Suggestions for 'cpanel' type management system for OEL?

I am probably going to get shot to bits on here for asking about this - but I am interested to know if anyone has tested / used any 'panel' type systems on OEL.
For large multi customer hosting operations, where you sometimes want to give the customer partial control of the server (basic tasks such as restarting services, adding websites, etc) it's not always possible to simply give them a shell and tell them to get on with it - that usually causes more problems!
So. Management panel for OEL?
Anyone?
Jeff

For administrators, http://www.webmin.com is popular. Not only can you remote admin the box, you can add custom buttons to run applications or your own scripts.

Similar Messages

Requirement on managed system

Hi All,
We have installed Solution Manager Ehp1. We are unable to find the prerequisites for the satellite system after following many notes mentioned below i am confused .
I have followed these notes (Note u2013 1010428, 1274287, 1228898,539977,69455).
Following scenarios should be performed on your SAP Solution Manager with the Managed Systems
Setup of WorkCenter and Downtime Manager along with Downport , Root Cause Analysis/ SMD
Can you suggest patch requirement on managed System ?
ST-PI,ST-A/PI, SAP Basis, SAP ABAP .
Clientu2019s Backend R/3 is on 6.20 SAP_BASIS SP60
We will appreciate your help
Thanks,
shashi

>
Shashi Prakash Singh wrote:
> We have installed Solution Manager Ehp1. We are unable to find the prerequisites for the satellite system after following many notes mentioned below i am confused .
> I have followed these notes (Note u2013 1010428, 1274287, 1228898,539977,69455).
>
> Following scenarios should be performed on your SAP Solution Manager with the Managed Systems
> Setup of WorkCenter and Downtime Manager along with Downport , Root Cause Analysis/ SMD
>
>
> Can you suggest patch requirement on managed System ?
> ST-PI,ST-A/PI, SAP Basis, SAP ABAP .
>
> Clientu2019s Backend R/3 is on 6.20 SAP_BASIS SP60
As a first answer:
[FAQ Diagnostics: Installation and Configuration - 10. Which limitations exist in terms of supporting lower releases on the managed system side?|http://service.sap.com/~sapdownload/011000358700000737542007E/#A54]
Implement latest available version of ST-PI and ST-A/PI.
Ruediger

Adobe Type Manager Light for 64-bit operating system?

Can anyone help me locate Adobe Type Manager Light for a 64-bit operating system? The downloadable version on Adobe's website appears to only be compatible with 32-bit systems. Or, is there another type manager program that will allow me to use Type 1 fonts on a 64-bit, Windows Vista system?

Several third party font management applications are fully compatible with 64-bit Vista and 64-bit Windows 7, including my own company's. That would be Extensis Suitcase Fusion 2.
http://www.extensis.com/en/products/suitcasefusion2/index.jsp
If you need ATM Light for multiple master font support, there are two key issues. First, ATM Light can run on 64-bit Windows, but won't install. Second, it is incompatible with User Account Control, a security feature in Vista. The following procedure has been reported to work on 64-bit Vista:
- install ATM Light on a 32-bit version of Windows
- turn off User Account Control on your 64-bit Vista computer (YES, this makes your computer less secure)
- copy the ATM directory over to the 64-bit Vista computer
Cheers,
T

Can I use my Office 365 for small business version of Sharepoint to develop a type of Business Database Management System?

We have an excel sheet that job enquiries are logged into, estimates and a quote are produced, upon receipt of an order a job is started and once completed gets invoiced. Standard business workflow stuff, can I get 365 to automate this?
I would like to be able to upon a new enquiry being entered and an order received, a set of job folders are automatically created using a unique number from the excel sheet as its job number. These folders would have certain document templates within
them for use on the related job.
I have been experimenting with Zoho Creator to develop a system to do this, but as we have adopted 365 (small business version) it would be preferable to be able to do this all in one place.
Any help or advice greatly appreciated.
Chris

