwwn wrote:I got this after a former kernel update and I can give you only a typical windows advice: reinstall all the Bumblebeestuff after uninstallation and after a reboot. Sounds strange but worked for me.
What exactly did you reinstall? I am experiencing the same problem. -
Complete Removal of Stream Configuration in 9.2
Could any one send me the script for complete removal of streams configuration in oracle 9i database. I faces a lot of error while creating stream configuration.
Hi,
Agree with Willard Martin. If you want to a DAG member, you need to remove database copies first, then you can remove the Mailbox Server from the DAG.
Here is a related article for your reference. Even though this article is for Exchange 2013, it also applies to Exchange 2010.
http://exchangeserverpro.com/exchange-2013-how-to-remove-dag-member/
Best regards,
Belinda Ma
TechNet Community Support -
UDI wizard is not applying TimeZone setting (MDT2013)
Hi All,
I am working on MDT2013 to create Windows7-64bit Image for OEM vendor. Note:- I am not using any SQL database.
I have customized the UDIWizard_Config.xml where it should ask for UIlanguage, Inputlocale and Timezone. I am calling this UDI wizard xml in Tasksequence after gathering locally here the problem is after completing the build its not applying the Timezone
setting in image.
Any one aware about this issue? why UDI wizard is not applying the Timezone setting in image?
I have attached the below UDI wizard XML. please answer and ask if you require any more details..
<?xml version="1.0" encoding="UTF-8"?>
-<Wizard>
-<DLLs>
<DLL Name="OSDRefreshWizard.dll"/>
<DLL Name="SharedPages.dll"/>
</DLLs>
-<Style>
<Setter Property="bannerFilename">UDI_Wizard_Banner.bmp</Setter>
<Setter Property="title">Operating System Deployment (OSD) Wizard</Setter>
</Style>
-<Pages>
-<Page Name="WelcomePage" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
-<Fields>
-<Field Name="WelcomeText" Summary="" Enabled="true">
<Default> Welcome to the Deployment Wizard. This wizard will walk you through a series of screens that will allow you to choose Language type. Click on the 'Next' button to start your selected language pack installalation. Please allow 1 hours for installation. If you need support during this process, please e-mail your system administrator. </Default>
</Field>
</Fields>
</Page>
-<Page Name="ConfigScanPage" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
-<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
<Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
<Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
<Setter Property="readcfg">$LogPath$\OSDSetupWizard.xml.app</Setter>
<Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
<Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
<ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
<ExitCode Type="1" Text="One or more warnings were encountered (nonfatal) while running App Discovery. The appropriate applications may not be selected." Value="1" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Get Printers">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSD_GetPrinters.vbs /xmlout:%temp%\PrinterList.xml;$LogPath$\PrinterList.xml</Setter>
<Setter Property="BitmapFilename">images\Printers.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="1" Text="Output filename not specified correctly." Value="10" State="Warning"/>
<ExitCode Type="1" Text="Unable to create output file." Value="20" State="Warning"/>
<ExitCode Type="1" Text="An unknown error has occurred." Value="*" State="Warning"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="CheckSMSFolderOnUSB">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\CheckSMSFolderOnUSB.vbs</Setter>
<Setter Property="BitmapFilename">images\USB.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Please disconnect any USB Drives at this time, cancel the wizard, and start the task sequence over." Value="*" State="Error"/>
<Error Type="-1" Text="The path not found" Value="2" State="Error"/>
<Error Type="-1" Text="The file not found" Value="3" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
<Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Drive Encryption">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDBitlockerState.vbs %systemdrive%</Setter>
