SUMMARY AND DETAIL WORKSHEET

I have a report which lists all the invoices and totals for each supplier for a specified period.
What I want to do is have another sheet which just summarises the total for each supplier and not display the individual invoice details.
Or have just a sheet that displays the totals and the user can drill into the supplier/total for full invoice details etc.
Can anyone please suggest a way to be able to do this?
Thanks

Hi
If you don't have 10.1.2 then you cannot hyper link between worksheets. The only way to do what you want to do is make use of sub queries. The two queries would be two worksheets inside the same workbook.
Basically, you create the detail worksheet first. Then you make a second worksheet in the same workbook and create a new condition where the supplier is in the list of suppliers returned by the first worksheet.
You can do the same thing for the date range.
Be warned though that making use of sub queries is not very efficient and only works efficiently when the list of suppliers being returned by worksheet 1 is small.
I hope this helps
Best wishes
Michael

Similar Messages

Hoe top create summary and detail report using ABAP QUERY

Hi ,
Can any one suggest me how to create summary and detailed report using ABAP Quey.
Regards,
Raghu.

Hi,
Table Declaration
tables:mara,mast.
*Declaring the internal table
data: begin of itab_new occurs 0,
      matnr like mara-matnr,     "Material No
      ernam like mara-ernam,     "Material Created by
      mtart like mara-mtart,     "Material Type
      matkl like mara-matkl,     "Material Desc
      werks like mast-werks,     "Plant
      aenam like mast-aenam,     "BOM created
      stlal like mast-stlal,     "Alternative BOM
      end of itab_new.
select-options: p_matnr for mara-matnr.
CODE A : Retrieving the data from the database
     select f~matnr f~ernam f~mtart f~matkl m~werks m~aenam m~stlal
     into table itab_new
     from mara as f inner join mast as m
     on f~matnr = m~matnr
     where f~matnr in p_matnr.
CODE B : Retrieving the data from the database.
    SELECT FMATNR FERNAM FMTART FMATKL MWERKS MAENAM M~STLAL
    INTO TABLE ITAB_NEW
    FROM MARA AS F INNER JOIN MAST AS M
    ON FMATNR = MMATNR
    WHERE F~MATNR = P_MATNR.
    SORT ITAB_NEW BY ERNAM.
loop at itab_new.
write:/5 itab_new-matnr,itab_new-ernam,itab_new-mtart,itab_new-matkl,itab_new-werks,itab_new-aenam,itab_new-stlal.
endloop.
*TABLES: MARA , MAST.
*DATA:BEGIN OF ITAB_NEW OCCURS 0,
             MATNR LIKE MARA-MATNR,
             ERNAM LIKE MARA-ERNAM,
             MTART LIKE MARA-MTART,
             MATKL LIKE MARA-MATKL,
             END OF ITAB_NEW.
   SELECT MATNR ERNAM MTART MATKL
   INTO TABLE ITAB_NEW
   FROM MARA
   WHERE MTART = 'T'
   ORDER BY MATNR ERNAM MTART MATKL.
*DATA: BEGIN OF ITAB OCCURS 0,
     MATNR LIKE MARA-MATNR,
     END OF ITAB.
Thank U,
Jay....

Use different Layouts for Summary and Details in Drill down report

Hi All,
I have a 2 level drill down report in ALV.
The summary report has certain fields and the Detail report has different fields. Now my problem is that when i use a default layout (with all fields of summary report) for the summary report, and drill down to the detail report i'm missing the fields on detail that are not in Summary. And if i save the default layout as default (with all fields of Detail) and go back to sumary, I'm missing the some other fields on summary (which are not on detail report).
Is there a way to make different default layouts for each of those summary and detail reports:
Also as the layouts are choosen by the user, i cannot hardcode any particular layout;
So if the user chooses a layout for detail; it has to stay the same layout for the detail report if he goes to summary and then back to detail; unless the user changes the layout again.
I'm using two different Layout types for each report. but i still cannot get the desired effect.
Data:
 gt_layout_s type slis_layout_alv,
 gt_layout_d type slis_layout_alv,
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_s
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_summary.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_d
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_detail_disp.

Here is how you differentiate between the layout of two different grids. There is the parameter, IS_VARIANT in the function. You usually leave it empty or pass only the report name and username. What you need to do is to pass unique string for each grids to the HANDLE field of the parameter IS_VARIANT. You can probably hard code it as HEADER and DETAILS in your case. Once that is done, system identified that these two different layout for different grids.
Regards,
Ravi
Note : Please mark all the helpful answers

Summary and Detail Fact Tables in one Universe ...

We have a classic star Schema with a snapshot( summary table by month) and a detail activity table on Daily activity. What is best way to design a Universe to accomodate this requirement.
1. Seperate Universe for summary Table
This removes the functionality of Drill down, and Drill down can be only available through links in Webi Reports.
2. One Universe for both Summary and Fact, and write logic for aggregate awareness. It will complicate the universe since we have close to 100 odd mesasures.
Thanks

Hi Devendra,
Use aggregate awareness irrespective of the "complicated" matter.

