Succesful commands for Provisioning Tool(CS6/PC)

Hi,
Have any of you guys had any luck using the Provisioning Tool to unserialize a CS6-installation?
If so - what was the command line you used?
We've tested various commands but none of them have been succesful.
Some gives the return code 1 and a single one gives the return code 0.
The one giving the return code 0 should work, but sadly it doesn't actually unserialize.
Our CS6-package is made using AAMEE and packed as a serialized install.
After the install we plan on unserializing the install, but have no luck doing so.
The reason for this procedure is bad experiences trying to serialize a trial install of CS5.5.
Kenneth

Hi,
First of all some basics about our procedure.
We deploy a serialized version of Master Collection packaged using AAMEE3.0.
Once successfully installed we run this command:
adobe_prtk --tool=UnSerialize --leid=MasterCollection-CS6-Win-GM
to unserialize Master Collection. This gives the return code 0 and leaves us with a trial version.
We then want to serialize to eg. Design & Web Premium - using the Provisioning Tool - and the Master Collection CS6 Install using this command:
adobe_prtk --tool=Serialize --leid=DesignWebSuitePremium-CS6-Win-GM --serial=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx --adobeid=[email protected]
This gives the return code 0.
If we then use the Provisioning Tool to unserialize Design & Web Premium using this command:
adobe_prtk --tool=UnSerialize --leid=DesignWebSuitePremium-CS6-Win-GM
this gives the return code 6.
According to the oobelib.log this should be due to the LEID not being valid.
I don't have a clean oobelig.log and amt3.log at the moment, but could prepare one if you want to take a look at it.
Is it no longer possible to serialize to a different package using the Master Collection-install?
This procedure worked in CS5.5 where we use it today.

Similar Messages

What kind of input for Wrapping tool

Hi
I am using below command for wrapping tool
IntuneMAMPackager -i /Users/xyz/Desktop/upload/myapp.ipa -o /Users/xyz/Desktop/upload/output/myapp_Wrapped.ipa -p /Users/xyz/Desktop/upload/xyz_Distribution.mobileprovision -c 7878200C2E4B2F892BB53E75F4042461474CD112
What kind of input supposed to give for "-i" parameter?
As my understanding we can give input as ".app or .ipa" for the Wrapping tool, Is that correct?
Can we give input as "apps downloaded from apps store"?
Can we give input as "installed apps on the mac machine(eg: App Strore.app)
Can we give input as ".ipa(myapp.ipa) which is created for my app using xcode from developement profile and certificate"?
Can we give input as ".ipa(distrubitioon/enterprise ipa) which is created using xcode from distribution profile and certificate"?
Waiting for your reply,
Regards,
Venkatesh Guttal

The Mini comes with an HDMI->DVI-D adapter. So, if your monitor
supports DVI-D you are set. If it supports HDMI, you just need an
HDMI cable.
If it only supports VGA, you will need a Display Port->VGA adapter.

Since updating to OS X Mavericks I get a continuous update request for command line developer tools. How do I stop this?

Since installing OS X Mavericks, automatic updates keep producing download demand for Command Line Developer tools 6.0 and 6.1. I don't need these but cannot seem to stop the updates available, even if they are downloaded and installed. Can anyone tell me how to stop this?

Try re-indexing Spotlight.
Spotlight – Re-index

Any monitoring tool or administrative commands for Active MQ?

Hi,
I am looking for some monitoring tool or administrative commands for active MQ which can tell me what's happening inside the JMS.
It would help me to understand what's happening within the JMS when publisher publish the messages and when messages are being deleted from topic.
If you know something about it . Please let me know...
Thanks in advance

BTW there's a discussion forum for asking questions specifically about ActiveMQ...
http://forums.logicblaze.com/forums/show/1.page
in particular I think your question just got an answer there :)
http://forums.logicblaze.com/posts/list/75.page
James
http://logicblaze.com/

The sub menus in will not open for my tools in Adobe Illustrator CS6

the sub menus will not open for my tools in adobe illustrator CS6 and I have the "show tool tips" box marked

Click and hold. Or Click-hold and immediately move to the right.

How do I turn off the alt scroll zoom? When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

Known issue: Cortana terminates when typing a voice command for an app (Windows 10 Insider Preview SDK and tools, April 2015 release)

When typing a voice command for an app, e.g., "Find mom on MyApp", Cortana terminates without executing the voice command.

Use the microphone to input voice commands for your app.

Error in updating DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6)

When I tried to update DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6) in Adobe Photoshop I get the following errors in the error log:
DPS Desktop Tools CS6 32.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
Photoshop Camera Raw 8.7.1(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
I purchased Adobe Creative Suite with my Mac so I have an installed version. I have tried rebooting, but to no avail. When I search for help on the site, none of the help explanations fit (e.g., delete a folder that doesn't exist on my computer). I have a 27 inch iMac running OS X Yosemite version 10.10.1. Thanks.

Sscrase what specific error messages did you receive within the installation log files for the update? You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.