Hi Chris,
As I understand, you would like to create a management system to create folders via number in Excel sheet.
In my view, we could import the Excel sheet to a list, then use workflow to get number and create folders.
Here is a forum specific for Office 365 SharePoint for your reference, please confirm the plan with support engineer there just in case:
http://community.office365.com/en-us/f/154.aspx
Regards,
Rebecca Tu
TechNet Community Support

I'm looking for a document management system

Hi there,
I'm looking for a way to organize, sort, and make searchable about 1200 Microsoft Word Documents. The way our company uses them is to search for individual documents, and also to group them to create customized packets that are used for training.
Once a group is created, I need a way to print easily. The other problem is that 60% of the documents are designed for learning so they have an instructors filled in part, and a learners blank part.
Question 1: Should I separate each document, make the instructor version a separate file? Today, it is one file, with page 1 for the instructor and page 2 for the learner (some docs have more than one page.
Question 2: Does anyone know of a web plugin or app that will take a collection of word documents, and automatically combine them into 1?
2 years ago, we created a php searchable system and uploaded all docs into it. It workds pretty well for organizing, searching, grouping, and adding comments about the docs... BUT when it comes time to print, it only downloads a folder filled with all the SEPARATE word files. They are numbered, but because they are not one doc, page numbering is a bear, and each doc has a instructor and learner page... for printing, the trainer needs to tell the office staff which page to print for each handout. the instructor copy or leaner copy. Once a master is made, we photocopy it. So the question: Is there an easier way to create 1 file with all the pages? Like convert to PDF or to a single MS Word document?
Any suggestions are welcome!
PS: while we are an all mac shop, we do have a dedicated webserver running linux that we could use.
PPS: I will have interns this summer, so if the solution involves converting all of our MS word docs into something else like pages, I'm all for it...

It sounds to me like DevonThink might just replace the php system that you already have.
One way to tackle this might be to look at automating the combining process, rather than changing the overall management system. Various thoughts:
If the docs were pdfs, a program like CombinePDFs would let you drag and drop all the files onto a screen, re-order them if necessary, and then hit Merge (actually, I think Preview would let you do this, in Leopard). That might help. However, I don't think it would put on page numbers.
I'm pretty sure Acrobat would let you combine the PDFs and add page numbers, or perhaps take the combined pdf file and just add page numbers to that. (Not sure if this might require Acrobat for Windows)
Alternatively, you could tweak the docs themselves so that they use a form of chapter numbering, eg: "PDF Introduction-1, PDF Introduction-2" and "PDF-Advanced-1, PDF-Advanced 2" and then not worry about the page numbers. I wouldn't exactly recommend this, as it's pretty useless to say "turn to page PDF-Intermediate 3" and have people find that page, but it's been done.
Since they are already Word docs, though, it might be best to stick with Word. Word 2008 has Automator and Applescript, and it should be possible to write an Automator or Applescript such you just drop the documents on an Automator app, and it combines them, adds or updates the page numbers, maybe creates a Table of Contents, and spits out an assembled document.
That said, I don't know how to do that. There is a Combine Word Documents automator action, certainly. You could try asking over in the Word forums:
http://www.officeformac.com/ProductForums/Word/
Or here's a macro that should work in Word 2004 (but not 2008)
http://www.gaebler.com/How-to-Combine-Multiple-Word-Documents-into-One-Document. htm
This will work best if all the docs are formatted consistently, based on the same template. If they are not consistently formatted, then the formatting will probably change when you combine them in Word, and that would be an argument for converting them to PDF before combining them. It should also be possible to create an Automator action that will convert all the docs in a folder to PDF.
I doubt there is going to be anyway to automate the instructor/learner copy--someone will have to do that manually, but it does suggest that if you create separate files for each one, it will be easier to do the search, download the found files from the resulting folder, and then manually just delete the learner file from the folder rather than having to open up the instructor file and delete part of it.
So, some potential experiments to try. Hope that helps.
Automator to convert the docs to PDF and then Acrobat to combine and number the pages might be your best bet.

