Stroke weight on table doesn't match non-table strokes?
Hi,
I've experienced this anomoly in CS2 and CS3.
If I set a table stroke to 0.25, and place a "non-table" stroke (eg. a line or paragraph rule) close to this table for comparison, also set to 0.25, then export to PDF and print the result, the table stroke is noticeably heavier than the other strokes. On screen (both in Indesign and Acrobat) the lines appear identical - the difference is only apparent in the print. The effect is more noticeable on strokes set to a colour other than 100% black (probably because a dot pattern is used to print rather than solid toner).
To compensate for this, I find setting the other strokes to about 0.35 gives the same appearance as a table stroke set to 0.25.
This is quite odd, isn't it?
It could be an issue with the printer (Fuji-Xerox DocuColor 5065), but I'd appreciate it if someone could check and see if they get the same result.
Thanks,
Pete.
Thanks for the reply, Scott.
This is a universal problem - all table strokes are slightly heavier than they should be.
It doesn't matter what the stroke weight is set to - it's just most noticeable with a fine stroke such as 0.25.
After some more tests, I've found that PDFs coming out of Indesign (all flavours), prints directly from Indesign, and artwork printed to Postscript from Indesign and then run through Distiller display this problem. However, PDFs opened and then resaved from Illustrator print with the table strokes at the correct weight.
So I'm concluding that the problem is with the Indesign PDF/printing engine.
Can anyone add anything further? Is this bug documented?
Similar Messages
-
How to insert the data if the data in the two tables doesn't match.
Hi,
I have requirement like,I have to insert the data by comparing the two tables based on the date field.If they both are equal then the data shouldn't be inserted if not the data has to be inserted.
Can some one help me on this ASAP.
Regards,
Sudha
sudhaHi,
Thanks for the reply,i would like to know the way that we can design the packages
sudha
You have multiple ways of implementing this
1. Using Lookup Task
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
2. using SCD wizard
http://www.bimonkey.com/2009/07/the-slowly-changing-dimension-transformation-part-1/
3. using hashing
http://visakhm.blogspot.in/2014/06/ssis-tips-implementing-scd.html
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
"Create Data Warehouse Tables" doesn't create any tables ?
We are attempting to install and configure OBIA 7.9.6 for Peoplesoft 8.9. The steps to install and configure Informtica and DAC and their respective repositories are completed. However, Step 4.12 to Create Data Warehouse Tables on Oracle database, although apparently successful (returns no error) does not create any tables or other objects in the datawarehouse schema. Apparently, "oracle_bi_dw.ctl" is being generated with NO DDL definitions only a two line header to the effect
[DDL File]
Version = 1Has anyone encountered a similar issue and resolved it ? (We have an SR open with Oracle Support).
NOTE : ddlimp does connect succesfully to the database -- I created a Database ON LOGON trigger to catch and trace logons by the datawarehouse schema.
Hemant K Chitale
Edited by: Hemant K Chitale on Nov 20, 2009 11:54 AMClosing this thread.
A Reinstall worked. -
Error: The decapsulated inner packet doesn't match the negotiated policy in the SA
I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul -
Image in Lightroom doesn't match exported image viewed in Photoshop
After all my hard work in Lightroom, I export the image to a folder on my hard drive. When I open this exported image in Photoshop and view it alongside the Lightroom version of its "twin" in Lightroom, there is a significant difference. Why is this? I want to use these images in my books, but my time is wasted if I end up with anything other than what I created in Lightroom. Shouldn't these images match exactly?
Thanks Jao and Michael...the color management idea makes a lot of sense.
Adding to this idea, when I open the Pshop file I get a message about the doc having an embedded profile that doesn't match current RGB working space, and the usual 3 options: Use the embedded profile, Convert color to the working space, or discard embedded profile. No matter which option I choose, none of the opened docs match the Lightroom version.
The color balance is fine, but the colors aren't as vibrant. The Pshop photo is dull and lifeless compared to the Lightroom version. I used Clarity which added subtle brightness, and Vibrance to crank up the color in LR which added wonderful dimensionality and punch to the landscape scene, but the Pshop version has dulled these back down. -
How to value non-table items in Forms
Portal 3.0.7.6.2 on NT
I am trying to display non-table items on a Form. I want to do things like: Display the Credit Card Type (non-table item) based on the Credit Card Number (table column). Use a foreigh key (table column) to retrieve related data for display/information only on the Form. The doesn't appear to be p_session variables for these 'added' Form items so I can't use the p_session functions. Any ideas??? I'd prefer a PL/SQL solution.Hi Michael,
As Dmitry said that values for non table form field cannot be displayed completely using pl/sql, u can use some pl/sql and some javascript to achieve this .
