SunFire E4900 Mysterious Reboot
Hi!, One of our SunFire E4900's went down today and I am trying to figure out why. This is one of our most critical systems and any crash is considered a major issue to the company. I have opened a ticket with Sun but they were not too helpful stating that I don't have a core dump so they cannot help. However I decided to seek the help of the members on this forum to see if you could provide some guidance on 1. Why a core dump was not saved. 2. What caused the system to reboot and is it possible to diagnose with just the /var/adm/messages file and the logs from the system controller.
Here is a dump of the /var/adm/messages file right after the crash:
May 6 00:00:00 sapp01 syslogd: going down on signal 15
May 7 00:00:01 sapp01 syslogd: going down on signal 15
May 8 00:00:00 sapp01 syslogd: going down on signal 15
May 9 00:00:00 sapp01 syslogd: going down on signal 15
May 10 00:00:01 sapp01 syslogd: going down on signal 15
May 10 13:30:02 sapp01 unix: [ID 836849 kern.notice]
May 10 13:30:02 sapp01 ^Mpanic[cpu10]/thread=31e058fb440:
May 10 13:30:02 sapp01 unix: [ID 237512 kern.notice] bad kernel MMU trap at TL 4
May 10 13:30:02 sapp01 unix: [ID 100000 kern.notice]
May 10 13:30:02 sapp01 unix: [ID 293396 kern.notice] %tl %tpc %tnpc %tstate %tt
May 10 13:30:02 sapp01 unix: [ID 785305 kern.notice] 1 ffffffff7dca8b54 ffffffff7dca8b58 4480001601 0d8
May 10 13:30:02 sapp01 unix: [ID 898499 kern.notice] %ccr: 44 %asi: 80 %cwp: 1 %pstate: 16<PEF,PRIV,IE>
May 10 13:30:02 sapp01 unix: [ID 785305 kern.notice] 2 0000000001007568 000000000100756c 8080001500 0d0
May 10 13:30:02 sapp01 unix: [ID 898499 kern.notice] %ccr: 80 %asi: 80 %cwp: 0 %pstate: 15<PEF,PRIV,AG>
May 10 13:30:02 sapp01 unix: [ID 785305 kern.notice] 3 0000000001005a04 0000000001005a08 8010001507 068
May 10 13:30:02 sapp01 unix: [ID 898499 kern.notice] %ccr: 80 %asi: 10 %cwp: 7 %pstate: 15<PEF,PRIV,AG>
May 10 13:30:02 sapp01 unix: [ID 785305 kern.notice] 4 0000000001004d20 0000000001004d24 8010041407 034
May 10 13:30:02 sapp01 unix: [ID 898499 kern.notice] %ccr: 80 %asi: 10 %cwp: 7 %pstate: 414<MG,PEF,PRIV>
May 10 13:30:02 sapp01 unix: [ID 216294 kern.notice] %g0-3: 0000000000000000 0000000000000005 00000000afde0920 00000000afde092
0
May 10 13:30:02 sapp01 unix: [ID 600269 kern.notice] %g4-7: 0000000000000000 0000000000000034 0000000000000000 000000000000000
4
May 10 13:30:02 sapp01 unix: [ID 531632 kern.notice] Register window 7, caller ism_tsb_entries+98
May 10 13:30:02 sapp01 unix: [ID 454034 kern.notice] %o0-3: 0000000380000000 0000000000000101 0000000380000000 000000000000400
0
May 10 13:30:02 sapp01 %o4-7: 0000000000000000 0000000000000000 ffffffff7fffdc01 ffffffff7dca253c
May 10 13:30:02 sapp01 unix: [ID 960796 kern.notice] %l0-3: 0000000000000214 0000000000000001 0000000000000004 000002a10518543
8
May 10 13:30:02 sapp01 %l4-7: 0000000000000001 000000000144bca0 0000000000000040 000002a1051853a8
May 10 13:30:02 sapp01 unix: [ID 567577 kern.notice] %i0-3: 00000300202f6e50 0000031e058fb440 0000000000000020 000000000000000
1
May 10 13:30:02 sapp01 %i4-7: 00000000015b4c0c 0000000000000001 000002a105184df1 0000000001018f44
May 10 13:30:02 sapp01 unix: [ID 100000 kern.notice]
May 10 13:30:02 sapp01 last message repeated 1 time
May 10 13:30:02 sapp01 genunix: [ID 672855 kern.notice] syncing file systems...
May 10 13:30:10 sapp01 genunix: [ID 733762 kern.notice] 6
May 10 13:30:13 sapp01 genunix: [ID 733762 kern.notice] 3
May 10 13:30:17 sapp01 genunix: [ID 904073 kern.notice] done
May 10 13:30:18 sapp01 genunix: [ID 111219 kern.notice] dumping to /dev/dsk/c0t0d0s1, offset 65536, content: kernel
May 10 13:31:42 sapp01 genunix: [ID 409368 kern.notice] ^M100% done: 383594 pages dumped, compression ratio 2.97,
May 10 13:31:42 sapp01 genunix: [ID 851671 kern.notice] dump succeeded
May 10 13:35:46 sapp01 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.9 Version Generic_122300-18 64-bit
May 10 13:35:46 sapp01 genunix: [ID 943905 kern.notice] Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
According to the logs a dump was taken successfully and should be in /var/crash/sapp01n according to the log statements seen here:
dumping to /dev/dsk/c0t0d0s1, offset 65536, content:
M100% done: 383594 pages dumped, compression ratio 2.97,
and the output from our dumpadm
sapp01:root:/->dumpadm
Dump content: kernel pages
Dump device: /dev/dsk/c0t0d0s1 (dedicated)
Savecore directory: /var/crash/sapp01n
Savecore enabled: yes
However, when I navigate to the dump directory in /var/crash/sapp01n, I do not see any core dump the directory is blank. Why is our system not saving coredump info and how can we diagnose a crash without one?
Next are the logs from the crash itself:
May 10 00:00:01 sapp01 syslogd: going down on signal 15
May 10 13:30:02 sapp01 unix: [ID 836849 kern.notice]
May 10 13:30:02 sapp01 ^Mpanic[cpu10]/thread=31e058fb440:
May 10 13:30:02 sapp01 unix: [ID 237512 kern.notice] bad kernel MMU trap at TL 4
May 10 13:30:02 sapp01 unix: [ID 100000 kern.notice]
May 10 13:30:02 sapp01 unix: [ID 293396 kern.notice] %tl %tpc %tnpc %tstate %tt
May 10 13:30:02 sapp01 unix: [ID 785305 kern.notice] 1 ffffffff7dca8b54 ffffffff7dca8b58 4480001601 0d8
May 10 13:30:02 sapp01 unix: [ID 898499 kern.notice] %ccr: 44 %asi: 80 %cwp: 1 %pstate: 16<PEF,PRIV,IE>
May 10 13:30:02 sapp01 unix: [ID 785305 kern.notice] 2 0000000001007568 000000000100756c 8080001500 0d0
May 10 13:30:02 sapp01 unix: [ID 898499 kern.notice] %ccr: 80 %asi: 80 %cwp: 0 %pstate: 15<PEF,PRIV,AG>
May 10 13:30:02 sapp01 unix: [ID 785305 kern.notice] 3 0000000001005a04 0000000001005a08 8010001507 068
May 10 13:30:02 sapp01 unix: [ID 898499 kern.notice] %ccr: 80 %asi: 10 %cwp: 7 %pstate: 15<PEF,PRIV,AG>
May 10 13:30:02 sapp01 unix: [ID 785305 kern.notice] 4 0000000001004d20 0000000001004d24 8010041407 034
May 10 13:30:02 sapp01 unix: [ID 898499 kern.notice] %ccr: 80 %asi: 10 %cwp: 7 %pstate: 414<MG,PEF,PRIV>
May 10 13:30:02 sapp01 unix: [ID 216294 kern.notice] %g0-3: 0000000000000000 0000000000000005 00000000afde0920 00000000afde092
0
May 10 13:30:02 sapp01 unix: [ID 600269 kern.notice] %g4-7: 0000000000000000 0000000000000034 0000000000000000 000000000000000
4
May 10 13:30:02 sapp01 unix: [ID 531632 kern.notice] Register window 7, caller ism_tsb_entries+98
May 10 13:30:02 sapp01 unix: [ID 454034 kern.notice] %o0-3: 0000000380000000 0000000000000101 0000000380000000 000000000000400
0
May 10 13:30:02 sapp01 %o4-7: 0000000000000000 0000000000000000 ffffffff7fffdc01 ffffffff7dca253c
May 10 13:30:02 sapp01 unix: [ID 960796 kern.notice] %l0-3: 0000000000000214 0000000000000001 0000000000000004 000002a10518543
8
May 10 13:30:02 sapp01 %l4-7: 0000000000000001 000000000144bca0 0000000000000040 000002a1051853a8
May 10 13:30:02 sapp01 unix: [ID 567577 kern.notice] %i0-3: 00000300202f6e50 0000031e058fb440 0000000000000020 000000000000000
1
May 10 13:30:02 sapp01 %i4-7: 00000000015b4c0c 0000000000000001 000002a105184df1 0000000001018f44
May 10 13:30:02 sapp01 unix: [ID 100000 kern.notice]
May 10 13:30:02 sapp01 last message repeated 1 time
May 10 13:30:02 sapp01 genunix: [ID 672855 kern.notice] syncing file systems...