<Setter Property="BitmapFilename">images\bitlocker.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="1" Text="Drive is fully encrypted. Encryption will be paused during deployment and resumed." Value="1" State="Warning"/>
<ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="4" State="Warning"/>
<ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="5" State="Warning"/>
<ExitCode Type="-1" Text="Drive is currently encrypting. Please fully encrypt or pause encryption to continue." Value="2" State="Error"/>
<ExitCode Type="-1" Text="Drive is currently decrypting. Please fully decrypt or pause decryption to continue." Value="3" State="Error"/>
<ExitCode Type="-1" Text="A script error was detected. Please contact support to continue." Value="*" State="Error"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="ConfigScanBareMetal" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
-<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
<Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
<Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
<Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.PrestageDriveLookupTask" DisplayName="OEMMedia Lookup">
<Setter Property="BitmapFilename"/>
-<ExitCodes>
<ExitCode Type="0" Text="Success" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Error" Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
<Setter Property="readcfg">%OSDDataSourceDrive%\%OSDDataSourceDirectory%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
<Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
<ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
<ExitCode Type="0" Text="AppDiscovery exited with success as Application matching information is not available in Windows PE." Value="1" State="Success"/>
<ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="RebootPage" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
-<Fields>
-<Field Name="RebootText" Summary="" Enabled="true">
<Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
</Field>
</Fields>
</Page>
-<Page Name="WelcomePageReplace" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
-<Fields>
-<Field Name="WelcomeText" Summary="" Enabled="true">
<Default> Welcome to the Replace Wizard. This wizard will walk you through a series of screens that will allow you to customize your data and settings for USMT. After you have entered the information, the wizard will begin USMT. Click on the 'Next' button to start. Please allow 2 hours for USMT. If you need support during this process, please e-mail your system administrator. </Default>
</Field>
</Fields>
</Page>
-<Page Name="VolumePage" Type="Microsoft.OSDRefresh.VolumePage" DisplayName="Volume">
-<Fields>
<Field Name="Image" Summary="Image Selection:" Enabled="true" VarName="OSDImageIndex"/>
-<Field Name="Volume" Summary="Volume:" Enabled="true">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">There are no volumes available for installing the OS.</Setter>
</Validator>
</Field>
<Field Name="Directory" Summary="Windows Directory:" Enabled="true"/>
<Field Name="Format" Summary="Format:" Enabled="true" VarName="OSDDiskPart"/>
</Fields>
<Setter Property="MinimumVolumeSize">10</Setter>
<Setter Property="FormatWinPE">Partition and &format disk 0.</Setter>
<Setter Property="FormatFullOS">&Clean the selected volume.</Setter>
<Setter Property="FormatWinPEWarning">WARNING: Choosing this option will repartition and format disk 0!</Setter>
<Setter Property="FormatFullOSWarning">WARNING: Choosing this option will delete all data on the target volume!</Setter>
-<Data Name="ImageSelection">
-<DataItem>
<Setter Property="DisplayName">Windows 7 RTM (x86)</Setter>
<Setter Property="Index">1</Setter>
<Setter Property="Architecture">x86</Setter>
<Setter Property="ImageName">Windows 7 RTM Images</Setter>
</DataItem>
</Data>
</Page>
-<Page Name="UserRestorePage" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
-<Fields>
<RadioGroup Name="LocationGroup" Locked="false"/>
-<Field Name="TargetDrive" Enabled="true" VarName="">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
</Validator>
</Field>
-<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No valid network share.</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
