Succesfully installed and setup an OWB 10.1.0.4 & Ora10gR2 & Windows 2003?

Hi,
I want to know if anyone has been successful in:
installing
configuring and
having a complete and working development environment using:
Windows 2003 AS SP1
Ora10gR2
OWB 10.1.0.4
Workflow 2.6.3
We tried several times, and after designing our first map we got error ''RPE-01011'' WHEN DEPLOYING A MAP IN OWB 10.1.0.4 RPE-01011
I found several entries reporting the same error, but all the solutions listed didn't work on our environment.
Any help is appreciate
Thanks
Silvio

We had a similar issue and opened a TAR, but no luck from oracle. We figured out that the install looks at 64 bit LD library, but actually uses the 32 bit. After setting this up in the runtime_service.sh script, the deployment went through and we are good to go.
shankar

Similar Messages

HT5569 Hi is it possible to install and setup a modem with an iPad only, I would appreciate an answer to this question thanks

Hi is it possible to install and setup a modem with an iPad only, I would appreciate an answer to this question thanks

The configuration page of my router on Safari (tap to enlarge)
See IP Adress at the top (center)

Download install and setup

first computer and would like to learn how to do this.

Hello Pat. Im not sure of the computer it was given to me and older one. But Im trying to download install and setup the Adobe flash player to the computer to download music on the computer. Ive done what it said to do but it keeps taking me back to the same site to download. As I stated this is my first computer and I know "NOTHING" about a computer. Im learning this on my own. So Im asking that you my be able to show me how to do this download install and setup.

I must install and setup TDPO on all nodes RAC?

Hi, everyone
I have oracle rac 9i four nodes and filesystem archivelogs per hosts. without NFS.
my question is. Is necesary to backup de archivelogs install and setup TDPO on each node? and by the way. The node_name is tdpo.config it must be the same on all nodes rac.?
Many Thanks.

A good place to start is http://www.bombich.com/.

Help needed in laymans language to install and setup OfficeJet 8600

Please bear with me. I am a technologically challanged grandma. I am also a loyal HP user. I was recently forced to retire my 8 year old HP 1610 all in one and replaced it, at the suggestion of several saled people, with a new HP Officejet Pro 8600 all in one.
I want to be able to print to the 8600 from my 8 year old Compaq SR 1550NX Presario desktop computer (running Windows XP Home edition ver. 2000 with service pack 3, with Athlon 3500 + processor, 2.4 GHz, 200 GB hard drive) AND from my 3+year old HP G60-243CL Laptop (running Windows Vista (AMD Turion X2 processor, 2.10 GHz, 32 bit opr. sys. Wi-Fi certified).
I have these 2 computer set up on a LAN here in my home connected by a Belkin N+ Router (Ver. 2110) . My Internet service is provided by Charter Cable (NOT DSL). I am read a lot of the directions and help instructions and am still in over my head. Could someone please give me a step by set method of how I can install and set up this new 8600 so I can print from both computers. The old desktop one has never been wirelessly connected. Can I do it through the Router and if so, how? Thank you very much for helping.

Hello, I will gladly assist you with these steps. Have you already set the printer up physically? Are the ink cartridges set in and the printer is ready, just waiting to be downloaded to the computer? If you still have the CD that came with the 8600 printer, all you have to do is place the CD in and click SETUP. This will guide you step by step to install.
Now the tricky part is how you want the 2 PC's connected. You can go USB (hardwire from printer to computer), Wireless (set the printer up on network and PC on network with NO cords attached, or you can go Ethernet (a cord going from the printer to the router).
Let me know how you are able to connect, and I can guide you through those steps.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

How to install and setup macports for mac os mavericks, for open vpn purpose.

Hi Guys! I'm using OS Mavericks now in my macbook pro, I need help and suggestions regarding open vpn application that i can use for my laptop so that i can access my server in my office even im out of town and country. I found vpn network setup in network preference but i dont know how to setup. also others are suggesting macports for mac but still difficult to analyze and setup. I need to troubleshoot in terminal which i'm not familiar with commands. Please help me guys! Please!

