Submit data without required fields

Hi,
We have a requirement to save data to DB without giving some of the required fields on UI. The requirement to to Save the data as draft if required at any point of time. I know this might not be a good design, but just want to know if there is any way to do that. Applying immediate is skipping update model phase so i am unable to get the data entered on the UI. Please suggest if its possible.
Using JDev 11.1.1.6.
Thanks

Hi,
if they need to be saved for approval, why don't you then copy them into an approval table that doesn't require validation. Once the data is approved, you copy it back into the original table requiring validation. To do this you could try and override the entity doDML method and use a flag indicating a non-yet-approved change. The problem will be with client side validation that only is skipped if the submit happens immediate, which means you bypass the UpdateModel phase and thus will have to change the data manually from a managed bean. When displaying data you will need to make sure that the most current data is displayed, which may mean that the draft table rules the persistent table. You can also save it directly in the original table, but this means that the table is without constraints, which means its badly designed.
Frank

Similar Messages

How to make Department field in cost centre master data a required field?

Dear Experts,
I want to make the Department field in the cost center master data as required field.....how do i do it?
regards
Suresh

Hi Sursh
Create a transaction varinat through SHD0.
For the department field, activate the Requred check box field.
Then activate the variant.
Regards
SAP Student

Display form data without blank fields. (Coldfusion)

I would like to display data that was enter into a form, but
without the fields that were left blank. For example, if someone
enters their info in address 1 but left address 2 blank, I want to
display address 1 and then display the next completed form field if
address 2 was left blank. I am writing this in Coldfusion.
What I am trying to do is allow clients to create and preview
a preformatted business card online so we eliminate the back and
forth proofing process. The design for each card is the same, but
with variable information. Ex., Address 1, Address 2, Cell Phone 1,
Cell Phone 2, etc. When fields are left blank I want to eliminate
them from being displayed as blank spaces.
Thank you in advance.
Steve Miller

You might also want to TRIM(Form.Fieldname) first to make
sure no spaces
were entered on the form.
<CFIF TRIM(Form.Fieldname) neq "">
#Form.Fieldname#
</cfif>
Doug
"Paul Whitham AdobeCommunityExpert"
<[email protected]> wrote in message
news:el2dks$jo2$[email protected]..
> Just wrap your preview in IF statements like this
>
> <CFIF Form.Fieldname neq "">
> #Form.Fieldname#
> </cfif>
>
> --
> Paul Whitham
> Certified Dreamweaver MX2004 Professional
> Adobe Community Expert - Dreamweaver
>
> Valleybiz Internet Design
> www.valleybiz.net
>
> "mcmcreate" <[email protected]> wrote
in message
> news:el18d4$4bl$[email protected]..
>>I would like to display data that was enter into a
form, but without the
>>fields
>> that were left blank. For example, if someone enters
their info in
>> address 1
>> but left address 2 blank, I want to display address
1 and then display
>> the next
>> completed form field if address 2 was left blank. I
am writing this in
>> Coldfusion.
>>
>> What I am trying to do is allow clients to create
and preview a
>> preformatted
>> business card online so we eliminate the back and
forth proofing process.
>> The
>> design for each card is the same, but with variable
information. Ex.,
>> Address
>> 1, Address 2, Cell Phone 1, Cell Phone 2, etc. When
fields are left blank
>> I
>> want to eliminate them from being displayed as blank
spaces.
>>
>> Thank you in advance.
>>
>> Steve Miller
>>
>
>

How to make the Deprtmnt field in the cost center master data as required ?

Dear Experts,
I want to make the Department field in the cost center master data as required field.....how do i do it?
regards
Suresh

Hi Eli,
Thanks for the quick reply
while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in create mode itself.
thanks
regards
Suresh

* is missing for required field in error message

Hi all,
I am using JDeveloper 11.1.1.2 with ADF BC. I have a simple form in a jspx with some fields for user to input.
The page contains 3 mandatory fields (simply set required=true): Surname, Name and Title. Where Surename and Name are inputText, and Title is a Select One Choice with List Of Value defined in VO.
If user submit data without anything in the required fields, an error message will popup. But the content of the error message is not quite correct!
All the required inputText has a prefix: *, but Select One Choice do not have a leading *.
Error
Messages for this page are listed below.
* Surname You must enter a value!
* Name You must enter a value!
Title You must enter a value! is there anyway to add a * to the error message for Select One Choice? or remove all the *? It looks very confusing.
Thanks in advanced,
Samson Fu

not sure,
but try to set the ShowRequired for this LOV in property inspector to true

Post invoice F-43 use alternative payee, found error require field Tax Jur.

