SU number leading zeros

Hi Gurus
We have multiple plants and warehouses in our system and for our business reuirements HU and SU are both active
One warehouses use SU conversion length as 10 digits ( pallet numbers with 2 leading zeros) and other use 18 digits
I have a requirement to use different length conversion for SU in different warehoses
For enabling 18 digit SU numbers we have maintained SU conversion length as 18 but this is defined at system level
so for 10 digits SU numbers also system is asking to enter full 18 digits , thius is causing problems in RF transactions and manually in LS33 as well
Let me know if you have come across same thing or any other pointer for changing system to make it understand 10 digits as well
Cheers
SAP learner

Hi,
please refer below link..
SU Number Range
Kuber

Similar Messages

BAPI_PO_CHANGE document number leading zero problem

Hi experts,
The following code clears the "Delivery Complete" flag on a list of Purchase Orders uploaded from a CSV file.
The PO number is 9 digits long, however, in EKPO table it is stored as 10 digits (prefixed with a zero). The BAPI does not recognise the document number unless it is prefixed with a zero in the CSV file (which adds extra work for the user to create custom format in Excel to add the leading zero).
What code is required for the BAPI to recognise the 9 digit number without the leading zero?   Perhaps the leading zero could be hard-coded into the program?
Any advice is much appreciated. Thanks for your time.
REPORT Z_MASS_REMOVE_FDI_DCI_BAPI.
*Check if file exists
DATA: rc TYPE sy-ucomm.
CALL FUNCTION 'WS_QUERY'
       EXPORTING
            query    = 'FE' "File Exist?
            filename = 'X:\STO.TXT'
       IMPORTING
           return   = rc.
IF rc EQ 0.
WRITE: / 'File does not exist'.
ENDIF.
TYPES: BEGIN OF ty_tab,
        DOCNO(10),
        ITEM(4),
       END OF ty_tab.
DATA : it_tab TYPE STANDARD TABLE OF ty_tab,
       wa_tab TYPE ty_tab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename = 'X:\STO.TXT'
*     FILETYPE = 'ASC
      has_field_separator = 'X'
*     HEADER_LENGTH = 0
*     READ_BY_LINE = 'X'
*     IMPORTING
*     FILELENGTH =
*     HEADER =
      TABLES
      data_tab = it_tab
      EXCEPTIONS
      file_open_error = 1
      file_read_error = 2
      no_batch = 3
      gui_refuse_filetransfer = 4
      invalid_type = 5
      no_authority = 6
      unknown_error = 7
      bad_data_format = 8
      header_not_allowed = 9
      separator_not_allowed = 10
      header_too_long = 11
      unknown_dp_error = 12
      access_denied = 13
      dp_out_of_memory = 14
      disk_full = 15
      dp_timeout = 16
      OTHERS = 17.
END-OF-SELECTION.
LOOP AT it_tab INTO wa_tab.
WRITE:/ 'DOCUMENT: ',
wa_tab-DOCNO,
' ITEM: ',
wa_tab-ITEM.
WRITE: / '-----------------------------------------------------------------------'.
DATA: s_header TYPE bapimepoheader,
        s_headerx TYPE bapimepoheaderx,
        s_item TYPE bapimepoitem,
        s_itemx TYPE bapimepoitemx,
        i_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE,
        i_extension TYPE bapiparex OCCURS 0 WITH HEADER LINE,
        s_bapimepoheader TYPE bapimepoheader,
        s_bapimepoheaderx TYPE bapimepoheaderx,
        s_bapimepoitem TYPE bapimepoitem occurs 0 with header line,
        s_bapimepoitemX TYPE bapimepoitemX occurs 0 with header line,
        wa_message TYPE c LENGTH 100.
s_bapimepoheaderx-po_number = wa_tab-DOCNO.
s_bapimepoheader-po_number = wa_tab-DOCNO.
s_bapimepoitemx-PO_ITEM = wa_tab-ITEM.
s_bapimepoitem-PO_ITEM = wa_tab-ITEM.
*Remove Delivery Complete Indicator (DCI)
s_bapimepoitemx-NO_MORE_GR = 'X'.
s_bapimepoitem-NO_MORE_GR = ' '.
append s_bapimepoitem.
clear s_bapimepoitem.
append s_bapimepoitemx.
clear s_bapimepoitemx.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      purchaseorder = wa_tab-DOCNO
    TABLES
      return        = i_return
      poitem        = s_bapimepoitem
      poitemx      = s_bapimepoitemx.
*Message types: S Success, E Error, W Warning, I Info, A Abort
*Supress all Warning Messages
DELETE i_return WHERE ( TYPE EQ 'W' ).
*Commit only if no errors have been returned
read table i_return with key type = 'E'.
if sy-subrc ne 0.
    COMMIT WORK AND WAIT.
endif.
*Display Return Messages on Screen
LOOP AT i_return.
    WRITE: /   'RETURN MESSAGE: ',
    'ID: ',
    i_return-id,
    ' TYPE: ',
    i_return-type,
    ' NUMBER: ',
    i_return-number,
    i_return-message.
ENDLOOP.
WRITE: / '-----------------------------------------------------------------------'.
refresh : s_bapimepoitem,s_bapimepoitemx.
ENDLOOP.

