[Suggestion] Need to bold SOME characters in Remark field

Dear SAP,
Our customer has a suggestion of Remarks / Comments field. Sometimes our clients key-in a lot of comments in that field. They want to highlight / bold some important piece. Currently SAP has no such function. I am not too sure if there really is a way to develop it. Per our clent's request, I log this suggestion and see if this can be a helpful suggestion.
Thanks in advance.
Regards,
Yuka

Hi...
I would try this out:
l_body:='<html>
<b>Dear</b>|| whatever_it_is
</html>
-- here is a mailing. please note that I put body into p_body_html
BEGIN
wwv_flow_api.set_security_group_id; -- this row need if you call apex_mail from Oracle procedure. If your code in APEX's process - toss this row out
l_id := APEX_MAIL.SEND(
p_to => l_to,
p_from => l_from,
p_subj => l_subj,
p_body => l_body, -- or you can skip p_body at all
p_body_html => ll_body
apex_mail.push_queue;
COMMIT;
END;
Good luck.

Similar Messages

  • I need to check comparative three conditions and for each output I need to perform some action. can anybody please suggest

    I need to check three comparative conditions and for each status I need to perform some action. can anybody please suggest
    Requirment:
    Need to check if a numeric value is within a number range by using comparative function. Depending on status i need to ggive a constant input to numeric function.

    Easiest is suing an array of range boundaries, e.g. as follows:
    (Found here)
    Now it is fully scalable and  independent of the number of ranges. The solution in the earlier post would get complicated quickly whenever the number of ranges or boundary locations changes.
    LabVIEW Champion . Do more with less code and in less time .

  • HT4061 I need to download some data from my phone prior to restoring it to the last backup. When connecting to itunes to download photo's it is suggesting I restore the phone. Is there a workaround?

    Hi,
    I need to download some data from my iphone prior to backing it up. When connecting to itunes it is suggesting I restore it now. I will lose quite an amount of data if I cannot find a workaround. Is there any way to get access to contacts, notes and photo's before I restore the phone?
    Phone details are: model: A1429
    FCC:       ID   BCG-E2599A
    IC            579C-E261DA
    IMEI:      013412004666230
    Cheers

    Thanks for the update. I went through the restore process and all the data I thought I would lose was there. The data must have been copied straight away before the update failed over.
    Cheers
    John.

  • Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly.

    I am currently using Adobe Reader version 9.1.3. When I open certain files, it displays the following message, "Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly". Some fonts are actually missing and will not display when printing. I have tried updating adobe but the problem still persists. Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
    Cheers
    RK

    RK7.10.09 wrote:
    Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
    Cheers
    RK
    BUT, does it say "embedded" or "embedded subset" next to the font name. If not, the font isn't included in the file and if you don't have it, it can't display or print it.
    The file creator will need to embed the fonts properly although "some" fonts don't allow embedding. This could be one of them.

  • Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print corr

    I have been getting the error....
    Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print correctly.
    I have tried to look online to figure this out but I have had no luck.  If anyone has any suggestions to fix this I would love to hear them.  Thanks!

    Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
    The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
    I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
    Here are the sections I deleted:
    Library/caches/metadata/Microsoft*
    Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
    I did leave the entourage settings though.
    hope it helps someone with a similar issue.

  • TS2755 My friend sends me photos from his iPad 2 via email. However, when he come to my iPad 2 inbox, the photos do not show up. Instead I get 20-some characters. What is wrong? Please advise.

    My friend sends me photos from his iPad 2 via email. However, when they arrive in my inbox on my iPad 2, the photos do not show up. I receive 20-some characters. Please advise as to the problem.

    Try sending them via the Messages app as opposed to E-mail.
    E-mail shouldn't normally be a problem, but Messages will do as a soloution.
    To do so:
    . You need iOS 5
    1. Go to your Photo Gallery
    2. Open up the album/ images you want to send
    3. Press the share button (top right hand corner)
    4. Select 'Send as Message' (not e- mail)
    5. Select your friends Apple ID from your address book for his iPad
    6. Voila!
    - it's something along those lines...... my iPad is downstairs atm, but the actual way of doing it will be similar...... !

  • For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

    For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

    If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
    If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847.  It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email. 
    The other area to look at is your text messages.  These are included in the backup.  If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup.  If that's the case, deleting these may make a big difference.

  • Cannot extract the embedded font 'F2'. Some characters may not display or print correctly.

    This question was previously published but no answer has been found.
    Error message is :
    "Cannot extract the embedded font 'F2'. Some characters may not display or print correctly."
    Many pdf documents display this error with Adobe Reader 8.1.0. We have errors for embedded fonts 'F0','F3','F7' and so on.
    It looks like a Adobe Reader bug because :
    - All PDF files can be opened with Acrobat Reader 5.0.5, 6.x and 7.x, can't be opened with 8.1.0 version.
    - the 8.1.1 update removes only the bug for 'F0' error message (issue #1572280).
    The solution :
    - to publish a 8.1.2 update to fix this important bug
    - is there a registry parameter or tool option to disable the checking added in 8.x version of Adobe Reader ? The 8.x version catches more errors to be compliant with Adobe specification but Adobe reader must be
    compliant with all documents generated by third party products.
    This Adobe Reader bug applies to Windows Vista, XP Pro SP2, 2000.
    Thx,
    Regards

    Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
    The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
    I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
    Here are the sections I deleted:
    Library/caches/metadata/Microsoft*
    Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
    I did leave the entourage settings though.
    hope it helps someone with a similar issue.