Say, take the example of the Emp table where I would like to display the department name for the deptno. Here I'll use pl/sql to retrieve the value of department name using the deptno and use javascript to display the results in the new field added to the form.
Steps :
1> Create a form say, on the emp table
2> In the field formatting section, add a new item of the type text box and add a javascript event onFocus and give the foll javascript function call for the same :-
javascript:getval(this)
3> In the additional pl/sql section, for the "after displaying page ..." part we'll add the following pl/sql code :-
declare
l_dno number(4) default null;
l_desc varchar2(100);
begin
l_dno := p_session.get_value_as_NUMBER
(p_block_name => 'DEFAULT',
p_attribute_name => 'A_DEPTNO',
p_index => 1);
if l_dno is not null then
begin
select dname into l_desc
from scott.dept
where deptno = l_dno;
exception
when others then
null;
end ;
end if;
htp.p('<script>');
htp.p('function getval(ele){'| |chr(10)| |
'ele.value = "'| |nvl(l_desc,' ')| |'";}');
htp.p('</script>');
end;
4> Run the form and perform a query. Place the cursor on the desc field after the page reloads with results. The department name would come up.
Hope this helps. -
Column count doesn't match value count at row 1, unknown number of columns
Hi,
I am making a program to read data from excel files as the above and store them in tables. I have managed to read all the data from excel files as a string and store them in a table.
ID Name Salary
50 christine 2349000
43 paulina 1245874
54 laura 4587894
23 efi 3456457
43 jim 4512878
But in my project I have several other files that have same cell that are blank as the above example
ID Name Salary
50 christine 2349000
43 paulina
laura 4587894
23 3456457
43 jim 4512878
and when i ran the same program i get this exception :
SQLException: Column count doesn't match value count at row 1
SQLState: 21S01
VendorError: 1136The code for creating the table and inserting the values is above:
private static String getCreateTable(Connection con, String tablename,
LinkedHashMap<String, Integer> tableFields) {
Iterator iter = tableFields.keySet().iterator();
Iterator cells = tableFields.keySet().iterator();
String str = "";
String[] allFields = new String[tableFields.size()];
int i = 0;
while (iter.hasNext()) {
String fieldName = (String) iter.next();
Integer fieldType = (Integer) tableFields.get(fieldName);
switch (fieldType) {
case Cell.CELL_TYPE_NUMERIC:
str = fieldName + " INTEGER";
break;
case Cell.CELL_TYPE_STRING:
str = fieldName + " VARCHAR(255)";
break;
case Cell.CELL_TYPE_BOOLEAN:
str = fieldName + " INTEGER";
break;
default:
str = "";
break;
allFields[i++] = str;
try {
Statement stmt = con.createStatement();
try {
String all = org.apache.commons.lang3.StringUtils.join(
allFields, ",");
String createTableStr = "CREATE TABLE IF NOT EXISTS "
+ tablename + " ( " + all + ")";
System.out.println("Create a new table in the database");
stmt.executeUpdate(createTableStr);
} catch (SQLException e) {
System.out.println("SQLException: " + e.getMessage());
System.out.println("SQLState: " + e.getSQLState());
System.out.println("VendorError: " + e.getErrorCode());
} catch (Exception e)
System.out.println( ((SQLException) e).getSQLState() );
System.out.println( e.getMessage() );
e.printStackTrace();
return str;
private static void fillTable(Connection con, String fieldname,
LinkedHashMap[] tableData) {
for (int row = 0; row < tableData.length; row++) {
LinkedHashMap<String, Integer> rowData = tableData[row];
Iterator iter = rowData.entrySet().iterator();
String str;
String[] tousFields = new String[rowData.size()];
int i = 0;
while (iter.hasNext()) {
Map.Entry pairs = (Map.Entry) iter.next();
Integer fieldType = (Integer) pairs.getValue();
String fieldValue = (String) pairs.getKey();
switch (fieldType) {
case Cell.CELL_TYPE_NUMERIC:
str = fieldValue;
break;
case Cell.CELL_TYPE_STRING:
str = "\'" + fieldValue + "\'";
break;
case Cell.CELL_TYPE_BOOLEAN:
str = fieldValue;
break;
default:
str = "";
break;
tousFields[i++] = str;
try {
Statement stmt = con.createStatement();
String all = org.apache.commons.lang3.StringUtils.join(
tousFields, ",");
String sql = "INSERT INTO " + fieldname + " VALUES (" + all
+ ")";
stmt.executeUpdate(sql);
System.out.println("Fill table...");
} catch (SQLException e) {
System.out.println("SQLException: " + e.getMessage());
System.out.println("SQLState: " + e.getSQLState());
System.out.println("VendorError: " + e.getErrorCode());
}To be more specific the error it in the second row where i have only ID and Name in my excel file and only these i want to store. The third row has only Name and Salary and no ID. How i would be able to store only the values that i have and leave blank in the second row the Salary and in the third row the ID? Is there a way for my program to skip the blanks as empty value?