Can anyone decipher what this could possible mean? Sun support is totally lost and basically turned me away because of no core dump. Could this have been a CPU issue causing the system to panic. We recently had the CPU's replaced on this system and the system has been running for less than a year.
Thanks for the help.
First, is there any logging in the reboot after the crash about savecore being unable to extract the crash dump from your dump device? Maybe there wasn't enough space to extract the crash dump files?
Second, what's the mod time on the /var/crash/sapp01n directory? If it's after the crash, maybe something removed the crash dump files.
Third, if you're lucky maybe your crash dump is still on your dump device (another benefit of having a dedicated dump device) and you can run "savecore -d" to extract it. And if there isn't enough space to extract it, you can also specify the location you want the crash dump files written to. Read the man page for "savecore".
Fourth, that log file looks to me that you had some memory go bad on you.
Similar Messages
-
Sunfire E4900 Console Login by Serial port
How to login in console of SUNFIRE E4900 server by serial port ? Exactly which cable is required to connect with laptop usb ?
I dont have netmanagement IP.Corret.
You use 25 male connector for connect to SC, DB9 female connector for connect to USB converter, but this cable must be null-modem.
Minimum required connections:
DB25 DB9
2 ---- 2
3 ---- 3
7 ---- 5
Regards. -
Why does Lion immediately reboot with FileVault Enabled?
I have two laptops, both with Lion installed and both are updated to the latest patches.
Here's the process I go through:
Shutdown the laptop
Do something else (take a nap, eat a sandwich, whatever)
Boot laptop
Log in
Here I get the little grey pinwheel for a while (30+ seconds, far longer that I'd expect with either a brand new Air or a 2010 MBP 15")
Experience an immediate reboot.
Log in
Profit
After that mysterious reboot, everything is fine. I went through my profile and removed every startup item and stripped everything out of my LaunchAgents folder. The problem still persisted. On a lark, I disabled FileVault. After FileVault was disabled and I rebooted, everything worked fine. I was able to shutdown my computer without fear of a double reboot.
I re-enabled FileVault to test out my assumption and, sure enough, the problem was back.
Is there something that could be causing this that I'm not aware of and my Mac is behaving oddly because of weird things I've done? I've included my logs (apologies for the length of the post).
9/10/11 9:03:55.000 PM bootlog BOOT_TIME 1315713835 0
9/10/11 9:03:56.000 PM kernel PMAP: PCID enabled
9/10/11 9:03:56.000 PM kernel Darwin Kernel Version 11.0.1: Thu Jul 28 02:01:39 PDT 2011; root:xnu-1699.23.4~1/RELEASE_X86_64
9/10/11 9:03:56.000 PM kernel vm_page_bootstrap: 987450 free pages and 52934 wired pages
9/10/11 9:03:56.000 PM kernel kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
9/10/11 9:03:56.000 PM kernel zone leak detection enabled
9/10/11 9:03:56.000 PM kernel standard timeslicing quantum is 10000 us
9/10/11 9:03:56.000 PM kernel mig_table_max_displ = 72
9/10/11 9:03:56.000 PM kernel TSC Deadline Timer supported and enabled
9/10/11 9:03:56.000 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
9/10/11 9:03:56.000 PM kernel AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
9/10/11 9:03:56.000 PM kernel AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
9/10/11 9:03:56.000 PM kernel AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
9/10/11 9:03:56.000 PM kernel AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
9/10/11 9:03:56.000 PM kernel AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
9/10/11 9:03:56.000 PM kernel AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
9/10/11 9:03:56.000 PM kernel AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
9/10/11 9:03:56.000 PM kernel calling mpo_policy_init for TMSafetyNet
9/10/11 9:03:56.000 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
9/10/11 9:03:56.000 PM kernel calling mpo_policy_init for Sandbox
9/10/11 9:03:56.000 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
9/10/11 9:03:56.000 PM kernel calling mpo_policy_init for Quarantine
9/10/11 9:03:56.000 PM kernel Security policy loaded: Quarantine policy (Quarantine)
9/10/11 9:03:56.000 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
9/10/11 9:03:56.000 PM kernel The Regents of the University of California. All rights reserved.
9/10/11 9:03:56.000 PM kernel MAC Framework successfully initialized
9/10/11 9:03:56.000 PM kernel using 16384 buffer headers and 10240 cluster IO buffer headers
9/10/11 9:03:56.000 PM kernel IOAPIC: Version 0x20 Vectors 64:87
9/10/11 9:03:56.000 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
9/10/11 9:03:56.000 PM kernel PFM64 0xf10000000, 0xf0000000
9/10/11 9:03:56.000 PM kernel [ PCI configuration begin ]
9/10/11 9:03:56.000 PM kernel AppleIntelCPUPowerManagement: Turbo Ratios 008B
9/10/11 9:03:56.000 PM kernel AppleIntelCPUPowerManagement: (built 20:03:42 Jun 29 2011) initialization complete
9/10/11 9:03:56.000 PM kernel console relocated to 0xf10000000
9/10/11 9:03:56.000 PM kernel PCI configuration changed (bridge=11 device=2 cardbus=0)
9/10/11 9:03:56.000 PM kernel [ PCI configuration end, bridges 8 devices 13 ]
9/10/11 9:03:56.000 PM kernel mbinit: done [64 MB total pool size, (42/21) split]
9/10/11 9:03:56.000 PM kernel Pthread support ABORTS when sync kernel primitives misused
9/10/11 9:03:56.000 PM kernel com.apple.AppleFSCompressionTypeZlib kmod start
9/10/11 9:03:56.000 PM kernel com.apple.AppleFSCompressionTypeDataless kmod start
9/10/11 9:03:56.000 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
9/10/11 9:03:56.000 PM kernel com.apple.AppleFSCompressionTypeDataless load succeeded
9/10/11 9:03:56.000 PM kernel AppleIntelCPUPowerManagementClient: ready
9/10/11 9:03:56.000 PM kernel BTCOEXIST off
9/10/11 9:03:56.000 PM kernel wl0: Broadcom BCM4353 802.11 Wireless Controller
9/10/11 9:03:56.000 PM kernel 5.100.98.75
9/10/11 9:03:56.000 PM kernel CoreStorage: fsck has finished successfully for lvg "7CE50589-3B73-4161-BF52-86EF8108BDEC"
9/10/11 9:03:56.000 PM kernel thr 0xffffff800b43e480 cs_thread_create thread=0xffffff800b95dc68 arg=0xffffff800b95d800
9/10/11 9:03:56.000 PM kernel thr 0xffffff800b43e480 cs_thread_create thread=0xffffff800b95dee0 arg=0xffffff800b95d800
9/10/11 9:03:56.000 PM kernel USBMSC Identifier (non-unique): 000000000310 0x5ac 0x8404 0x310
9/10/11 9:03:56.000 PM kernel AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
9/10/11 9:03:56.000 PM kernel [IOBluetoothHCIController::setConfigState] calling registerService
9/10/11 9:03:56.000 PM kernel rooting via boot-uuid from /chosen: 546A6D68-313F-3B89-A7CD-C449F3D2042A
9/10/11 9:03:56.000 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
9/10/11 9:03:56.000 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD SM256C Media/IOGUIDPartitionScheme/Macintosh HD@2/CoreStoragePhysical/CoreStorageGroup/Macintosh HD@s0
9/10/11 9:03:56.000 PM kernel BSD root: disk1, major 14, minor 4
9/10/11 9:03:56.000 PM kernel Kernel is LP64
9/10/11 9:03:56.000 PM kernel IOThunderboltSwitch::i2cWriteDWord - status = 0xe00002ed
9/10/11 9:03:56.000 PM kernel IOThunderboltSwitch::i2cWriteDWord - status = 0x00000000
9/10/11 9:03:56.000 PM kernel IOThunderboltSwitch::i2cWriteDWord - status = 0xe00002ed
9/10/11 9:03:56.000 PM kernel IOThunderboltSwitch::i2cWriteDWord - status = 0xe00002ed
9/10/11 9:03:56.114 PM com.apple.launchd *** launchd[1] has started up. ***
9/10/11 9:03:56.552 PM com.apple.launchd (com.parallels.desktop.launchdaemon) Unknown key for boolean: HopefullyExitsFirst
9/10/11 9:03:57.000 PM kernel AirPort_Brcm4331: Ethernet address 28:37:37:23:fa:3e
9/10/11 9:03:57.000 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
9/10/11 9:03:57.000 PM kernel IO80211Interface::efiNVRAMPublished():
9/10/11 9:03:57.289 PM UserEventAgent starting CaptiveNetworkSupport as SystemEventAgent built Jun 25 2011 01:16:59
9/10/11 9:03:57.293 PM UserEventAgent CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
9/10/11 9:03:57.294 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
9/10/11 9:03:57.294 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:03:57.294 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:03:57.294 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
9/10/11 9:03:57.295 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:03:57.295 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:03:57.368 PM UserEventAgent CertsKeychainMonitor: configuring
9/10/11 9:03:58.363 PM com.apple.SecurityServer Session 100000 created
9/10/11 9:03:58.481 PM com.apple.SecurityServer Entering service
9/10/11 9:03:58.565 PM UserEventAgent ServermgrdRegistration cannot load config data
9/10/11 9:03:58.575 PM UserEventAgent get_backup_share_points no AFP
9/10/11 9:03:58.784 PM airportd _processDLILEvent: en0 attached (down)
9/10/11 9:03:58.000 PM kernel Created virtif 0xffffff800bc90200 p2p0
9/10/11 9:03:58.000 PM kernel AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
9/10/11 9:03:58.815 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:03:58.816 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:03:58.828 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
9/10/11 9:03:58.833 PM configd bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
9/10/11 9:03:58.833 PM configd DHCP en0: INIT transmit failed
9/10/11 9:03:58.885 PM configd setting hostname to "A-Tiny-Goat.local"
9/10/11 9:03:58.000 PM kernel Previous Shutdown Cause: 5
9/10/11 9:03:58.896 PM configd network configuration changed.