  • Not printing some characters

    hi folks! (sorry for my english)
    I'm using Adobe Reader in Ubuntu 8.04, but i'm having some problems...
    I have a PDF whit various fields where i can write (i.e, if i write in field1, field2 will contain the same text). All is OK, but when i print the document some characters (5, 6, 7, 9, Á, É, Ú, w and many others) not print... what can i do? I have installed the following versions (all with the same problem): 9.1, 8.1.4 and 7.0...
    thank you!
    ps: in Windows i can print the document whitout this problems... (but i need and want use Ubuntu )

    Hi RishiOberoi10,
    Printer: Infotec 2525
    PPD: I'm using the PPD from openprinting database (the recommended one).
    I'm sorry, but i'm not able to post the document at the moment, because is a private document property of the company where i work.
    Regards,
    edortix

  • Some characters gain extra lines or are broken when printing to PDF

    I am having a problem with some characters rendering oddly when I print to PDF.
    Examples are an extra vertical line next to an upright character, and extra partial curve to the left of an opening parenthesis, or a slight cut-off of a curve in a character.  All of these seem to be in the vertical plane.  It is not consistently tied to particular character combinations - the same word may render correctly in one instance, but incorrectly in another.
    I am using Microsoft Word 2007, and printing to PDF via Adobe PDF Converter (CS4).  The font is Gill Sans MT Light, and the document is 230 pages.
    Can anyone seen anything similar before, or can someone suggest anything I can look into further?

    You may have to turn on "display large images" in the preferences.

  • NSMutableString getCString misbehaves, does not show some characters

    Hi everyone,
    This is my first time here.
    I have written a small tool for Cocoa / MacOSX 10.5 and I am trying to save a text to a file, but some characters such as # appear as hex 0x0.
    Source: -----
    int len = [results length] * sizeof(char);
    char *buffer = malloc(len);
    [results getCString: buffer maxLength: len-1 encoding: NSWindowsCP1250StringEncoding];
    NSData *dt = [NSData dataWithBytes: buffer length: len];
    [fileManager createFileAtPath: @"/Volumes/MacBackup/results.sh" contents: dt attributes:nil];
    The # and the final 2-3 characters appear as 0x0 in a hex viewer. I have tried almost all encodings, but to no avail. Can anyone tell me how to make it work? Do I have to enter the # directly in the char buffer as ASCII char or am I missing something about the encoder?
    Btw, I am a newb at Mac programming, but I come from a solid Windows programming background, but please don't hold that against me :P.
    Message was edited by: TTDeath
    Message was edited by: TTDeath

    Hi TT, and welcome to the Dev Forum!
    TTDeath wrote:
    I have written a small tool for Cocoa / MacOSX 10.5 and I am trying to save a text to a file, but some characters such as # appear as hex 0x0.
    int len = [results length] * sizeof(char); // <-- need to add one here
    char *buffer = malloc(len);
    The NSString length method doesn't count a terminator; i.e. it's analogous to strlen(), so if you convert an ASCII C string to a NSString object, the return from [results length] will be the same as strlen(source). I'm not sure there wasn't something else going on at your end, since this length error only strips the trailing char from the source string. In any case, the following code should work for you:
    // made from MAC OS X->Command Line Utility->Foundation Tool template
    #import <Foundation/Foundation.h>
    int main (int argc, const char * argv[]) {
    NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
    // insert code here...
    NSLog(@"Hello, World!");
    NSString *results = @"A string with # embedded
    int len = [results length] * sizeof(char) + 1; // <--
    char *buffer = malloc(len);
    BOOL bError = [results getCString: buffer
    maxLength: len encoding: NSWindowsCP1250StringEncoding];
    NSLog(@"getCString returns %d", bError);
    NSData *dt = [NSData dataWithBytes: buffer length: len];
    NSLog(@"dt=%@", dt);
    NSFileManager *fileManager = [NSFileManager defaultManager];
    // I don't recommend testing in a system directory -
    // remember to substitute your home dir name here:
    bError = [fileManager createFileAtPath: @"/Users/Ray/results.sh"
    contents: dt attributes:nil];
    NSLog(@"createFileAtPath returns %d", bError);
    [pool drain];
    return 0;
    // [Session started at 2009-12-05 16:47:41 -0800.]
    // 2009-12-05 16:47:41.045 TT[463:10b] Hello, World!
    // 2009-12-05 16:47:41.048 TT[463:10b] getCString returns 1
    // 2009-12-05 16:47:41.049 TT[463:10b] dt=<41207374 72696e67
    // 20776974 68202320 656d6265 64646564 0a00>
    // 2009-12-05 16:47:41.054 TT[463:10b] createFileAtPath returns 1
    // rays-imac:~ Ray$ cat results.sh
    // A string with # embedded
    - Ray

