Structure of DBFS file system

If we configure KM to use a CM repository in DBFS mode, will the files be all stored in a single folder or will the repository manager distribute the files amongst multiple folders?
Thanks.
Regards,
Mel Calucin
Bentley Systems

Hi Michael,
Thanks for the response.
Our data center manager is concerned about any system that would just store all files in a single folder with no hierarchy and not in some folder hierarchy. He had issues with Siebel when it did this. He has no intention of manipulating the files or file structures. As long as it has some folder structure, he is ok with this solution. Please confirm that this is the case.
Thanks.
Regards,
Mel Calucin
Bentley Systems, Inc.

Similar Messages

Data Structure of ReFS file system

Hi All
Is there anyone who can explain Data Structure of ReFS file system
Regards

Hi,
Resilient File System (ReFS) is a new file system, it is a cost-effective platform that maximizes data availability, scales efficiently to very large data sets across diverse workloads, and guarantees data integrity by means of resiliency to corruption (regardless
of software or hardware failures).
The following link can also be helpful for you:
http://blogs.msdn.com/b/b8/archive/2012/01/16/building-the-next-generation-file-system-for-windows-refs.aspx
https://technet.microsoft.com/en-in/library/hh831724.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/askpfeplat/archive/2013/01/02/windows-server-2012-does-refs-replace-ntfs-when-should-i-use-it.aspx
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Detailed Data Structure of ReFS file system in context of Forensic analysis

Hi
Please explain detailed Data Structure of ReFS file system in context of Forensic analysis ?
Regards

Hi，
I am not expert about this, this page links to ReFS resources that include Microsoft documentation
As of today, ReFS is only available in Windows Server 2012 and ReFS is expected to be part of the flagship Windows desktop OS.
Resilient File System Overview
https://technet.microsoft.com/en-us/library/hh831724.aspx?f=255&MSPPError=-2147217396
Improve File Server Data Resiliency with ReFS in Windows Server 2012
http://blogs.technet.com/b/keithmayer/archive/2012/10/15/refs-in-windows-server-2012.aspx#.Ug0MvpLksaQ
Windows Server 2012: Does ReFS replace NTFS? When should I use it?
http://blogs.technet.com/b/askpfeplat/archive/2013/01/02/windows-server-2012-does-refs-replace-ntfs-when-should-i-use-it.aspx
Resilient file system, MSDN reference
https://msdn.microsoft.com/en-us/library/windows/desktop/hh848060%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
forensic images of ReFS volumes, and data structures.
http://www.williballenthin.com/forensics/refs/
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Creation of oracle directory structure on mounted file system in linux

Hi,
I need to use datapump utility for which directory structure would be required. since my dump files are stored another system i usually mount the file system, can i create oracle directory structure on mounted filesystem in linux? do suggest urgently. thanks in advance.

Yes you can why not

Show tree folder structure of file system directory

Hi,
I am new to flex.
I am using AS3
I am creating web application.
I want to show the tree directory structure of the file system similar to what we seen in applet.
Is there any component in flex, which will do that?
Can it be possible in web application?
Thanks,
Tushar

Hi,
Use the FileSystemView class of javax.swing.filechooser
create an instance of the view and choose the method:
File root = FileSystemView.getHomeDirectory();as your root file object.
Maybe you need to do some modifications on your FileTreeModel...
under windows the desktop node and the first level nodes down from there
are not real file-objects ...
Olek

STORE A COMPLETE FILE SYSTEM IN THE DATABASE 11GR2

Hi everyone
I have the following issue:
I tried to store in an oracle database TABLE the completre file structure
of a file system that includes the follwing:
-Name of the file
-Date of last modification
-Location
-The entire content of the phisical file BLOB datatype
I have the following piece of code to archieve this, but i still have a
problem...
When i tried to add the records to the database by implememting all
the connecttions stuffs, oracle and java classes required the program
inserts a FEW RECORDS and after that:
¡¡¡hangs up!!!.
The main problem is that i cant release the connection and get another new when i using
JDBC POOL so the server full their available connections.
Please tell me what is the best approach or programming practice on order to
meet this goal.
Thanks from Colombia - Latin America..
HERE IS THE CODE:
import java.io.* ;
* A simple class to demonstrate a recursive directory traversal
* in Java.
* Error handling was left out to make the code easier to understand.
* In production code, you should check if the arguments from the
* command line are really file files or directories.
public class RecursiveTraversal
* Works on a single file system entry and
* calls itself recursively if it turns out
* to be a directory.
* @param file A file or a directory to process
public void traverse( File file )
// Print the name of the entry
//System.out.println( file ) ;
// Check if it is a directory
if( file.isDirectory() )
// Get a list of all the entries in the directory
String entries[] = file.list() ;
// Ensure that the list is not null
if( entries != null )
// Loop over all the entries
for( String entry : entries )
// Recursive call to traverse
traverse( new File(file,entry) ) ;
else
if(file.isFile())
System.out.println( file.getParent() ) ;
System.out.println( file.getName() ) ;
else
System.out.println("*** WRONG VALUE ***");
* The program starts here.
* @param args The arguments from the command line
public static void main( String args[] )
// Create an object of this class
RecursiveTraversal rt = new RecursiveTraversal() ;
if( args.length == 0 )
// If there are no arguments, traverse the current directory
rt.traverse( new File(".") ) ;
else
// Else process every argument sequentially
for( String arg : args )
rt.traverse( new File(arg) ) ;
}