Hello everyone
i have some problem
when i want to post invoice F-43,
and document need alternative payee.
in page input alternative payee data , system require field Tax Jurisdiction. that i donot need it.
you can see picture at link below.
http://picturepush.com/public/3913234
http://picturepush.com/public/3913243
how can i remove required field Tax jurisdiction for alternative payee data ?
I try to go to IMG -> preparation for creating vendor master data-> Define account groups with screen layout (Vendors)
and choose group 0003 (ALternative payee) but i donot found field Tax Jurisdiction for configure it.
what shoud i do?
please help.

Hi,
After entering the path : IMG-Financial Accounting-Accounts Receivable and Accounts Payable-Vendor Accounts-Master data-Preparations for creating vendor master data-Define Account Groups with screen layout(Vendors)
select the 0003 for Alternative payee
Duble click on it
D'click on General data and D'click on Control
You will find the Tax jurisdiction code there you can make changes
thanks and regards
ramanuja

User required fields without a submit button

Hi,
I was recently using Adobe Designer 7 and when I would make the field type User Enter - Required, it would not allow the user to go on to the next field.
I have just updated to Designer 8 and it does not allow the same function. When I assign the type to User Enter - Required and fill in the Empty Message box, nothing happens at run time. Is this because I don't have a submit button on the form?
The user will fill in the form and save it under a new name and submit it through our internal email delivery system, so I can't have a submit by email button. Is there any way around this? I'm not very familiar with Java Scripting, but I will do anything, as I need these fields to be filled in.
Any help will be greatly appreciated!!

You'll have better luck posting this in the LiveCycle Designer forum. Output Designer is a totally different product.
That said, I'm surprised that LC Designer 7 prevented the user from exiting a mandatory field. That's user abuse in my opinion. If there's no submit button, the mandatory checking can be done in a script with subFormName.execValidate() where "subFormName" is the subform that contains the objects that you want to validate. The function will return false if there are empty required fields.
Hope this helps.

Re:How can we save the data without enter the mandatory fields

Hi all,
I am using Jdev11.1.2.3.0
Suppose you have a form that consists of inputTexts and some of them are required (required = true). These come from a data control
What my customer wants is two buttons: one submit button, and one save button.
The submit button behaves normally: when a required field is not entered, a validation error is shown.
The save button on the other hand, will perform a model update without complaining, even though some required fields could be empty. This would be the Save operation . the values that the user entered are saved in draf mode., but the process does not continue. It's like saving a draft version of the fields you entered, so you can continue filling in the form for example the next day.
How can i start this scenario.
How can I achieve this? can anyone help me out please.
Thanks,
G.Shilpa

Duplicate of https://forums.oracle.com/thread/2596520
Please don't post question multiple times!
Timo

How do I use 'submit' as complete pdf, and use 'drawn my signature' with required fields?

I have created a form with required fields, no problem. The form can be completed with adobe reader, and a signature added using Sign > Place signature > Draw my signature, great. But i need the required fields to be checked and then sent by email, so I have add a button and set the action to "Submit a form" and selected "PDF The Complete Document" from the options. I then add the javascript URL - mailto:????@????.com, but now the "Draw my signature" option is greyed out.
I have asked this question a number of times, and cannot get a proper answer, please can someone help or offer a work around.

George,
Thanks for your response, but I am not sure it fully answers my question. I have attached a screenshot to show what I mean - here I have created a simple form, with one required field for some data, using Acrobat XI. If I open the form (I have not reader enabled the form) in Adobe Reader XI, I am able to add a drawn signature, I could save the document then attach to an email to send as you have suggested.
But, If I now add a Submit button, set the URL to mail it to [email protected] and select "PDF the complete document" as below
When I open the document in Adobe Reader now, the signature options are all greyed out as you can see.
Hope this clarifies my predicament

Dynamic Submit Button- Required Fields

I needed a dynamic submit button that would cc a field from the form. I found the following script and it works great, but it doesn't give an error message if someone didn't fill in a required field like a regular submit button would. Is it possible to use the script below but to check for required fields?
// This is the form return e-mail. Its hardcoded
// so that the form is always returned to the same address
// Change address on your form
var cToAddr = "[email protected]";
// First, get the client CC e-mail address
var cCCAddr = RegionalDirector;
// Set the subject and body text for the e-mail message
var cSubLine = "909 Camp Visitation Report-" + xfa.resolveNode("#subform[0].#subform[7].Country"); var cBody = "Thank you for submitting your 909 report.\n" + "Save a copy for your records";
// Send the form data as an FDF attachment on an e-mail
event.target.mailDoc({
          bUI: true,
          cTo: cToAddr,
          cCc: cCCAddr,
          cSubject: cSubLine,
          cMsg: cBody