  • UDF to truncate some characters in the source field

    Hi all,
      My source field is 18 characters , the target field is 15 characters.Si i need to drop the 3rd, 4th and 5th character from the source file.Can any body help me with the UDF to be written during the mapping

    Hi Priya,
    UDF is not required. Do The Mapping as suggested by RAJA..
    Do It Like This
    Input ------> subString(0,2) -----\
                                       -------->Concat[]----->output
    input ------->subString(5,13)-----/
    Regards
    Jyothi A

  • Some characters could not be mapped using ISO-88559-1

    I'm creating a Flash/Flex app which will load multilingual xml for all the text displayed. I tried using this example:
    http://www.adobe.com/devnet/flash/articles/filtering_data_e4x_02.html
    but got an error
    "...some characters could not be mapped using ISO-88559-1..."
    when I pasted the example xml into Flex and tried to save it. I've searched for another tutorial on creating multilingual content and using it in xml. The plan is to contract the translations to be delivered in xml. Any suggestions?

    Yvonne-
    You can have many libraries with many albums and files within them. Each library is independent, so if you upload a file to two libraries then you two copies. If you put a photo from a library in albums that live within that library, then there is only one copy in the library that each album has access to so it will show up when you view the album. This might help : http://forums.adobe.com/message/5197228#5197228.
    I found a few incomplete files in your account also. We will take care of this for you and contact you when it is complete.
    Pattie
    Some of these links might also be useful to you:
    Revel FAQ’s:
    http://forums.adobe.com/community/revel/faq
    especially:
    FAQ: Where can I learn tips and tricks about Revel? http://forums.adobe.com/message/5798092#5798092
    FAQ: How do I share my photos in Revel? http://forums.adobe.com/thread/1295026
    FAQ: How do I add (upload) files to revel? http://forums.adobe.com/thread/1162795?tstart=0

  • The font 'Didot' contains an invalid encoding. Some characters may not display.

    I am receiving this message:
    "The font 'Didot' contains an invalid encoding. Some characters may not display."
    The message appears only in one form, not others. It appears only once, the first time I click on the form after opening it, then not again until I reopen the form.
    The font is not embedded in the form and does not exist on my computer. The font is not employed in any field in the form or in its static elements.
    Would appreciate any help in getting rid of this very annoying message.

    KKKRRRGGG wrote:
    I have a 2 page PDF form that is getting this error message every time I open the document.
    "The font "HelveticaNeue" contains an invalid encoding. Some characters may not display."
    The document has been in use for a year (never having this error message) and needed some updates. All that was changed was the addition of some extra fields and some options in one java script to reflect extra addresses in a drop down menu.
    HelveticaNeue was in a PDF layout (from Illustrator) for the background but this variable was removed when I converted all fonts to curves (outlines) and replaced it in to my form. Under Properties>Fonts HelveticaNeue isn't even listed. All fields are Myriad Pro (triple checked) so I cannot understand how it is still an issue. It does not seem to have any impact on the document apart from the error message. It is hard to remove when it does not appear anywhere in the document except for the error message.
    I have worked backwards and deleted all java scripts and it is still an issue. I have re-imported the background with active HelveticaNeue fonts and it is still an issue. Deleted any fields that relate to java scripts and it is still an issue. Tearing the hair out.....
    Any help would be hugely appreciated as I would prefer to not have to start again from scratch.
    Run FontBook and verify the Font. If defective open your System Install CD  open Fonts. Drag this font to Desktop.
    If you can Remove the defective font by draging to Trash (if system font you'll have to give username and Password) .
    Then drag the copy on Finder in same folder dective was removed from
    THen Restart Computer with shift key down. Hold down until a screen comes up where you must sign in. wait until screen fully loads. Now try the PDF.  If works shut down Acrobat (or Reader) and the restart computer normally.
    If this doesn't work do the repair located at: http://support.apple.com/kb/DL1377

  • Error Message:"Cannot find or create the font 'WP-MathA'. Some characters may not display or print correctly."  Who can help me solve this problem?

    Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.”  Who can help me solve this problem?
    Thank you in advance for  your time.
    Marlen

    Hello Anubha,
    I am having a similar problem on my machine.  I was using Word 2008 and I created a PDF inside Word.
    I am opening the file on the system itself and I am running Windows 8.1.  I am using Version 11 of Reader.
    When the PDF I created (my resume) attempts to open, it says:  cannot find or create the file Times, Bold.  Some characters may not display or print correctly. 
    However, the entire Reader keeps freezing and will not allow me to open or test print the document.  Also, it is not displaying any of the Bold Times New Roman Print.  Can you please help?  Thanks.

Maybe you are looking for