Thanks for the reply, the implementation that you refer is useful for another type of application i need to stored the file system in a TABLE of a database
in order to make a part of an information system integration and can use SQL statements to acomplish this.
I follow the recomendation and post it in the SQL/JDBC forum because when i try to release de active connection i can't acomplish this.
And i need to know how to use JDBC connection poolling to open a connection just once, release and use it again.

ODI to connect with Multiple Foxpro DBF files having same structure.

Hi Experts ,
Need your help on the situation below on ODI 11g .
I Identified my source system as Foxpro ,and there are 20000 users using this fox-pro application and each generates its own output file(zipped with dbf files ) .
Example of DBF file -> User1 : daccount_18356.DBF , User2 :daccount_17536.DBF and goes on ....
1. Please recommend how do i connect or automate this DBF files ?
2. Also its having different file name per user but having same format . ?
Please let me know if any details needed further .
Thanks
Kenny
Edited by: 839100 on Jun 20, 2011 8:11 PM

Ashish,
I have similar issue. we are loading multiple files and getting "java.sql.SQLException: ORA-00942: table or view does not exist" error while inserting a record into staging table. Appreciate if you or any one suggest solution.
we are using following KM-
1) LKM File to SQL
2) IKM SQL CONTROL APPEND.
Thanks

A corruption was discovered in the file system structure on volume Windows

This morning, turned on the laptop and have several instances of this error in the event viewer. Here are the details:
<script>// function f(e){ if (e.className=="ci"){if (e.children(0).innerText.indexOf("\n")>0) fix(e,"cb");} if (e.className=="di"){if (e.children(0).innerText.indexOf("\n")>0) fix(e,"db");} e.id=""; } function fix(e,cl){ e.className=cl; e.style.display="block"; j=e.parentElement.children(0); j.className="c"; k=j.children(0); k.style.visibility="visible"; k.href="#"; } function ch(e){ mark=e.children(0).children(0); if (mark.innerText=="+"){ mark.innerText="-"; for (var i=1;i<e.children.length;i++) e.children(i).style.display="block"; } else if (mark.innerText=="-"){ mark.innerText="+"; for (var i=1;i<e.children.length;i++) e.children(i).style.display="none"; }} function ch2(e){ mark=e.children(0).children(0); contents=e.children(1); if (mark.innerText=="+"){ mark.innerText="-"; if (contents.className=="db"||contents.className=="cb") contents.style.display="block"; else contents.style.display="inline"; } else if (mark.innerText=="-"){ mark.innerText="+"; contents.style.display="none"; }} function cl(){ e=window.event.srcElement; if (e.className!="c"){e=e.parentElement;if (e.className!="c"){return;}} e=e.parentElement; if (e.className=="e") ch(e); if (e.className=="k") ch2(e); } function ex(){} function h(){window.status=" ";} document.onclick=cl; // </script>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" Guid=" />
<EventID>55</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-12-26T14:26:46.034431300Z" />
<EventRecordID>4751</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="196" />
<Channel>System</Channel>
<Computer>
<Security UserID
</System>
- <EventData>
<Data Name="DriveName">Windows</Data>
<Data Name="DeviceName">\Device\HarddiskVolumeShadowCopy5</Data>
<Data Name="CorruptionState">0x0</Data>
<Data Name="HeaderFlags">0x2</Data>
<Data Name="Severity">Normal</Data>
<Data Name="Origin">File System Driver</Data>
<Data Name="Verb">Force Proactive Scan</Data>
<Data Name="Description">The exact nature of the corruption is unknown. The file system structures need to be scanned online.</Data>
<Data Name="Signature">0xe2b3f0fb</Data>
<Data Name="Outcome">Pseudo Verb</Data>
<Data Name="SampleLength">0</Data>
<Data Name="SampleData" />
<Data Name="SourceFile">0x17</Data>
<Data Name="SourceLine">193</Data>
<Data Name="SourceTag">137</Data>
<Data Name="CallStack">Ntfs+0xd88db, Ntfs+0xc0988, Ntfs+0xec781, Ntfs+0xbbef2, Ntfs+0xbc5e3, Ntfs+0xf50bb, Ntfs+0xf007d, Ntfs+0xefd53, Ntfs+0xeff5a, fltmgr+0x2d1f6, fltmgr+0x2d51b, fltmgr+0x68dc, fltmgr+0x8e10, mfehidk+0x60698, mfehidk+0x61676, mfehidk+0x61a9e, mfehidk+0x62b06, fltmgr+0x228a, fltmgr+0x37bc, fltmgr+0x192e, fltmgr+0x109e, ntoskrnl+0x3c8784, ntoskrnl+0x3eec10, ntoskrnl+0x6469f, ntoskrnl+0x433376, ntoskrnl+0x118ac4, ntoskrnl+0x136925, ntoskrnl+0xfee70, ntoskrnl+0x1557c6</Data>
</EventData>
</Event>

