Sub contracting GR cancellation

Dear All,
I have done GR for sub contracting PO, when I am doing return delivery for that material document system is throwing the error as
Deficit of Stock w. vendor unr. 500 EA : RO00106781 BP01 O
Message no. M7021
Kindly Guide me how to proceed?
Rgds
Srini

hi
Please check note 1159627
to sove the error
regards,
Ramana

Similar Messages

Cancellation of 122 for Sub contracting PO

Dear Sir/mam
Child item send to vendor through 541and when Parent material is received we do migo 101 for Parent Material and stock is posted to quality,if accpeted it is in unrestricted but if rejected we post to return delivery and mvt type 122.Can i cancel the this document can i get some filed of identification that its it sub contracting PO.Problem is we have received the parent but we have send the child so if i had done 122 so child item po is open and i want to send the parent back through 57A4.So please throw some light how to track and resolve .
regards
kunal

dear
Kunal
Lets' Understance the situation.
You have send some material to vendor by 541(Child)
Now when material is returned
Assembly Number-Parent is 101
But all sub-assemblied-child items are with 543 mvt tye.
When you do return delivery to vendor
that is 122 mvt type Parent item has 122 mvt but child items has 544 mvt type(Reversak of 543)
So you can camcel the document MBST or send back material by 122 mvt (pareent +chield-544) by MBRL
In Document geenrated it will show 122 of Parent & 544 of Chield items.
I hope you are clear.
Regards
Sujit

Goods receipt through Inbound delivery for Sub-Contracting Purchase order

Hi
I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
Thanks in advance for your immediate response.
with regards,
Joseph Anand B

Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
You can fix this by maintaining correct batch in the PO component list.
But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the recevied stock shouldn't have been processed to do reversal of inbound delivery.

Sub Contracting Order & Vendor Return

Hi,
We use to send Materials to our Sub Contracting Vendor (MB1B - Mov. Type 541).
Now in one of the cases, we had to cancel all the Orders given to the Vendor, and we want the Materials back from the Vendor.
The Materials need to move to Quality also, as per our requirement from the Quality Department.
Should we take back the Materials with Mov. Type 542 or is there any other Movement Type for the same.
What all changed needs to be done in MM& QM.
Also requested to send me the List of Movement Types.
Thanks & Regards,
P K Karn

Hello Srinivas
I have the same requirement, I was going through the process you mention but I was unable to find the Inspection lot origin 08
(stock transfer) in OMJJ transaction.
Please Can you eloborate on this.
Thanks in Advance
With regards
Srikanth
Edited by: Srikanth Pusian on Aug 27, 2008 8:15 PM

Sub Contracting GR Accounting Entries

Hi All,
I am posting GR for sub contracting PO and found the following entries in the accounting document of GR:
1. Stock Acct. of Finished product
2. GR/ IR Clearing Acct
3. Sub Contracting Charges
4. Change in Sub Contracting Stock
However, I did not see the accounting entries for:
1. Stock Acct. of Spare parts
2. Consumption Acct
Please suggest how to corrent the same?
Rgds,
KK

Hi,
Check in GR Document whether line item for component consumption exists with MvT 543, if yes then check whether MAP of material is ZERO.
If line with MvT 543 doesn't exist then you might have forgot to activate "Item OK" indicator for component line item during GR in MIGO. Confirm this by checking componet stock in MMBE for special Stock "O" for Vendor. Just cancel the GR Document and Post GR again.
During GR against Subcontracting PO (In MIGO), following A/c Entry should get posted;
BSX     Assembly Stock A/c          Dr     5000.00
BSV     Change in Stock A/c          Cr     5000.00
FRL     Subcontracting Charges A/c     Dr     1000.00
WRX     GR/IR Clearing A/c          Cr     1000.00
GBB-VBO     Component Consumption A/c     Dr     4000.00
BSX     Component Stock A/c          Cr     4000.00

Sub contract in sales

I need sub contract in sales.
Ex:
Customer sent material to plant they need some process in our plant for that I need scenario and configuration.
How we allow customer material into plant?
After finished work how to deliver products to customer and billing also.
Please help me any one

