Succesful instalation of 8.1.6
This is my love story .;)
I trying to install this version last 5 days.
And here is results:
RH7.0 - dbassist start to create database, and stops on 0%
RH6.0 - On the same place freeze machine
RH6.1 - Going to 54%, creating JServer and stops with message "Could not open the channel".
I was recompiling kernel, changing MAX parametar, few time reinstall same Linux, but it didn't give any result
And .. on the end of my strengt I installed
SuSE 6.3.... and... supprise.
dbassist was create database, with no errors, I start listener and start DB with no problems too. .;)
That was my story about problems with instalation.
SuSE 7.0 is SWEET!!
Oracle installs and runs almost effortlessly.
I thought it was very considerate of them to have already created a user oracle and teh groups oinstall and dba. And nicer still to have all the synonyms set up in the operating system.
Still looking for that OEM though.
Similar Messages
-
i am trying to download itunes onto my computer, and every time i try it tells me it is succesfully installed, but when i look there is no shortcut or any sign of it at all. this is getting really frustrating, help please?
Hi there,
You may want to take a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
Debian java error in netca and dbca but succesful install in a vm ?!?!
I succesfully installed Oracle 11gR2 32bit on Debian 5.02 32bit in a virtual machine and created a database and a listener, everything works as expected. Now i tried the same installation on a hosted "real" machine with, as far i can see, the same minimalistic Debian 5.02 32bit installation as my virtual machine. The installation went fine on the "real" machine but if i try to start netca or dbca there is a java error:
An unexpected error has been detected by HotSpot Virtual Machine:
+#+
+# SIGSEGV (0xb) at pc=0xa2bbd36e, pid=19555, tid=3085252272+
+#+
+# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)+
+# Problematic frame:+
+# C [libnnz11.so+0x3c36e]+
Has anyone any idea? I spent many hours in different forums, but i found no answer yet. What coulkd be the difference between these machines? What this error means?
I know, Debian ist not officially supported, but in my experience, if some prerequisites are made, Oracle normally works fine with Debian ....
Edited by: user495823 on 15.09.2009 23:56
Edited by: user495823 on 16.09.2009 00:091. Please find out if there is any business reason that the 64-bit hardware is only running a
32-bit OS. If not, then Oracle recommends that you re-install a 64-bit OS and 64-bit Oracle to
avoid published Bug 8930861, “X86 DBCA, NETCA GIVE JAVA HOTSPOT ERROR IF ON X86_64 HARDWARE”
2. If there is some business reason that you must use 64-bit hardware running a
32-bit Linux OS, then before you can use the 11gR2 DBCA or NETCA tools, you will need to apply patch 8670579 , “NETCA/DBCA FAILED WITH HOTSPOT VIRTUAL MACHINE”. You will be downloading and using file p8670579_112010_LINUX.zip
p8670579_112010_LINUX.zip ----->>>>> http://www.megaupload.com/?d=6A29ZU8T -
Can't succesfully install Oracle Database 10g Express Edition on Ubuntu
Hi,
I've been trying to install Oracle Database 10g xe on Ubuntu 10.04 and when I execute the .deb package (oracle-xe-universal_10.2.0.1-1.0_i386.deb) I get a quick installation that doesn't ask me for any configuration settings. When the installation is finished I don't get any menu in my Applications menu named "Oracle Database 10g Express Edition" as specified in Getting Started Guide (I only get some items grouped into an category called "Other" (Backup Database, Get Started, Get Started With Oracle Database 10g Express Edition, Go To Online Forum, Read Documentation, Read Online Help, Register For Online Forum, Restore Database, Run SQL Command Line, Start Database and Stop Database). As a consequence I can't access the Oracle Database Home Page.
In addition when I click on Start Database I get the following message: "Operation failed. josep is not member of 'dba' group".
I've tried to re-download the packages and to configure it by editing /etc/init.d/oracle-xe but this doesn't solve my problem.
can you give me some help?
Thabk you in advance!Markus Waldorf wrote:
Did you run the post-installation?
$ sudo /etc/init.d/oracle-xe configureYes I've done it but it doesn't seem to work... -
Succesfully installed and setup an OWB 10.1.0.4 & Ora10gR2 & Windows 2003?