9/10/11 9:03:59.245 PM com.apple.kextd Kext id com.parallels.kext.prl_hid_hook not found; removing personalities from kernel.
9/10/11 9:03:59.245 PM com.apple.kextd String/URL conversion failure.
9/10/11 9:03:59.258 PM com.apple.kextd Kext id com.parallels.kext.prl_hid_hook not found; removing personalities from kernel.
9/10/11 9:03:59.258 PM com.apple.kextd String/URL conversion failure.
9/10/11 9:03:59.267 PM com.apple.kextd Kext id com.parallels.kext.prl_hypervisor not found; removing personalities from kernel.
9/10/11 9:03:59.267 PM com.apple.kextd String/URL conversion failure.
9/10/11 9:03:59.000 PM kernel Initializing
9/10/11 9:03:59.000 PM kernel Probing
9/10/11 9:03:59.000 PM kernel DSMOS has arrived
9/10/11 9:03:59.000 PM kernel V1.4.33: Starting iSCSIInitiatorIOKitDriver
9/10/11 9:03:59.000 PM kernel com_DataRobotics_iSCSIInitiatorIOKitDriver: setPowerState Enter with powerState: 1 and device: c62a700
9/10/11 9:03:59.000 PM kernel com_DataRobotics_iSCSIInitiatorIOKitDriver: Power state transition (1) completed!
9/10/11 9:03:59.000 PM kernel Starting2
9/10/11 9:03:59.000 PM kernel getHardwareAddress
9/10/11 9:03:59.000 PM kernel com_jft_driver_PdaNetDrv: Ethernet address 0b:0b:0b:0b:0b:0b
9/10/11 9:03:59.000 PM kernel enable
9/10/11 9:03:59.000 PM kernel IONetworkController::enable
9/10/11 9:03:59.000 PM kernel createMediumTables
9/10/11 9:03:59.000 PM kernel enable end
9/10/11 9:03:59.438 PM systemkeychain done file: /var/run/systemkeychaincheck.done
9/10/11 9:04:00.000 PM kernel en0: 802.11d country code set to 'US'.
9/10/11 9:04:00.000 PM kernel en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
9/10/11 9:04:00.000 PM kernel MacAuthEvent en0 Auth result for: b8:c7:5d:03:78:ae MAC AUTH succeeded
9/10/11 9:04:00.000 PM kernel wlEvent: en0 en0 Link UP
9/10/11 9:04:00.000 PM kernel AirPort: Link Up on en0
9/10/11 9:04:00.000 PM kernel en0: BSSID changed to b8:c7:5d:03:78:ae
9/10/11 9:04:00.000 PM kernel AirPort: RSN handshake complete on en0
9/10/11 9:04:13.817 PM UserEventAgent ServermgrdRegistration cannot load config data
9/10/11 9:04:13.817 PM UserEventAgent ServermgrdRegistration oldConfig is nil during net changed notification
9/10/11 9:04:15.916 PM configd subnet_route: write routing socket failed, Network is unreachable
9/10/11 9:04:16.724 PM configd subnet_route: write routing socket failed, Network is unreachable
9/10/11 9:04:17.525 PM configd network configuration changed.
9/10/11 9:04:17.563 PM mDNSResponder mDNSResponder mDNSResponder-320.5.1 (Aug 3 2011 18:37:55) starting OSXVers 11
9/10/11 9:04:17.596 PM configd network configuration changed.
9/10/11 9:04:17.598 PM configd network configuration changed.
9/10/11 9:04:17.605 PM mDNSResponder D2D_IPC: Loaded
9/10/11 9:04:17.605 PM mDNSResponder D2DInitialize succeeded
9/10/11 9:04:18.336 PM configd network configuration changed.
9/10/11 9:04:18.349 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - Probe
9/10/11 9:04:18.349 PM UserEventAgent CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
9/10/11 9:04:18.350 PM UserEventAgent CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Carl's World 5GHz because it is protected and not on the exception list
9/10/11 9:04:18.352 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - Unknown
9/10/11 9:04:18.353 PM configd network configuration changed.
9/10/11 9:04:21.911 PM fseventsd Logging disabled completely for device:1: /Volumes/Recovery HD
9/10/11 9:04:22.066 PM mDNSResponder mDNSResponder mDNSResponder-320.5.1 (Aug 3 2011 18:37:55) stopping
9/10/11 9:04:22.066 PM com.apple.SecurityServer Killing auth hosts
9/10/11 9:04:22.066 PM configd dnssd_clientstub read_all(27) failed 0/28 0
9/10/11 9:04:58.000 PM bootlog BOOT_TIME 1315713898 0
9/10/11 9:04:59.000 PM kernel PMAP: PCID enabled
9/10/11 9:04:59.000 PM kernel Darwin Kernel Version 11.0.1: Thu Jul 28 02:01:39 PDT 2011; root:xnu-1699.23.4~1/RELEASE_X86_64
9/10/11 9:04:59.000 PM kernel vm_page_bootstrap: 987473 free pages and 52911 wired pages
9/10/11 9:04:59.000 PM kernel kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
9/10/11 9:04:59.000 PM kernel zone leak detection enabled
9/10/11 9:04:59.000 PM kernel standard timeslicing quantum is 10000 us
9/10/11 9:04:59.000 PM kernel mig_table_max_displ = 72
9/10/11 9:04:59.000 PM kernel TSC Deadline Timer supported and enabled
9/10/11 9:04:59.000 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
9/10/11 9:04:59.000 PM kernel AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
9/10/11 9:04:59.000 PM kernel AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
9/10/11 9:04:59.000 PM kernel AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
9/10/11 9:04:59.000 PM kernel AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
9/10/11 9:04:59.000 PM kernel AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
9/10/11 9:04:59.000 PM kernel AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
9/10/11 9:04:59.000 PM kernel AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
9/10/11 9:04:59.000 PM kernel calling mpo_policy_init for TMSafetyNet
9/10/11 9:04:59.000 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
9/10/11 9:04:59.000 PM kernel calling mpo_policy_init for Sandbox
9/10/11 9:04:59.000 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
9/10/11 9:04:59.000 PM kernel calling mpo_policy_init for Quarantine
9/10/11 9:04:59.000 PM kernel Security policy loaded: Quarantine policy (Quarantine)
9/10/11 9:04:59.000 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
9/10/11 9:04:59.000 PM kernel The Regents of the University of California. All rights reserved.