Edited by: 998913 on May 9, 2013 1:01 AMIn an unrelated observation, it appears you are creating new database tables to hold each document. I don't think this is a good idea. Your database tables should be created using the database's utility program and not programmatically. The database schema should hardly ever change once the project is complete.
As a design approach: One database table can hold your document names, versions, and date they were uploaded. Another table will hold the column names and data types. Another table can hold the data (type for all data = String). This way, you can join the three tables to retrieve a document. Your design will only consists of those three tables no matter how many unique documents you have. You probably should seek the advice of a DBA or experienced Java developer on exactly how structure those tables. My design is a rough layout. -
Getting Records Returned When Criteria Doesn't Match (Using One Query)
I have made two queries which I would like to fold into one query if possible. The first query includes all grp_id's. The second query updates grp_id's with an (active) member count. This second query has criteria in it that grabs only grp_id's that have active members. This would be similar to say, for example, a left join situation where everything is returned from table A and only those matching from table B.
The problem is that if I put these together, they have to be linked by grp_id, so obvioulsy, if I put these queries together, the only grp_id's I will get back are the ones that have active members in them, but as I mentioned, I need all grp_id's to be shown regardless of any active membership.
So, here is the code that doesn't work to give a better idea of what I want.
select g00.grp_id,
count(m06.subs_ssn)
from gmaster g00
join m_elig m06 on
g00.grp_id = m06.grp_id
and m06.eff_date < sysdate
and m06.exp_date > sysdate
and m06.stat_code = 'ACTIVE'
group by g00.grp_id
Again, this will only give me counts for grp_id's with active members in them, whereas I want all grp_id's shown and those grp_id's without active members to have a zero next to the count..
m06 gives the member data and g00 gives the grp_id data. The m06 eff_date and exp_date and stat_code as shown above determine active members..
Thanks for any suggestions..I don't know why its not working. I did make an error in the intial posting of the data which was to put NOAM in grpid 'C'. I thought this might be my error, but I corrected it and am still getting the same results.
I have repasted the DDL statements, the query I'm using, the results and also the data as it shows when I query the two tables. (my query is based off the tables created using the posted DDL).
I also posted QUERY B. Which shows that the removal of the eff_dt and exp_dt criteria allows grp_id to be posted in the results, obviously showing 1 record as I no longer am defining an ACTIVE member by having criteria as posted in QUERY A.
Is my LEFT OUTER JOIN statement written correctly?
Also of note: I could not insert the data without the apostrophes in the dates. It gave me an error (Column not allowed here). Using the apostrophes eliminates this message and allows the data insertion. At least for now its not causing an issue as the data shows correct when I query it based a simple query of the dates.
Using PL/SQL don't know if that makes a difference..?
=======================================================
DATA IN TBL: GRP_ID:
1 A
2 B
3 C
4 D
DATA IN TBL: MBR
1 MARK A Y 1/1/2011 7/1/2011
2 MARK A Y 7/1/2011 1/1/2012
3 MARTY A Y 1/1/2011 7/1/2011
4 MARTY A Y 7/1/2011 1/1/2012
5 FRANK B Y 1/1/2011 7/1/2011
6 FRANK B Y 7/1/2011 1/1/2012
7 MARY B Y 1/1/2011 7/1/2011
8 MARY B Y 7/1/2011 1/1/2012
9 JEAN C Y 1/1/2011 7/1/2011
10 JEAN C Y 7/1/2011 1/1/2012
11 NOAM D Y 1/1/2011 7/1/2011
As you can see, Mark, Marty should have 1 active record in grp_id 'A' (total 2), Frank and Mary should have 1 active record each 'B' (total 2), Jean should have 1 active record in 'C' grp_id, total 1) and Noam should have no active records.