You're going to need to figure out the required settings for the VPN server you're working with, whether you use the standard client or some add-on. That information is a prerequisite for a VPN client; for any VPN client.
If the standard VPN client present in OS X doesn't and cannot be gotten to work, then something like IPSecuritas or the OpenVPN client would be a typical fallback choice, but IPSecuritas is far more flexible — which means far more complex. These clients are available as application downloads; no Brew or MacPorts required.
Is this your server you're connecting into? Or is somebody else controlling it?
If it's your server and thus your VPN server, then you'll have the option to get either the VPN server in the gateway firewall box or the VPN server running in the target system configured to allow the OS X VPN client to work.
If the server is controlled by somebody else, ask them for the settings necessary for the VPN client.
As Barney-15E states, using Brew or MacPorts won't help, unless you're installing the VPN client that way — which would be a little unusual — and you're still going to have to figure out the L2TP / IPSec or PPTP or other settings here, irrespective of how the VPN client gets installed.

Arch linux install and setup questions

Personally it seems a bit to cumbersome to have to setup xorg etc and is proving to be difficult in getting it to work right. Do they have any arch forks that just auto detect the xorg settings like some of the other distros?
I can't see myself having to setup several of these boxes and doing these install steps one at a time for each one.
It would seem arch could just run a script once installed that would auto sync, download xorg, and setup xorg at the same time.
it would be no different that following each step in the wiki by hand, just via script

itsmeh wrote:Yup it was just an idea , sure people can still do it manual but maybe have something built in to at least take care of the first few steps that most users are going to use
That's the whole point with arch. It's all up to you. Arch doesn't suggest anything for you (exept what you need to get a working linux enviroment).
This is the reason i installed arch. I wanted control over my inviromet and learn more about what's under the hood.

How to install and configure Exchange Server 2010 DR (disaster recovery) on Windows server 2012.

We need to install and configure Exchange Server 2010 with DR(disaster recovery on Server 2012.
Pls suggest step by step.
Pankaj Kumar

Hi,
Here is an article which may help you for your reference.
Deploying High Availability and Site Resilience
https://technet.microsoft.com/en-us/library/dd638129(v=exchg.141).aspx
Besides, there is a related thread here.
https://social.technet.microsoft.com/Forums/exchange/en-US/577c9433-a20b-442e-8ce7-be59aea35855/preparation-for-deploying-exchange-2010-servers-at-remote-site-dr-site?forum=exchangesvrdeploylegacy
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support

Installing ArcSDE 9.2 for Oracle version 10G R2 on Windows 2003 x64

We submitted this question on an ESRI user forum, but we would also like to submit it elsewhere to ensure an answer.
We are trying to install ArcSDE 9.2 for Oracle. The version of Oracle is 10G R2 (10.2.0.1). The server is a Windows 2003 R2 Enterprise x64 edition with SP1. There are now 2 instances of Oracle on the server, but this problem originally occurred when there was only one instance. The issue: ArcSDE 9.2 apparently installs just fine. There are no error messages during the run of the installation process. However, when the Post-Installation process is called, a critical error alert pops up reporting, "The application failed to start because OCI.dll was not found. Reinstalling the application might fix this problem." ArcSDE has been uninstalled and reinstalled several times. Oracle has been uninstalled and reinstalled several times. Various searches have been made, concerning this error message. On Friday the only ESRI Article we could find mentioning this error was Article ID: 25388 which stated that the "ORA81/bin" directory needed to be added to the PATH environment variable. However, today we found a new ESRI forum entry dated 6/2/2007 with the querystring "c=2&f=1717&t=223961" in which someone reported the need to install the 32 bit Oracle_HOME. However the ESRI Support Center article he referenced, (dated November 14, 2006), stated that the 32 bit Oracle Client needed to be installed to a different Oracle_HOME and the service name created for it, is to be used in the Post-Installation process. And finally our Oracle DBA reported seeing another Support Center Article which stated that the 32 bit versions of the Oracle libraries are installed by default in a different location, and it was only necessary to add that location to the PATH environment variable. I have also seen information on Oracle forums stating that this message means that the Oracle client needed to be installed, but our Oracle DBA reports that this is installed by default with Oracle DB server. My question is of course which if any of these solutions is correct?
E.R. Joell MCSD MCDBA