Hi Dharmananda rao
Sub Contracting Cycle :
(1) You have a material that can be procured externally, and you have maintained BOM with components. Any waste generated and received during subcontracting process can be maintained as component with negative quantity.
(2) You create a subcontracting PO (PO with Item Category L). You can also maintain Purchase Info Record for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components for SC PO. Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor"
(4) You receive finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
DR FG Stock/ SC By-Product Stock
CR Change in Stock (FG/ SC By-Product )
(for finished goods received)
DR Subcontracting Charges
CR GR/IR Clg
(for moneys payable to Subcontractor)
DR Consumption (Components)
CR Change in Stock (FG/ SC By-Product )
(material provided to Vendor is now charged to expense)
5) You do the IV for SC Invoice, and the process is complete.
Process of Subcontract in MM :
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Can anybody tell me how a process has to be given to subcontracting?
Suppose, I have 3 operations 1)weaving 2)dyeing 3)cutting & packing
if no 2 process (i.e Dyeing) has to be given to subcontracting, what process should i follow ?
The following process to be followed for subcontracting.
1. Item code(material master) to be created at the stage of before dyeing.
2. Item code(material master) to be created after Dyeing as subcontracted item.(F30)
3. Bill of material to becreated for the material(2) calling for material(1)
4. Inforecord and source list to be created for material(2) with the corresponding vendor
5. PO to be released for material (2)
6.Along with PO the material(1) to be issued to vendor
7.On receipt of material when GR is made the stock with vendor will get updated.
How to Create a Subcontract Order?
To create a subcontract order, proceed as follows:
Enter the material you want to order and the item category for subcontracting (L) in the order item.
Press ENTER to display the screen for component processing.
Enter the components that the vendor requires to manufacture the product.
Please note:
You do not need to enter the date required for the components. This date is proposed by the system when you press ENTER.
It is calculated as follows:
Delivery date of the item - Planned delivery time
If you do not want the quantity of the components to be changed if the order quantity of the end product is altered, set the indicator Fixed quantity (column F).
You can determine whether the components are available on the date required by selecting Edit -> Availability check.
If you entered a bill of material as the material in the subcontract order, the components are created automatically.
If you want to determine the components in the bill of material at a later date (for example, if the bill of material is subsequently changed), choose Item -> Component -> New BOM explosion. The existing components are deleted and redetermined in the bill of material.
Save the purchase order.
When you print the purchase order, the components are printed per order item
Subcontracting - Key Points
Special Procurement Process.
Item category: L
Order type: NB
In info record vendor should be maintained as subcontractor.
Vendor (Subcontractor) receives the components used to manufacture a finished product directly from your company or through third party.
Your company should place a purchase order for the finished product. In this manually you can enter the required individual components or it can be determined via the explosion of BOM (if exists).
Stock check at vendor level: ME2O
Company stock check: MMBE
GR for individual components through movement type: 501 or 561 (if with out PO or without reference).
GI to subcontracting vendor: through movement type 541.
GR from sub contracting vendor: through movement type: 101
Movement type 543 is displayed to cancel the material cost account.
If the subcontracting order has to be generated through materials planning,the special procurement key has to be set in MRP 2 screen.
- To create the Subcon Info Record : Tcode ME11 - Info Category - Click Subcontracting
- To create Material BOM : Tcode CS01
- With the Info and Material Setup, you can then create the Purchase Order in Tcode ME21N
Reward if useful to u

Can u explain full T-code and Sub contracting steps from 541,544,545,554

hi experts
can u please explain all the steps involved in sub-contracting
process with
ME2O and scrap material
cancellations of sub-contracting
thanks
ganesh