====================================
QUERY A:
SELECT
g00.grpid,
count(m00.grpid) mbr_count
FROM
grp_id g00
left outer join mbr m00 on
g00.grpid = m00.grpid
WHERE
m00.eff_dt < sysdate
AND
m00.exp_dt > sysdate
GROUP BY
g00.grpid
QUERY A RESULTS
1 A 2
2 B 2
3 C 1
QUERY B
SELECT
g00.grpid,
count(m00.grpid) mbr_count
FROM
grp_id g00
left outer join mbr m00 on
g00.grpid = m00.grpid
GROUP BY
g00.grpid
QUERY B RESULTS:
1 A 4
2 B 4
3 C 2
4 D 1
=================================================
DDL STATEMENTS
create table mbr (mbr_name varchar(10), grpid varchar(1), stat varchar(1), eff_dt date, exp_dt date)
insert into mbr values ('MARK', 'A','Y', '01-jan-2011', '01-jul-2011')
insert into mbr values ('MARK', 'A','Y','01-jul-2011', '01-jan-2012')
insert into mbr values ('MARTY', 'A','Y','01-jan-2011', '01-jul-2011')
insert into mbr values ('MARTY', 'A','Y', '01-jul-2011', '01-jan-2012')
insert into mbr values ('FRANK', 'B','Y','01-jan-2011', '01-jul-2011')
insert into mbr values ('FRANK', 'B','Y','01-jul-2011', '01-jan-2012')
insert into mbr values ('MARY', 'B','Y','01-jan-2011', '01-jul-2011')
insert into mbr values ('MARY', 'B','Y','01-jul-2011', '01-jan-2012')
insert into mbr values ('JEAN', 'C','Y','01-jan-2011', '01-jul-2011')
insert into mbr values ('JEAN', 'C','Y','01-jul-2011', '01-jan-2012')
insert into mbr values ('NOAM', 'D','Y','01-jan-2011', '01-jul-2011')
commit -
How to adjust path stroke weight?
I'm unable to adjust the weight of a path. Here's a 40 sec video (no audio, 1920x1080) that demonstrates I know how to adjust the stroke weight on a path, followed by a demo of it not working when I try to adjust it:
http://stephenbuck.org/adobe/il-point-width/point-width.html
Here's what I do in the video:
First, on a path that allows the change:
Select an elipse.
Increase the stroke weight of the elipse.
Control-Z to undo.
Decrease the stroke weight of the elipse.
The above demonstrates I know how to adjust the path weight (at least I think it does).
Next, on the path that doesn't allow the stroke width to be reduced:
Select path.
Increase stroke weight to demonstrate it increases.
Control-Z to undo.
Decrease the stroke weight to .25 to demonstrate it does not reduce in size.
And that's the problem.
What do I need to do to decrease the weight of the path I am trying to adjust?
Thanks,
BuckHi Jacob.
Yes, thank you and I've figured out what has happened. The layers panel included a layer titled "Meridians" and a sublayer titled "<Path>". Each item has an effect applied through the appearance panel, and that is what was causing the problem. I had been meatballing only the <Path> item in the layer panel, which is behind the Meridians layer item. Decreasing <Path> was not noticable because the Meridians layer item was the 5 point weight in front of it... I changed each item to contrasting colors, increased the weight of <Path> to 20pt, and then it was apparent that the Meridian layer effect was the item that needed to be resized.
Somewhere in this process I mistakenly applied the same effect to the Layer and the Path, and that's what caused my little dilemma.
Thanks to you and everyone else who participated in researching this problem. It's solved.
Buck -
Animate Stroke Weight of a vector graphic
Hi. I'm new to adobe's programs and digital art as a whole, so bare with me. I've watched all of the tutorials on adobe's website to learn my way around and am excited to utilize these new tools. I'm trying to create an idea, but am having trouble figuring out how to do is this. I would like to create an animation of a vector graphic I created, but I would like the stroke weight to increase from .001 to about .3 or so. So It would be 300 frames. I imported my AI file to AE but there was no option to adjust the stroke weight in there. Is there an easy way to go about what I'm trying to do rather than save out 300 different files and organize them into a video? It's also composed of a complex pattern brush so I think the program is working pretty hard. It takes like 10 seconds or so for a big increase in stroke weight to load, but there is lots of detail so it makes sense I guess. Thanks for your time.
