Subscription issue: Paid, but not delivered

Bought subscriptions, but they never work and on top of that they charge my account. Man what a rip off. Any help? Like today I just bought one; it doesn't work, last week I bought one, it was never delivered. Why would you even want to charge an account if the service does not do what it was intended to do? I am pretty sure you and I know what that one is called

Subscriptions are on a month to month basis. If you exhaust your minutes for the month, the new minutes are not available until the old month completes and the new month begins. If you repurchase the minutes early all you do is extend the subscription for another month. If that particular subscription auto-renews it will bill 3 days before the previous month of minutes expiration time. If you have any old minutes they are usable for those 3 days. If not, you have to wait until those 3 days are up before you can access the new minutes.

Similar Messages

I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

Lmwilliamson wrote:
Kernel panics:
After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists.
I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
I am able to use my computer in Safeboot mode (only)
Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
..Step by Step to fix your Mac
Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

ICal subscription showing tasks but not meetings

I'm using Huddle (http://www.huddle.net) to manage my projects and teams and have successfully been syncing the calendar items I have there with my desktop iCal using a wecal:// calendar subscription url.
However, since upgrading to Snow Leopard and iCal 4.0 this feed still syncs tasks, but not meetings. No error messages are given, the meetings just aren't there.
Any ideas? Surely the ical spec hasn't changed and this is a Snow Leopard issue?
To confirm this I tested it on my Mac Mini which still has Leopard - and it works fine there.
Message was edited by: bfgmartin

I have the same issue with syncing subscription calendars. Just popped up when trying to sync my kids' sports calendars. OK with iCal, but nothing comes into calendars on MM or iPhone.

XML message ok in SXMB_MONI, but not delivered

Hi there,
I am new to PI and have a question regarding monitoring of an interface.
We have a problem that a SOAP request doesn't reach its receiver.
When I have a look at SXMB_MONI the XML message has status "successfully processed" (race flag as indicator).
But if I check on [http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp|http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp], there I see that the message for the same interface has status "not delivered".
It shows me the following error message:
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
How can I investigate more on this to find out why the interface doesn't work?
I have the impression that the monitoring of PI interfaces is quite unstructured.
Is there a good tutorial/blog which shows where to look for this information?
Thanks in advance!

In the message monitoring I've messages with status 'Not delivered'.
If I display them, I just see error messages like
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
Adapter Framework caught exception: null
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
How can I see more detailed error messages???

I'm texting my friend and everything is sending but not delivering. Why is this happening? Did she block me?

Texts that send but not deliver

I know my texts aren't delivering because the word "delivered" would come up under the last text I sent. The word "delivered" is still under my last text to her from a couple days ago, which was the last time I talked to her.

WebRFC Scripting Issue - Works but not from within Personas?

I've attached the Function Module code (it works from within SAP and when called directly from a browser) and a screen shot of the RFC persona call (below)...
Annoyingly I did have it working but I changed it to output more parameters and it went over the 255char limit so I tried to split it into two separate table entries which again appeared to work when testing but not when called from Personas ... then I could get it back... D'oh!!
Blimey - I can't attach a pdf either - please ask for a copy of the function module code if required ... here is a screen shot if you can read it...
I can send the error log to anyone who is interested .... any help much sppreciated.
Thanks.
Patrick.

Please disregard - I got some ABAP help at this end.

Subscription paid but not working

I have paid for an Unlimited world subscription to make calls to Colombia and we have used it for a while. The other day it was disconnected and on the 16/05/2012 I paid for it again to reconnect, when on the internet it says the package is delivered and I have paid for it but I still cannot make calls from my phone. Can you please help, thank you

I did all the stuff you guys mentioned, no go. Called Apple and did some basic stuff, one of them being Turn on Airplane mode then off. Fixed it for me. Here is the basic article from Apple. Great service from Apple again..
http://support.apple.com/kb/TS3274
Ralph

Subscription issue, after it is delivered

I have purchased subscription on the day when previous subscription was to be expired. I have received the e-mail confirmation as well as it is showing in system as "Delivered". But, I'm not able to see this subscription. As I have already used all my minutes from previous subscription, I'm not able to make a call. It has not helped either that there is no direct help from Skype on this.