How can I use custom WLST commands for Oracle SOA Suite in Weblogic

Hi There,
I'm trying to view and search the weblogic log files using WLST on a Solaris/Unix system.
I have come across this "custom WLST commands for Oracle SOA Suite" and thought of using the custom logging commands to get my task done.
However, my WLST shell is not recognizing the commands and giving me the NameError!
wls:/devDomain1/domainRuntime> listLogs()
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: listLogs
I tried the commands listLogs, displayLogs, getLogLevel & setLogLevel but in vain!
I have followed the instructions as per the oracle recommendation of using Custom WLST commands (http://docs.oracle.com/cd/E29597_01/core.1111/e10105/getstart.htm#ASADM10692) as below
- Launched the WLST shell from Oracle Home.
cd ORACLE_HOME/common/bin
./wlst.sh
- Tried to run the listLogs command from domainRuntime()
I would like to know if I need to import any additional libraries to run the custom WLST commands for Oracle SOA Suite in my WLST shell?
I have only weblogic 10.3.1 server installed on my Solaris 10 machine on which I have deployed the OSB application software.
There is no SOA Suite installed.
Or is there any other way I can browse the Server Log file and get the list of log messages? Basically I would like to use this feature in my script to customize it according to my requirement of listing specific error logs which I can work it out if I know how to make these commands work.
Please advise if this is possible and how?
Cheers.
Satish

I have tried on my OSB installation (no SOA Suite here), the command listLogs() works (I was in online mode, after a connect), and the classpath is:
CLASSPATH=/opt/oracle/fmw11_1_1_5/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/fw11_1_1_5/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.6.0-sun-1.6.0.33.x6_64/lib/tools.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/fmw11_1_1_5/wlserver_10./server/lib/weblogic.jar:/opt/oracle/fmw11_1_1_5/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/fmw111_1_5/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/fmw11_1_1_5/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/optoracle/fmw11_1_1_5/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/opt/oracle/fmw11_1_1_5/oracle_common/moules/oracle.jrf_11.1.1/jrf-wlstman.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lib/adfscripting.jar:/opt/oracl/fmw11_1_1_5/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lb/mdswlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/auditwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_cmmon/common/wlst/resources/igfwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jps-wlst.jar:/optoracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jrf-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/reources/oamap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/opt/oracle/fmw111_1_5/oracle_common/common/wlst/resources/ossoiap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/osoiap.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_comon/common/wlst/resources/sslconfigwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/wsm-wlst.jar:/optoracle/fmw11_1_1_5/utils/config/10.3/config-launch.jar::/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbynet.ar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/drby/lib/derbytools.jar::
The wlst.sh I have used is /opt/oracle/fmw11_1_1_5/osb/common/bin/wlst.sh
I hope this can help

How do you export separate audio tracks for Pro Tools?

I need to give separate audio tracks to my sound mixer but am confused on how to do so in FCP X.
So far I've:
Set the dialogue roles and stems for each character
Then I went into Master File>Settings
Selected:
"Format: Audio Only"
"Audio File Format: Wav File"
"Roles as: Audio only as separate files"
"Dialogue"
Sara
"Stereo"
And when I export and listen back to the wav file, there is either no audio or I hear select dialogue.
The only thing I can think of that I am doing wrong, is that each characters dialogue is not on the same track like the picture below. The tracks highlighted is of one character's dialogue that I am trying to export onto one linear track to export into Pro Tools.
Can tracks be assigned in FCP X? Or is there a crucial step that I am forgetting tthat explains why the audio for each character is not being exported.
Thanks!

If you're dumping audio for ProTools, you should be able to export XML for use in PT. Haven't done it myself, but the option's been there for a while now. You should be able to find instructions easily.
If you want to stick with making Roles work, I suggest making sure the roles are assigned properly to each clip. Kind of a super pain in the neck, to go one by one, but ... that's the way. There are key commands for the three default roles, but if you've created custom ones then it's more time consuming. Is that 'Sara' one a custom Role that you've created?
My only thought is you have compound audio clips there. Maybe go in and set the roles on the individual files inside the compound clips. Dunno...
The visual organization shouldn't matter (one track above another). That's the X way.
((In your picture, you say you have some files selected. When I select, I get a yellow border; yours are light green and dark green. What is that?))

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How to uninstall Command Line Developer Tools

Hello, After upgrade to OSX Mavericks by mistake I downloaded Command Line Developer Tools. I'm not a coder, just a graphic designer and I'm not gonna need it. It's about 300 MB size and I don't want it. The worst part is that its the second time Apple Update shows a new update for this. If I try to move Library/Developer/CommandLineTools folder to trash I'm asked to provide my admin password, so I don't do it because I'm affraid to harm my OS. I've been searching on the web for an answer close to my case but only found uninstall tips related to Xcode that don't apply to me. Can you please help me to get rid of this Command Line Tools? Thanks a lot in advance!

latiffrommexico wrote:
If I try to move Library/Developer/CommandLineTools folder to trash I'm asked to provide my admin password, so I don't do it because I'm affraid to harm my OS.
Do it. It will not harm OS X, and you will be removing the Command Line Developer tools. Nothing will happen to your Mac, but you should make a backup of your files before modifying system files.