Thank you. I made a simple vector to test your method. This is exactly what I was trying to do. However, I think my image is too complex for the program to handle. I waited 53 minutes for after effects to try and load the shapes before force quitting.. Do you think I need to just be more patient and give it a few hours? My other concern with that though is if it manages to load all the shapes if I'm going to be experiencing ultra lag trying to do any editing to the image once it's fully loaded. My image is metatron's cube composed of very tiny metatron cubes. I'd upload the file for someone else to experiment with but it doesn't look like these forums have attachment options. Any advice on this issue? I'm running a 2011 iMac with 16gb ram. The activity monitor only shows about 1-4gb of ram being used during this process.
-
Serial number doesn't match product
My coworker downloaded Adobe Acrobat XI Standard on our computers recently and now whenever I try to open up a PDF file a pop up screen appears with the heading "Serial Number Upgrade" asking me to chose a product and type in the serial number I have tried matching every single product option with my serial number and none of them work. The screen does say my serial number is correct but it doesn't match any of the products. I'm not sure what to do at this point...?
Ok, so what you are saying is we bought the upgraded Adobe Acrobat, but we would need to buy the previous version if we want the serial number to work?
King & Wood, P.A.
1701 Hermitage Blvd., Ste. 104
(850) 580-7711
(850) 205-4501 fax
Privileged & Confidential: This email is intended for the named recipient(s) only and may contain information that is proprietary, privileged, confidential, or otherwise legally exempt from disclosure. If you are not the named addressee, you are not authorized to read, print, retain, copy, or disseminate this message or any part of it. Nothing in this email is intended to constitute a waiver of any privilege or the confidentiality of this message. If you have received this email in error, please notify the sender immediately and delete this message. Circular 230 Disclosure:To ensure compliance with Treasury Department regulations, we advise you that, unless expressly indicated, any federal tax advice contained in this message or any attachments cannot be used for the purpose of avoiding penalties imposed by the Internal Revenue Code, or (ii) promoting, marketing, or recommending to another party any matters addressed herein -
Datawarehouse query detail report result doesn't match summary report.
Hello,
In our DW, we run a detail report query ( like below No. 1) , while in the summary report, in which the query is partially based on aggregated table T_AGG_UNC_GROSS (like below No.2), the query result doesn' match the query result of the details report. (supposed to match exactly)
To pick out the problem why summary report (like below NO.3) doesn't match details report. I put two filters in the details query with the filter is "year 2007", filter location is "California")
I can get 295 selected.
while I put above two filters in summary report, get no row selected.
I suspect aggregation table has some problem (wrong aggregated).
Is there any method I can pick out the problem behind?