Hi,
stefan's example uses a method that seems a bit clumsy or maybe that was the only way it could be done in 2006. Assuming your email button is called EmailSubmitButton yo can use;
EmailSubmitButton.event__click.submit.target = emailtarget;
where emailtarget is a string in this format
mailto:emailaddress?cc=emailaddress?bcc=emailaddress?subjext=text?body=text
The bold parts you can't change but you can leave out, except for the mailto and the to email address that follows it.
Regards
Bruce

Field Abstract Date is required then Browser alert message coming

Hi All,
When ever we have a Abstract Date field as a mandatory and when you click Save or Check in from the ribbon its throwing the alert message "Are you sure you want to leave this page". See the detailed message on the screen shot attached.
If we remove the required field for the Abstract Date we are not getting any message like below. This is happening on the OOB page as well. To replicate this issue just make that field as a Required and try to save or check in the particular page.
Any help would be appreciated.
Rajasekar A.C

Hi,
According to your post, my understanding is that you wanted to remove the alert message.
Most probably you see javascript confirmation dialog when trying to leave page edit mode without saving.
This is standard IE Javascript confirmation dialog which prevents user to leave the page.
This functionality is not SharePoint-specific, it is standard IE behavior.
For more information, you can refer to:
Publishing pages auto save mechanism in Sharepoint when user leaves edit mode
Warn users before leaving a page with unsaved changes
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Submit clearing required field

I have two buttons on my pdf file. One that submits the form by proxy and another that prints the form (print form checks that the raw value of the fields is not null). I extended the form for reader.
In reader, when I either save the form or submit the form by email and reopen try to click print form it says that the required fields are not filled?
Also, empty fields are replaced by default values?
How can I fix this is there a recalculate or reset I need to do on document open?

I have another question about the bindings. At the bottom of the form, I
have an order table that I am adding instances to.
I would like that to be bound to the xml schema as well. However, if I bind
that data it does not save new instances in the xml. Initially, I load the
pdf with a xml file to fill the ordering options. If I put multiple rows
in the xml it will adjust those if I change the data, but won't insert new
rows into the dataset. So, when I close and reopen the pdf the rows
disappear.

Field Bline date is a required field for G/L account 1200 122400

While posting a Good receipt document using MIGO for a PO I am recieving the following error
Field Bline date is a required field for G/L account 1200 122400
Though both the document date and Posting date fields are filled with appropriate date.
The detailed message reads as follows, now my question is how to change the baseline date for the Cocd 1200 for GL account 122400
Field Bline date is a required field for G/L account 1200 122400
Message no. F5 808
Diagnosis
The value for field "Bline date" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "122400" in company code "1200" linked to the field selection for posting key "81".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bline date". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Hello Ravinagh,
Heres what I did:
OB41> Double clicked on posting key 81> clicked on field status> Payment transactions> Both Due date and Value date have already been set to optional.
For OB14 it asks me to input a field status variant.
There are three of them. Now here is the tricky part, how do I find out which field variant has been assigned
0001     Field status for 0001
1000     Field status for CoA 1000
3000     Field status for CoC 3000
I went further and check for all the three variants one by one
and found out that in the field status> Payment transactions for the following entry in the field status group
G045     Goods/invoice received clearing accounts
The DUE DATE and VALUE DATE are suppressed. What do I need to do here?
Next I checked OBB8 to find the following three Options I dunno which one of them is applicable to the GL account 122400 for Cocd 1200. Where can I find the assignment? How can I find which payment term is being used.
   PayT        Sales text
Day limit   Explanations
0001
0           Payable immediately Due net
0002
0           Within 14 days 3 % cash discount
              Within 30 days 2 % cash discount
              Within 45 days Due net
0003
15          Within 14 days 2 % cash discount
              Within 30 days 1.5 % cash discount
              Within 45 days Due net
              Baseline date on 30 of the month
Entry 1 of 40
Well I went ahead and clicked on each of them
For 0001 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
For 0002 the Default for Baseline date is set to Document date (Do I need to change anything here?)
For 0003 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
Please guide me here. If you need screenshots I would be glad to mail it to you.
I hope you understood the scenario.
Thanks
Ron

Change the Data Type of a Standard Required Field

Hello Experts,
Need to know if is it possible to change the data type of a standard field. The field is marked as a required field.
For example: If a standard field is an Object Picker and I would like to change it to a string field. Is it possible? How can I do it?!
Many thanks,
Igor Nakamura

Hi Igor,
Since you cannot hide a required field, what you can do is move the standard required field to someplace less noticable (like the bottom of the page) and then use a validation script to set it to some benign value.
-Howie

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. this occurrs in the internet explorer and chrome browser, but in foxfire.

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

Submit data without required fields

Similar Messages

Maybe you are looking for