Hi,
Refer link;
[Subcontracting Process w/o Payment of Excise Duty|http://help.sap.com/bestpractices/BBLibrary/Documentation/J85_BPP_V2_EN_IN.doc]
Subcontracting Process
Subcontracting without Payment of Duty
- Creation of Subcontracting PO (ME21N)
- Transfer Posting of Components to Subcontractor (Mvmt Type - 541) (MB1B/ME2O/MIGO)
- Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01)
- Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and autoconsumption of components with 543 movement}
- Reconciliation of Subcontracting Challan (J1IFQ)
- Completion of Subcontracting Challan (J1IF13)
- Generation of Annexure IV (J1IFR)
Master Data
- MM01- Material Masters for Components and FG
- XK01 - Vendor Master (Subcontractor)
- CS01 - BOM for FG
- ME11 - Purchase Inforecord for Subcontracting
Configuration: -
- Go to SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction > Here maintain as following;
ETT Subtrn Typ DC ind Acct name
57FC            CR     PLABED
57FC            CR     RG23BED
57FC            CR     RG23ECS
57FC            DR     CLEAR
57FC 01         CR     PLABED
57FC 01         CR     RG23AT1
57FC 01         CR     RG23BED
57FC 01         CR     RG23ECS
57FC 01         DR     CLEAR
57NR            CR     CLEAR
57NR            CR     PLABED
57NR            CR     RG23BED
57NR            CR     RG23ECS
57NR            DR     REVERS
57NR 01         CR     CLEAR
57NR 01         CR     PLABED
57NR 01         CR     RG23BED
57NR 01         CR     RG23ECS
57NR 01         DR     REVERS
- And then go to SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction > Here do Account Determination for the above combination and Excise Group
Apart from above also do following configuration for Subcontracting;
- SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes
Here maintain following;
Excise Group         XX
Excise TT            57FC
Subtransaction Type 01
Subtran Type Text   57FC CHALLAN
Subc. Period        180
Rate-subcontracting
Mvt Grp Issues      0001
Mvt Grp Receipt     0002
Filter Non exise
EI Items            10
No. range no.       01
***. Val. /Exc Inv
Subcon Output Type J1IF
- SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups
Here maintain following
MVT. Grp. MvT S
0001      101 O
0001      541 O
0002      542
0002      542 O
0002      543 O
- J1I9 - maintain No range for object "J_1I57FC" for series group

Creation of Sub Contracting PO through Maintenance Order

Dear All,
I am aware of the sub contracting indicator to be cliked in the maintenance order in order for the system to generate a Sub Contracting PO through Maintenance Order. However I am unable to see this indicator in maintenance order fields.
Is there anything that I am missing in customising settings or is this related to activation of any business function sets.
I am working in ECC 6.0 EhP 5.0.
Need your help / inputs so as to resolve my issue.
Thanks in advance.
JK

Hi Tehsin,
Thanks for ur response.
However this is something I am aware of. The settings suggested by you will automatically generate a PR with Account Assignemnt Category as 'Order' (F) & Item Category as 'Service' (D) combination.
I am looking for the auto generation of PR through the maintenance order with Account Assignemnt Category as 'Order' (F) & Item Category as 'Sub Contracting' (L) combination.
Looking forward to hear from all.
Thanks in advance
JK.

Report For Sub Contract Material

Dear Experts,
Is there any standard report for finding the details of the subcontract.
I tried through ME2O, MBLB where I am not getting the report I wanted.
I want to take a montly report for all the subcontract work given to the vendor. (The work is completed )
Please help. Thanks

Thanks,
In ME2L I am able to get the details, but the problem is;
I want to get a report which will give me the full details of the Sub COntract PO.
Example. I created a Sub COntract PO for Fineshed Material A. For makng Material A I need to supply Material B, Material C to the Sub Contract Vendor.
I want to know by the end of the month
1) The Subcontract PO
2) Final Material (Material A)
3) Raw materials Supplied to vendor (Material B & Material C)
4) Status of the order
5) Material A given back to me
6) remaining Material (Material A)
Please help.