<Field Name="NoDataRadio" Enabled="true" VarName=""/>
<Field Name="LocalRadio" Enabled="true" VarName=""/>
<Field Name="USBRadio" Enabled="true" VarName=""/>
<Field Name="NetworkRadio" Enabled="true" VarName=""/>
</Fields>
<Setter Property="NetworkPassword"/>
<Setter Property="NetworkUsername"/>
<Setter Property="DataSourceText">Please select a location where user data will be captured and/or restored.</Setter>
<Setter Property="Format">disable</Setter>
<Setter Property="FormatPrompt">disable</Setter>
<Setter Property="MinimumDriveSize">10</Setter>
<Setter Property="State">Restore</Setter>
<Setter Property="NetworkDrive">n:</Setter>
<Data Name="Network"/>
</Page>
-<Page Name="ComputerPage" Type="Microsoft.OSDRefresh.ComputerPage" DisplayName="New Computer Details">
-<Fields>
-<RadioGroup Name="DomainGroup" Locked="false">
<Default>Workgroup</Default>
</RadioGroup>
-<Field Name="ComputerName" Summary="Computer Name:" Enabled="true" VarName="OSDComputerName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The computer name is required. Please enter a computer name.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">The computer name is not valid. It either contains a character that isn't allowed, or is longer than 15 characters.</Setter>
<Setter Property="NamedPattern">ComputerName</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
<Setter Property="Message">One of the characters in the computer name is not valid.</Setter>
<Setter Property="InvalidChars"/>
</Validator>
</Field>
-<Field Name="DomainCombo" Enabled="true" VarName="OSDDomainName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You must select a domain.</Setter>
</Validator>
</Field>
<Field Name="DomainOUCombo" Enabled="true" VarName="OSDDomainOUName"/>
-<Field Name="WorkgroupName" Summary="Workgroup:" Enabled="true" VarName="OSDWorkgroupName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
<Setter Property="NamedPattern">Workgroup</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="Join Domain Account:" Enabled="true" VarName="OSDJoinAccount">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDJoinPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
</Fields>
<Setter Property="ADCredentialCheck" Type="boolean">true</Setter>
<Setter Property="ADComputerObjectCheck" Type="boolean">true</Setter>
<Setter Property="UseExistingComputerName" Type="boolean">false</Setter>
<Data Name="Domain"/>
</Page>
-<Page Name="AdminAccounts" Type="Microsoft.SharedPages.AdminAccountsPage" DisplayName="Administrator Password">
-<Fields>
-<Field Name="Username" Summary="Add as Administrator:" Enabled="true" VarName="OSDAddAdmin">
<Default>%OSDJoinAccount%</Default>
-<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
<Setter Property="Message">One of the characters in the Account Name(s) field is not valid.</Setter>
<Setter Property="InvalidChars">/[]:|=,+*<>?"</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDLocalAdminPassword">
<Default/>
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
</Fields>
</Page>
-<Page Name="UDAPage" Type="Microsoft.OSDRefresh.UDAPage" DisplayName="User Device Affinity">
-<Fields>
-<Field Name="DeviceAfinity" Summary="" Enabled="true">
<Default>false</Default>
</Field>
-<Field Name="Username" Summary="User Device Affinity Account:" Enabled="true" VarName="SMSTSUdaUsers">
<Default>%OSDJoinAccount%</Default>
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
<Field Name="Password" Enabled="true"/>
</Fields>
</Page>
-<Page Name="LanguagePage" Type="Microsoft.OSDRefresh.LanguagePage" DisplayName="Language">
-<Fields>
-<Field Name="LanguagePack" Summary="Language Pack:" Enabled="true" VarName="UILanguage">
<Default>DE-DE</Default>
</Field>
-<Field Name="InputLocale" Summary="Locale:" Enabled="true" VarName="UserLocale">
<Default>en-US</Default>
</Field>
-<Field Name="KeyboardLocale" Summary="Keyboard Locale:" Enabled="true" VarName="KeyboardLocale">
<Default>00000409</Default>
</Field>
-<Field Name="TimeZone" Summary="Time Zone:" Enabled="true" VarName="OSDTimeZone">
<Default>Pacific Standard Time</Default>
</Field>
</Fields>
-<Data Name="LanguagePacks">
-<DataItem>
<Setter Property="DisplayName">English (United States)</Setter>