9/10/11 9:04:59.000 PM kernel MAC Framework successfully initialized
9/10/11 9:04:59.000 PM kernel using 16384 buffer headers and 10240 cluster IO buffer headers
9/10/11 9:04:59.000 PM kernel IOAPIC: Version 0x20 Vectors 64:87
9/10/11 9:04:59.000 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
9/10/11 9:04:59.000 PM kernel PFM64 0xf10000000, 0xf0000000
9/10/11 9:04:59.000 PM kernel [ PCI configuration begin ]
9/10/11 9:04:59.000 PM kernel AppleIntelCPUPowerManagement: Turbo Ratios 008B
9/10/11 9:04:59.000 PM kernel AppleIntelCPUPowerManagement: (built 20:03:42 Jun 29 2011) initialization complete
9/10/11 9:04:59.000 PM kernel console relocated to 0xf10000000
9/10/11 9:04:59.000 PM kernel PCI configuration changed (bridge=11 device=2 cardbus=0)
9/10/11 9:04:59.000 PM kernel [ PCI configuration end, bridges 8 devices 13 ]
9/10/11 9:04:59.000 PM kernel mbinit: done [64 MB total pool size, (42/21) split]
9/10/11 9:04:59.000 PM kernel Pthread support ABORTS when sync kernel primitives misused
9/10/11 9:04:59.000 PM kernel com.apple.AppleFSCompressionTypeZlib kmod start
9/10/11 9:04:59.000 PM kernel com.apple.AppleFSCompressionTypeDataless kmod start
9/10/11 9:04:59.000 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
9/10/11 9:04:59.000 PM kernel com.apple.AppleFSCompressionTypeDataless load succeeded
9/10/11 9:04:59.000 PM kernel AppleIntelCPUPowerManagementClient: ready
9/10/11 9:04:59.000 PM kernel BTCOEXIST off
9/10/11 9:04:59.000 PM kernel wl0: Broadcom BCM4353 802.11 Wireless Controller
9/10/11 9:04:59.000 PM kernel 5.100.98.75
9/10/11 9:04:59.000 PM kernel CoreStorage: fsck has finished successfully for lvg "7CE50589-3B73-4161-BF52-86EF8108BDEC"
9/10/11 9:04:59.000 PM kernel thr 0xffffff800b42b8c0 cs_thread_create thread=0xffffff800b91fc68 arg=0xffffff800b91f800
9/10/11 9:04:59.000 PM kernel thr 0xffffff800b42b8c0 cs_thread_create thread=0xffffff800b91fee0 arg=0xffffff800b91f800
9/10/11 9:04:59.000 PM kernel USBMSC Identifier (non-unique): 000000000310 0x5ac 0x8404 0x310
9/10/11 9:04:59.000 PM kernel AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
9/10/11 9:04:59.000 PM kernel rooting via boot-uuid from /chosen: 546A6D68-313F-3B89-A7CD-C449F3D2042A
9/10/11 9:04:59.000 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
9/10/11 9:04:59.000 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD SM256C Media/IOGUIDPartitionScheme/Macintosh HD@2/CoreStoragePhysical/CoreStorageGroup/Macintosh HD@s0
9/10/11 9:04:59.000 PM kernel BSD root: disk1, major 14, minor 4
9/10/11 9:04:59.000 PM kernel Kernel is LP64
9/10/11 9:04:59.000 PM kernel IOThunderboltSwitch::i2cWriteDWord - status = 0xe00002ed
9/10/11 9:04:59.000 PM kernel IOThunderboltSwitch::i2cWriteDWord - status = 0x00000000
9/10/11 9:04:59.000 PM kernel IOThunderboltSwitch::i2cWriteDWord - status = 0xe00002ed
9/10/11 9:04:59.000 PM kernel IOThunderboltSwitch::i2cWriteDWord - status = 0xe00002ed
9/10/11 9:04:59.000 PM kernel [IOBluetoothHCIController::setConfigState] calling registerService
9/10/11 9:04:59.112 PM com.apple.launchd *** launchd[1] has started up. ***
9/10/11 9:04:59.543 PM com.apple.launchd (com.parallels.desktop.launchdaemon) Unknown key for boolean: HopefullyExitsFirst
9/10/11 9:05:00.000 PM kernel AirPort_Brcm4331: Ethernet address 28:37:37:23:fa:3e
9/10/11 9:05:00.000 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
9/10/11 9:05:00.000 PM kernel IO80211Interface::efiNVRAMPublished():
9/10/11 9:05:00.218 PM UserEventAgent starting CaptiveNetworkSupport as SystemEventAgent built Jun 25 2011 01:16:59
9/10/11 9:05:00.222 PM UserEventAgent CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
9/10/11 9:05:00.223 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
9/10/11 9:05:00.224 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:05:00.224 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:05:00.224 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
9/10/11 9:05:00.224 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:05:00.224 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:05:00.297 PM UserEventAgent CertsKeychainMonitor: configuring
9/10/11 9:05:01.264 PM com.apple.SecurityServer Session 100000 created
9/10/11 9:05:01.393 PM com.apple.SecurityServer Entering service
9/10/11 9:05:01.468 PM UserEventAgent ServermgrdRegistration cannot load config data
9/10/11 9:05:01.478 PM UserEventAgent get_backup_share_points no AFP
9/10/11 9:05:01.718 PM airportd _processDLILEvent: en0 attached (down)
9/10/11 9:05:01.000 PM kernel Created virtif 0xffffff800bd90000 p2p0
9/10/11 9:05:01.000 PM kernel Previous Shutdown Cause: 5
9/10/11 9:05:01.754 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:05:01.754 PM UserEventAgent CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
9/10/11 9:05:01.771 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
9/10/11 9:05:01.779 PM configd bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
9/10/11 9:05:01.779 PM configd DHCP en0: INIT transmit failed
9/10/11 9:05:01.000 PM kernel AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
9/10/11 9:05:01.836 PM configd network configuration changed.
9/10/11 9:05:01.839 PM configd setting hostname to "A-Tiny-Goat.local"
9/10/11 9:05:02.121 PM com.apple.kextd Kext id com.parallels.kext.prl_hid_hook not found; removing personalities from kernel.
9/10/11 9:05:02.121 PM com.apple.kextd String/URL conversion failure.
9/10/11 9:05:02.128 PM com.apple.kextd Kext id com.parallels.kext.prl_hid_hook not found; removing personalities from kernel.
9/10/11 9:05:02.128 PM com.apple.kextd String/URL conversion failure.
9/10/11 9:05:02.137 PM com.apple.kextd Kext id com.parallels.kext.prl_hypervisor not found; removing personalities from kernel.
9/10/11 9:05:02.137 PM com.apple.kextd String/URL conversion failure.
9/10/11 9:05:02.000 PM kernel Initializing
9/10/11 9:05:02.000 PM kernel Probing
9/10/11 9:05:02.000 PM kernel DSMOS has arrived
9/10/11 9:05:02.000 PM kernel V1.4.33: Starting iSCSIInitiatorIOKitDriver
9/10/11 9:05:02.000 PM kernel com_DataRobotics_iSCSIInitiatorIOKitDriver: setPowerState Enter with powerState: 1 and device: c5eb600
9/10/11 9:05:02.000 PM kernel com_DataRobotics_iSCSIInitiatorIOKitDriver: Power state transition (1) completed!
9/10/11 9:05:02.000 PM kernel Starting2
9/10/11 9:05:02.000 PM kernel getHardwareAddress
9/10/11 9:05:02.000 PM kernel com_jft_driver_PdaNetDrv: Ethernet address 0b:0b:0b:0b:0b:0b
9/10/11 9:05:02.000 PM kernel enable
9/10/11 9:05:02.000 PM kernel IONetworkController::enable
9/10/11 9:05:02.000 PM kernel createMediumTables
9/10/11 9:05:02.000 PM kernel enable end
9/10/11 9:05:02.347 PM systemkeychain done file: /var/run/systemkeychaincheck.done
9/10/11 9:05:02.778 PM com.apple.pfctl No ALTQ support in kernel
9/10/11 9:05:02.778 PM com.apple.pfctl ALTQ related functions disabled
9/10/11 9:05:02.791 PM com.apple.ucupdate.plist ucupdate: Checked 1 update, no match found.
9/10/11 9:05:02.857 PM corestoraged 0x7fff7419a960 unlockLVF: LVF=22506CB3-4081-4030-945D-899E34848901, "AES-XTS", status = "Unlocked"
9/10/11 9:05:03.001 PM Parallels Unloading kernel extension prl_usb_connect.kext
9/10/11 9:05:03.000 PM kernel macx_swapon SUCCESS
9/10/11 9:05:03.016 PM mDNSResponder mDNSResponder mDNSResponder-320.5.1 (Aug 3 2011 18:37:55) starting OSXVers 11
9/10/11 9:05:03.134 PM loginwindow Login Window Application Started
9/10/11 9:05:03.196 PM com.apple.usbmuxd usbmuxd-211 built on May 16 2011 at 00:14:56 on May 16 2011 at 00:14:55, running 64 bit
9/10/11 9:05:03.000 PM kernel en0: 802.11d country code set to 'US'.
9/10/11 9:05:03.206 PM configd network configuration changed.