sabreen-sultana wrote:
it is written that i will get my order on 8th october but still havent received it.
Hello
Your Subscription is due to have the monthly minutes added today - 10/08/14. Please note that minutes are added at or about midnight UTC/GMT on the due date.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Exchange Server 2007 shows email as "Receive" but not "Deliver"

Hi Guys
We have Exchange Server 2007 inside of a SBS 2008 set up.
One specific email from a regular sender wasn't received by the recipient. The recipient is used to receiving messages from this sender and the email is not hiding within Outlook.
Exchange 2007 mail tracker shows the email was received, but that's it. Nothing has happened to the email after that. Normally we'd see a "Deliver" report, or possibly a "Fail", but always something to show the email has been actioned
in some way.
The queues are all empty.
So, this one email has disappeared into the ether of Exchange! So far as I can see, this is the only email with only a "Receive" notification. All others have something else immediately following the Receive.
The Server has GFI anti-spam installed, but that hasn't seen the email either, because emails are collected by Exchange before being passed to GFI. In this instance it hasn't been passed, or returned to the sender as undeliverable. It just seems
to have been eaten.
Would anyone have any sensible suggestions on where to start kicking this email back into life?

Hi Simon
Apologies for the late response, but I only get to this client once a month.
1. Did the sender get NDR? ~ No
2. Let the receiver check the email via OWA and see
whether the email is available. ~ Still not available
3. Use MFCMAPI to check the user mailbox, can you
find the missing email? ~ I haven't yet worked out what is MFCMAPI or how to use it to check, but I suspect that as the Exchange email tracker doesn't have any actions after "Receive" that it cannot have sent the email on to the user's mailbox or rejected
the email as non-deliverable.
The client isn't too willing to expend too much effort
/ cost on this issue which does appear to be a one-off glitch, but I am interested in resolving it for myself as I haven't heard of this problem before.
Thanks for the interest,
Michael D

Subscription Issue - Assembly could not be installed

Hi all
I am attempting to replicate a database based on 2008 R2 to an SQL 2012 server. I have successfully made a transactional distribution on the source server with the snapshot created. The issue is when I create a subscription in the destination
server, it seems to create ok but upon monitoring the subscription, an error is displayed with the message 'Assembly 'smdiagnostics' could not be installed because existing policy would keep it from being used.' Any idea on what this means and how I
can overcome this?
Thanks in advance.

Hi - thanks for your reply on this.
I have narrowed the problem to the functions we have in the database. In one or more of these functions, this dll is used. If I don't include the functions, it replicates OK up to the point of one or more of the SPs trying to reference said functions.
Then it fails (as it's supposed to, because the function are not part of the article setup).
Also, the folder which you have mentioned does not exist. However C:\Windows\assembly\SMDiagnostics.dll does (without
the GAC_MSIL) on both source and destination servers. Both are also version 3.0.0.0.
Subscription can be monitored on the source - this is where the error message is displayed, as well as on the subscription
sync status.
Both servers are running Windows Server 2008 R2.
Thanks.

Subscriptions in Database but not showing in SSRS report

Hi,
I recently migrated our primary SQL server to a new server. Everything has been working without issue and SSRS has also been working without issue.
However I now see that the subscriptions that were created have disappeared from SSRS. However they are visible in the Report Server database subscriptions table.
Is there any reason that I cannot see them in SSRS? How do I get these back? I am an admin and have full rights but cannot view them.
Thanks

Hi JordanWebbBoxit,
In SQL Server Reporting Services (SSRS) migration, we can move the report server databases that are used in a current installation to a SQL Server Database Engine instance that is on a different computer. Both the ReportServer and ReportServerTempdb databases
must be moved or copied together. Subscriptions, cached reports, and snapshots are preserved in the moved database.
However, we must re-create role assignments, subscriptions, shared schedules, report snapshot schedules, custom properties that we set on reports or other items, model item security, and properties that we set on the report server.
There is a tool (Reporting Services Migration Tool) that migrates reports and other artifacts from one report server to another report server. It can also be used as a backup and restore tool for Reporting Services. You can down load from following link:
http://www.microsoft.com/en-in/download/details.aspx?id=29560
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Billing but NOT delivering