@shl1024 ,
Hello and thank you for posting back with the screen shot.
Now if you can boot into your system and get to the desktop. Back up all your files you do not want to loose.
Once this is done. You will want to enter the system BIOS. You should be able to access the BIOS by tapping the F10 key as soon as you see the HP welcome screen. Once you are in the BIOS you will want to run a hard drive test.
Testing a Hard Disk from the BIOS
You will want to do this to make sure the hard drive is still in good shape. If it comes up with a bunch of issues in this test. Replace.
If not run other hard drive tests.
HP Notebook PCs - Testing a Hard Disk using the Built in Self Test
Now if this finds issues then if you have everything backed up you may be able to run the Windows system recovery to put it back to the way it was out of the box.
You may just ran into an issue with corrupted data in the system file and the system is unable to read.
Here is a link to help you with the Windows System Recovery.
Performing an HP system recovery (Windows 8)
Let me know how things go and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Restore tablespace using DBF file & structure export

Hi,
we've dropped our testing database - USER & TABLESPACE. We don't have any backup (nor control file), just .DBF file and older export (emty tables, same structure).
Is any possibility to recover dropped data?

Which .dbf files do you have and are they from a cold backup? If you have all the .dbf files, you could recreate the control file and recover your data.

I want to learn File system structure of SAP .

Dear Friends,
I want to learn File system structure of SAP .
hOW I WILL BE DO.
I AM BASIS GUY SO IT REQUIRE TO ME.
THANKS,
REGARDS,
SACHIN

Hi,
Check out the following link.
It provides the Dir structure in Win as well as in UNIX.
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/5964df13e8f14a9f1151bbf65304fe/content.htm.
Else you can refer to SAP Weeks material in which it will be explained very clearly.
Cheero
Pradeep.Gali

Can I restore the copy of DBF files in other system?

I had the copy of DBF files and I want to restore them in another system. How it has to be done? I need help on this regard. Pls give me solution urgently.

There are several ways that you could do this, including using an Export and Import file, but perhaps the easiest method is to use the duplicate command in RMAN to do this, after setting certain conditions..
The you could use a command such as:
duplicate PROD database to TEST;
Take a look at the RMAN chapter on creating a duplicate database.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmdupdb.htm

EBS file system structure

Hi
I am new to EBS . Can you please let me know where can I find a document or link for EBS 11i file system structure ? I need to to know where can I find folder like APPL_TOP and JAVA_TOP , .....etc
Thanks
Edited by: user599647 on Apr 16, 2009 7:04 PM

Hi,
Please follow the the *[Oracle Apps 11i Documentation|http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html]* to clear your basic doubts. You are always welcome to have a discussion in the forum anyways.
For knowing about the different tops, refer:
*[What Different TOPs in Application 11i|http://becomeappsdba.blogspot.com/2006/08/whats-different-tops-in-application.html]*
Thanks,
Anchorage :)

Oracle XE 11g x64 does not run. No *DBF files inside of the XE folder. Windows 7 Pro x64.