hi,
Use the conversion exit to make it as 10 digit char CONVERSION_EXIT_ALPHA_INPUT.

EAN number missing leading zeroes

Hi,
I have configured two types of EAN/UPC numbers, one being 12 characters and one being 14. In our business, we have a situation where a material has a case UPC number 00099999123456 and a package UPC of 099999123456.
When these values are displayed on the material master I will see either
099999123456 or
00099999123456
but not both values with the correct number of leading zeroes.
Is there a way to have the correct value with the right number leading zeros when the EAN number is the same except for the leading zeroes?
The standard conversion routines i've looked at do not take into account there could be a different number of leading zeroes based on the EAN type assigned as the type is not a import parameter for CONVERSION_EXIT_EAN11_OUTPUT.
thanks!

Hi,
As per your query this is related to your configuration setting. Pls consult with SD/FI consultant and also consult with ABAPER. If configuration is ok then may be your have develop a programe and the programe may be wrong.
Anil

@ adding leading zeros to a number

Hi,
How do I go abt adding leading zeros to a 8- digit number?
eg DATA: number(8) Type N.
    number = 16.
How do i go about converting this to '00000016'.
Note that the value in variable number would be read frm a file (Inbound prog).

Hi,
Use the function.
data: tknum type vttk-tknum value '99156'.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
     exporting
          input = tknum
     importing
          output = tknum
Regards

Need formula to take text from one cell, add that to a serial number with leading zeros

I'm trying to create a spreasdheet cell that simplifies creating videotape Numbers from a job name in cell and appends a serial number with leading zeros, and that would survive an export to EXCEL.
The result would look like
A Column
Job Name
B ColumnTape #
Formula needed for B
ClientName-TapeType-
ClientName-TapeType-001
=
ClientName-TapeType-
ClientName-TapeType-002
=
I've tried using a custom cell format that had the text in front of the (Integer) drag and drop, with three integers and leading zeros.
That worked, but requires recreating the custom cell format for each client and tape type.
So, I've used the formula =A2& in order to play around with different things, but haven't hit on something that adjusts for increased numbers and retains the leading zeros.
I don't mind doing a starter for the first row and then adding +1 in the formulas for the rows below.
I've done that using the custom cell formats for the first B cell and then using =Bx+1 in the following cells. It works, but I'm hoping to find something simpler or that can be copied and pasted in multiple rows on one paste.
Thanks in advance.
Suggestions much appreciated!
Ted

Ted,
This expression in B will give you the pattern I believe you are looking for:
=A&RIGHT("00"&ROW()-1, 3)
Here's a screen shot...
Jerry

How can I format a cell in Numbers to have leading zeros in a number?