Hi,
I want to know if anyone has been successful in:
installing
configuring and
having a complete and working development environment using:
Windows 2003 AS SP1
Ora10gR2
OWB 10.1.0.4
Workflow 2.6.3
We tried several times, and after designing our first map we got error ''RPE-01011'' WHEN DEPLOYING A MAP IN OWB 10.1.0.4 RPE-01011
I found several entries reporting the same error, but all the solutions listed didn't work on our environment.
Any help is appreciate
Thanks
SilvioWe had a similar issue and opened a TAR, but no luck from oracle. We figured out that the install looks at 64 bit LD library, but actually uses the 32 bit. After setting this up in the runtime_service.sh script, the deployment went through and we are good to go.
shankar -
Why cant youtube play most videos even after new flash player #11 has been succesfully installed?
why cant youtube play most videos even after the suggested flash player #
11 has been succefully installed?Can you please take a look at this thread, and see if it answers your question? http://forums.adobe.com/message/4937894
-
My mozilla firefox is succesfully installed but it is noy reopening again
ist i was using firefox succesfylly.but after 2 to 3 hrs it stopped responding.thats why i reinstall it.even then it is not working.
Hi there,
You may want to take a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
How to succesfully install Acrobat Pro?
I used to use Acrobat Pro from Adobe CS 4 Design Premium on my Win7 computer. While time passed I purchased CS 5,5 Production Premium (which was full of new versions of software, but Acrobat Pro). Now, after reinstalling system on my computer I decided to reinstall Adobe software as well. Obviously I need only Acrobat Pro from CS4 pack, and whole CS 5,5 pack. Now real challenge comes: how to make it working?
Some explanation: I did as my common sense asked: I installed ONLY Acrobat Pro from CS4 and later CS 5,5. After that Acrobat is asking for another component of CS4 to confirm, and not having it (obviously) it shut down!!!!
Can someone help in this issue? Please I don't want to have two versions of each Adobe program installed (loosing space on my hd) just to have one tiny piece of software.....Unfortunately this solution sounds a bit "absurd" - but perhaps is only solution. To install Acrobat Pro (say 200MB) I need to install at least 4GB of software!!! This is most "unusual". And against my felling of common sense
-
When I try to take a print out from documents in my mailbox, it tell´s me that it can not find the printer??. I have just downloaded epson iprint since I have an Epson wifi printer. The iprint did find and successful installed the printer. Somebody who knows what to do?
Chances are you Can only print from the app from the printer maker
And where you are Trying to print from May only work with AirPrint able printers which the epson would not be -
I have FF 15.0.1 freshly installed on a new Win7-PC (home premium 64bit).
I have tried to install Adobe Flash from their site as well as through the automatically proposed add-on. Both claim it was "installed successfully". But when I check the addon-list, it's not there. Restarting firefox doesn't work.
I have some other plugins (pdf-reader) and extensions (ghostery, adblock) installed and they are working fine.
FF keeps me asking to install the plugin. I install it, and it's not there - asking me to install it. And so on. Could keep me busy for hours ;-(
Please help! Thanks :)There's an addon you can install called Nightly Tester Tools that will disable the addon compatibility check in Firefox. Download it, and it will appear in the, uh, "Firefox" menu (upper left corner). There should be an option that says "force addon compatibility". Check that, then restart Firefox.
There is an option under the about:config page that will turn it off, but I forgot the command. And you DON'T want to mess with the about:config page unless you know what you're doing.
For Java, I found a better answer than "download Palemoon". Here's what I did, don't know if it will work for you.
There are two versions of Java that are safe currently: Java Version 7 Update 7, and Java Version 6 Update 35. I was having a problem getting Firefox to recognize 7 u7, but it could recognize 6 u35 just fine. So here's what I did:
1) I went to Oracle's website and downloaded the JRE directly from them, NOT from Firefox when it says to install the addon. Here is their site: http://www.oracle.com/technetwork/java/javase/downloads/index.html
Make sure you download the JRE, and NOT the JDK, unless you plan on making your own Java apps.