thanks a lot in advance.
--1.detail report
select D1.c14 as c1,
D1.c13 as c2,
D1.c12 as c3,
D1.c11 as c4,
D1.c10 as c5,
D1.c15 as c6,
D1.c9 as c7,
D1.c8 as c8,
D1.c7 as c9,
D1.c6 as c10,
D1.c5 as c11,
D1.c16 as c12,
D1.c17 as c13,
D1.c18 as c14,
D1.c19 as c15,
D1.c4 as c16,
D1.c3 as c17,
D1.c20 as c18,
D1.c2 as c19,
D1.c21 as c20,
D1.c22 as c21,
D1.c1 as c22
from
(select /*+ full(T278878) full(T144662) full(T144546) full(T144557) full(T144665) full(T155155) */ sum(T144442.FINAL_BILL_AMOUNT) as c1,
sum(T144400.WRITE_OFF_AMOUNT) as c2,
case when T144416.FMCI_IND = 'Y' then 'Yes-fMCI' else 'No-fMCI' end as c3,
T144442.IS_FIOS_FLAG as c4,
T314105.DATE_DESC as c5,
T144442.CYCLES_DELINQUENT as c6,
T144590.DATE_DESC as c7,
T144564.DATE_DESC as c8,
T144557.LOB_CODE as c9,
case when T144442.IS_NEVER_PAY_FLAG = 1 then 'Yes-NP' else 'No-NP' end as c10,
T144416.CLASS_OF_SERVICE as c11,
T144416.ACCOUNT_NAME as c12,
T144416.BTN as c13,
T144416.ACCOUNT_NUMBER as c14,
T144634.ACCOUNT_STATUS as c15,
T144687.CSG_ID as c16,
T441666.DISCONNECT_REASON_DESC as c17,
T144612.LOB_CODE as c18,
T144612.STATE_CODE as c19,
T144640.DATE_DESC as c20,
T144586.PRIMARY_CIC_CATEGORY as c21,
T144586.SECONDARY_CIC_DESC as c22
from
V_D_STATE T144612 /* V_D_STATE_UNCGRO */ ,
D_DISCONNECT_REASON T441666 /* D_DISCONNECT_REASON_UNCG */ ,
D_CUSTOMER_SERVICES_GROUP T144687 /* D_CUSTOMER_SERVICES_GROUP_UNCGRO */ ,
V_D_ACCOUNT_STATUS_FINAL T144634 /* V_D_ACCOUNT_STATUS_UNCGRO */ ,
D_DATE T144640 /* D_DATE_UNCGRO */ ,
V_D_CARRIER_CODES T144586 /* V_D_CARRIER_CODES_UNCGRO */ ,
F_UNCOLLECTIBLES T144400 /* F_UNCOLLECTIBLES_UNCGRO */ ,
D_ACCOUNT T144416 /* D_ACCOUNT_UNCGRO */ ,
D_ACCOUNT_DETAIL T144442 /* D_ACCOUNT_DETAIL_UNCGRO */ ,
D_LINE_OF_BUSINESS T144557 /* D_LINE_OF_BUSINESS_UNCGRO */ ,
D_DATE T144564 /* D_DATE_UNCGRO_CONNECT */ ,
D_DATE T144590 /* D_DATE_UNCGRO_FINAL */ ,
D_DATE T314105 /* D_DATE_UNCGRO_DISCONNECT */
where ( T144400.ORGANIZATION_ID = T144612.ORGANIZATION_ID and T144416.ACCOUNT_STATUS_ID = T144634.ACCOUNT_STATUS_ID and T144400.WRITE_OFF_DATE = T144640.DATE_ID and T144400.CIC_CODE_ID = T144586.CIC_CODE_ID and T144416.CUSTOMER_SERVICE_GROUP = T144687.CSG_CD and T144400.ACCOUNT_ID = T144442.ACCOUNT_ID and T144400.ACCOUNT_ID = T144416.ACCOUNT_ID and T144400.DISCONNECT_DATE = T314105.DATE_ID and T144400.WRITEOFF_REFERRAL_IND = 'WRO' and T144416.DISCONNECT_REASON = T441666.DISCONNECT_REASON and T144612.U_STATE_DESC = 'California - BUSINESS' and T144640.YEAR_DESC = 'Year 2007' and T441666.DISCONNECT_REASON_DESC <> 'G' and T144416.FINAL_BILL_DATE = T144590.DATE_ID and T144416.CONNECTION_DATE = T144564.DATE_ID and T144416.LOB_ID = T144557.LOB_ID and T441666.DISCONNECT_REASON_DESC <> 'H' )
group by T144416.ACCOUNT_NAME, T144416.ACCOUNT_NUMBER, T144416.BTN, T144416.CLASS_OF_SERVICE, T144442.IS_FIOS_FLAG, T144442.CYCLES_DELINQUENT, T144557.LOB_CODE, T144564.DATE_DESC, T144586.PRIMARY_CIC_CATEGORY, T144586.SECONDARY_CIC_DESC, T144590.DATE_DESC, T144612.LOB_CODE, T144612.STATE_CODE, T144634.ACCOUNT_STATUS, T144640.DATE_DESC, T144687.CSG_ID, T314105.DATE_DESC, T441666.DISCONNECT_REASON_DESC, case when T144416.FMCI_IND = 'Y' then 'Yes-fMCI' else 'No-fMCI' end , case when T144442.IS_NEVER_PAY_FLAG = 1 then 'Yes-NP' else 'No-NP' end
) D1;
295 rows selected.