Missmatch APs count between summary and detail

Dear All,
I have a problem on APs count, on WLC (access point summary) I have 83 APs on a/n radio but when I go to detail...there are only 44 a/n radio access point as shown in picture below
what i must to do to make it match?
thanks and regards
Taufan

That is odd.
After sometime it is still showing same mismatch?
Rating useful replies is more useful than saying "Thank you"

Can Discoverer drill down include summary and details?

Let's say I have a set of bonds in different accounts.
Each bond has an account, product_type, rating_group and book_value.
I show an initial report with account and sum(book_value).
then I want to "Drill to related" to see the sum of book value by rating group.
When I do this, I no longer have the total book value for the whole account. I just have it for each rating group within the account. I want to be able to still see the sum of the book value for all rating groups and also see how it's broken out by rating group.
For example:
I start with this:
Account | Book Value
C-BASS | $1M
Then I drill to related -> "Rating Group" and it looks like this:
Account | Rating Group | Book Value
C-BASS | AAA | $0.5M
C-BASS | AA | $0.25M
C-BASS | A | $0.25M
I want it to look like this (or something like this):
Account | Rating Group | Book Value
C-BASS | All | $1M
C-BASS | AAA | $0.5M
C-BASS | AA | $0.25M
C-BASS | A | $0.25M

Hi the patch I applied was 5672969

Summary and the Detail Report

Hi All,
I want to create a summary and detail report in two different layouts on one single report,based the input summary or the detail report shoud execute...,how to do the same.
Thanks in advance
C.Somasundaram

Hi,
bring your two different layouts in seperate frames and write format triggers on this frames to show or suppress them (depending on your input). Connect the two frames with an collabsing anchor.
Regards
Rainer

E-Mail Summary Report and Detailed Report Automatically

Hi, I have just started a new job (1st IT job since leaving college) and I've been told that our Small Business Server 2011 used to email a Summary Report directly to a specified email address, as well as a weekly Detailed Report to the same email address,
but that has stopped sending reports now. How do i make sure that the reports are automatically generated and sent out via email to the specified address. Any help would be great.

Hi,
Based on your description, I understand that there some issue occurred in Report feature in the SBS 2011.
On current situation, please refer to following steps and troubleshoot this issue. Then check if can help you.
1. Login the SBS server. Please open Windows SBS Console and select
Reports tab. In the Reports panel, select a report (Summary or Detailed), then View report properties. In Report Properties page, please select
E-Mail Options to check if had added the correct user account or e-mail address. Also please select Schedule tab, and check if had configured correctly.
2. Then manually click
Generate report option in Tasks. Please check if successfully generated the report. If not, please refer to following TechNet article and repair Monitoring and Reporting features in the SBS server. Then monitor the result.
Repair Monitoring and Reporting Features
in Windows Small Business Server 2011 Standard
3. If generated the report successfully, please manually click
Generate report and e-mail report option in Tasks. Then check if run successfully. Or any error message occurred?
4. If this issue still exists, please refer to following path: C:\Program Files\Windows Small Business Server\Logs\MonitoringServiceLogs and check if there has some log files
which be related to Report (Summary or Detailed). If has, please check if can find some more clues. Meanwhile, please open Event Viewer and check if find some relevant errors. Those may hope us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Ospf no summary and default information originate

Hi all,
I have very simple question and I would like to have your opinion.
I can inject default route in to a nssa area in two way
- no-summary (to be used in to the NSSA ABR or NSSA ASBR)
-default-information originate (To be used in to the NSSA ABR)
Doubts (alle the below query are referred to a nssa area)
- Case no-summary: what will happen if the nssa abr does not have a default route?
-Case default-information originate: what will happen if the nssa abr does not have a default route?
- When do I have to use no-summary and when default information originate?
-What is the benefit to use the following command area xx nssa no-summary default information originate?
Thanks!!

Hi,
have a look at this document:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094a88.shtml#defaultnssa
- no-summary (to be used in to the NSSA ABR or NSSA ASBR)-default-information originate (To be used in to the NSSA ABR or NSSA ASBR)
- Case no-summary: what will happen if the nssa abr does not have a default route?
A (summary) default-route will be injected by the NSSABR; the backbone area is supposed to have detailed routing information.
-Case default-information originate: what will happen if the nssa abr does not have a default route?
A default-route will be injected by the NSSABR; the backbone area is supposed to have detailed routing information.
- When do I have to use no-summary and when default information originate? -What is the benefit to use the following command area xx nssa no-summary default information originate?
The no-summary option defines a NSSA totally stub; the NSSABR doesn't translate Backbone Area's LSAs (more precisely: their corresponding routing-table entries) into NSSA summary-LSAs, instead it injects a (summary) default route. If you want the NSSABR to do the summary-translation and also inject a default-route, you can use the default-information-originate option. A NSSABR the will inject a type-7 LSA for the default-route, which is not translated to type-5. This option can also be used on a NSSA ASBR, but in this case a non-OSPF default-route is required and a type-5 translation is possible.
[EDIT] :
Perhaps this discussion is also helpful to understand some of the design aspects of different area types:
https://supportforums.cisco.com/message/3977926#3977926
HTH
Rolf

Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount 28

Post Author: tadj188#
CA Forum: Formula
Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
Background:
1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using subreports.    A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report    with their respective detail lines). I had multiple subreports and each subreport became one union.
Created and tested, already:
1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
Issue:
1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
Other Ideas Appreciated:
1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
Thank you.
Tadj

export all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
    app.select(myImage[i]);
    var MyImageNmae = myImage[i].itemLink.name;
    app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
    app.jpegExportPreferences.exportResolution = 300;
       app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
    alert(myImage[i].itemLink.name)

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually.