<Setter Property="Language">EN-US</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Chinese (Hong Kong S.A.R.)</Setter>
<Setter Property="Language">ZH-HK</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">German (Germany)</Setter>
<Setter Property="Language">DE-DE</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Japanese (Japan)</Setter>
<Setter Property="Language">JA-JP</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Polish (Poland)</Setter>
<Setter Property="Language">PL-PL</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Romanian (Romania)</Setter>
<Setter Property="Language">RO-RO</Setter>
</DataItem>
</Data>
</Page>
-<Page Name="ApplicationPage" Type="Microsoft.OSDRefresh.ApplicationPage" DisplayName="Install Programs">
<Setter Property="Link.Uri">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="TsAppBaseVariable">PACKAGES</Setter>
<Setter Property="TsApplicationBaseVariable">APPLICATIONS</Setter>
<Setter Property="TsWindowsAppPackageAppBaseVariable">WINDOWSAPPPACKAGEAPPS</Setter>
<Setter Property="TsAppInstall">AppInstall</Setter>
</Page>
<Page Name="SummaryPage" Type="Microsoft.Shared.SummaryPage" DisplayName="Summary"/>
-<Page Name="UserCapturePageOldPC" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
-<Fields>
<RadioGroup Name="LocationGroup" Locked="false"/>
-<Field Name="TargetDrive" Enabled="true" VarName="">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
</Validator>
</Field>
-<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No valid network share.</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
<Field Name="NoDataRadio" Enabled="false" VarName=""/>
<Field Name="LocalRadio" Enabled="false" VarName=""/>
<Field Name="USBRadio" Enabled="true" VarName=""/>
<Field Name="NetworkRadio" Enabled="true" VarName=""/>
</Fields>
<Setter Property="NetworkPassword"/>
<Setter Property="NetworkUsername"/>
<Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
<Setter Property="Format">disable</Setter>
<Setter Property="FormatPrompt">disable</Setter>
<Setter Property="MinimumDriveSize">10</Setter>
<Setter Property="State">Capture</Setter>
<Setter Property="NetworkDrive">n:</Setter>
<Data Name="Network"/>
</Page>
-<Page Name="ProgressPage" Type="Microsoft.OSDRefresh.ProgressPage" DisplayName="Capture Data">
<Setter Property="LogFilename">$LogPath$\USMTcapture.prg</Setter>
-<Tasks StatusTitle="Status" NameTitle="Task Name">
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy AppDiscovery XML">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\AppDiscoveryresult.xml.app"/>
<Setter Property="BitmapFilename">images\copy.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
<Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy Printers XML">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\PrinterList.xml"/>
<Setter Property="BitmapFilename">images\Printers.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy ProductsList">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\ProductsInstalled.txt"/>
<Setter Property="BitmapFilename">images\copy.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
<Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Run USMT">
<Setter Property="BitmapFilename">images\usmt.bmp</Setter>
<Setter Property="filename">%windir%\system32\wscript.exe</Setter>
<Setter Property="parameters">//B %ScriptRoot%\ZTIUserState.wsf /capture /OSDStateStorePath:$DriveLetter$\%OSDDataSourceDirectory% /UserDataKey:%OSDUserStateKeyPassword%</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="USMT scan state failed." Value="*" State="Error"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="RebootAfterCapture" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
-<Fields>
-<Field Name="RebootText" Summary="" Enabled="true">
<Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
</Field>
</Fields>
</Page>
-<Page Name="BitLocker" Type="Microsoft.OSDRefresh.BitLockerPage" DisplayName="BitLocker">
-<Fields>
<!-- Valid values: TPM,TPMPIN,TPMKey and ExternalKey-->
-<RadioGroup Name="BitLockerRadioGroup" Locked="false">
<Default>TPMPIN</Default>
</RadioGroup>
-<RadioGroup Name="LocationGroup" Locked="false">
<Default>AD</Default>
</RadioGroup>
-<Field Name="BitLocker" Summary="" Enabled="true" VarName="BDEInstallSuppress">