--2. aggregation table T_AGG_UNC_GROSS
create table T_AGG_UNC_GROSS parallel nologging as
SELECT a.account_id,a.ORGANIZATION_ID,a.UNC_LOB_ID,
MAX (a.WRITEOFF_REFERRAL_IND) AS WRITEOFF_REFERRAL_IND,
MAX (a.WRITE_OFF_DATE) AS WRITE_OFF_DATE,
COUNT (1) AS NO_OF_UNC,
MAX(a.DISCONNECT_DATE) as DISCONNECT_DATE,
sum(a.WRITE_OFF_AMOUNT) as WRITE_OFF_AMOUNT
FROM f_uncollectibles a
GROUP BY a.account_id,a.ORGANIZATION_ID,a.UNC_LOB_ID;
---3. sumarry resport (query)
select SUBSTR (f.WRITE_OFF_DATE, 5, 2)
|| '/'
|| SUBSTR (f.WRITE_OFF_DATE, 7, 2)
|| '/'
|| SUBSTR (f.WRITE_OFF_DATE, 0, 4)
writeoff_date,
'ALL CIC',
o.U_STATE_DESC,
s.U_ACCOUNT_STATUS,
rl.RISK_LEVEL,
d.Amount_Range_ID || ' - WR',
f.WRITEOFF_REFERRAL_IND,
fi.fios_flag_desc,
DR.DISCONNECT_REASON || '-' || DR.DISCONNECT_REASON_DESC,
b.BEHAVIOR_SCORE || ' - B',
cs.csg_cd || ' - CG',
CASE WHEN d.IS_NEVER_PAY_FLAG = 1 THEN 'Yes-NP' ELSE 'No-NP' END
AS Neverpay_Ind,
CASE WHEN u.FMCI_IND = 'Y' THEN 'Yes-fMCI' ELSE 'No-fMCI' END
AS FMCI_IND,
lob.DESCRIPTION,
COUNT (f.Account_id) No_of_Accounts,
SUM (d.NO_DENIAL_NOTICES) NO_DENIAL_NOTICES,
SUM (d.CYCLES_DELINQUENT) CYCLES_DELINQUENT,
sum(f.WRITE_OFF_AMOUNT) WRITE_OFF_AMOUNT ,
sum(d.FINAL_BILL_AMOUNT) FINAL_BILL_AMOUNT
FROM t_agg_unc_gross f,
d_account u,
d_account_detail d,
D_DISCONNECT_REASON DR,
d_writeoff_amount_range a,
v_d_account_status_final s,
D_BEHAVIOR_RANGE b,
v_d_state o,
d_Fios_Indicator fi,
d_risk_level rl,
d_customer_services_group cs,
D_UNCOLLECTIBELS_LOB lob,
D_DATE
WHERE f.account_id = u.account_id
AND u.account_id = d.account_id
AND d.Amount_Range_ID = a.wo_range_id
AND d.IS_FIOS_FLAG = fi.FIOS_FLAG
AND u.Account_Status_ID = S.ACCOUNT_STATUS_ID
AND u.RISK_LEVEL_ID = rl.risk_level_id
AND o.organization_id = f.organization_id
AND dr.DISCONNECT_REASON = u.DISCONNECT_REASON
AND d.BEHAVIOR_SCORE12 = b.BEHAVIOR_SCORE
AND u.CUSTOMER_SERVICE_GROUP = cs.csg_cd
AND Dr.disconnect_reason NOT IN ('H', 'G')
AND lob.LOB_UNC_ID =f.UNC_LOB_ID
AND o.U_STATE_DESC = 'California - BUSINESS'
AND D_DATE.YEAR_DESC = 'Year 2007'
and u.FINAL_BILL_DATE = D_DATE.DATE_ID
--and u.CONNECTION_DATE = D_DATE.DATE_ID
GROUP BY SUBSTR (f.WRITE_OFF_DATE, 5, 2)
|| '/'
|| SUBSTR (f.WRITE_OFF_DATE, 7, 2)
|| '/'
|| SUBSTR (f.WRITE_OFF_DATE, 0, 4),
'ALL CIC',
o.U_STATE_DESC,
s.U_ACCOUNT_STATUS,
rl.RISK_LEVEL,
d.Amount_Range_ID || ' - WR',
f.WRITEOFF_REFERRAL_IND,
fi.fios_flag_desc,
DR.DISCONNECT_REASON || '-' || DR.DISCONNECT_REASON_DESC,
b.BEHAVIOR_SCORE || ' - B',
cs.csg_cd || ' - CG',
lob.DESCRIPTION,
CASE WHEN d.IS_NEVER_PAY_FLAG = 1 THEN 'Yes-NP' ELSE 'No-NP' END,
CASE WHEN u.FMCI_IND = 'Y' THEN 'Yes-fMCI' ELSE 'No-fMCI' END;
no row selected.