Error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"

Hi all,
We are having issues with Adobe Bridge working properly with Photoshop. When trying to access Bridge through Photoshop we receive the following error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"
- We have the Master Collection CS6 installed
- Bridge CS6 is working fine as a stand-alone program
- This is installed on Windows 7 x64
- I am unable to find an uninstall location for Bridge CS6, it is not under control panel > Adobe Master Suite
- All adobe products are up-to-date as of this morning.
Any help would be appreciated.
Thanks,
Message title was edited by: Brett N

Bacterin1 wrote:
It has not worked previously.
Does not make a difference is bridge is open or not.
Yes, we are accessing it through File/browse in bridge.
OK, back to square 1.
Does Bridge work normally? Does it load Bridge CS6 or does CS5 come up? Only one version can run at same time.
If you double click on an image it opens in CS6?

How to export execution commands for all jobs in project?

I would like to export the execution command line windows batch file and text paramater file for over 700 BODS Jobs in a Project folder.
Is there a command line tool or BODS Utility to export execution commands for all jobs in a project?

if you look at the command line most of the information is fixed like job server, port etc., the main thing that you need is the GUID of the job, that you can get from AL_LANG Repo table. You can write a script or a DS job to build this command line and write to a bat and txt file for each job

Script Needed to work with "Save for Web" Tool

I am looking to compress the JPG image files using the Save for Web tool within Photoshop CS2. As you know, this tool yields better results in image quality and file size than the standard Photoshop Save As command.
To this end, I would like to batch process multiple images within multiple sub-folders. Unfortunately, I havent found a process that will allow the use of the Save for Web JPG compression, batch process the JPG files within a sub-folder structure and re-write the images to the same folder.
What I have managed to accomplish up to this point, is create a Photoshop Action incorporating the Save for Web tool. However, the Save for Web menu always prompts to save a file to a specified folder. This seems to be the Catch-22 to the batch processing capabilities. When using Photoshops batch processing feature with this Action, and also enabling include all sub-folders, all the resulting files created are always saved to one specified folder.
I need a script (perhaps Java or Visual Basic) which will run in Photoshop, and allow the use the Save for Web tool (JPG High, Quality 60, Optimized), batch process a series of images contained within a sub-folder structure and then re-write the image files to the same location. Can anyone help with this?

The files must be very large.
On my machine
AMD Athlon 64 3200+ 2.01GHz 1GB Ram
It failed with an uncompressed file 347.6MB (40.9MB on Hard Disc) with not enough memory.
It managed to do a 277.4MB uncompressed file (34.3MB) with no problem although it was slow.
With such large files it might be betted to just do a folder at a time so there are two new vars that you can alter.
MAXJPGSIZE this is the size of the file on the Hard Drive.
SUBFOLDERS setting this to true will include subfolders and false will only process the selected folder.
Paul.
//GLOBAL vars, amend values to suit.
//Maximum size of file in Megabytes to process (This is the file size on the Hard Drive)
MAXJPGSIZE = 34;
// "true" = include subfolders - "false" do not include subfolders
SUBFOLDERS = true;
var imageFolder = Folder.selectDialog("Select the folder with JPGs to process");
if (imageFolder != null) processFolder(imageFolder);
function processFolder(folder) {
    var fileList = folder.getFiles()
     for (var i = 0; i < fileList.length; i++) {
        var file = fileList[i];
if (file instanceof File && file.name.match(/\.jpg$/i)) {
     if((file.length/1024/1024).toFixed(0) < MAXJPGSIZE +1){
              open(file);
var doc = app.activeDocument;
var strtRulerUnits = app.preferences.rulerUnits;
var strtTypeUnits = app.preferences.typeUnits;
app.preferences.rulerUnits = Units.PIXELS;
app.preferences.typeUnits = TypeUnits.PIXELS;
var saveFile = new File(decodeURI(activeDocument.fullName.fsName));
saveFile.remove();
SaveForWeb(saveFile,60);
app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
app.purge(PurgeTarget.ALLCACHES);
$.gc();
app.preferences.rulerUnits = strtRulerUnits;
app.preferences.typeUnits = strtTypeUnits;
} else
if (file instanceof Folder && SUBFOLDERS) {
       processFolder(file);
function SaveForWeb(saveFile,jpegQuality) {
var sfwOptions = new ExportOptionsSaveForWeb();
   sfwOptions.format = SaveDocumentType.JPEG;
   sfwOptions.includeProfile = false;
   sfwOptions.interlaced = 0;
   sfwOptions.optimized = true;
   sfwOptions.quality = jpegQuality;
app.activeDocument.exportDocument(saveFile, ExportType.SAVEFORWEB, sfwOptions);

Succesful commands for Provisioning Tool(CS6/PC)

Similar Messages

Maybe you are looking for