<Default>True</Default>
</Field>
-<Field Name="PIN" Summary="" Enabled="true" VarName="BDEPIN">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The PIN must not be emtpy</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">PIN should be a number between 4-20 digits</Setter>
<Setter Property="Pattern">^[0-9-]{4,20}$</Setter>
</Validator>
</Field>
-<Field Name="WaitForEncryption" Summary="" Enabled="true" VarName="OSDBitlockerWaitForEncryption">
<Default>True</Default>
</Field>
</Fields>
<Setter Property="KeyLocation"/>
</Page>
-<Page Name="Build Type" Type="Microsoft.Wizard.CustomPage" DisplayName="Build Type">
-<Fields>
-<Field Name="label3" Summary="" Enabled="true" VarName="">
<Default>Choose Language Type</Default>
</Field>
-<RadioGroup Name="Group1" Summary="ABBLan" Enabled="true" VarName="ABBLang" Locked="false">
<Default>radiobutton1</Default>
</RadioGroup>
-<Field Name="combo5" Summary="ABBLang" Enabled="true" VarName="ABBLang">
<Default>English</Default>
</Field>
</Fields>
-<Data Name="CustomFields">
-<DataItem>
<Setter Property="ControlType">label</Setter>
<Setter Property="ID">3</Setter>
<Setter Property="X">37.27</Setter>
<Setter Property="Y">3.67</Setter>
<Setter Property="Width">100</Setter>
<Setter Property="Height">12</Setter>
<Setter Property="Name">label3</Setter>
<Setter Property="Label">Choose Language Type</Setter>
</DataItem>
-<DataItem>
<Setter Property="ControlType">combo</Setter>
<Setter Property="ID">5</Setter>
<Setter Property="X">36.87</Setter>
<Setter Property="Y">21.25</Setter>
<Setter Property="Width">100</Setter>
<Setter Property="Height">12</Setter>
<Setter Property="Name">combo5</Setter>
</DataItem>
</Data>
-<Data Name="combo5">
-<DataItem>
<Setter Property="DisplayName">English</Setter>
<Setter Property="Value">0</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Chinese</Setter>
<Setter Property="Value">1</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Japanese</Setter>
<Setter Property="Value">2</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">German</Setter>
<Setter Property="Value">3</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-2</Setter>
<Setter Property="Value">4</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-3</Setter>
<Setter Property="Value">5</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-4</Setter>
<Setter Property="Value">6</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-5</Setter>
<Setter Property="Value">7</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-6</Setter>
<Setter Property="Value">8</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-7</Setter>
<Setter Property="Value">9</Setter>
</DataItem>
</Data>
</Page>
</Pages>
-<StageGroups>
-<StageGroup DisplayName="New Computer">
-<Stage Name="NEWCOMPUTER" DisplayName="New Computer">
<PageRef Page="WelcomePage"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="SummaryPage"/>
</Stage>
-<Stage Name="NEWCOMPUTER.Prestaged" DisplayName="New Computer (prestaged media)">
<PageRef Page="WelcomePage"/>
<PageRef Page="BitLocker"/>
<PageRef Page="UserRestorePage"/>
<PageRef Page="ConfigScanBareMetal"/>
<PageRef Page="ComputerPage"/>
<PageRef Page="AdminAccounts"/>
<PageRef Page="UDAPage"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="ApplicationPage"/>
<PageRef Page="SummaryPage"/>
</Stage>
</StageGroup>
-<StageGroup DisplayName="Refresh">
-<Stage Name="REFRESH" DisplayName="Refresh">
<PageRef Page="WelcomePage"/>
<PageRef Page="VolumePage"/>
<PageRef Page="UserRestorePage"/>
<PageRef Page="ConfigScanPage"/>
<PageRef Page="ComputerPage"/>
<PageRef Page="AdminAccounts"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="ApplicationPage"/>
<PageRef Page="SummaryPage"/>
</Stage>
</StageGroup>
-<StageGroup DisplayName="Replace">
-<Stage Name="REPLACE" DisplayName="Replace, in full OS">
<PageRef Page="WelcomePageReplace"/>
<PageRef Page="ConfigScanPage"/>
<PageRef Page="RebootPage"/>
</Stage>
-<Stage Name="REPLACE.WinPE" DisplayName="Replace, in WinPE">
<PageRef Page="UserCapturePageOldPC"/>
<PageRef Page="ProgressPage"/>
<PageRef Page="RebootAfterCapture"/>
</Stage>
</StageGroup>
</StageGroups>
</Wizard>I don't know much about the UDI but I think the FieldName should be TimeZoneName and not just TimeZone.
