Suggestion after a screen issue

Hi, I'd like to know your opinion about this problem I experienced twice since I own my MacBook Pro (Penryn). My Mac was on in sleep mode, when I started to work again I noticed a problem in the display: it seemd like everything was ultra bright (like a spreading white sensation) and the colors were opaque... I just closed the lid and opened it again and the problem was gone, the colors were back to normal. What's wrong? Is that a sign of pre faliure and should I bring it to my Apple Store?
Thanks

Read this:
http://support.apple.com/kb/TS2377
and keep an eye out for a reoccurrence.

Similar Messages

  • Palm TX replacement unit has white screen issues even after hard reset

    I hope somebody can help me find a solution.
       I was a happy Palm OS user since the early days of Palm III.  After a Palm III and a V, had a Sony Clie that lasted a long time, but finally pooped out, went to a Z22 and broke the screen, then almost but not quite a year ago (in warranty, supposedly), purchased a Palm TX.  Worked great for a while but ended up with a unit I couldn't turn on or off because the power switch had died.  Worked around that by keeping the sync cord in and powering on by pushing the button and then canceling.  Finally sent it in for in-warranty repair.  Got back a new-to-me unit.  
       This worked fine for almost a month, then it started (with no new software or usage patterns) to have blank screen issues.  To solve this I have tried many things.  Soft resets, hard resets, leaving it to fully run out its battery for weeks at a time.  Nothing works; it continues to go blank on me.  In addition, the sound is strange and screechy when it beeps (e.g. accepting time zone after reset).  I bought the TX in the US when I was home for a visit last July, but am living in the Netherlands currently.
       I contacted the Palm repair center in the UK that replaced my original unit; they said would pass on word of my troubles to Palm and Palm should contact me, otherwise to e-mail them.  They haven't.  I can't find an e-mail address for to explain all of this to anyone with any power to help me.  I have tried to use the Palm support website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now is showing up as eligible for warranty repair.  I have tried to call the US Palm support number (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "calling is temporarily unavailable."  When I click "here" when asked "If you wish to query the warranty status of your handheld, or would prefer to arrange a repair through our Technical Support service, click here" (https://www.euroservice.palm.com/repair_entry/NLD/EE) I end up on a page that says simply "Please Enter the Source Url."  I am hesitant to supply credit card information for an issue that, if it can't be covered under warranty (which I think it should be, since I'm still within the original 12 month warranty period), I may well abandon.
        I am very frustrated in trying to get this fixed.  I am disappointed in the dwindling support for a PDA (that is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, reader, dbs, cookbook, checklist, etc., I am seriously considering leaving the Palm OS.  My preference is to get this fixed, and my idea nearly a year ago was to ride the Palm OS until it disappeared completely (subsumed into phones anyway), but my problems have discouraged me to the point that I am wondering if this is my end.
       Does anyone have a suggestion?
    Post relates to: Palm TX
    This question was solved.
    View Solution.

    Thanks for your help!
    I don't know how to tell for certain if this is a US or a UK device, but it looks identical to the one I bought in a store in Seattle, and the first five and the last two num/letters of the serial number are identical.  I do know that when I sent it in originally for the power button failure, that the Palm repair center understood that it was a Palm purchased in the States.  Their description of the goods received is "Palm TX , US and ML" so it seems apparent that they knew it was a US device and rather than refusing to repair it, they had me send it to them.  And when my repair was returned, the repair details list "unit exchange" and type of unit is again listed as Palm TX US & ML.
    Well, regardless, I appreciate your pointing me in the right directions to someone who can help me.
    Ironically, I am no longer having the same issues with the Palm.  The latest round of letting the power run out after a hard reset and sit for a few weeks seems to have "fixed" it.  At least, I have been trying to break it (by using it) without success.  Recharged it, synced it, checked and sent mail with it, used all the programs I used to, and I haven't had a white screen in the past few days.  Hope my luck continues, but I don't trust it.  All hail frequent syncing.
    Thanks again. 

  • Flickering Screen issue after Mavericks update released on Feb 26, 2014

    I own a Macbook Retina display bought in early 2014. After installing the recent Maverick update released around Feb 26, 2014 the display developed flickering problem while scrolling and now the scrolling is not smooth any more. The originally shipped machine did not have this problem. I tested other software including Photoshop and the display still flickers while panning the canvas. I also tried resetting the SMC - System Management Controller but it didn't work along with other attempts of resetting the disk permissions, running a systems cleaner, changing the wifi-router etc.
    How to fix this flickering screen issue?