I imported a spreadsheet from Excel (Office 2014, Win 7) through iCloud and some numbers were formatted to have leading zeros (012358) in the original Excel file but the leading zero format was lost in Numbers. Is there a way to format cells to have a number displayed with the leading zero in Numbers? The leading zero is part of an identification and is important to the numbers (0027 is not the same as 27 in these records).
thanks,
Bob

James has the formating part, but if you already did the import you can use the following formula to replace the zeros that were leading if you know it is a four digit reference number....
=right("000" & A2,4)
copy those values into your text formatted column from James' answer and you got it.
Jason

Appending leading zeros to material number

Hi,
I want to form a object key for material number. so i need to append leading zeros to material number. but i am getting "TYPE CONFLICT" shot dump in FM 'BAPI_OBJCL_GETDETAIL'.
The following code is giving the dump.
data: wa_object(18) type c.
wa_object = '100301010'. "Material No
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = wa_object
    IMPORTING
   OUTPUT        = wa_object.
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
    OBJECTKEY              = wa_object
    OBJECTTABLE            = 'MARA'
    CLASSNUM               = 'FINISHED_MATERIAL'
    CLASSTYPE              = '001'
    KEYDATE                = SY-DATUM
    UNVALUATED_CHARS       = ' '
    LANGUAGE               = SY-LANGU
TABLES
    ALLOCVALUESNUM         = IT_ALLOCVALUESNUM
    ALLOCVALUESCHAR        = IT_ALLOCVALUESCHAR
    ALLOCVALUESCURR        = IT_ALLOCVALUESCURR
    RETURN                 = IT_RETURN
but if I hard code to 18 characters, the following code is working fine:
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
    OBJECTKEY              = '0000000000100301010'
    OBJECTTABLE            = 'MARA'
    CLASSNUM               = 'FINISHED_MATERIAL'
    CLASSTYPE              = '001'
    KEYDATE                = SY-DATUM
    UNVALUATED_CHARS       = ' '
    LANGUAGE               = SY-LANGU
TABLES
    ALLOCVALUESNUM         = IT_ALLOCVALUESNUM
    ALLOCVALUESCHAR        = IT_ALLOCVALUESCHAR
    ALLOCVALUESCURR        = IT_ALLOCVALUESCURR
    RETURN                 = IT_RETURN
Please tell me how to rectify the short dump which uses Conversion_exit_alpha_input.
Thanks .
Sankar

Hi Shankar,
When ever u pass parameters to any function module the type of parameters must match with the ones defined in function module. Here u defined ur object key like this
data: wa_object(18) type c.(18 digits). But the in function module it referenced with BAPI1003_KEY-OBJECT (50 digits). So u have to define the variable with BAPI1003_KEY-OBJECT.
Check this solution. It will work for u.
data: wa_object(18) type c,
           wa_object1 TYPE BAPI1003_KEY-OBJECT.
wa_object = '100301010'. "Material No
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = wa_object
IMPORTING
OUTPUT = wa_object.
wa_object1 = wa_object.
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
OBJECTKEY = wa_object1
OBJECTTABLE = 'MARA'
CLASSNUM = 'FINISHED_MATERIAL'
CLASSTYPE = '001'
KEYDATE = SY-DATUM
UNVALUATED_CHARS = ' '
LANGUAGE = SY-LANGU
TABLES
ALLOCVALUESNUM = IT_ALLOCVALUESNUM
ALLOCVALUESCHAR = IT_ALLOCVALUESCHAR
ALLOCVALUESCURR = IT_ALLOCVALUESCURR
RETURN = IT_RETURN
Thanks,
Vinod.

Leading Zeros in SU Number

We are using SU Managment
How do we get rid of leading zeros in SU# number range. System is storing pallet ID # with leading zeros in the LEIN table. This is causing issues while we retrive SU data from the tables, systems ask to enter the SU# number with leading zeros.
My Pallet Tag is printed with out leading zeros SU # 1234567890 and when the user tries to put away using LM02 system does not read the pallet ID. It looking for 00000000001234567890.
Even on desktop LS33 if I try to display a pallet with SU # 1234567890 system looks for SU Num. with leading zeros. Is there a way to get the leading zeros off from SU#
Appriciate your help