2) Download the following:
Java 7 u 7 (32 bit)
Java 7 u 7 (64 bit)
Java 6 u 35 (32 bit)
Install both Java 7's first, then install Java 6 u 35.
3) When you restart Firefox, go to your addons page and see which Java plugin it is pointing to. If it is pointing to version 6 u 35, then you are having the same problem as me, and I would just keep version 6 u 35. It should work and be compatible with Firefox, cause it worked for me.
If it says it is pointing to Java 7 u 7, then you can uninstall version 6 u 35. I would keep the 64 bit version of 7 u7 just in case you have a 64 bit browser like IE that you want to use it with. But that's what finally worked for me: download all three and throw them at Firefox and hope one of them sticks.
Hope that helps. -
Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO
I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued -
I am having trouble with printing from my MacBook Pro. After succesfully installing a printer, sending a print job results in a alert in the print que that says "on hold Authentication Required"
I am fairly new to Mac and have not the slightest clue what I am doing wrong. Please help!
Thanks, SlojonAfter upgrading to OSX Mountain Lion on one of our home computers and having no difficulty with printer access for months, after a glitch involving loss of power, suddenly "On hold (authentication required)" started showing up.
When I deleted the printer and then tried to add it back using the default listing for the printer I got the message "Unable to download the software from the server at this time." I felt I was going backwards. The whole situation was maddening for a couple of days.
Details:
Older G5 Desktop Mac running OSX Snow Leopard wth an HP Color LaserJet 2550 attached via USB.
Early 2011 13" MacBook Pro running OSX Mountain Lion.
Airport WiFi network.
This is really two problems: how to add a printer successfully and how to print without authentication.
How to add a printer
Do not use the default listing for adding the printer that shows up in the popup menu, instead use the generic "Add printer" command, then select the printer and printer type from the secondary menu that comes up. This worked fine for me.
How to avoid the "Authentication required"
Software update on both machines.
Reset printing system (Option & minus "-" key) on both systems.
Add the printer back to the server (older G5 Mac in my case) system.
Ensure that both the printer sharing is selected for the printer and …
… that printer sharing is turned on globally in the Sharing System Preferences
Add the printer back to the client system
I was also able to work this through the CUPS system described in other posts (http://localhost:631) but I always prefer to let Mac OSX handle the UNIX details since I have greater confidence I won't be inadvertantly messing something up. -
Can anyone help with 10g install problem?
Hi there
I have two problems:
1. When I try to install 10g on Windows 2003 Ent Server the installer fails with "installation failed" verify enough space, 45mb, in c:\..blah... I have 30gig free on c:\ yet the installer continues to fail. I have also run a scan on the disk for bad sectors etc. I've found a few forum comments but no solution. Any ideas? The exact message is:
"Error writing to directory c:\docume~1\admin\..' Please ensure that the directory is writable and has at least 45mb of disk space. Installation cannot continue'
2. I have succesfully installed 10g on XP Pro SP2 however when I launch the em I am presented with:
"The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation"
How do I fix this? I tried various options with no success?
Thanks
BenAfter modifying the listeners.ora file to include the SID I was able to succesfully connect (see below).
SQL> connect sys/<password>@scratch:1521/ora01 as sysdba
Connected.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
TNSPing reports:
Used parameter files:
C:\oracle\product\10.1.0\db_1\network\admin\sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=scratch))(ADDRESS
=(PROTOCOL=TCP)(HOST=157.58.52.20)(PORT=1521)))
OK (10 msec)
However, when I go into launch the EM console via IE, I am continually presented with the following:
The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation.
I am quite confused now. Am I missing something?
Thanks. -
hi friends
i am installing sap 4.7ee on 2003 server with oracle8.17
i have succesfully installed the central instance but while installing the db instance i got the following error at check/adapt file system processing.
PHASE 2007-01-27 20:41:01
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-01-27 20:41:01
SAP Web Application Server
PHASE 2007-01-27 20:41:01
Request common parameters of SAP System
PHASE 2007-01-27 20:41:01
Create operating system accounts
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:01
Request operating system user information
PHASE 2007-01-27 20:41:03
Adapt filesystem
PHASE 2007-01-27 20:41:03
Prepare check/adapt SAP instance filesystem
INFO 2007-01-27 20:41:03
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.4.xml.