    The problem came back lately and I tried this solution and it worked. Go to system settings > power saver > and switch off the Automatic Graphic switching. Not sure if this is a good solution, but it seem to have worked for the time being.

  • Is this legit?             Confirm your email address  Dear Email Users,  As part of our security measures, we regularly screen activity in the E-mail system and after noticing an issue on your account password, we are requesting confirmation from you for

      Is this legit?
       Apple Support Team <applsupporteam @icloud.com>
           Confirm your email address
    Dear Email Users,
    As part of our security measures, we regularly screen activity in the E-mail system
    and after noticing an issue on your account password, we are requesting confirmation
    from you for the following reason:
    Our system requires further password verification.
    In accordance with E-mailUser Agreement, your account access will remain limited
    until the issue has been resolved. Unfortunately, if access to your account remains
    limited for an extended period of time, it may result in further limitations or
    eventual account closure.
    To verify your E-mail account, you must reply to this email
    immediately and enter your following
    information.
    First Name:
    Last Name:
    Email Username :
    Email Password :
    Thank you for using webmail
    Icloud. com support team
    <Edited By Host>

    Apple requests that you forward these types of emails to them as follows (from http://support.apple.com/kb/HT4933):
    If you receive a suspicious email, select the message text so that it is highlighted. Choose Forward as Attachmentfrom the Message menu (OS X Mail) or the Actions menu (Outlook). Send the email to [email protected] This provides Apple's legal department and law enforcement with useful information to help prevent future phishing emails.

  • Lightroom CC will not open after splash screen. Adobe suggested fixes don't work. Can't find a damn phone number to call them.

    Adobe fixes do not work. Can't find a tech phone number.

    Robert,
    I'm sorry you are having troubles. Did you try both option one and two in this link:
    Lightroom doesn't launch or quits automatically after splash screen
    If those don't work, feel free to go to the contact us page and then click the "Still need help? Contact us." button for support.
    Pattie

  • Lenovo G460: Unable to proceed after Lenovo Screen

    Hi,
    I have Windows 8 installed on Lenovo G460 and it was working fine. Suddenly from last 2 days it got struck after Lenovo screen which has F2 - Bios Setting and F12 - Boot Order selection. Even F2 - Bios is not loading (Says Entering Setup ...) and hung over there.
    I have changed one setting before I had this problem in Bios from Compatible to AHCI. I am not sure if this is the problem. In order to change this back, its not loading the Bios as well.
    Please help me to resolve this.
    Solved!
    Go to Solution.

    Hi,
    Lenovo Splash screen is where the system check all Hardware Needed for the system to continue.
    Before you can enter BIOS It is also needed that all the hardware is initialized.
    If that does not happened the system will not Boot or even boot to BIOS.
    If your system is still under warranty I strongly suggest to call Lenovo Technical Team for Hardware Assistance.
     Its  possible that a device is not initializing when Turning on the system or trying to boot to BIOS.
    But if your comfortable with this you can Check this Hardware Maintenance Manual. And check the removal guide of some Parts.
    First Try removing the Hard drive and see if that is what is causing the System to stop responding
    Then Check the memory, If you have two memory module then try just one module to two slots.
    But my guess here is the Hard drive
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Creative Zen X-fi (with lan) white screen issues

    ?Hello everyone, So I've been having my zen x-fi for a few months and it has been working excellently...until yesterday when it suddently (after what might have been a lightly hit, I had it in my front pocket and bumped in lightly into some object)...well suddently the screen went white but kind of still something black there (see photo below) <a rel="nofollow" target="_blank" href="http://img40.imageshack.us/img40/666/dscf2249redigerad.jpg"]http://img40.imageshack.us/img40/666/dscf2249redigerad.jpg[/url] I have been looking into troubleshooting about this particular issue, but what is suggested there under the white screen-issue is to reset and update firmware, something I did already first thing after it happened. The thing is that other than the screen being a quaking mess, it seems to otherwise be in working condition, because when I turn it on and push the play button music will still play as before. it's just the screen that is the problem. Any ideas? Best wishes, Babba

    Hello there, thank you for your welcome. That is sad info about my music player though, I liked it so much while it was still working. unfortunately im not within the warrant period so I will have to invest in a new one. thank you for your help though. I will look into which creative player is the best one within my price range