Please check in SPRO whether the conversion exit is maintained for Storage Unit Management. Follow the below path to do so.
SPRO -> Storage Unit Management - > Master Data - > Define Number Ranges. In the Pop Up choose "Conversion exit for storage unit number" .
Here you can define the "length of SU Numbers "
Regards,
Kumaran

Leading zeros in credit card number

I'm trying to allow leading zeros in a credit card field.
I have 4 fields, one for each set of numbers.
I'm currently using number format for each field.
When the user types a leading zero in their credit card number, acrobat gets all excited and assumes that the leading zero(s) should not be there, then removes it / them.
Is there any way I can allow leading zeros?
Thank You.

Thank You! I ended up following your instructions and using this:
var fmt = /^\d\d\d\d$/;
if(event.value != "")
    if(!fmt.test(event.value))
        app.alert("Incorrect format, must be four numbers");
        event.rc = false;

Leading zeroes on eight digit PO number

We had a requirement to use an eight digit number for PO number instead of the standard 10 digits that SAP uses. To accomplish this we created our number ranges with two leading zeroes (for example range 0060000000 to 0069999999). Now on the GR screen when someone creates a GR based on a PO it is requiring that they enter the leading zeroes. Is there any way to avoid this or is it always going to be required since that's the way the number range is assigned?
Thanks!

This can be ignored.

Document Templates in MS Word - how to cut the leading zeroes in number

Hello CRM gurus !
We use document templates in MS Word but have the document number printed with the leading zeroes.
example we have now:
0005000681
example we want to have:
5000681
Question - how to do that?
Is that in standard? The document number is the ObjectID tag as far as I know. Do I need to create another tag?
Or may be just call a function? Do I need to change my current Web Service Tool? Is that some extra ABAP to be inserted?
Thank you very much.

Hi,
have you tried to use this function call to delete de leading zeros?:
     CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
         input = value
       IMPORTING
         output = value.
Best regards
Manfred

How to remove leading zero from Material Number

Hello Everyone,
I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
Is there any setting in query desinger to handle this issure or in the backend.
Need your inputs.
Thanks,
Lasya.

Hi
you can use the function Module
CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
to test this go to SE37 --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
>display -
> F8
in the input give 000000456
and execute
the out put will be 456
for getting Zeros you can use
CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
Santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM

How to remove leading zeros for an item number within quickviewer

how to remove leading zeros for an item number within quickviewer. Pls help

ask your abap guy to do it. not portal guys business.

Need to show leading zeros in the number field when printed from RDF

We have a requirement to show leading zeros in the rdf output.
We cannot use a format mask to achieve the same as the length of the field is not fixed.
for ex if we have 0.68 then the same is printed in RDF as .68
we cannot use a format mask as the length of the field is not fixed.
we need to
Kindly suggest if any solution exists for the same.

the numbers after the decima can be anything..
it can range between 2 to 10 or more...
as told by you if we put the format as to_char(.68,'90.99') it shall give 0.68 but what for numbers like0.678,0.4567,0.765433 it will display only 2 digits after the decimal...
The requirement is to dispaly the number as it is ,only the zeroes before the decimal should stay intact..
we are not able to achieve this in rdf output..
if it is
0.678 then 0.678 shld be dispalyed
0.4567 then 0.4567
0.765433 then 0.765433
one format mask shld wrk for all the above..
we would not be changing the format mask for each number....

BAPI to remove leading zeros from the serial number

Hi All ,
plz can anybody suggest me the alternative BAPI for 'BAPI_SERVNOT_MODIFY_DATA ',whose function is to delete the leading zeros,from the serial number.
Thanks.

Perhaps instead of using a BAPI you can code it like this.
DATA:serial(10) TYPE n VALUE '0000340078',
pos TYPE i VALUE 1.
START-OF-SELECTION.
WHILE pos <= 10 AND serial+pos(1) = 0.
pos = pos + 1.
ENDWHILE.
REPLACE ALL OCCURRENCES OF '0' IN serial(pos) WITH space.
WRITE serial.

SU number leading zeros

Similar Messages

Maybe you are looking for