Studio 10 cannot get debugging information for main

Hi all,
Running Build 20040805 of Studio 10 on Solaris 9.
I cannot get the debuging info for the main routine.
I think the issue is related to the fact that the Fortran runs in a Perl wrapper, which renames the executable. It did also create a new directory for the run, but we have suppresed that.
Any ideas?
Andrew

Try using the "pathmap" command in dbx to point to the
directory where the .o files are. Normally, dbx will find
look in the a.out to find a path to the .o files. Then it will load
debugging information from the .o files.

Similar Messages

  • Itunes  11.4.0.18 crashing when clicking on app store  Itunes is getting crash when clicked on app store. I tried to get some information for this crash and got the above message in debugging mode. Please fix this if required but i am unable to open

    Itunes  11.4.0.18 crashing when clicking on app store
    Itunes is getting crash when clicked on app store. I tried to get some information for this crash and got the above message in debugging mode. Please fix this if required but i am unable to open app store.

    Click here and follow the instructions to change the iTunes Store country.
    (97125)

  • An unknown excel file has appeared on my desktop. It cannot be deleted and I cannot get any information about it. Is this malware?  How can I get rid of it?

    An unknown excel file has appeared on my desktop. It cannot be deleted and I cannot get any information about it.
    Is this malware?  How can I get rid of it?

    Hello Jeff,
    Thanks very much for your reply.  I looked over the article you mentioned, but I have tried all of these methods, but only get the response "The item “29394D00” can’t be moved to the Trash because it can’t be deleted."  Similarly, I cannot Get Info on the file.  This is why I'm so concerned, it just appeared on my desktop, but I cannot touch it, or open it or delete it...
    If you have any more tricks up your sleeve, I'd love to hear about them...
    Derek

  • I want to order a photobook, however I cannot get the option for the country MALTA

    How can I order a photobook if I reside in Malta (Europe).  I cannot get the option for my country of residence.

    The service is not available in Malta.
    Regards
    TD

  • N96 Error Cannot get enough information about the ...

    I am getting error
    "Error Cannot get enough information about the phone[3]
    "Unspecified error [1]"
    i downloaded the http://static.s2g.gate5.de/nokiamaps-client/nokia_ maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis , but i am getting no signal and i cant sync my favorites...
    anyone?

    problem solve..check this link!!!
    /t5/Maps-Navigation-and-GPS/E75-Maps-Updater-Error-Cannot-get-enough-information-about/m-p/673980

  • How to get this information for Conky

    Hi people,
    My question is how to get this information for show in Conky:
    - KDE version.
    - Last sync (pacman -Sy) and Last update (pacman -Su)
    For the first point could be use a script that execute $ kdesu --version and get information from there.
    I have no idea how get information from pacman (may be logs?).
    Any ideas?
    Thank you.

    I have had tremendous success with LUA in Conky on Arch. And all you need to to is put the text HI after the "TEXT" line. ^^;
    Examples of my LUA usage:
    http://fc02.deviantart.net/fs71/i/2010/ … usLink.png
    http://kittykatt.silverirc.com/screens/conky-HUD.png
    EDIT:  Also, I've had success with getting the KDE version by doing the following...
    kwin --version | awk '/^Qt/ {data="Qt v" $2};/^KDE/ {data=$2 " (" data ")"};END{print data}'
    This is the method I'm currently using in screenFetch. Tested it a couple of times myself, but besides that, I'm not sure if it will work or not.
    Last edited by kittykatt (2010-04-22 17:52:25)

  • I am a new user with i pad, I have an i phone with the app account tracker on it, I cannot get the information off my phone onto my i pad why?

    I am a new user with i pad, I have an i phone with the app account tracker on it, I cannot get the information off my phone onto my i pad why?

    iTunes: About iOS backups - Support - Apple

  • How to get debugging symbols for libGL.so.1 library? (nvidia-utils)