9/10/11 9:05:03.000 PM kernel en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
9/10/11 9:05:03.211 PM configd network configuration changed.
9/10/11 9:05:03.256 PM mDNSResponder D2D_IPC: Loaded
9/10/11 9:05:03.256 PM mDNSResponder D2DInitialize succeeded
9/10/11 9:05:03.271 PM Parallels Unloading kernel extension prl_hid_hook.kext
9/10/11 9:05:03.000 PM kernel MacAuthEvent en0 Auth result for: b8:c7:5d:03:78:ae MAC AUTH succeeded
9/10/11 9:05:03.000 PM kernel wlEvent: en0 en0 Link UP
9/10/11 9:05:03.000 PM kernel AirPort: Link Up on en0
9/10/11 9:05:03.000 PM kernel en0: BSSID changed to b8:c7:5d:03:78:ae
9/10/11 9:05:03.000 PM kernel AirPort: RSN handshake complete on en0
9/10/11 9:05:03.413 PM FDERecoveryAgent Waiting for CoreStorage encryption be activated, will try again in 5 seconds
9/10/11 9:05:03.439 PM Parallels Unloading kernel extension prl_hypervisor.kext
9/10/11 9:05:03.440 PM com.apple.kextcache /: helper partitions appear up to date.
9/10/11 9:05:03.568 PM Parallels Loading kernel extension prl_usb_connect.kext
9/10/11 9:05:03.581 PM com.apple.kextd Cache file /System/Library/Caches/com.apple.kext.caches/Directories/System/Library/Extensi ons/KextIdentifiers.plist.gz is out of date; not using.
9/10/11 9:05:03.638 PM netbiosd Unable to start NetBIOS name service:
9/10/11 9:05:03.796 PM mds (Normal) FMW: FMW 0 0
9/10/11 9:05:03.898 PM mds (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
9/10/11 9:05:03.900 PM mds (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
9/10/11 9:05:04.021 PM mds (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
9/10/11 9:05:04.692 PM Parallels Loading kernel extension prl_hypervisor.kext
9/10/11 9:05:04.724 PM com.apple.kextd Cache file /System/Library/Caches/com.apple.kext.caches/Directories/System/Library/Extensi ons/KextIdentifiers.plist.gz is out of date; not using.
9/10/11 9:05:04.967 PM prl_client_app CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
9/10/11 9:05:05.000 PM kernel nspace-handler-set-snapshot-time: 1315713906
9/10/11 9:05:05.272 PM Parallels Loading kernel extension prl_hid_hook.kext
9/10/11 9:05:05.308 PM com.apple.kextd Cache file /System/Library/Caches/com.apple.kext.caches/Directories/System/Library/Extensi ons/KextIdentifiers.plist.gz is out of date; not using.
9/10/11 9:05:05.000 PM kernel /drv/ HypVtx.c:186 CPU is Intel
9/10/11 9:05:05.000 PM kernel /drv/ HypLowCache.c:193 Low cache initialized (35520 kB for 8 VMs on 4096 MB)
9/10/11 9:05:05.000 PM kernel /drv/ HypApic.c:211 Host APIC phy 0xFEE00000 lin 0xffffff80b1304000 ver 0x15
9/10/11 9:05:05.000 PM kernel /drv/ HypVtd.c:3941 [vtdInit]
9/10/11 9:05:05.000 PM kernel /drv/ HypVtd.c:3957 [vtdInit] VTD initialization disabled
9/10/11 9:05:05.000 PM kernel /drv/ HypSMBios.c:54 Failed to find SMBios entry point
9/10/11 9:05:05.000 PM kernel /drv/ HypModule.c:184 Parallels IPI irq = 0 ipi = 0(0x0)
9/10/11 9:05:05.000 PM kernel /drv/ HypModule.c:194 Parallels Hypervisor 7.0.14920.689535 loaded.
9/10/11 9:05:05.000 PM kernel nstat_lookup_entry failed: 2
9/10/11 9:05:05.546 PM prl_client_app CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
9/10/11 9:05:05.772 PM Parallels Trying to load kernel extensions, exit status: 0
9/10/11 9:05:05.776 PM Parallels Starting Parallels networking...
9/10/11 9:05:05.781 PM Parallels Loading kernel extension prl_netbridge.kext
9/10/11 9:05:05.837 PM Parallels Loading kernel extension prl_vnic.kext
9/10/11 9:05:05.000 PM kernel /prl_hid/ Parallels HID Helper started.
9/10/11 9:05:05.000 PM kernel com.parallels.kext.prlnet 7.0.14920.689535 has started.
9/10/11 9:05:05.000 PM kernel com.parallels.kext.vnic 7.0.14920.689535 has started.
9/10/11 9:05:05.000 PM kernel com_parallels_kext_prl_vnic: created vnic0
9/10/11 9:05:05.000 PM kernel com_parallels_kext_prl_vnic: created vnic1
9/10/11 9:05:06.015 PM Parallels Parallels networking sucessfully started
9/10/11 9:05:06.019 PM Parallels Restarting CiscoVPN
9/10/11 9:05:06.029 PM SystemStarter Unknown service: CiscoVPN
9/10/11 9:05:06.035 PM Parallels Starting Parallels Dispatcher Service
9/10/11 9:05:06.042 PM Parallels Parallels Dispatcher Service sucessfully started
9/10/11 9:05:06.049 PM prl_naptd Starting Parallels Network Daemon
9/10/11 9:05:06.191 PM prl_naptd vnic0: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
9/10/11 9:05:06.192 PM prl_naptd vnic1: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
9/10/11 9:05:06.270 PM loginwindow **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
9/10/11 9:05:06.551 PM com.apple.launchctl.LoginWindow com.apple.findmymacmessenger: Already loaded
9/10/11 9:05:06.724 PM airportd _doAutoJoin: Already associated to “Carl's World 5GHz”. Bailing on auto-join.
9/10/11 9:05:06.728 PM com.apple.SecurityServer Session 100005 created
9/10/11 9:05:06.730 PM loginwindow Login Window Started Security Agent
9/10/11 9:05:06.782 PM WindowServer kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
9/10/11 9:05:06.789 PM loginwindow kCGErrorFailure: CGSPackagesGetWorkspaceType: couldn't get workspace type
9/10/11 9:05:06.789 PM loginwindow kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
9/10/11 9:05:06.899 PM SecurityAgent Echo enabled
9/10/11 9:05:06.899 PM SecurityAgent Echo enabled
9/10/11 9:05:07.000 PM kernel vnic0: promiscuous mode enable failed
9/10/11 9:05:07.000 PM kernel vnic1: promiscuous mode enable failed
9/10/11 9:05:07.000 PM kernel /drv/ HypIoctls.c:777 Ioctl VT-d status: 0
9/10/11 9:05:07.335 PM TabletDriver Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app
9/10/11 9:05:07.336 PM com.wacom.wacomtablet Sep 10 21:05:07 A-Tiny-Goat.local TabletDriver[212] <Error>: Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app
9/10/11 9:05:07.474 PM SecurityAgent User info context values set for jeremiah
9/10/11 9:05:07.474 PM SecurityAgent User info context values set for jeremiah
9/10/11 9:05:07.569 PM TabletDriver Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
9/10/11 9:05:07.570 PM com.wacom.pentablet Sep 10 21:05:07 A-Tiny-Goat.local TabletDriver[213] <Error>: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
9/10/11 9:05:07.611 PM com.apple.launchd ([0x0-0x6006].com.wacom.TabletDriver[223]) The following job tried to hijack the service "com.wacom.CoordinatorMessageServer" from this job: [0x0-0x8008].com.wacom.TabletDriver
9/10/11 9:05:07.666 PM SecurityAgent Login Window login proceeding
9/10/11 9:05:07.666 PM SecurityAgent Login Window login proceeding
9/10/11 9:05:07.829 PM loginwindow Login Window - Returned from Security Agent
9/10/11 9:05:07.831 PM com.apple.authorizationhost.00000000-0000-0000-0000-0000000186A5 buffer size: 1024 length: 883
9/10/11 9:05:07.897 PM loginwindow USER_PROCESS: 73 console
9/10/11 9:05:07.898 PM com.parallels.vm.prl_naptd QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
9/10/11 9:05:07.898 PM com.parallels.vm.prl_naptd QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
9/10/11 9:05:07.949 PM airportd _doAutoJoin: Already associated to “Carl's World 5GHz”. Bailing on auto-join.