Edited by: ROY123 on Jul 23, 2010 12:17 PMfixed.
-
CS6: Object Find/Change-Stroke weight?
Hi all,
First time using the find/change Object query in CS6.
I'd like to search for and decrease a specific stroke weight on all frames in my document (in this case they are all graphic frames, but I'm unable to get it to work)
I've tried searching for all frames, text frames, graphic frames, within the Document, but the query is not finding any of the bad strokes. (I watched a Lynda.com tutorial and it looked so easy, but I can't figure out why it isn't searching for them. (none of the objects are locked)
Is there an attribute I need to uncheck in the Find Object Format Options to ensure it only searches of the stroke? Thanks for any input.
Here's an example:Thank you! That worked.
-
Setting stroke weight of adiacent cell
Hello,
I would like to know if there's a way to do this:
I have a series of tables which have to be formatted in a specific way. Unfortunately, with the table formatting options I'm able to do only a part of these formattings; so the question is: how can I set the stroke weight of a cell border based on an adiacent cell?
See attached image for explanation
Hope someone can help me!
Thanks in advanceHi,
since nobody gave me answer, I answered myself with this JavaScript:
var myDoc = app.activeDocument;
var totTxtFrames = myDoc.textFrames;
for(i=0; i<totTxtFrames.length; i++){
myTxtFrame = totTxtFrames[i];
totTables = myTxtFrame.tables;
for(j=0; j<totTables.length; j++){
myTable = totTables[j];
totRows = myTable.rows;
for(k=0; k<totRows.length; k++){
myRow = totRows[k];
myRowIndex = myRow.index;
totCells = myRow.cells;
for(n=0; n<totCells.length; n++){
myCell = totCells[n];
if(myCell.rowSpan > 1){
myCellSpan = myCell.rowSpan;
if(myCell.bottomEdgeStrokeWeight == 0.5){
totRows.item(myRowIndex + myCellSpan - 1).bottomEdgeStrokeWeight = 0.5;
else{
myCellSpan = myCell.rowSpan;
if(myCell.bottomEdgeStrokeWeight == 0.5){
totRows.item(myRowIndex + myCellSpan - 1).bottomEdgeStrokeWeight = 0.5;
Hope might help someone with the same problem
Cheers! -
Why are my stroke weights not scaling?
I'm new to InDesign. Just installed it and playing for the first time.
I'm having issues with scaling the stroke weight of vector objects. I create an object or path, but when I go to scale it, the weight doesn't scale too. I've made sure that the 'adjust stroke weight when scaling' is ticked.
What am I doing wrong?
Really appreciate any help I can get on this.
ThanksThere have been several discussions reporting the same problem.
Re: Photos with iOS8.1 Event and Face out of sequence
There is no known fix. Send feedback to Apple to request a better photo sync, that will respect the sorting of faces albums.
http://www.apple.com/feedback/iphoto_ios.html
Maybe you are looking for
-
I'm pretty sure I have used hyperlinks from the Mac Mail program since I upgraded to Firefox 32. A couple days ago, when I clicked on a link in an email, it jumps to Firefox but no new tab with web page opens. If I close Firefox, then clink on the li
-
Cannot use loopback address in jmf audio receiver
Hello, i am using the code from http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVReceive.html about transmitting and receiving audio data. It works fine but if i use a 127.0.0.1 address the receiver cannot connect to the audio streamer.
-
SQL Server 2012 Licensing Development - Production
I currently have 4 environments dev, qa ,staging and production each has a separate SQL 2012 instance on its own server (4 Instances). My question is on licensing SQL Server and when developers edition licensing can be used and when it become produc
-
Why does my itunes summary show so much in the 'other' tab
while tryng to synch my iphone, it told me i didnt have enough room for my 5 new songs, that i need over 3mb to do this. then i took a whole bunch of stuff off my phone including ALL of my music, (and fb!)and the 'other' in my summary tab shot up to
-
What does GarageBand have that Soundtrack Pro doesn't?
I'd like to see an up-to-date list of functionality that is available in GarageBand but not in Logic Pro or Soundtrack Pro. Can anyone direct me to such a list already on-line, or name some items? I've seen the old "STP - Logic - GarageBand Compatibi