-
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
ZCM 11 Group Policies not applying to satellite servers
Hi there
We are running 2 Windows 2012 Primary Servers and a SQL 2012 Database server at our main site, all remote sites have SLES11 SP2/OES11 SP1 as satellite servers. We upgraded all servers last weekend to 11.3.1 and now have an issue with Group Policies applying to the satellites. The satellites are all set up the same with Authentication, Collection, Content and Imaging roles.
Since we upgraded Group Policies are (99% of the time) not applying on satellite sites. I have tried manually replicating content (I assume policies will come from content replication?) to the satellites - I've done this with a zac cdp replicate and zac cvc and everything seems to replicate over however I tried highlighting a satellite server and clicking on Action, Specify Content - select the Policy that is not applying and move it into the selected Content to update column and when I click finish I get the error "The Wizard cannot continue for the following reason(s): Unable to complete your request for the following reason: Error updating content"
On a managed device at the satellite site if you look at the properties of the Zenworks agent and click on Policies it has applied 4 device assigned policies successfully - Remote Management, Power Management, Application Launcher Config and Application Control Policy, also has successfully applied 3 out of the 4 User Assigned Policies - Mandatory Profile, Dynamic Local User, Application Control - but not the Windows Group Policy.
Our PCs are on Windows 8.1 and all policies were applying fine before the weekend upgrade......
Has anyone else had any experience of Group Policies not applying that could point me where to look? I have logged an SR with Novell through our reseller but as yet I am getting no response back at all, not even asking me for more information.
Many thanks
SharonSounds like you have a content replication issue more than a GPO issue.
Especially if the GPO works for locations that point to the Primaries
for Content.
Do you have throttling configured anywhere in any fashion?
You may need to increase the Replication Timeout to make sure content is
getting over to the Sats. Often increasing from 60 to 240 helps, but
watch out for throttling preventing content replication.
It is possible things are backing up.
On 7/31/2014 8:26 AM, shazzypoos wrote:
>
> I should add that when you looked at the "Click for Details" to the
> right of the Effective "Failed" status the message is "Policy
> Enforcement Failed : The action (0) threw an exception. Message (1).
> Exception (2) (grouppolicy, "None of the source locations could be
> found"
>
> Hmmmm! Currently in closest server rules there is only the server for
> the site it's on set - we do not want it to come back to the Primary for
> policies. As I say, this was working before the weekend upgrade. Thanks!
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"
Hi,
A general question about hot fix installs.
I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a bulk install during a release cycle ( a couple times a year). I just realized that NO HF's have installed since JUNE 2014. Every HF that shows up in WindowsServer2012R2 directory fail to install with a message of "The update is not applicable to your computer". Which is fine if that was true, but.... I get this message for every HF from the ISO's since June 2014. NOT one HF thinks it is applicable to my computer. Could that be the case? No HF's apply to my Server 2012 systems since June of 2014?
This is my system info, and below that is the results from attempting to install 95 HF's.
C:\TEMP>systeminfo
Host Name: MYHOST
OS Name: Microsoft Windows Server 2012 R2 Datacenter
OS Version: 6.3.9600 N/A Build 9600
OS Manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build Type: Multiprocessor Free
Registered Owner: Windows User
Registered Organization:
Product ID: 00252-80025-36226-AA727
Original Install Date: 6/13/2014, 8:04:39 AM
System Boot Time: 3/16/2015, 2:34:45 PM
System Manufacturer: Dell Inc.
System Model: PowerEdge R720
System Type: x64-based PC
Processor(s): 2 Processor(s) Installed.
