Substitution of Account Assignment from Asset Master Data

Hi Gurus,
System is not picking up cost center master data in FI document posting in the following scenario:
Posting in Asset through a transaction type which only post to non leading ledger, cost center is not getting populated in the FI document posted.
For the above issue, I have tried creating a substitution rule with a user exit, but system is not calling this substitution at all - Possible reason being the posting only in loacal ledger and fuction many not available for substituion to work in this situation. I may be wrong but looking at the system behaviour it is not calling the substition at all. I had activated total trace of the substitution but no substitution was called in this case.
In view of the about your expert advise is needed. I try checking BTE available for such situation but did not have any success yet. Any brilliant idea is welcome.
Thanks in advance for your help!!!

hi Murlidhar Khatri ,
we use cost center assignment in our country, also. please use sap note 940758. when you use that sap note, you will send deppreciation costs to cost center which asset is assgined in master data.
sap note 940758:
In Asset Management it is only possible to enter one depreciation account for each asset class. However, depreciation should be posted to different functional accounts for the same asset class depending on the category of the cost center on the master data of the asset.
the link is :
[https://websmp101.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=940758&_NLANG=E]
best regards.

Similar Messages

Account Assignment from Material Master or Goods Receipt Document..

We are on ECC 6.0 instance.
For Vendor Cash Discounts we have all the postings going to a default cost center set up as the default account assignment in the cost element master. Because of the default cost center, the postings are going to the profit center on the default cost center. But the segment getting populated at the line item level is not in line with the segment on the default PC.
This segment is actually the one which is in line with the Profit center in the account assignment on Goods Receipt/Material document or the PC on the Material Master.
Can someone please clarify where this segment would be coming from - from the material master or from the good receipt aka material document?
Edited by: Pete on Jul 22, 2009 3:51 PM

Hi,
In material master you have assigned a profit center and all good movements will post to profit center,which is assigned to materials.in profit center you have assigned a SEGMENT.so automatically all profit center postings will post to SEGMENT.
Hope this helps you.
Thanks,
Anusha

Error in Account Assignment from Material Master to Sale Invoice.

Dear Gurus,
Pls guide me to resolve this problem:
When i am generating Sales Invoice through vf01, system taking Material Assignment Group as 04, but in material Master assignment Group is 03. Due to this system unable to post accounting document.
Every time user changing that material assignment group through VF02 and saving to post account document ( after changing system posting FI doc).
How system take Material Assignment Group in Sale Invoice. Till now i am checking only Material master. Wht are the other parameters to define Material Assignment group in Sales invoice. <b>This is happending to particular one material only</b>
Pls guide me.
Regards,
Venkat

Hi
While you define account assignment in TCode VKOA, you have a provision for defining the gl accounts in the combination of the following:
1. Cust.Grp/MaterialGrp/AcctKey
2. Cust.Grp/Account Key
3. Material Grp/Acct Key
4. General
5. Acct Key
When you save an invoice it searches in the above order to find a GL account.
May be your setting would have been done only in 1st or 3rd ie., assining the GL account in the combination of Cust.Grp/MaterialGrp/AcctKey and GL Account. Hence if the combination doesn't, it would not generate the accounting document.
If your business process agrees you can define gl account in Account key (4) or General (5) also, by which it would generate an accounting document even if it finds a wrong material group.
Regards,
Suraj

Internal Order is not reading from Asset master through derivation Rule

Hi,
I entered Functional Module to read Asset Master data in derivation Rule. While procuring an Asset after selecting an asset the fund center, fund are coming automatically but Internal Order and Cost center is not picking automatically.
It has to pick Internal Order automatically from Asset master data.
Please guide me.
Regards,
Sree

Hi,
Internal order should come from the asset master data, with no connection to derivation strategy in FM. Regarding the cost centre, it's irrelevant when you purchase to an asset.
Regards,
Eli

User Exit - Create Asset Master Data from MIGO

Hi Experts,
I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
Cuold you help me?
Thank a lot.
Kind Regards
Giampaolo

Hi,
Why you want to create the Asset master at the time of MIGO.
Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
If it is that important in your business process then give the authorization of Asset Master data creation to User.
I personally feel this requirement is not feasible.
Regards,
Shayam