Sub contract

my client running fg sub contracting (electro plating )cycle through the MRP
after return from vendor with mvt type 105 (543) i check document list with MB51. i found following g/l account effects :
SFG consumption for sub contract account = 602026
Gr/IR Clearing Account = 164335
SFG-inventory account = 323055
for sub contract account = 602130
Inventory account = 320010
Costs of goods mfg = 602200
but if do whole sub contracting cycle without MRP i can see effect in following G/L a/C:
Manual Cycle .
Inventory account = 320010
Gr/IR Clearing Account = 164335
Price Differance Account = 602155
change in stock = 603010
Sub Contract expense = 603000
SFG-inventory account = 323055
SFG consumption for sub contract account = 602026
my question is why this differance comes ?
if i want gl accounts hit by manual process in MRP process what changes to be made ?

Hi,
Price diffrences arise during valuation @ GR if the material is managed at standard price in MMR.
Also there is one more setting in customizing that for a plant that price differences should or not be posted during GR.
spro-IMGMMInv MGmtGR--price differences for subcontracting at GR
Regards,
Deepak.

Sub Contracting Process

my client running fg sub contracting (electro plating )cycle through the MRP
after return from vendor with mvt type 105 (543) i check document list with MB51. i found following g/l account effects :
SFG consumption for sub contract account = 602026
Gr/IR Clearing Account = 164335
SFG-inventory account = 323055
for sub contract account = 602130
Inventory account = 320010
Costs of goods mfg = 602200
but if do whole sub contracting cycle without MRP i can see effect in following G/L a/C:
Manual Cycle .
Inventory account = 320010
Gr/IR Clearing Account = 164335
Price Differance Account = 602155
change in stock = 603010
Sub Contract expense = 603000
SFG-inventory account = 323055
SFG consumption for sub contract account = 602026
my question is why this differance comes ?
if i want gl accounts hit by manual process in MRP process what changes to be made ?

Hi
Kindly check with the following:
In customizing for that plant price differences should or not be posted during GR.
SPRO->IMG>MM>Inv MGmt>GR-->price differences for subcontracting at GR
Thanks

Error while doing MIGO for a sub-contracted item

Hello to Everybody,
I am facing below problem -
Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
<Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
May I request for possible solution to above error ?
regards,

Dear Sanjay,
You can determine the cost object for the posting of the costs in the transaction OKB9.
Following thread should resolve this issue:
Re: cost of subcontracting
Regards,
Naveen.

Pricing Error in Sub Contracting Material

Dear Experts,
We are executing monthly costing run on plant level. There are some sub contracting materials system issues a message that '' No Price found'' while there is standard price maintained in materials master. what could be possible reason...Please suggest.....
Regards,
waqas

Dear Umar,
Thanks for your support,
I went through this post before posting my question. I know SCN Rules not new to SCN . The solutions suggested in the post are not feasible for my problem. I already tested this. All Master Data exists in my case on CO PP and MM side.
Please suggest the solution if u know!
Thanks...........

Quantity reconcilation of sub-contracting challan error

Hi Experts,
I am facing problem while doing Quantity reconcilation of sub-contracting challan.
Challan material is different from material document
Message no. 8I572
Thanks in advance

hi..
please go to spro>log general>tax on goods movement>india>business transaction>subcontracting>maintain movment type group
and maintain as given
0001 102
0001 122
0001 541
0001 544 O
0002 542
0002 543 O
and
Also This can be solved as under. ( check for following also)
You will have to activate PO number as a required field for 541 mvmt.
Materials Management -> Inventory Management and Physical Inventory ->
Goods Issue / Transfer Postings -> Define Screen Layout.
For movement type 541 the purchase order field has to be maintained as
an optional entry or as a required entry here. (under normal condition it will be suppressed)
This has not been done, otherwise the error message would appear as the mseg-ebeln would not hold the PO number.
After doing this carryout a new cycle. you will not get any error.
Edited by: Kedar Kulkarni on Nov 12, 2009 6:06 PM

Run time error while reconcillation for sub contracting challan

Hi,
Gurus please solve this issue ,
When i am trying to reconcillation for sub contracting challan against the GR DOC number.When we are assing the quantity for challan and save at that time i am getting abap dump

Analyse in ST22
U may take abaper help

Sub contracting GR cancellation

Similar Messages

Maybe you are looking for