    Hello all
    Will see, I am getting many crashes of applications in KDE. In the majority of these accidents I get a backtrace from KBugbuster (or whatever that application is called) that includes the library libGL.so.1. Here a small example:
    #0 0xb7888424 in __kernel_vsyscall ()
    #1 0xb54d198b in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0
    #2 0xb57740ec in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libc.so.6
    #3 0xb2926af3 in vlc_cond_wait () from /usr/lib/libvlccore.so.4
    #4 0xb28a412e in ?? () from /usr/lib/libvlccore.so.4
    #5 0xafac170c in ?? () from /usr/lib/libGL.so.1
    #6 0x00000000 in ?? ()
    I know libGL.so.1 is a library included into nvidia-utils package becouse:
    $ pacman -Ql | grep /usr/lib/libGL.so.1
    nvidia-utils /usr/lib/libGL.so.1
    I downloaded the PKGBUILD for nvidia-utils through abs and I changed it a bit by adding the !strip flag at the option field:
    options=('!strip')
    But it did not work. Today, still, I don't have debugging symbols for libGL.so.1. I have corroborated this using nm command:
    $ nm -a /usr/lib/libGL.so.1
    nm: /usr/lib/libGL.so.1: no symbols
    Watching the PKGBUILD for nvidia-utils I see this is not a build, apparently it only download the files and put them in the appropriate places. I think this is why the flag !strip does not work in this case.
    So I have looked for information at the official nvidia site for compiling libGL.so.1 by myself but only appears complex information for developers not for a end user like me.
    Can anyone guide me or something with this? please.
    Thanks so much.
    Last edited by zuargo (2011-11-21 03:03:16)

    Hi Alexander,
    As you need read-only access to the SBO database, you could use a straight database connection. You could maybe use the following Microsoft php extension:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=ccdf728b-1ea0-48a8-a84a-5052214caad9&displaylang=en
    The Web Service wrapper for the DI Server is a good solution if you want to be able to write data back to SBO. Please note the DI Server requires additional licensing from SAP.
    You don't mention what database platform is used by your e-shop site. An alternative approach would be to use an integration tool (something like Pentaho) to pull or push data between the e-shop database and the SBO database (again, this is only possible for reading data from SBO not writing).
    Kind Regards,
    Owen

  • Cannot get latest upgrade for i pod touch

    Hi, I am trying to update my I Pod to the latest software but cannot get past 4.2.1 . Some of the apps I want to install say I need 4.3 but it seems it is not available for my I pod.
    Any info would be appreciated.
    Kind Regards.

    You may already have the latest update for your iPod Touch, but check here to be sure:
    iOS 4: Updating your device to iOS 5 or later
    Here are the last OS versions for each iPod generation:
    An original iPod Touch can run iPhone OS 3.1.3
    2G model: maximum iOS 4.2.1
    3G model: maximum iOS 5.1.1
    4G, 5G can run iOS 6. 
    To determine which of these you have click here: Identifying iPod models

  • Downloaded app from Savy Soda cannot get app on to main screen

    Downloaded Documents from Savy Soda And can only open from settings.
    How can I get the App to main screen.??
    Have tried deleting and uninstalling but when reinstalling goes back into settings. HELP

    Savy Soda Documents is available in the US app store.
    Try a reset, hold power and home buttons down for about 15 seconds un til you see the Apple logo appear.
    No data will be lost.

  • Getting version information for Repository Objects

    Is there a way (preferably a BAPI/FM, and if not, then a table) to get version information about a given repository object?

    > SVRS_FIND_VRSD_INFO
    That function module needs version number. It would be useful to me if this was optional. What I needed was the entire history. i.e. All versions.
    The export parameters however, pointed me to the table VRSD, which I think serves my purpose very well (unless there is a standard FM for getting information for all versions).
    Thanks!

  • Getting Demographic Information for Podcaster

    I need to find the demographic information for my podcast. Does anyone know of a way to do this? Thanks

    There's a SDK method because you have to set it before you can get it.
    I'm assuming you haven't set any printer options for those FullClient documents.
    To see if printer setting has been set, check getFullClientPrinterOptions().isEnabled().  If false, then there's no guarantee any of the properties for the IFullClientPrinterOptions have been set.
    It's different for Crystal Reports, since Crystal Reports are strongly tied to the printer against which the report was designed, so it's always there (or set to a virtual "No Printer").  Desktop Intelligence (FullClient) is not.
    Sincerely,
    Ted Ueda

  • I cannot get the updates for ipad to download. when it gets ready to process the file an error message pops up saying the software was unable to download and the network timed out. any suggestions...

    i am trying to update the software on my ipad from 4.2 to 4.3.3 but i cannot get it to download. I get an error message that says the software was unable to download because the network timed out.  I have tried to download it 7 or 8 different times and still get the same message.  I cannot restore the factory settings either.  The same thing happens.  Does anyone have any suggestions?  It did this when trying to update to 4.2.  I don't remember how we were able to get the software to update.  Thanks.

    Thank you King_Penguin!  It worked beautifully.  I had turned the firewalls off but not the antivirus.  You are great!  I am new to this apple community thing so it looks like I cannot mark your reply as "correct answers", but it was.  Thanks a ton!

  • Cannot access payment information for my account

    I Changed my credit card details on my account but purchase have been blocked, cannot access this information to verify it

    What happens when you try to do a purchase, and what information can't you access and verify ?