[01]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
[02]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
BIOS Version: Dell Inc. 2.2.2, 1/16/2014
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (UTC-07:00) Mountain Time (US & Canada)
Total Physical Memory: 262,099 MB
Available Physical Memory: 249,337 MB
Virtual Memory: Max Size: 301,011 MB
Virtual Memory: Available: 288,015 MB
Virtual Memory: In Use: 12,996 MB
Page File Location(s): C:\pagefile.sys
Domain: mydomain.sgn
Logon Server: \\MYHOST
Hotfix(s): 25 Hotfix(s) Installed.
[01]: KB2862152
[02]: KB2868626
[03]: KB2876331
[04]: KB2888505
[05]: KB2892074
[06]: KB2893294
[07]: KB2893984
[08]: KB2898785
[09]: KB2898868
[10]: KB2898871
[11]: KB2900986
[12]: KB2901125
[13]: KB2901128
[14]: KB2909210
[15]: KB2909921
[16]: KB2912390
[17]: KB2916036
[18]: KB2919442
[19]: KB2922229
[20]: KB2923392
[21]: KB2925418
[22]: KB2930275
[23]: KB2931358
[24]: KB2931366
[25]: KB2936068
Network Card(s): 6 NIC(s) Installed.
[01]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: ISCSI
DHCP Enabled: No
IP address(es)
[01]: 192.168.1.30
[02]: fe80::38c9:e59c:5ac2:e0a1
[02]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: NIC3
Status: Hardware not present
[03]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: MGMT
DHCP Enabled: No
IP address(es)
[01]: 7.48.64.32
[02]: 7.48.64.30
[03]: fe80::f14e:9339:9326:c7fd
[04]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 1_swport_VMRepwan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
[05]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: NIC2
Status: Hardware not present
[06]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 2_swport_VMOpswan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
Hyper-V Requirements: A hypervisor has been detected. Features required for
Hyper-V will not be displayed.
I have a script that runs each HF install.. If I run them manually without the tool I get the same results so it is not the script..
Installing 95 patches
for Microsoft Windows Server 2012 R2 Datacenter x64
Repository path: U:\Patch Repository_4_1\2012_R2_HFs\
1. Windows8.1-KB2894852-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
2. Windows8.1-KB2894856-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
3. Windows8.1-KB2920189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
4. Windows8.1-KB2926765-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
5. Windows8.1-KB2928120-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
6. Windows8.1-KB2931358-x64.msu patch status: ALREADY INSTALLED - SKIPPING
7. Windows8.1-KB2931366-x64.msu patch status: ALREADY INSTALLED - SKIPPING
8. Windows8.1-KB2933826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
9. Windows8.1-KB2939576-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
10. Windows8.1-KB2953522-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
11. Windows8.1-KB2957151-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
12. Windows8.1-KB2957189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
13. Windows8.1-KB2957689-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
14. Windows8.1-KB2961072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
15. Windows8.1-KB2961887-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
16. Windows8.1-KB2962872-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
17. Windows8.1-KB2964718-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
18. Windows8.1-KB2964736-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
19. Windows8.1-KB2965788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
20. Windows8.1-KB2966072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
21. Windows8.1-KB2966826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
22. Windows8.1-KB2966828-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
23. Windows8.1-KB2971850-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
24. Windows8.1-KB2972213-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
25. Windows8.1-KB2972280-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
26. Windows8.1-KB2973114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
27. Windows8.1-KB2973201-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
28. Windows8.1-KB2973351-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
29. Windows8.1-KB2974008-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
30. Windows8.1-KB2976627-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
31. Windows8.1-KB2976897-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
32. Windows8.1-KB2977292-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
33. Windows8.1-KB2977629-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
34. Windows8.1-KB2978668-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
35. Windows8.1-KB2982794-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
36. Windows8.1-KB2982998-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
37. Windows8.1-KB2987107-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
38. Windows8.1-KB2987114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
39. Windows8.1-KB2988948-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
40. Windows8.1-KB2992611-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
41. Windows8.1-KB2993651-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
42. Windows8.1-KB2993958-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
43. Windows8.1-KB3000061-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
44. Windows8.1-KB3000483-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