  • Screen Issue with HP G7000 laptop

    Hi there,
    I bought a second hand HP G7000 laptop preinstalled with Windows Vista Home Premium x86 a few days ago, the problem with it was that the screen wouldn't light up even when plugged the laptop was plugged in using the AC adapter which I also had to buy seperately as the original one was misplaced and only cost me £10 for a compatible one off the Internet, the screen wasn't shattered and showed no signs of wear and tear, I took it to my local PC repair shop for £40 in which the contacts behind the screen needed connecting back up and with a little soldering for some other parts of the repair, however when I tookit  back to my place the screen lit up fine in which I decided to perform a factory restore to make it feel like it was brand new and that it belonged to me. After restoring the laptop successfully, I noticed that a lot of stuff was a little out-of-date and decided to update it to make it compliant with the latest security fixes as well as the latest bug fixes i.e. to upgrade to SP2 etc, however upon updating and turning on the laptop every so often the display kept going funny i.e. black and white and wouldn't display anything clearly in which I had to keep forcing the laptop to shut down with using the power button in which I don't like doing as this will corrupt the hard drive eventually, however upon researching this problem on the Internet I stumbled across this forum thread http://www.techsupportforum.com/forums/f108/hp-g7000-screen-issue-529809.html using Google describing a very similar problem to me, the problem not only seems to be with tilting the angle of the screen but also the surface in which the unit is placed down on, I've tried various surfaces including my USB fan cooler, glass and wood and all produce various results from time to time. So I guess the answer is to place the unit down on a flat surface that isn't shiny and screen not tilting when using the laptop? I thought the purpose of a laptop was to make computing mobile regardless of what surface you place the unit  down on and what angle you have the screen at. Your feedback and suggestions would be much appreciated.
    Kind regards,
    RocknRollTim
    P.S. I also suspect that the problem is related to interference and lighting conditions as well as heating conditions and the battery as the battery sometimes retains its charge whereas sometimes it doesn't and have to use the AC adapter when this happens, don't know whether flashing the BIOS has helped the battery to retain its charge though.
    This question was solved.
    View Solution.

    Hello @RocknRollTim,
    I understand that your notebook computer is experiencing an issue with the display screen as well as keeping a charge with the battery, and I would be happy to assist you in this matter!
    To further diagnose the integrity of your computer's battery, I recommend following this document on Calibrating the Notebook Battery (Windows Vista). This should help re-synchronize the battery with your notebook. 
    Because the display intermittently stays on the screen when moved a certain angle, I believe the display panel cables are defective. According to the Maintenance and Service Guide for your computer, this part can be replaced with a camera (462455-001) or without (454932-001), and can be found from the multiple vendors below:
    (With Webcam)
    https://www.google.com/search?q=462455-001&oq=462455-001&aqs=chrome..69i57.133j0j4&sourceid=chrome&e...
    (Without Webcam)
    https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=454932-001
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues.  Now getting error "You can only install one Adobe product at a time.  Please complete the other installation before attempting to install ......."  There is no other Adobe

    I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues.  Now getting error "You can only install one Adobe product at a time.  Please complete the other installation before attempting to install ......."  There is no other Adobe product installing.  I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked.  I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.  Please help.

    A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
    Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
    Mylenium

  • N8/C7 PURPLE SCREEN ISSUE AND HOW TO SPOT IF YOU H...