On 16 January I got the notification in my Adobe CC 2014 that I needed to renew my subscription within 4 days. But in my subscription manager the option for renewal was not available/visible. I contacted support by telephone who renewed my subscription (already charged on my credit card) and promised me that my subscription manager would be working again. Today my renewed subscription still wasn’t activated and my subscription manager still wasn’t working. I contacted support by telephone, and they appeared to guide my through it all, but ended up corrupting my files my complete computer installation! I asked to speak with her manager, but she refused to put me through. I ended the conversation, and restored my files to the status before this fatal phone call. But now I really want professional help to activate my renewed subscription and get my subscription manager working so this won’t happen a second time.
I’ve also tried the chat option, but that was not available and now I have been waiting for almost 8 hours for someone to contact me and help me!!!!!!
Adrian Tempelaar

This is not an correct answer. Adobe support simply DON'T contact me! and that is just the problem. Nothing works, chat is not available if you try by phone you get redirected to someone how speaks very poorly English and btw corrupted my computer by doing the wrong things, mail is not working because this email address is no longer in use.
So tell me John, how can I get in contact with Adobe again?

How to handle stock already physical issued out but not yet PGI from system

Hello
I have a scenario which I have a question whether reservation is a solution for my problem below:
The following is our current process:
1.
First, create a sales order,
Second, create delivery order, assuming system propose storage location A in the Delivery Order.
Third, the goods are physical issue out to the customer; HOWEVER, it is not PGI out from the sap system. That means goods are physical not in the warehouse but number still show in MMBE.
Forth, we create a reservation MB21 for this physical issued quantity just so it becomes visible in MRP (i.e. available stock reduced).
Fifth, in order to ensure that user is able to distinguish such kind of stock quantity which have been physically sent to customer but still remain in system, we move the stock quantity to another storage location (B).
Sixth, we change the storage location in the delivery order to the “moved-to” storage location (i.e. B).
Finally, when come to the correct time to perform PGI, user will perform PGI in the SAP system.
Questions:
For the step 7, when I perform PGI, how is the reservation document linked to the Delivery Order?
For the step 4, what is the movement type to use in MB21 for this kind of sales order process?
For the step 6, I do not think the storage location is changeable at this stage. If not changeable, it will become an issue as during PGI, system cannot find the stock quantity?
Is reservation a good solution for step 7?
Thanks
Daniel.

if you physically goods issue the stock, then you should do it in your system too.
If the stocks are still owned by you while they are at the customer location, then you are just using the wrong process.
you should go for customer consignment, create a consignment fill-up order in VA01, then a delivery, then goods issue the delivery, this will remove the quantity from your storage location and put it into customer consignment stock directly below plant level in your MMBE.
When the customer consumes the material you create another sales order for consignment withdrawal

Photoshop Photography Program paid but not work?

I have paid for PPP but only Lightroom works, Photoshop CC still says that I only have 30 trial ( now is 25 ).
What's the problem? Or can I cancel my plan?

I have LR5 trial and just signed for CC with PS/LR - CC app says LR is up to date but LR still wants a licence key. Cannot seem to download LR as CC downloader not working

Invoice created, printed, paid but not reflected in CCTR or Customer a/c

Hello,
Our client has created an invoice using VF01. Having created it the same was printed and even the payment was received from the customer. However, there is no reflection of this item in either FBL5N or the CCTR report.
Upon investigation I found that the accounting document for this invoice has not been created yet. This I came to know when I clicked on the button 'accounting document' in the VF03 screen. When I clicked on that button the system gave the message that, 'accounting document has not yet been created'. Most probably the client hasn't used the VFX3 screen to create the accounting document.
My questions are:
1. How can I confirm my belief that VFX3 hasn't been used in this case.
2. If it has not been used then how is it that the invoice could be printed and the customer paid the amount against this invoice also.
3. If I now use VFX3 to create the accounting document, would this show in the Cost Centre report and the customer account as well? (my belief is it would).
Regards.
Suvarghya Dutta

Hello Dutta,
Untill users release the billing document into Accounting, the invoice will not show up on FBL5N report/customer line item display. In your case you can do that from VF02 and click the little green flag, which basicallyh releases to accounting. Once this invoice show up on FBL5N report/Customer line item display, A/R department can apply cash on clear this invoice.
Thanks
Raghu

Subscription issue: Paid, but not delivered

Similar Messages

Maybe you are looking for