9/10/11 9:05:08.031 PM com.apple.launchd ([0x0-0x7007].com.wacom.Consumer_TouchDriver[225]) Exited with code: 255
9/10/11 9:05:08.031 PM com.apple.launchd (com.wacom.wacomtablet[212]) Exited with code: 255
9/10/11 9:05:08.033 PM com.apple.launchd (com.wacom.pentablet[213]) Exited with code: 255
9/10/11 9:05:08.053 PM com.apple.launchd.peruser.502 (gnu.emacs.daemon) Ignored this key: UserName
9/10/11 9:05:08.053 PM com.apple.launchd.peruser.502 (io.redis.redis-server) Ignored this key: UserName
9/10/11 9:05:08.053 PM com.apple.launchd.peruser.502 (org.postgresql.postgres) Ignored this key: UserName
9/10/11 9:05:08.055 PM com.apple.launchd.peruser.502 (com.apple.quicklook.32bit) Unknown key for boolean: DisallowDataExecute
9/10/11 9:05:08.055 PM com.apple.launchd.peruser.502 (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
9/10/11 9:05:08.461 PM FDERecoveryAgent Waiting for CoreStorage encryption be activated, will try again in 10 seconds
9/10/11 9:05:08.524 PM UserEventAgent CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 14599
9/10/11 9:05:08.721 PM SystemUIServer MenuCracker 2.2 (/Library/Application Support/iStat local/extras/MenuCracker.menu)
See http://sourceforge.net/projects/menucracker
MenuCracker is now loaded. Ready to accept new menu extras.
9/10/11 9:05:08.725 PM SystemUIServer failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat local/extras/MenuCracker.menu> (loaded)
9/10/11 9:05:08.738 PM SystemUIServer MenuCracker: Allowing "iStatMenusTemps".
9/10/11 9:05:08.751 PM SystemUIServer MenuCracker: Allowing "iStatMenusDateAndTimes".
9/10/11 9:05:08.776 PM SystemUIServer MenuCracker: Allowing "iStatMenusBattery".
9/10/11 9:05:08.801 PM SystemUIServer Could not load menu extra NSBundle </Library/Application Support/iStat local/extras/MenuCracker.menu> (loaded) for Class (null)
9/10/11 9:05:09.074 PM com.apple.mtmfs /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//mtmfsMap68
9/10/11 9:05:09.114 PM SystemUIServer iStat Menus loading extra - sensors
9/10/11 9:05:09.312 PM com.apple.launchd.peruser.502 (io.redis.redis-server[275]) posix_spawn("/usr/local/Cellar/redis/2.2.2/bin/redis-server", ...): No such file or directory
9/10/11 9:05:09.323 PM com.apple.launchd.peruser.502 (io.redis.redis-server[275]) Exited with code: 1
9/10/11 9:05:09.324 PM com.apple.launchd.peruser.502 (io.redis.redis-server) Throttling respawn: Will start in 10 seconds
9/10/11 9:05:09.494 PM prl_naptd Starting Parallels Network Daemon
9/10/11 9:05:09.496 PM com.parallels.vm.prl_pcproxy QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
9/10/11 9:05:09.496 PM com.parallels.vm.prl_pcproxy QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
9/10/11 9:05:09.556 PM com.apple.dock.extra Could not connect the action buttonPressed: to target of class NSApplication
9/10/11 9:05:09.560 PM com.apple.dock.extra 2011-09-10 21:05:09.540 com.apple.dock.extra[251:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/10/11 9:05:09.561 PM com.apple.dock.extra Could not connect the action buttonPressed: to target of class NSApplication
9/10/11 9:05:09.562 PM com.apple.dock.extra 2011-09-10 21:05:09.560 com.apple.dock.extra[251:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/10/11 9:05:09.563 PM com.apple.dock.extra Could not connect the action buttonPressed: to target of class NSApplication
9/10/11 9:05:09.568 PM com.apple.dock.extra 2011-09-10 21:05:09.561 com.apple.dock.extra[251:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/10/11 9:05:09.569 PM com.apple.dock.extra 2011-09-10 21:05:09.568 com.apple.dock.extra[251:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/10/11 9:05:09.569 PM com.apple.dock.extra Could not connect the action buttonPressed: to target of class NSApplication
9/10/11 9:05:09.746 PM 1PasswordAgent Starting 1PasswordAgent 3.8.5 #31141 built Sep 8 2011 14:47:05
9/10/11 9:05:09.757 PM 1PasswordAgent Trying to load Localizable.strings [English] from the main bundle
9/10/11 9:05:09.764 PM 1PasswordAgent Cannot find English version, using English localization for Localizable.strings
9/10/11 9:05:09.958 PM com.apple.launchd.peruser.502 ([email protected]es[277]) Exited with code: 1
9/10/11 9:05:10.000 PM kernel nstat_lookup_entry failed: 2
9/10/11 9:05:10.048 PM SystemUIServer iStat Menus loading extra - time
9/10/11 9:05:10.100 PM 1PasswordAgent reloadAllObjects
9/10/11 9:05:10.256 PM 1PasswordAgent Database (AGHtmlDatabase:file://localhost/Users/jeremiah/Dropbox/1Password.agilekeychain /) load time [Cache]: 0.099+0.003 (377 objects)
9/10/11 9:05:10.000 PM kernel nstat_lookup_entry failed: 2
9/10/11 9:05:10.436 PM sudo root : TTY=unknown ; PWD=/ ; USER=jeremiah ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
9/10/11 9:05:10.523 PM sudo root : TTY=unknown ; PWD=/ ; USER=jeremiah ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
9/10/11 9:05:10.576 PM configd network configuration changed.
9/10/11 9:05:10.595 PM TabletDriver Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
9/10/11 9:05:10.596 PM com.wacom.pentablet Sep 10 21:05:10 A-Tiny-Goat.local TabletDriver[266] <Error>: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
9/10/11 9:05:10.627 PM gnu.emacs.daemon ("/Applications/Emacs.app/Contents/MacOS/Emacs")
9/10/11 9:05:10.654 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - Probe
9/10/11 9:05:10.655 PM UserEventAgent CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
9/10/11 9:05:10.656 PM UserEventAgent CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Carl's World 5GHz because it is protected and not on the exception list
9/10/11 9:05:10.660 PM UserEventAgent CaptiveNetworkSupport:CaptivePublishState:1211 en0 - Unknown
9/10/11 9:05:10.669 PM configd network configuration changed.
9/10/11 9:05:10.730 PM TabletDriver Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app
9/10/11 9:05:10.732 PM com.wacom.wacomtablet Sep 10 21:05:10 A-Tiny-Goat.local TabletDriver[265] <Error>: Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app
9/10/11 9:05:10.769 PM com.apple.launchd.peruser.502 ([0x0-0x1f01f].com.wacom.TabletDriver[294]) The following job tried to hijack the service "com.wacom.CoordinatorMessageServer" from this job: [0x0-0x20020].com.wacom.TabletDriver
9/10/11 9:05:10.984 PM [0x0-0x18018].com.smileonmymac.textexpander.MacAppStore No matching processes belonging to you were found
9/10/11 9:05:12.093 PM TextExpander textexpanderd 3.3.2 at your service
9/10/11 9:05:12.614 PM org.postgresql.postgres LOG: database system was shut down at 2011-09-09 10:21:55 PDT
9/10/11 9:05:12.984 PM Google Chrome CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/10/11 9:05:12.987 PM Google Chrome CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/10/11 9:05:12.990 PM Google Chrome CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/10/11 9:05:13.000 PM kernel nstat_lookup_entry failed: 2
9/10/11 9:05:13.027 PM org.postgresql.postgres LOG: database system is ready to accept connections
9/10/11 9:05:13.027 PM org.postgresql.postgres LOG: autovacuum launcher started
9/10/11 9:05:13.379 PM SystemUIServer iStat Menus loading extra - battery
9/10/11 9:05:13.382 PM gnu.emacs.daemon Loading /Users/jeremiah/.recentf...
9/10/11 9:05:13.383 PM gnu.emacs.daemon Loading /Users/jeremiah/.recentf...done
9/10/11 9:05:13.384 PM gnu.emacs.daemon Cleaning up the recentf list...
9/10/11 9:05:13.432 PM gnu.emacs.daemon File /Users/jeremiah/Documents/dotnetrocks.md removed from the recentf list
9/10/11 9:05:13.448 PM gnu.emacs.daemon Cleaning up the recentf list...done (1 removed)
9/10/11 9:05:13.817 PM com.apple.launchd.peruser.502 ([0x0-0x1f01f].com.wacom.TabletDriver[294]) Exited: Terminated: 15
9/10/11 9:05:13.909 PM gnu.emacs.daemon Ido mode enabled
9/10/11 9:05:13.981 PM gnu.emacs.daemon Loading /Users/jeremiah/.emacs.d/loaddefs.el (source)...
9/10/11 9:05:13.991 PM gnu.emacs.daemon Loading /Users/jeremiah/.emacs.d/loaddefs.el (source)...done
9/10/11 9:05:13.992 PM gnu.emacs.daemon Loading /Users/jeremiah/.emacs.d/custom.el (source)...