  • Visual Studio cannot remote debug Azure cloud service: There was a failure to launch the remote debugger

    I am trying to invoke remote debugger on an Azure worker role cloud service, following the example of
    http://msdn.microsoft.com/en-us/library/azure/ff683670.aspx
    But on attaching the remote debugger for the cloud service instance
    Microsoft Visual Studio
    There was a failure to launch the remote debugger.
    OK  
    According to somebody else's extra coverage on the topic, there are extra ports 4016/4017 that need to be taken care of (but do they have to be exposed externally)?
    http://developers.de/blogs/damir_dobric/archive/2014/02/04/behind-windows-azure-remote-debugger.aspx
    So servicedefinition.csdef gets
        <Endpoints>
          <InputEndpoint name="Endpoint1" protocol="http" port="80" />
          <InputEndpoint name="RemoteDebugger" protocol="tcp" port="4016" localPort="4016" />
          <InputEndpoint name="RemoteDebugger2" protocol="tcp" port="4017" localPort="4017" />
          <InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector" protocol="tcp" localPort="30398">
            <AllocatePublicPortFrom>
              <FixedPortRange min="30400" max="30424" />
            </AllocatePublicPortFrom>
          </InstanceInputEndpoint>
          <InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Forwarder" protocol="tcp" localPort="31398">
            <AllocatePublicPortFrom>
              <FixedPortRange min="31400" max="31424" />
            </AllocatePublicPortFrom>
          </InstanceInputEndpoint>
        </Endpoints>
    Serviceconfiguration.cscfg gets
          <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Enabled" value="true" />
          <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Version" value="2.3" />
          <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ClientThumbprint" value="THUMBNAIL" />
          <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ServerThumbprint" value="THUMBNAIL" />
        </ConfigurationSettings>
        <Certificates>
          <Certificate name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.TransportValidation" thumbprint="THUMBNAIL" thumbprintAlgorithm="sha1"
    />
        </Certificates>
    But all these are to no avail; the same error still pops for Visual Studio 2013 Update 4; Azure SDK 2.3
    Anybody regularly perform remote debugging for Azure cloud services?
    The melody of logic will always play out the truth. ~ Narumi Ayumu, Spiral

    And, how do I control that in Visual Studio?
    All I get is the Attach Debugger... context menu option in the Azure cloud service nodes in Server Explorer. That is where it is failing. There are no customisable options.
    Because of that, the Attach to Process dialog box is unable to retrieve the list of processes (to debug) in the remote worker role instance server.
    I tested a blank-template worker role project and published to a new cloud project, and this simplistic copy had no problems with the Remote debugger.
    Now the question is, what is it about this real-world project/cloud service that is different from blank sample? From what I compare between what I think are the relevant settings, there are none.
    ServiceDefinition.csdef
    <Imports>
    <Import moduleName="Diagnostics" />
    <Import moduleName="RemoteAccess" />
    <Import moduleName="RemoteForwarder" />
    <Import moduleName="RemoteDebuggerConnector" />
    </Imports>
    <Contents>
    <Content destination=".\">
    <SourceDirectory path="D:\Projects\experiments\workerrole1\workerrole1\rcf\Debug\RemoteDebuggerContent\" />
    </Content>
    </Contents>
    <Endpoints>
    <InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector" protocol="tcp" localPort="30398">
    <AllocatePublicPortFrom>
    <FixedPortRange min="30400" max="30424" />
    </AllocatePublicPortFrom>
    </InstanceInputEndpoint>
    <InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Forwarder" protocol="tcp" localPort="31398">
    <AllocatePublicPortFrom>
    <FixedPortRange min="31400" max="31424" />
    </AllocatePublicPortFrom>
    </InstanceInputEndpoint>
    </Endpoints>
    ServiceConfiguration.cscfg
    <ConfigurationSettings>
    <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="DefaultEndpointsProtocol=https;AccountName=storage;AccountKey=" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.Enabled" value="true" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountUsername" value="" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountEncryptedPassword" value="" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountExpiration" value="2015-12-31T23:59:59.0000000+08:00" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteForwarder.Enabled" value="true" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Enabled" value="true" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Version" value="2.4" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ClientThumbprint" value="" />
    <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ServerThumbprint" value="" />
    </ConfigurationSettings>
    <Certificates>
    <Certificate name="Microsoft.WindowsAzure.Plugins.RemoteAccess.PasswordEncryption" thumbprint="" thumbprintAlgorithm="sha1" />
    <Certificate name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.TransportValidation" thumbprint="" thumbprintAlgorithm="sha1" />
    </Certificates>
    The melody of logic will always play out the truth. ~ Narumi Ayumu, Spiral

Maybe you are looking for