Looking for a remote desktop management system

Hello,
I am looking for a remote desktop management system which should be very user-friendly. We would prefer a open-source software for that for further customization. I have found Paragent software which seems to be looking good so far, any suggestions regarding this would be appreciated.
Thanks in advance.
bmora96

How is this related to Java?
Edited by: wpafbuser1 on Feb 22, 2008 9:22 AM

Suggestions For A Reporting System

Hi,
I'm currently working a nefty Swing application and was looking for ideas as to how to develop a robust, extensible reporting system. I would appreciate any all suggestions to make the whole system work as efficiently as possible, with little difficulties when it comes to adding new reports and all.
Basically is here the structure I'm currently using:
1. I have an abstract class called ReportNode which has the following basic structure:
public abstract class ReportNode {
     * Returns a List of Person objects which will be used to create the Report. This is the only
     * required method needs to be implemented by the report node subclasses. All other methods can be
     * overridden as required.
     * @return the List of Person objects to use for the report
    public abstract List<MemberData> getNodeData();
     * Returns a TableModel with the data to be displayed
     * @return a TableModel with the data to be displayed
    public TableModel getNodeDataModel() {
        return new DefaultTableModel();
    // with several other methods which can be overriden and as necessary
}2. Each report is currently hard coded by extending the ReportNode object and overriding either one of the two methods stated to retrieve the required information which can then be displayed in a JTable, using a predefined TableModel (for the first method) or a the custom TableModel returned from the second.
Now I want to move the code out the hard coded format since the reports are growing and I would like suggestions or pointers on some best practices that can help me get the results I need. That is, suggestions as to
- what type of database structure can be set up that can make generating custom reports possible
- or perhaps I should go with Stored Procedures instead and come with some table design that can be used to pick the required variables for the procedures
- should I stick with the JTable reporting (works quite well for data presentation, but can be tricky when it comes to printing at times)
- or I should switch completely to some of the standard reporting systems like Jasper Reports (I tried it but found it a bit cumbersome for a beginner)
Any suggestions (however small) would be greatly appreciated.
ICE

MGE certainly has a decent track record. Search the net for reviews of Lieberts line as well.

I have Windows 7 and for some reason I cannot install Adobe Type Manager onto my Computer. I need ATM to install the DIN font but am having no luck what so ever. I can see the DIN font in my Dropbox but it is showing up like this:- ._DIN-bold, no file fi

I have Windows 7 and for some reason I cannot install Adobe Type Manager onto my Computer. I need ATM to install the DIN font but am having no luck what so ever. I can see the DIN font in my Dropbox but it is showing up like this:- ._DIN-bold, no file file extension. what am I doing wrong? is it Mac?

(1)    Adobe Type Manager (ATM) is not compatible with any version of Windows beyond Windows XP (32-bit, only). Attempting to install ATM on any newer version of Windows may actually disable Window's capability of rendering Type 1 and OpenType CFF fonts, requiring a reinstallation of Windows.
(2)    There is no need to use ATM to install any fonts under Windows.
(3)    The file name ._DIN-bold is indicative of a MacOS font. These fonts cannot be installed on Windows systems.
          - Dov

Document management system for loan Module

Is DMS (Document management system ) available for loans management?
We are entering loans in General loan. We want the documents related to
loans like agreement, Interest advices, etc to be uploaded in the SAP
and should be accessed in that particular loan itself. Is there any
system available to attach the documents uploaded (through cv01n) in
SAP to loan? Is standard object for loans is available for this purpose? Object is to
be maintained in Document types in DMS in configuration.
Please help.
Regards
Gaurav Gupta

I got the configuration

Database design (ERD )for Inventory Management System

Dear All,
I am going to develop a simple Inventory Management System software using C# .NET for my learning. After searching different forums, many people have suggested to first create a database design for the software. I want a database design, in short, an ERD
diagram for simple Inventory Management System which shows proper entities(tables), attributes and relationship between entities.
It would be highly helpful for me as I am newbie to C# and databases.
Thanks,
momersaleem