9/10/11 9:05:13.995 PM gnu.emacs.daemon Loading /Users/jeremiah/.emacs.d/custom.el (source)...done
9/10/11 9:05:14.498 PM [0x0-0x1c01c].com.google.Chrome [302:263:17011656063:ERROR:renderer_gl_context.cc(430)] Invalid surface handle for onscreen context.
9/10/11 9:05:14.841 PM TabletDriver Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
9/10/11 9:05:14.842 PM com.wacom.pentablet Sep 10 21:05:14 A-Tiny-Goat.local TabletDriver[266] <Error>: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
9/10/11 9:05:15.213 PM Mail Using V2 Layout
9/10/11 9:05:16.252 PM gnu.emacs.daemon OVERVIEW
9/10/11 9:05:16.410 PM gnu.emacs.daemon Starting new Ispell process [american] ...
9/10/11 9:05:16.697 PM gnu.emacs.daemon Starting Emacs daemon.
9/10/11 9:05:16.761 PM UserEventAgent ServermgrdRegistration cannot load config data
9/10/11 9:05:16.761 PM UserEventAgent ServermgrdRegistration oldConfig is nil during net changed notification
9/10/11 9:05:17.877 PM Mail [ASP] AttachmentScannerPlugin registered with Mail
9/10/11 9:05:17.878 PM Mail [ASP] Using Snow Leopard compatibility mode.
9/10/11 9:05:18.024 PM mds (Normal) FMW: DOUBLE SLASH Delete - p:341 ac:3 am:5c1 t:20534391410
9/10/11 9:05:18.079 PM com.apple.Finder Dropbox: Entered INJECT_pthread_entry
9/10/11 9:05:18.079 PM com.apple.Finder Dropbox: Installing event loop timer
9/10/11 9:05:18.079 PM com.apple.Finder Dropbox: proc: 0x10e39ae5b
9/10/11 9:05:18.079 PM com.apple.Finder Dropbox: upp: 0x10e39ae5b
9/10/11 9:05:18.079 PM com.apple.Finder Dropbox: InstallEventLoopTimer: 0x7fff8abba9d2
9/10/11 9:05:18.079 PM com.apple.Finder Dropbox: GetMainEventLoop: 0x7fff8ab7b989
9/10/11 9:05:18.079 PM com.apple.Finder Dropbox: timer installed!
9/10/11 9:05:18.079 PM com.apple.Finder Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u502/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
9/10/11 9:05:18.081 PM com.apple.Finder module initializer in main thread?: 1
9/10/11 9:05:18.081 PM com.apple.Finder Dropbox: dlopen returned: 0x7fab10699930
9/10/11 9:05:18.934 PM FDERecoveryAgent Waiting for CoreStorage encryption be activated, will try again in 20 seconds
9/10/11 9:05:20.421 PM com.apple.loginwindow A Tiny Goat
9/10/11 9:05:21.291 PM configd network configuration changed.
9/10/11 9:05:30.345 PM UserEventAgent servermgr_certs[16] -[CertsRequestHandler(HelperAdditions) identitiesFromKeychain:]: SecItemCopyMatching (err = -25300)
9/10/11 9:05:30.348 PM com.apple.UserEventAgent-System SecItemCopyMatching: The specified item could not be found in the keychain.
9/10/11 9:05:30.353 PM UserEventAgent servermgr_certs[16] -[CertsRequestHandler(HelperAdditions) identitiesFromKeychain:]: SecItemCopyMatching (err = -25300)
9/10/11 9:05:30.353 PM com.apple.UserEventAgent-System SecItemCopyMatching: The specified item could not be found in the keychain.
9/10/11 9:05:30.354 PM UserEventAgent CertsKeychainMonitor: ready to process keychain & timer events
9/10/11 9:05:32.380 PM Safari CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/10/11 9:05:32.381 PM Safari CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/10/11 9:05:32.381 PM Safari CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
9/10/11 9:05:33.420 PM 1PasswordAgent reloadAllObjects
9/10/11 9:05:33.462 PM 1PasswordAgent Failed to load object from file 'file://localhost/Users/jeremiah/Dropbox/1Password.agilekeychain/data/default/4 8167612E3394188A0FC891E83A5A725.1password': Error Domain=NSCocoaErrorDomain Code=260 "The file “48167612E3394188A0FC891E83A5A725.1password” couldn’t be opened because there is no such file." UserInfo=0x101b8f4a0 {NSFilePath=/Users/jeremiah/Dropbox/1Password.agilekeychain/data/default/481676 12E3394188A0FC891E83A5A725.1password, NSUnderlyingError=0x101b8f400 "The operation couldn’t be completed. No such file or directory"}
9/10/11 9:05:33.495 PM 1PasswordAgent Failed to load object from file 'file://localhost/Users/jeremiah/Dropbox/1Password.agilekeychain/data/default/5 C60154289B04760A90AA5898823239D.1password': Error Domain=NSCocoaErrorDomain Code=260 "The file “5C60154289B04760A90AA5898823239D.1password” couldn’t be opened because there is no such file." UserInfo=0x101b9f890 {NSFilePath=/Users/jeremiah/Dropbox/1Password.agilekeychain/data/default/5C6015 4289B04760A90AA5898823239D.1password, NSUnderlyingError=0x101b9f7f0 "The operation couldn’t be completed. No such file or directory"}
9/10/11 9:05:33.625 PM 1PasswordAgent Database (AGHtmlDatabase:file://localhost/Users/jeremiah/Dropbox/1Password.agilekeychain /) load time [NSOperationQueue]: 0.113+0.092 (372 objects)
9/10/11 9:05:36.211 PM UserEventAgent ServermgrdRegistration cannot load config data
9/10/11 9:05:36.211 PM UserEventAgent ServermgrdRegistration olI'm experiencing the same problem. I've called AppleCare repeatedly for a solutiuon, but I haven't gotten an answer yet and like you above I removed just about anything I could think of. I'd like to start considering third party apps we might have installed that maybe to blame.
Why? Because I installed a fresh copy of Lion onto a Class 10 SD card and then later I turned on full disk encryption there. I no longer experienced the problem after I booted from that card.
I also experienced a problem with full disk encryption with my 2010 MacBook Air sitting doing nothing at the encryption login screen. It spontaneously restarted three times before I turned it off. Later I moved to a 2011 model and did not see the spontaneously restarts again.
Now I'm stuck with this annoying double login. -
Need help about boot SUNFIRE V120
Hi all....
I need help about how to change boot from boot net to boot disk....
after i installed sun solaris 10 at my sunfire v120, then reboot the machine ... this sunfire still boot from net not from disk...
can i change it?
please i really need help ....
thanksIf its booted, try "eeprom boot-device=disk"
If your at the OBP, "setenv boot-device disk".
If that doesnt work check the value of "diag-switch?".
It could be booting off the the diag-device instead -
New External Monitor for Logic on MacBook Pro - Suggestions
I'm in the painful process of updating my studio and now my large screen external monitor has started failing.
I know if this a pretty general question more suited to the MacBook Pro forum but I'd like some input from folks used to working with an application like Logic in a home studio environment.
I guess the issue for me is that I'm not getting any younger and my eyesight isn't what it used to be. One of the things specific to Logic and music software in general is that there are LOTS of very detailed dialog boxes with text that is not always height adjustable (yes I know about zooming and indeed I do lots of that but it gets quite distracting). The other factor is that I'm often recording and engineering myself which means I'll be sitting with a guitar in my lap or at a keyboard and can't always lean in too close to the monitor.
I solved this by buying a large 26" Acer which sits on my desk behind the Mackie MCU. To my left I've got the MacBook 15.4" Pro on a keyboard stand above my MIDI controller at a 45 degree angle to the desk.
It's worked quite well until the Acer seems to have become haunted. It will mysteriously reboot itself intermittently, going blank for a second, then showing the Acer logo and going back to picture. It will also turn itself on spontaneously when the computer is off (the status light is off and then turns itself on). It seems to detect when I'm in the middle of a really good session and starts resetting itself every 30 seconds or so. Then it will work fine sometimes for days or weeks at a time. I've checked it on 4 different computers, it malfunctions on all. I believe in may be a problem with one of the capacitors or the inverter, I'm not sure, but it's driving CRAZY at this point.
And of course now it's 3 months out of warranty and may be more expensive to fix than buying a new one.
So my issue is what monitor to replace it with. I've considered buying an Apple monitor, since the display is lovely to look at but there are a couple things that are deal breakers.
It's expensive. Very expensive.
Oddly you have to choose between a 24" and a 30", with nothing in between. Don't want to sound like Goldilocks here, but the 24 is tooooo small and the 30 is tooooo big.