    MODS THIS IS NOT A POLL OR IN ANYWAY SHAPE OR FORM A VOTING THREAD IT IS A THREAD TO WARN USERS ABOUT THE PURPLE SCREEN ISSUE AND HOW TO SPOT IT IN THEIR PHONES CLEAR AS DAY , I HAVE BEEN INFORMED FROM THE DIRECTOR OF COMUNICATIONS AT NOKIA VIA TWITTER THAT THIS THREAD IS OK AND THE TEST IMAGE IS FINE TO LOAD UP
    The following has been added by vandelay (Nokia administrator) :
    Please note that there is normally a slight variation in the purple color level in each display
    unit. This is related to the display manufacturer's optical tuning process. However, some Nokia C7 and Nokia N8 users seem to be experiencing a
    slightly higher level of purple color tint on their device screens.
    Nokia Care's technical experts told me that the easiest way to spot this problem is to just look at the black idle screen of the device - if there is a clear purple color tint on the idle screen, you should have the device inspected at a Nokia Care point. They will repair the device the device under warranty if there is a clear defect in the device.
    So seeing some purple on the test image does not necessarily mean that your screen is faulty, but we hope that it helps some people to decide whether they should visit a Nokia Care point.
    (end of vandelay's addition)
    as you may or may not have read many n8s and c7s have a purple tint issue
    this can easily be spoted by saving the picture below to your pc , transfering it to your n8/c7 , then viewing the image in your gallery
    if the image shows purple squares in some areas then iam afraid you have one of the screens that is showing defects in gradiation of colurs and the greyscale
    there are also many n8s out in the wild that dont have this problem , i have 3 n8s , my gfriend has one , hers is perfect and shows the test image with no purple tint at all my three n8s all have purple tint and some display it worse then others
    the test image can be viewed on any brightness and it should display just as it does on your monitor screen ,my gfriends n8 displays the image perfect under all brightness levels yet my three n8s show the purple tint heavily on low brightness and not as much on full brightness
    the test image can also be viewed via tv out and hdmi out and again if you have a defect screen you will see the image perfect on your tv yet on your n8 screen you will have purple tints
    here is the test image for you to load to your device and view via the gallery
    as stated above if you have one of the screens with defects in colour gradiation you will see some of the squares as purple
    this shouldnt be happending as there n8s out there that display the test image perfectly
    from all my research on this in the last month and my time studying ICT systems support in which i have a diploma , it seems clear to me that nokia have used at least two screens in the build of the n8
    many phones bought between october launch and december dont have the problem yet there are still some that do but not as many as now , phones bought from the end of december up untill current date seem to have the issue moreand its now nearly impossible to find one without the purple tint issue
    this leads me to believe that from the start nokia were using at least two screen in the n8 , then one started to run out around december and by the end of december a huge majority of n8/c7 handsets have the troubles, if not all of them shipped after december
    infact ive been to every phone shop in lakeside , chelmsford , colchester which included : carphone warehouse , o2 , vodafone , orange , three ,  phones4u , tmobile all n8/c7 handsets i asked to look at had the problem not one n8 i looked at didnt have the issue 
    i have been in contact with nokia care escalation team , all they did is send me very badly refurbed handsets back for my brand new n8s ,  which across all three handsets had the following faults
    #hdmi covers scratched and worn
    #no imei number under the hdmi cover on one of them
    #torx screws on battery cover very worn
    #plastic top caps not fitted right
    #one had a huge gap between the silver screen surround and the main chasis of n8
    #they all still had purple tint issue
    so nokia sent me three refurbed handsets for my brand new n8s , i obvously complained as they were so new i could have taken them back to the shops with the reciept but now nokia had changed the imei numbers my reciept was useless , i said i should be sent three brand new n8s , they again sent me badly refurbed handsets just as bad as the 1st lot and again all three of them had purple screen issues 
    i complained again and this time supervsior took over the case and agreed that 3 new n8s should be sent to me as mine was so new , she got them sent out and this time they were new but they still have the purple screen issue
    thats a toatal 12 n8s direct from nokia and all of them have had the issue  so i cant recomend going to a nokia care point or nokia care uk as the refurbs i was sent was a complete joke and looked like they were just used handsets that had been through a rough time
    through this month of me talking to nokia and sending emails and getting these phones swapped back to a condition of the phones that i sent them , they have said they are investigating it and taking it seriously however after some of their actions towards users (myself included) on these forums it doesnt seem like they are taking it very serious at all , they have known about it for a month now and we still have not had an offical response from nokia themselves
    if you would like to read more infomation on this problem and to see how wide spread it is then please check the following links
    http://www.nokiausers.net/forum/nokia-n8/39462-i-think-nokia-using-two-different-types-screen-n8-may...
    http://www.nokiausers.net/forum/nokia-n8/39532-n8-purple-screen-test-please-take-part-if-you-have-n8...
    http://www.allaboutsymbian.com/news/item/12604_Defective_screens_found_in_som.php
    http://forum.dailymobile.se/index.php?topic=39665.0
    http://www.nokiadna.com/2011/02/nokia-n8-nokia-c7-oled-screen-issues-plauge-nokia-users/
    http://n8geeks.com/nokia-n8-amoled-display-issue/
    there are many more threads about this issue across the net and if you google n8 screen problems or n8 purple screen problems you will come acroos many many pages of unhappy users from all across the globe
    i just hope nokia sort this out soon
    ho do you users with the problem feel about this issue and how do you think nokia should resolve it
    id be happy for a screen swap at a nsc or via warranty postal repair as long as it could be done quickly and the user wasnt without their phone for too long after all this is nokias mistake and not the users that bought the phone so all fixes should be at minimal disturbance to them
    heres hoping when you test the image your not as unlucky as me and many other n8 owners from across the globe , its a brilliant phone but this screen issue lets it down alot especially during watching films and stuff