No G/L account selected for Asset Account in Business Partner Master Data

Hi All,
When i tried to raise A/P invoice for an Asset Item the system is raised the following error" why?
" No G/L account is selected for Asset Account in Business Partner master data "
thanks
SV Reddy

hi Giri,
When you choose from list against the Asset Account in the business partner master data it is only displaying the Trade Creditors Account domestic and foreign acounts only. which one to choose in this case? i presume trade creditors account is the one to choose. but what is the logic for asset items to choose this Trade Creditors Account? Or else can we create a separate control account for purchasing the Asset items? what is the logic again here choosing a separate account through option create new ?
thanks
SV Reddy

ABUMN - how to bring "Internal Order" from Asset Master to Asset Account

Dear All ,
I have maintained the I/O of the Asset Master . If I did OAYR , the I/O value of the Asset Master could be brought to Depreciation Account automatically when running AFAB. But when I run ABUMN (and ABAVN), the system could not bring the I/O of the Asset Master to Asset Account .
Do you kindly tell me that which config could achieve the my purpose ??
And if I could do it by any configuration , do you have any suggestion to do that ??
User Exit ? or others ??
Many Thanks !
Ian

HI,
You will have to maintain Screen layout in Asset acounting-master data-screen layout-define for asset master data
here goto time dependent data for the asset class.Make plant as a required entry here & save.
Regards,
Saurabh

Upgrade the DB from 2007A to 8.8 PL 10- Error in Fixed Assets Master Data

Dear Expert,
we r using smoothly Fixed Assets Add-on in 2007A environment, Now we are upgrade to SAP B1 8.8 SP00 PL10. When i view the Fixed Assets Master Data by choosing from List Its shows all of my master data list, but when i select any of them system shown nothing in FA Master Data form , please guide
Tahir

Hi,
I think the addon is corrupted. have you reinstall B1 addon ? if you have reinstalled but it is still as same, I suggest to upgrade the B1 version and the addon to the latest i.e. SAp B1 8.8 SP00 PL16. You can also log a message to SAP support but test this case first in the SAP B1 8.8 SP00 PL16 environment.
JimM

How to put equipment no. in Asset master data (manulaly)

Hi Guru
I have implement Asset module and link asset no. to equipment no. come from Plant maintenance module. How I can put the equipment no. in field equipment number / Tab Allocations in Asset master data . How I can do?
thank you very much

Hi
You must have selected 'No synchronize' in Asset accounting for automatic equipment creation view-Specify Conditions for Synchronization of Master Data.
If you wish to assign equipment to Asset after creation of equipment that means you have equipment number with you which is not assigned to any of the Asset and now you want to assign this to Asset master .
Please go to IE02 and go to Organisation tab, here you need to assign your desired asset and save it.
Now go to As03 and see allocation tab, you will find the assigned equipment number here.
If you wish to let system assign equipment number automatically then please the settings in SPRO Asset accountingMasterdata - Specify Conditions for Synchronization of Master Data-Specify Conditions for Synchronization of Master Data to direct synchronization after savings, then you will not be required to assign equipment number manually, as soon as you will create an asset it will create equipment master as well for that asset and you can see in allocation tab, you can also deleat an equipment master if you don't want to create equipment master for a particular asset before saving the asset record.
Cheers
Mukta

About settlement, asset master data's amount column value

Dear Experts,
I build an aseet master data : A (the amount column's value is 0 in asset master data)
Then, I build an asset purchase order assign to A , after I do GR, A's amount column's value change to 1.
But if as follows,
I build two asset master data : B and C ,
B's asset catalog is 167200(prepay for equipment) , c's asset catalog is 153100 (normal fixed asset)
Then , I build an asset purchase order assign to B, then do GR , B has amount 1, and then ,
I do t-code: AIAB , settlement B to C , I found B's amount column's value still show 1 , and C is still 0 ,
but the asset value certainly has transfer from B to C......
why B's amount column's value doesn't be changed?
I can't figured out.
Thanks a lot in advance.
Best Regards,
Yacoa
Edited by: Yacoa Chen on Mar 15, 2011 9:14 AM

Hi
If B is still showing value - It means values are not settled
After AIAB - You need to run AIBU to settle the values.. Did you run AIBU??
Br, Ajay M