45. Windows8.1-KB3000869-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
46. Windows8.1-KB3001237-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
47. Windows8.1-KB3002657-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
48. Windows8.1-KB3002885-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
49. Windows8.1-KB3003057-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
50. Windows8.1-KB3003381-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
51. Windows8.1-KB3003743-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
52. Windows8.1-KB3004150-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
53. Windows8.1-KB3004361-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
54. Windows8.1-KB3004365-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
55. Windows8.1-KB3005607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
56. Windows8.1-KB3006226-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
57. Windows8.1-KB3008923-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
58. Windows8.1-KB3008925-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
59. Windows8.1-KB3010788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
60. Windows8.1-KB3011780-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
61. Windows8.1-KB3013126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
62. Windows8.1-KB3013455-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
63. Windows8.1-KB3014029-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
64. Windows8.1-KB3018943-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
65. Windows8.1-KB3019215-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
66. Windows8.1-KB3019978-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
67. Windows8.1-KB3020393-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
68. Windows8.1-KB3021674-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
69. Windows8.1-KB3021952-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
70. Windows8.1-KB3023607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
71. Windows8.1-KB3036197-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
72. Windows8.1-KB3021953-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
73. Windows8.1-KB3022777-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
74. Windows8.1-KB3023266-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
75. Windows8.1-KB3023562-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
76. Windows8.1-KB3024663-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
77. Windows8.1-KB3029944-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
78. Windows8.1-KB3030377-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
79. Windows8.1-KB3031432-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
80. Windows8.1-KB3032323-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
81. Windows8.1-KB3032359-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
82. Windows8.1-KB3040335-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
83. Windows8.1-KB3033408-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
84. Windows8.1-KB3033889-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
85. Windows8.1-KB3034196-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
86. Windows8.1-KB3034344-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
87. Windows8.1-KB3035017-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
88. Windows8.1-KB3035034-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
89. Windows8.1-KB3035126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
90. Windows8.1-KB3035131-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
91. Windows8.1-KB3035132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
92. Windows8.1-KB3037634-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
93. Windows8.1-KB3039066-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
94. Windows8.1-KB3044132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
95. Windows8.1-KB3046049-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
Thanks,
Dave
Hi Dave,
Would you please check CBS lg file and other relevant event logs if find more clues? On current situation, please refer to following article and check if can help you.
Update is not applicable to your computer- but it is
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
How can I sync my iPod Classic with iTunes 11.1.4 and Windows 7 64-bit?
After assistance from ‘b Noir’ (and losing--then finally regaining--my DVD/CD reader in the process), I finally installed the iTunes Version 11.1.4 update on my Windows 7 64-bit PC. So I am again able to import music from CDs, play music on my PC wi
-
In Apple store I was not able to update my software and ther was an error whenever i tried to update it ,error is 13
-
Control Panel on HP Photosmart Plus e-All-in-One Printer - B210
The touch screen control panel on my HP Photosmart Plus e-All-in-One Printer - B210 has stopped working. I am able to use the Home button and others around the touch screen, but when I touch something on the screen it will not work. Any suggestions?
-
No COPA document for Cost of Goods Sold
I am using both account-based and costing-based COPA. All transactions from SD billing and FI are posted to COPA. However, document type WL (goods issue/delivery) does not create a profitability analysis document even if the profitability segment in
-
ITS URGENT QUES ON AT LINE-SELECTION AND AT USER-COMMAND
ITS URGENT...WHEN I SELECT MULTIPUL VALUES IN BASIC LIST ,I HAVE TO GET THOSE SELECTED MULTIPUL VALUES IN SECONDARY LIST THAT CAN BE AFTER(AT LINE-SELECTION OR AT USER-COMMAND)............?