    sorry to hear you guys are having troubles too , its a shame sucha  great device as the nokia n8 has had an issue like this arise , it is effecting alot of n8/c7 handsets and is quite a widespread issue across the globe
    it would be great to hear from as many users as possible about this and what they think about it as a user of the c7/n8
    jimmyireland about your post mate
    yes it was written by me and yes it ws deleted not once but 3or4 times actually
    the mods said it was because i had set up a poll and voting system , so i read through forum rules and posted it again with what fitted their guidelines and even put in big caps that it was not a poll but a thread to help users identify a problem and discuss it which is what the forum is for , it was deleted again , i then posted it again with just the test image and how to spot the problem and again put big caps that the post fitted their guidelines and was just to help users , it was again deleted and i was banned by mods for 2 days saying that i had broke forum rules and posted a poll and that the test image wasnt a proper test image
    i then asked other users to post the image but when they tryed nokias spam filter kicked in with a message saying that their post contained spam and that they should write it again and try posting again
    to be honest it really looked like they were trying to cover up the issue , fair enough my 1st post could be considered a very very rough poll but the posts i made afterwards were edited to fit nokias guidelines and they still removed them ad banned me and then other users posts were marked as spam
    so i tweeted alot of people and even nokia have said that as long as the post doesnt contain polls/votes then it will be fine to postand that mods shouldnt delete it , which was excellent news and hopefull this thread will stay and users can load the image and test their screens and then discuss the issue here so nokia can see users discussion in one thread , it will alo help awareness of the issue
    hence this post that isnt a poll but a thread to help users identify wether their n8/c7 has a screen with a defect in the gradiation of colours
    as stated in original post not all n8s have this problem my gfriends doesnt and it displays the test image perfectly on all brightness settings , yet my n8s show the image as very purple on low brightness and the brighter the screen goes the less the purple is shown , it is still there just not as visible as it is in the lower brightness settings
    as i also mentioned many n8s between october and mid december are fine although some still have the problem , yet from mid december till current date the amount of n8s with purple issue is much much higher and it now seems very very rare that you will get a brand new n8 from the shops without this screen issue which leads me to believe that from launch nokia have used at least two screens in the builds of the n8 , some great screens and then the ones with dodgy purple tint , from the threads across the web it seems like the good screens nokia were using either run out or they have failed to source the same screen or the manufactuer of the screen has changed something
    iam not a nokia hater and iam not here to cause trouble or loose nokia sales etc
    i love nokia have used them for years and used symbian since the 6680 , iam always helping users across the web with their nokia problems and am an avid user on nokia users please check my profile and feel free to check my posts and how many times ive been thanked for being helpfull
    http://www.nokiausers.net/forum/members/buxz777.html
    as you can see i love nokia and spend alot of time using their devices , speaking highly of them and helping their users with problems, i also love good customer services and customer relations
    i understand that big companys have build issues iam a gadget lover and trained in ict supprt iam not silly and understand that these things happend and building these phones with such complicated electronics and some could end up with issues , it could happend to anyone , sony , apple , samsung , blackberry , lg etc etc
    however its how the companys react to these issues and relate to their customers that have spent 100s of pounds on their devices that is important , issues do arise , its how the company looks after its customers thats important
    i think alot of users think the same , they dont expect nokia to click their fingers and go heres a fix but they do expect nokia to investigate the issue and they do expect nokia to relate to its customers and not ignore them or the issue which is what it looks like when posts are deleted and users are banned for posting informative posts that help users identify a problem
    things like sending users really bad refurbs for brand new n8s also dont help users confidence in nokia statement of going to nokia care about the problem as all i got was second hand looking n8s that still have the problem they were sent off with and the originals were in much better condition
    like i say iam not here to cause trouble and i love nokia the n8 is the best phone ive ever had and its almost my dream device and everything ive wanted on a device for years its the ultimate convergance device and agadget lovers dream , however when you see your gfriends and some of your mates n8 screens display the test image perfect then your n8 display it with a very purple hue it does dissapoint you and you do hope that nokia will take notice and fix the issue with the least amunt of hassle to the users
    cheers jimmy and sorry about the long post just wanted to clear some things up
    now lets get back to discussing the issue and what other users think about it
    have a great evening