Hello everyone!
I hope you are doing well all. In my case I have some troubles by installing Oracle XE 11g on my PC. My OS is Windows 7 Pro x64.
1. I activated the Administrator mode on my PC (net user Administrator /active:yes)
2. Started the setup as Administrator. The setup process was finished successfully with no errors showed.
3. Started the Database, OracleServiceXE, OracleXETNListener and other services.
4. Tried to connect using sqlplus-> connect system ->password, what in result gave me ORA-01034 Oracle not available and ORA-27101 Shared memory realm does not exist errors.
5. Then I recognized that my C:\oraclexe\app\oracle\oradata\XE folder is empty when it should be usually full with 6 DBF file.
6. I opened the cloneDBCreation.log and it contains these data:
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-12560: TNS:protocol adapter error
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora";
ORA-12560: TNS:protocol adapter error
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> alter system enable restricted session;
SP2-0640: Not connected
SQL> alter database "XE" open resetlogs;
SP2-0640: Not connected
SQL> alter database rename global_name to "XE";
SP2-0640: Not connected
SQL> alter system switch logfile;
SP2-0640: Not connected
SQL> alter system checkpoint;
SP2-0640: Not connected
SQL> alter database drop logfile group 3;
SP2-0640: Not connected
SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\app\oracle\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
SP2-0640: Not connected
SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
SP2-0640: Not connected
SQL> select sid, program, serial#, username from v$session;
SP2-0640: Not connected
SQL> alter user sys identified by "&&sysPassword";
SP2-0640: Not connected
SQL> alter user system identified by "&&systemPassword";
SP2-0640: Not connected
SQL> alter system disable restricted session;
SP2-0640: Not connected
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\postScripts.sql
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-12560: TNS:protocol adapter error
SQL> set echo on
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\postScripts.log
I spent around 2 days to come to this reason and now I do not know what to do next.
My actions to resolve this problem:
1. Checked if my user has administrative rights and belongs to ora_dba. It does!
2. Turned Microsoft UAC off.
3. Set the system and local variables of ORACLE_BASE, ORACLE_HOME, ORACLE_SID, PATH, TNS-ADMIN to the appropriate values in Enivornment Variables:
     - ORACLE_BASE -> C:\oraclexe
     - ORACLE_HOME -> %ORACLE_BASE%\app\oracle\product\11.2.0\server
     - ORACLE_SID -> XE
     - Added to PATH -> C:\oraclexe\app\oracle\product\11.2.0\server\bin;
     - TNS_ADMIN -> %ORACLE_HOME%\network\admin
4. Removed Oracle XE 11g and reinstalled to another drive. No sense!
Some more errors:
1. C:\oraclexe\app\oracle\product\11.2.0\server\config\log\XE.bat.log
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Ein Mitglied konnte in der lokalen Gruppe nicht hinzugefugt oder entfernt werden, da das Mitglied nicht vorhanden ist.
It means -> O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
I understand that I need to logon as batch job. I added me to this policy in User Rights Assignments, but still I get these "DIM-00019: create service error" and "O/S-Error: (OS 1387)". And I guess just therefore my database is not starting well.
2. 127.0.0.1:8080/apex/f?p=4950 is not starting in browser. It is probably because the database is not running appropriately. For this issue have already seen one topic in Google that the HTTP Properties inside the Listener Status must be set to 8080 to make this link work. But in my case I do not see this line in my Listener Status:
Some other information relevant to the issue:
1) echo %USERNAME% - Administrator
     echo %USERDOMAIN% - ildar-PC
2) Listener.log:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
3) Tnsnames.log
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
4) Sqlnet.log:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
5) While connecting by sqlplus, I get this errors/messages:
6) Confirmation that I've got admin rights and I am in ORA_DBA:
If u need some more information from me, please let me know!!
Guys please help me to solve this issue, 'cause I've almost got frustrated to find out the solution of this problem. Thank you beforehand!!
Kind regards,
ildar

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

Crystal Reports XI String [255] limit with the File System Data driver...

I was trying to create a Crystal Reports XI report to return security permissions of files and folders. I have been able to successfully connect and return data using the File System Data driver as the Data Source; however the String limit on the ACL NT Security Field is 255 characters. The full string of data to be returned can be much longer than the 255 limit and I cannot find how to manipulate that parameter.
I am currently on Crystals XI and Crystal XI R2 and have applied the latest service packs but still see the issue. My Crystal Reports Database DLL for File System data ( crdb_FileSystem.dll ) is at Product Version 11.5.10.1263.
Is it possible to change string limits when using the File System Data driver as the Data Source? If so, how can that be accomplished. If not, is there another method to retrieve information with the Windows File System Data being the Data Source? Meaning, could I reach my end game objective of reporting on the Windows ACL's with Crystal through another method?

Hello,
This is a known issue. Early versions you could not create folder structures longer than 255 characters. With the updates to the various OS's this is now possible but CR did not allocate the same space required.
It's been tracked as an enhancement - ADAPT01174519 but set for a future release.
There are likely other ways of getting the info and then putting it into an Excel file format and using that as the data source.
I did a Google search and found this option: http://www.tomshardware.com/forum/16772-45-display-explorer-folders-tree-structure-export-excel
There are tools out there to do this kind of thing....
Thank you
Don
Note the reference to msls.exe appears to be a trojan: http://www.greatis.com/appdata/d/m/msls.exe.htm so don't install it.
Edited by: Don Williams on Mar 19, 2010 8:45 AM

Structure of DBFS file system

Similar Messages

Maybe you are looking for