Dear Rebecca,
Thanks for you suggestions.
As I am going to develop IMS for learning purposes so I think I wouldn't need to go in detail regarding Customer name and addresses. However, I am still thinking of adding country attribute in customers' table which I think will be helpful to sort out customers.
What's the difference between a purchase and an order? They're usually the same thing, which doesn't mean you're
wrong, but what are you picturing here? Purchase entity will be used to keep record of purchases you made and an order entity will be used to keep record of orders that cutomers placed.
Pricing:
Any order system needs to manage two very distinct bits of data that are easy to confuse. The price in the Product entity is the current
price. The price in the Order entity is the selling
price. Not at all the same thing--current price is almost certainly going to change over time. Selling price won't.
Does it mean that I'll change the price attribute for product to current_price and add selling_price to order table which will help to keep record of price at the time of order?
Why did you include a quantity field in the Products table? Is it meant to represent stock on hand?
Yes you are right. It represents stock in hand.
Could you please recheck the entities relationships as I am not confirmed whether these are correct or not?
Thanks,
momersaleem

Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
Manish

Manish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G

Managed System Configuration Error for MDM 7.1 SP09

Greetings, Needed your expert advise. We are getting an error while configuring our MDM Servers (Version 7.1.08.196) in Solution Manager. As suggested in SAP Note 1798643 , I have manually filled the required details and transferred through sldreg.exe to SLD. Now when i try to perform Managed System Configuration, it is throwing the below error. The definition of Technical System '~MDM' is not correct: '~MDM': No Path found in Installed Technical System 'SID~MDM~'. I'm not sure how to manually update the Install Path for our MDM Servers. Since, the data to LMDB is automatically supplied, I might not be able to manually edit anything. Could you please advise if there is any step to solve this issue. Thanks, Haseeb Ahmed.

Dear ,
Haseeb,
I had the exact same problem with MDM managed system setup . I was on MDM 7.1 SP10.
1940337 - RCA template for Solution Manager 7.10 SP10
This note should resolve your problem. This note has the updated template for MDM.
It did for mine
Thanks
Amit

Requirements for a document management system

We are planning to implement a document management system Oracle Application Server. Here are the high-level requirements:
· High availability (24x7)
· 3000 users, worldwide, on WAN
· 600 GB of documents
· Workflow
· Alerts e-mailed on document adds/updated, for workflow
· Search of document titles, properties, keywords, content
· Daily backup of new/updated documents
In regards to Oracle Application Server (Portal), can someone provide me the following information:
1. What Oracle AS server architecture would we need to handle the above requirements?
2. What is the Oracle recommended method of scaling up our current Oracle Portal instance in regard to:
a. Capacity
b. Achieving 24x7 availability
3. When documents are stored via an Item upload in Oracle Portal, are they stored in the database or as the actual file?
Thanks a lot,
Lpatnaik

Lot of this features are already implemented in Oracle Portal, Collaboration Suit and Oracle Content Management SDK.
http://www.oracle.com/technology/documentation/collab.html
http://www.oracle.com/technology/documentation/cm_sdk_9042.html
Generally this products stores documents in database BLOB field.
I personally don't like this approach.
We developed a media library that stores the files in filessystem, but the metadata is in database. The database references to the file in filesystem with a BFile field
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements001.htm#i54873
The system is very fast so I think it was a good decision to store the media this way.
If you use this approach you have to create database and filessystem backup also.
Filessystem backup is much faster and there are several very good tools to make an incremental backup.
If you store media in a database you can use Oracle Media types:
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements001.htm#i121058
Message was edited by:
zsolt.lajosfalvi

Repository for Document Management System

Hi All,
I need to devleop a repository [ just like Document Management System ] for my existed application which is handling the documents.
If any user having access to the repository, opens the directory, he should not see any documents.
Please let me know, what are the technologies to be used etc., etc.,
Any suggestions or info will be appreciated.
Regards,
Raju

Raju31181 wrote:
If it is not possible with java, then could you let me know what are the other technologies which can help in resolving the problem.
The file system is controlled by the operating system. Thus if you want to manage permissions at that level then you must use the OS.
There are no "other" technologies for that. You can buy or find management applications which allow you to do the same thing that the OS does but via different user approach. Most will be specific to the OS because that allows the most features.

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

Suggestions for 'cpanel' type management system for OEL?

Similar Messages

Maybe you are looking for