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!

Have you tried deleting the songs from Settings?
Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.

The photos on my Picasa web album display as less sharp and detailed than the original photo or as displayed on Internet Explorer. Is there a work around?

Below is a link to one of my photos, if I toggle between this link on Firefox 3.6.9 and Internet Explorer I see a loss of clarity and detail on the Firefox browser. Look especially at the flower stamens to see this. 
all the photos in this album have the problem. 
http://picasaweb.google.com/RichardLeeBledsoe/InsectsOnFlowersByRichardBledsoe#5394520929339045794

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

Master and detail in the same page

db11xe , apex 4.0 , firefox 24 ,
hi all ,
i am trying to insert the master and detail data in one step in the same page :
i have two tables (clients) and (tests_administered)
the client table's region contains theses items
client_id
client_name
the other table's region contains these columns -- the tabular region
row selector
test_admin_id -- pk, hidden
client_id -- hidden , this is the one i should populate with values
and more columns
i've done this :
1- removed the condition of the tabular region .
2- Added the request CREATE to the list in condition of the APPLYMRU process -- or :request like ('CREATE')
3- Added new process with following code : -- with sequence before the applymru process and after process row of clients process
for i in 1..apex_application.g_f02.count
loop
apex_application.g_f02(i) := :p2_client_id ;
end loop ;
but nothing happened . why ? what did i miss ?
thanks

Hi,
Create a Master Detail Form through the APEX Wizard
Make sure you choose the Primary Keys for the Master Detail as one of your Column and not the ROW ID.
Selecting an existing Sequence for the Primary Key is preferred.
Select the option the where your Master and Detail appears in the same page.
Initially when you run the page your master and detail will not appear at the same time in the page when your Master Detail Form is in the entry form mode. For this you have to go to your Tabular Form(Detail Form) region, and below you will have to remove the Condition for the display of your Tabular form and set it to “No Condition”.
Now when you run the page both the Master and Detail form will appear together in the create mode but you will not be able to insert or create both master and detail records at the same time when u click the create button. For this the following needs to be done: You need to create a PL SQL Tabular Form process :
Let's say your master form is based on DEPT and your detail tabular form is based on EMP. Make sure the following things are configured:
The DEPT insert/update DML process runs before the new tabular form PLSQL process. (ie) the new PL SQL Tabular Form Process that you create should be inbetween Automatic Row Processing(DML) and Multi Row Update Process , so create the new Tabular Form Pl SQL process with a sequence number inbetween these two Processes.
Make sure you choose Tabular form while creating this PL SQL process.
The new tabular form PL/SQL process executes the following as the source
:DEPTNO := :P1_DEPTNO;
Where DEPTNO is the Foreign Key column in the Tabular Form that links the Primary Key Item P1_DEPTNO of the Master Form.
Finally this new PL SQL process conditionally runs when DEPTNO is null, so you need to add the following condition to the process:
The final step to accomplish in creating both the Master and Detail records at the same time is to make a change in the condition of the Multi Row Update Process. :request in ('SAVE','CREATE') or :request like 'GET_NEXT%' or :request like 'GET_PREV%'
-We make this change so that records get inserted into the Detail table when we click the ‘’Create” button.
Now you can Run your page and create both the Master and Detail records at the same time.
Thanks and Regards,
Madonna

Keeping heading and detail on the same page

Hi, I have a report with a group header section and a detail section. How can I keep the heading section and all the detail section on the same page without starting each group on a new page?
The detail section will have either 2 or 3 records with some of the objects set to grow if the data doesn't fit on one line. This results in several changes of group appearing on the same page which is what I want. However, what I don't want is the header section on one page with the detail section on the next, or the header and some of the detail records on one page with the rest of the detail records on the next. What I would like is the report to start a new page if the header and all the detail records don't fit on the same page but without starting a new page for every group change. How can I achieve this?

you can put the group header and details into a sub report on the old group header section.
then hide the details section

How to create one Oprations button (Create Button Or CreateInsert Button )for all master And Detail block?

hi
I have master And Detail with 4 level ,I want to have on operations button for all block in data control .
(similar to Oracle form toolbar)
how to do it ?

Well, if you tell us your jdev version and what exactly you try to do, without just telling us 'as in forms' we might be able to help.
Most of us don't know how it's done in forms. So be specific when you describe your use case.
Timo

SUMMARY AND DETAIL WORKSHEET

Similar Messages

Maybe you are looking for