I have managed an ORacle/ArcSDE environment for many years where multiple SIDs were running.
If it doesn't know which SID then it would indicate that it is picking up the wrong ORACLE_SID environment setting. To be honest, UNIX is an easier environment to operate software in as one can set environment variables to suit software very directly. Now I have not run ArcSDE on a Windows environment before so any suggestions I have may not work as I write them.
Still, I would suggest you consider writing a CMD/batch script that:
1. Set all appropriate Oracle environment variables DIRECTLY eg
SET ORACLE_BASE=c:\oracle\product
SET ORACLE_HOME=c:\oracle\product\10.2.01
SET ORACLE_SID=...
2. Set the ArcSDE environment
3. Sets the Path to include all Oracle, ArcSDE and required Windows executables
4. Start the ArcSDE service:
NET START ESRARCSDE (or whatever this thing is called)
I suspect if you can get this going you will never go back to any other method of starting and managing ArcSDE (this approach works and works well on UNIX so you will be all skilled up to migrate across to Linux/Solaris etc if you see fit).
Hope this helps.
PS I have run ArcSDE against non-supported versions quite successfully over the years so I would say try it against 10.2.0.1 and see what happens.
regards
Smon

Unable to install policy agent 2.2 for Webserver 6.1 on Windows 2003

Hi everybody,
I've installed Java Enterprise Server (last version) on Windows 2003 with these components:
- Directory Server
- Access Manager
- Webserver
- Administration Server
Everything works good, I can access all those components.
Now I want to use Policy Agent 2.2. So I've downloaded it and I've tried to install...
But during the installation process, an error message appear when I select the Web Server instance directory to protect.
It says: "invalid web server instance - on windows, Access Manager Policy Agent only supports Web Server 6.0 and 6.1.....".
The problem is that I work with WebServer 6.1....
I really don't know what to do now... This message prevent me to go further.
What's the problem? How can I avoid this?
Thanks for your help!
Adrien

Okay, here's what it says:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, ot the updgrade pathc may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct update patch".
I don't even know what program I'm supposed to have.
Ideas, anyone?

ORA-00020 and Ora-12519 error contineous in 10g Enterprise on Windows 2003

Hello Experts,
I have Oracle 10g installed on windows 2003 server (64 bit), No issue with Storage (1TB) x5450 @3 GHz and 16 GB RAM.
DB size is approx. 9 GB.
We are facing this isue again and again. We tried to restart DB and after some hours we see the same issue.
I check the Processes and session on INIT<SID>.ora file and was confugured to 750 each. I also check the no. of Inactive process (thru SYS login) and it shows me 728-729. Nos. of backgroung processes are 20.
Can some expert show me the path to get success on this issue asap? This is PRODUCTION server and we can not reboot as many times as we can (you understand) :-).
maximum number of processes (%s) exceeded. HELP?????

Thanks for the quick reply,
Here is the output...
MACHINE COUNT(*)
JCLM-PSDATA-S1 19
JCLMPS\JCLM-PSDATA-S1 1
JCLM-psapp-s1 33
JCLM-psapp-s2 19
JCLM-psapp-s3 18
JCLM-psapp-s4 19
JCLM-psapp-s5 17
JCLM-psapp-s6 17
JCLM-psdata-s1 525
JCLM-psrpt-s1 15
JCLM-psrpt-s2 18
MACHINE COUNT(*)
JCLM-pstch-s1 6
JCLM-pstch-s2 7
JCLM-pstch-s3 25
JCLM-pstch-s4 9
15 rows selected.
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 64-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Edited by: user1125897 on Sep 13, 2010 7:41 AM

Installing Oracle 10.1.0.2.0 (32 bit) on windows 2003 server

Hi all,
During installation of Oracle 10.1.0.2.0 (32 bit) on windows 2003 server 64 bit standard edition there is failure in Oracle Net configuration , oracle Data Base configuration Assistance.
and i saw the log file of the installtion but its very complex and saying some Unexpected error occured and showing some coding. any suggestions about this. thanks in advance.
BEST REGARDS
Edited by: user11153253 on Jan 10, 2011 11:57 PM

user11153253 wrote:
Hi all,
During installation of Oracle 10.1.0.2.0 (32 bit) on windows 2003 server 64 bit standard edition there is failure in Oracle Net configuration , oracle Data Base configuration Assistance.
and i saw the log file of the installtion but its very complex and saying some Unexpected error occured and showing some coding. any suggestions about this. thanks in advance.
BEST REGARDS
Edited by: user11153253 on Jan 10, 2011 11:57 PMYes, I would suggest you actually show us the error message. All of our crystal balls are out for repair at this time.
"My car won't start. It makes funny sounds when I try. I looked under the hood and saw a lot of complex machinery. Any suggestions on how to start my car?"