Modify fixed asset master data thru migo

Hi experts,
I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
Do you think a way to call AS02 (change asset master data) thru MIGO exists?
Best regards,
Ruben

Hi Ruben,
Did you find a solution to your problem? I have a similar requirement.
I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
Cheers
Wayne

EQUIPMENT ASSIGNMENT TO ASSET MASTER RECORD

Hi All:
I am trying to assign the Equipment Number in the Asset Master Record but am not able to do so. Is it even possible, has anyone had any success with the configurations and can share them with me?
I know that I can create the Equipment Number automatically when creating the Asset Master but what I need to do is to assign an existing Equipment Number to an existing or new Asset Master & the asset number will be reflected on the Equipment Master.
Thanks and Regards
Hisham

What is the problem now? Aren't you able to assign the Equipment number in the Asset master data?
What is the error message?
Well, just try this and see whether it works for you or not.
IMG -> Asset Accounting -> Master Data -> Automatic Creation of Equipment Master Records -> Specify Conditions for Synchronization of Master Data

Cost center not committed on shopping cart, for account assign cat "Asset"

Hello,
We are implementing extended classic scenario in SRM 5.0 with ECC 6.0 backend.
While creating a shopping cart in SRM, in the cost assignment tab when we select an account assignment category as Asset", and then try to enter a value in the cost center in the basic details of cost assignment, it is not getting committed to shopping cart screen. The cost center field value is lost when we move to the next screen for ordering the shopping cart. For the asset related purchases, we are using main account assignment category as "asset" and it also requires cost center, because while the asset master record is being created in R/3 for these items,it requires the cost center. We also using internal order. So for the account assignment category "Asset", the other account assignment fields that can be entered are cost center, internal order and one custom field called "project code".
We have created this user-defined field in the cost assignment tab in the shopping cart, purchase order and confirmation documents in SRM in accordance with the OSS note 672960. We have implemented BBP_CUF_BADI_2 & BBP_DOC_CHANGE_BADI, BBP_DOC_CHECK_BADI for the shopping cart object.
Can someone please help me with this issue?
Thanks,
Krupa

thanks Ramakrishna and Yann for your prompt reply..
Ramakrisha,
I know that for assets, SC requires asset number and G/L is automatically derived from the corresponding asset class from the backend. In our case, we are putting dummy asset number in shopping cart and this asset number exists in R/3. But we are not generating asset creation during shopping cart creation but we are doing it during the PO creation in doc change badi. During this asset generation you also need cost center on the asset record. So we have added cost center field for Asset account assignment category and I can see it in the details of account assignment. But when I enter this cost center on shopping cart, it doesnot get committed, it disappears when I order the shopping cart.
Does anybody have any clue why this might be happening?
Thanks,
Krupa

Donot want asset sub no. inherit capitalized on from asset master.

< MODERATOR: Message locked. Please post this message in the [Asset Accounting forum|SAP ERP Financials - Asset Accounting;. >
i donot want asset sub no. inherit capitalized on from asset master. example asset no 800041-0 capitalized date on 01.01.2000 when i create asset sub number 800041-1 by t-code AS11.
the system copy value capitalized on and ordinary depreciation start.
what should i do to avoid sub number inherit value capitalized on and ordinary depreciation from main asset ?
Edited by: dittaporn nanasilp on Sep 30, 2008 7:27 AM

Hi
Goto-spro-Financial Accounting-Asset Accounting-Master Data-Screen Layout-Define Screen Layout for Asset Master Data-Define Screen Layout for Asset Master Data-select layout-click on logical field groups folder-select posting information-dounle click on field groups rules folder-deselct copy field for capitalization date row
For ordinary depreciation
Goto TCode AO21
select layout-click on field group rules folder-select Ord.dep.start date row and deselect copy field
Cheers
Srinivas

Validation user exit at asset master data

hi all,
at asset master data creation level, if you want to validate company code vs asset class vs equipment type, how do you define validation user exit? Also, we have so many company codes. Do we have to individually validate rules for each and every company code?
Regards,
Rob

Hope the below user exits are useful:
AAPM0001 |Integration of asset accounting and plant maintenance
AINT0001 |Extended checks when posting an asset
AIST0002 |Customer fields in asset master
Pls assign points as wa to say thanks

Substitution of Account Assignment from Asset Master Data

Similar Messages

Maybe you are looking for