INFO 2007-01-27 20:41:03
Creating file C:\SAPinst ORACLE KERNEL\keydb.4.xml.
ERROR 2007-01-27 20:41:03
FSL-02015 Node E:\usr\sap does not exist.
ERROR 2007-01-27 20:41:03
MOS-01082 File system node E:\usr\sap with type DIRECTORY does not exist.
ERROR 2007-01-27 20:41:03
MOS-01105 Processing of one or more file system node operations of table Content of table: t_SAPComponent_Filesystem_Action_SHARED with condition WHERE WapsSystemName='SUN' AND WapsInstanceName='' AND WapsInstanceHost='sunil' AND OpMode = 'CHECKIF' Row[0] WapsSystemName="SUN" WapsInstanceHost="sunil" Key="WAPS_sapdir_dircheck" Condition="false" FollowLinks="TRUE" NodeName="E:\usr\sap" NodeType="DIRECTORY" OpMode="CHECKIF" Row[1] WapsSystemName="SUN" WapsInstanceHost="sunil" Key="WAPS_transdir_dircheck" Condition="false" FollowLinks="TRUE" NodeName="E:\usr\sap\trans" NodeType="DIRECTORY" OpMode="CHECKIF" Row[2] WapsSystemName="SUN" WapsInstanceHost="sunil" Key="WAPS_sapmount_dircheck" Condition="true" FollowLinks="TRUE" NodeName="E:\usr\sap" NodeType="DIRECTORY" OpMode="CHECKIF" failed.
ERROR 2007-01-27 20:41:03
FJS-00012 Error when executing script.
i have no clue what this error is plz help me out.Hi,
Are you installing the CI and DB on different server??
Best Regards,
Sachin. -
Error while installing java and netBeans on Mandriva 2008 linux
Here are all the lines which are printed on my console during the installation
[beloo@localhost Desktop]$ ./jdk-6u4-nb-6_0_1-linux-ml.sh
Configuring the installer...
Searching for JVM on the system...
Preparing bundled JVM ...
Extracting installation data...
Running the installer wizard...
/usr/share/themes/Ia Ora Free/gtk-2.0/gtkrc:9: error: lexical error or unexpected token, expected valid token
[beloo@localhost Desktop]$
If anybody knows the solution please help me!
ps: when i install java separated from netBeans i can succesfully install java, but NetBeans install does not starts.
thxHere are all the lines which are printed on my console during the installation
[beloo@localhost Desktop]$ ./jdk-6u4-nb-6_0_1-linux-ml.sh
Configuring the installer...
Searching for JVM on the system...
Preparing bundled JVM ...
Extracting installation data...
Running the installer wizard...
/usr/share/themes/Ia Ora Free/gtk-2.0/gtkrc:9: error: lexical error or unexpected token, expected valid token
[beloo@localhost Desktop]$
If anybody knows the solution please help me!
ps: when i install java separated from netBeans i can succesfully install java, but NetBeans install does not starts.
thx
Maybe you are looking for
-
Adding more than one title to a clip - is this possible?
Hi I have a 30 second clip, for the first five seconds I want to add a title, then for the next five seconds a different title, etc. Sort of like subtitles as the clip runs along. Is there anyway to do this? Once one title is dropped on the clip, it
-
Mirror Display Option in Macbook Air
Just want to ask where I can find the "Mirror Display" option in my Macbook Air. I can't find it in Displays under System Preferences of my Macbook Air but I can find it in my Macbook Pro.
-
Cannot update my phone using zune getting error 80...
Hi, have bin having problems with zune ever since i installed it.all i wont to do is update my phone but everytime i connect my phone to zune it syncs ok but then says that my phone did not connect to the internet to get updates and if i click on up
-
Hello to all of you. First of all i would like to say that i am very pleased with my new 6210 Navigator. Great phone. But here is the problem that i have. When i bought the phone was allready with maps that i could be using for navigation. Was i naiv
-
This has only happened recently. I search for songs in my itunes library, search finds them but I'm not able to paly them once they've been found. if I want to play a specific song I need to select it manually. Anybody have this issue too?