Driver won't install and setup won't finish on windows 8.1 64bit

Hi
We have a HP PSC 1410 All-In-One installed on an old pc with windows 7 and the printer is working fine but I decided to move the printer and plug it in on my brand new ultra high end gaming pc with win 8.1 64bit on it for obvious reasons, because the pc is alot faster. Pc config: i5 2500k 4GHZ, 16 GB RAM, Nvidia GTX 970 4 GB, you get the picture a very fast gaming pc lol.
I downloaded the proper driver on the hp support website and started the setup and windows doesn't recognize the printer and the driver.
Everytime I uninstall and reinstall the driver I get this error:
It seems to be my even though HP claims that they have windows 8.1 driver support for my printer, it actually doesn't support it. Because I even tried to install it on my HP (the irony lol) laptop with win 8.1 on it and it doesn't work. I get the same problems and errors.
So to recap it: setup won't complete, gives me an error and then uninstalls the software by itself ....
Can anyone confirm that this specific printer model works on win 8.1? If yes, why doesn't it work on both my pc and laptop with win 8.1? Why does it only work on my old pc with win 7?
It's really a shame because the printer (even though it's very old) is still great and I like it, I just wish it would work on my new pc.
If anyone knows how to fix this or with a workaround please do share.
Regards
Elvis

Hiya @Elvis29,
First and foremost, I apologize for the delay, I have been researching what could be causing this issue, and more importantly what we can do to resolve it.
Please complete the following steps and let me know the outcome of your efforts;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
I think in order to get the install package to install properly it would be best to unlock the admin account, then try to install again.
Let's begin with a clean boot first; How to perform a clean boot in Windows
How to Unlock Admin Account:
Open an Elevated Command Prompt in Windows 8 & 8.1 (Instructions here)
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
Next, close CMD and restart your computer
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked
Under the Administrator account download and install the drivers using the Printer Install Wizard.
The Printer Install Wizard will by pass the Windows Installer. This runs its only installer or install shield, which will interact independent of the Windows Installer. This may allow the file that cannot be found, to be found and let the install finish. HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
If everything installs fine, log out of this account and back into your normal user account. All the Software and Drivers for your product should show installed now on your account.
If everything works fine, you will want to Hide the Administrator account.
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
Next, close CMD and restart your computer
Please keep me posted.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Install and setup problem with Acrobat XI pro

I have downloaded the Acrobat XI Pro trial program, with no error messages. When I clisk on "setup.exe" the following error message appears, see screen shot :
"This patch package could not be opened. Verify that the patch package exixts and that you can access it, or contact the application vendor to verify that this is a valid Windose Installer patch package"
How do I get setup to start?

@Jeff -- Yes I did use theDownload assistant. Down load completed and assistant started the insall. Received the error message and install terminated. Searched for and found the install folder and have tried install by clicking on"setup.exe". Have not tried a fresh download, did the MSI logging, see next reply.
@LeoAdobeX -- I renamed the file\folder path and eliminated all spaces. Clicked setup.exe and received same error message.
Enabled MSI logging and tried setup.exe, received same error message. Have posted 2 most recent MSI files and the setup.ini file. Here are the links:
https://workspaces.acrobat.com/?d=SxkkNEXK*bJLZnkDjFdWiQ
https://workspaces.acrobat.com/?d=Mdt6KyNSpBViV3h2ZC2pUg
https://workspaces.acrobat.com/?d=AOxVXVIBozy1XrFDwzljoQ
Thanks for your help. Will stand by,

Client Install and Setup on work station

Hi all,
Is there anybody who knows how to install the client software on the work station, configure, connect to server and what are the pre requisites before you install the client software on the work station.
thanks
SV Reddy

Hi,
I do not know if you have set connection to server SBO.
You could test connection by ping the server IP or server name.
Also make sure that SQL server browser is started. You could start it from SQL server configuration manager --> SQL server 2005 services.
Open the SQL server 2005 Network configuration > protocols for server...> TCP/IP --> enabled and its properties, make sure the TCP port is 1433, named piped is also enabled. Check IP Address availability in TCP/IP properties --> IP address.
Once all of the settings completed, you install the SQL server native client in the client PC.
After finished it, just run -->
your server name or its IP address\B1-SHR, you can open B1-SHR folder, then look for client setup exe. Double click and installation process begins. You fill server name and its password that requested in one of the installation steps.
Rgds,

Succesfully installed and setup an OWB 10.1.0.4 & Ora10gR2 & Windows 2003?

Similar Messages

Maybe you are looking for