  • The Windows 7 Black Screen Issue

    I am putting in Bootcamp with a Windows 7 install. I checked these forums and made sure I had all my prep work done.
    I referenced article TS3173 and downloaded the neccessary drivers for 7, formatted a 16GB SD Card as FAT Bootable and copied the drivers and autounattend.xml files onto the root of the drive.
    THe installation as going as planned but at the end I'm still ending up with a black screen. Windows is installed ok but on the restart after" Preparing for FIrst Use" comes up the screen goes black.
    Obviously, the drivers are not being installed from the SD card, I tried it on a USB External driver as well. Am I missing something here? I read every post I could find on it and I can't see where I am doing anything incorrectly.
    Thanks
    Tom

    You don't need Paragon or another NTFS driver. That may work (I've used it, but I was using a full hard drive anyway to begin with).
    Apple's method:
    http://www.apple.com/support/bootcamp/
    *My iMac (27-inch, Late 2009) displays a black screen during installation of Microsoft Windows 7 using the Boot Camp Assistant. How do I fix it?*
    The Windows 7 installer does not include required graphics or Bluetooth drivers for this computer. To obtain the necessary drivers and resolve the issue, see this article (creating the SD card and drivers for the "black screen" issue).
    http://support.apple.com/kb/HT3986
    http://support.apple.com/kb/TS3173

  • Gray screen issue still in Reader 11.0.03

    Hi, it sounds like the PDF gray screen issue mentioned here:  http://helpx.adobe.com/acrobat/kb/pdf-opens-grey-screen-browser.html
    has been fixed in 10.1.3.  Has it been fixed in 11.0.03?  I have the latest Xi version installed and am still experiencing this problem.

    Hi, C F McBlob,
    Thanks for the help and the suggestion.  I turned on Compatibility View in IE and I still see the gray screen.  The ActiveX control should take the same setting that I've set in the browser, right?
    Also, shouldn't it be an Adobe issue rather than an IE issue if the exact same setup works with Adobe 9?

  • How to automate the WM/shipping process after the consignment issue ?

    I am looking for the best way to automate the shipping process after the consignment issue orders has been created. since Warehouse/shipping process will not consist of any actual picking and shipment but we are still required to go through the use of Vl01N and VL02N for Delivery Note and Good issue... steps......I want to know if there is any best practice is to automate the call to VL01N,VLO2N for all the completed consignment issue orders that SAP suggest or someone has done some work in this space.....and can share their views.....
    one situation to explain the needs....
    Create the consignment issue orders via EDI....and once they are there ...we need a automatic process to find these order and create the delivery note , goods issue documents.........looking forward to hear from experts who can inform  if there is a standard SAP process( automatic)  out there or we need to do some custom development....to achieve this....thanks.....

    Thanks for the insight....we are thinking to have a new custom table added which will have all the order that needs to batch processed and if we have any errors we can re process them from the control table ( new custom table)...please let us knwo if there is any other way to do this....or sap already has some tables....whihc we can use...to automate....as a batch process.....

  • GE40 2OC Dragon Eyes - Screen Issues

    Hello,
    My notebook have screen issues, it goes black in some situations. Sometimes, when I turn on the notebook, the screen is already black and I cannot see anything, then I have to turn it off (pressing power button). It also goes black when I close notebook lid and reopen it (I have set up so that closing the lid does not do anything to the notebook). Also, minimizing or closing some fullscreen games like Skyrim or Resident Evil 6 makes the screen go black. When it goes black I turn notebook off. Please help :(.

    Quote from: gtsgts;113598
    He only reconnected the cable. So, it is better to replace it with a new one, right?
    I can see the desktop when connected to HDMI, the notebook works normally, except the built in display.
    Ok, I will update BIOS and report here =D
    That issue of yours does not sem to be BIOS related problem at all so you would mostlikely have same problem after bios update, so best is to send it to repair where they will re-place the screen cable completely some times they get worn out and begins to glitch.

  • My notebook laptop start beeping after hp screen when i turn on my laptop.....

    1. product name and number--- hp pavilion dv7-1260us notebook entertainment pc
    2.operating system installed--- windows 7 64-bit
    3.error message--- when i turn on my laptop it starts beep sound continuously after hp screen and touch pad also not working properly cursor continuously goes down automatically....
    4. i jus installed windows updates.....

    Hiya,
    Is the beep sound happen while loading Windows? Is it coming from the speakers?
    Have you tried your cursor in the Recovery Manager to see if it's a software issue? When the BIOS HP logo is on the screen press F11 to load recovery manager. If mouse works normally then you have a software issue, if issue still percists it is most likely hardware based.
    I am an HP employee.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Maybe you are looking for