Yeah I know bigger is usually better but since they bumped the native resolution of the 30" up to 2560x1600 it's really sharp but things like the menu text get really quite small. Yes you can reset to a lower non native resolution, but then you loose the sharpness. I tested Logic in the store on the 30" and it did look great but I found I actually had to move my whole body around to see things at the top and bottom of the screen.
Oh and did I mention that it's expensive? Jeez.
The 24" now seems to look a bit small to me after using the same resolution (1920x1200) on the Acer's 26" screen. (Ok, I think it's actually 25.5 but hey that half an inch can make a big difference and I will avoid making any bad jokes here).
And did I mention the Apple monitors are expensive? The 24" is almost 3 times as expensive as a cheaper alternative.
I also still have a PC here that I use (sorry) and the Apple monitors have very limited connectivity. So I think unfortunately the Apple monitors are out for me.
So I;m down to a couple other non Apple options. I will not buy an Acer again since I believe now that their quality control is not good and their support is absolutely atrocious. Shame I used to be a big fan of Acer PC's, but after owning a couple I'm steering clear.
My biggest issue right now is that most of the new budget monitors are geared toward 1080p HD uses so they are they are maxing out at 1920x1080 (16:9 aspect ratio instead of 1920x1200's 16:10). So the tradeoff here is that HD movies will look better in 16:9, but 16:10 gives you "squarer" pixels and more vertical resolution for screen hungry apps like Logic.
Any opinions on this? I'm a bit new to the Mac so I don't know if I'm really better off going with a 1920x1200 screen like the Apple monitors.
Also, I know this may just be a bug in the Acer's scaling, but if I switch to 1920x1080, I lose the menus off the top of the screen or if I adjust the vpos I lose the dock at the bottom. Downscaling to 1600x1050 or even 1024x768 works fine. If I get a 1080 screen and set the resolution appropriately will it work correctly and without too much distortion?
I'm also curious what is the best way to hook up the monitor? I'm currently using the DVI to VGA adapter that came with the MacBook. My Pro is the slighter older silver keyboard model so it has the standard DVI out. Will I see any real improvement by going over to using DVI directly?
Also I'm wondering how people feel about glossy vs matte for music. My current displays are the non-glossy and I do think I prefer them for detail work.
The candidates right now are
Hanns-G HH-281HPB 28" @300$. It's one of the only budget monitors that uses 1920x1200. All the right inputs (DVI, VGA). I'm just afraid this might be a bit too good to be true. It's really cheap and after having problems with a "cheap" Acer (although it wasn't so cheap 3 years ago!) I don't want similar problems. Stand has no swivel or tilt (a big problem for my use). Also that resolution on such a big screen might be good for me or it might look grainy I don't know I haven't seen it. Anybody have any experience with these?
Samsung P2770H 27" @339 Looks nice, good color. Sadly only 1080 native resolution. Stand doesn't swivel, but does tilt. No VGA input, so won't work with my old PC (although strangely it says it comes with a VGA cable). They get generally good reviews and I know Samsung makes very good flat panel TV's.
ViewSonic X Series VX2739WM 27" @350. Once again maxes out at 1080. It's fast (1ms), has VGA input. I've never been a big fan of ViewSonic but they do seem to have gotten better color-wise. Tilt no swivel and it's anti-glare (not sure this is a plus).
There are also similar options from HP, Asus, LG and Sceptre but they are all 1080. In fact outside of the Apples, the Hanns-G and a few expensive monitors from NEC they all seem to be 1080. So if I really want the 1200 the Hanns-G seems like the only way to go.
Any input here would be greatly appreciated.No doubt, the Apple displays are gorgeous. The first time I saw the 30" display wow, I wanted one BAD and it's actually what prompted me to buy a "big" monitor. The colors are great with a rich wonderful saturation level and as usual for Apple the form factor design is stunning. You know for that picture quality I could even get over the sticker shock and save up for one.
Which is why I was so disappointed when I actually sat down in the store and started to use Logic on one. I imagine for doing video work, graphic design or darn near anything else, it would be great. But for Logic I just found myself bending and twisting trying to look at toolbar at the bottom and then up to look at the menus. And instrument or plugin displays that were hard coded to look OK at lower resolutions looked really, really tiny to me. For me and particularly using Logic having 2 slightly smaller displays at a 45 degree angle makes more sense.
And once again the 24 seems just a bit small. I don't understand why they have a 27" iMac but you can't buy a 27" display. So iMac 27" starting at 1699, subtract out the cost of the CPU and drive ie the Mini and I'd really buy one. Strangely you can buy a 21.5" or a 27" iMac. Or you can buy a 24" or 30" display. Hmmmm.
So don't get me wrong I'm not bashing Apple for being expensive. They put a lot of money into R&D and into really thinking about the form and the function of their products. As a recent convert from being a PC developer for 25+ years, hey I've more than sipped the Kool-Aid here, I've guzzled it. They make great products and yeah they're more expensive, because they ARE better! I've now got 2 MBP's, 2 iPods, I'm about to get an iPhone (silly "death grip" or not) and I really want an iPad. Heck I'd really love an 8 core MacPro if I could afford one (alas I can't).
I guess my only gripe here is that there always seems to be a little less choice in the Apple world. Yeah, I know they do a lot less volume than the PC clone world I just think that they always seem to have a big gap between the high end and low end with not enough in between. So you can choose between the lower end and one piece units with no expansion boards (the mini or the iMac) or go straight to monster tower MacPro (way over 3K with display). You can get a MacBook but then you have to put up with a small screen or go with MacBook Pro, which let's face it is a lot of computing power for someone who just wants to web surf and write some email without squinting.
So here I am stuck in the middle. I don't want to buy a HannspreeQG or another piece of junk that's going to last 3 years and 3 months because of a crappy $2 capacitor that no seems to able to fix or care about fixing. I'd like to buy a really nice Apple monitor, I just want a big monitor, not a huge one and not a "medium" one (I know I'm spoiled but 24" seems "medium" these days).
Sorry about the rant here but my monitor is shutting down every 30 seconds and I'm about to go completely insane and toss it out the window!!!
Really glad to hear about that 84' VGA cable. I never imagined such a thing existed or would work without some sort of signal boost on the way. Very cool for me. My electronic drum kit is in another room and I would love to have a small cheap monitor next to it for sequencing. I had my laptop on a stand next to it for a while but I began to get terrified that I'd let a drumstick slip and destroy my laptop screen. That would be a very bad thing. Thanks for the tip. -
Let me start off by saying that the Mega 180 is a great idea for a product but unfortunately it is not finished. MSI is using us as beta testers - at our expense. I build computers for people as a side business and against my better judgement, I built a customer a Mega 180 based system and I've had nothing but problems with it and it's damaging my reputation. But, OK enough of that.
One major problem with the Mega 180 is it's CPU and hard drive temp and here's what you can do to fix it. First off, the CPU heat sink is nice and big and made of copper - very nice. However, the underside of the sink (the part that touches the CPU) is absolutely aweful! The bottom should be mirror smooth. Mine looks like the surface of a record. Therefore, you need to lap it. Look this process up on the net to see exactly how to do it. Once lapped and the bottom is mirror smooth and you can see your reflection, use ARTIC SILVER thermal grease (just a tiny bit) and put the sink back on. Your CPU temp under load will be about 8 degrees cooler. Next, replace the small fan on the cooler with a bigger one (make sure you use one that's sensored, like the one you're replacing). Lastly, get some flexible ducting from the hardware store (plastic, not aluminum), attach one end over the sink's big fan and carefuly route the other end to the side of the case (may not be possible if you are using an AGP card) and position it so it sucks in outside air. Now that your CPU is cooled with fresh air, you will see another 2 - 3 degree reduction of CPU temp.
Finally, the hard drive is way too hot. I measured it with a IR temp meter after a full defrag and my jaw hit the ground when I saw how hot it was - 152 degrees F. That type of temp will kill your hard drive. Fix this by placing a fan inside the case (RAM side) blowing fresh air right onto the hard drive. This brought the temp down significantly. It also cooled other items too (CD drive, chipset).
The only downside to this is your system will be louder due to fan noise. However you will have fewer system lock-ups and mystery reboots (caused by overheated components).
One last idea, if the case is just too cramped for you, remove the power supply, buy a new one and mount it outside the case on the back. It doesn't look good but it sure frees up space and improves air flow (plus you'll have more power if you buy a higher watt supply).
Peace!Hey cb31,
Even though this thread is about temps, I too think noise is the biggest problem with the Mega, and my current efforts are targeted at killing the constant background noise. My goal is the same as your's - I want to leave the computer on most of the time and not be bothered with it.
I'm proceeding slowly however, and so far I've only done the following:
-Replaced the 60mm Delta fan with a Papst of the exact same size. I found the Delta to be noisy, while others report that it's doing ok. Don't know about you... The Papst is really quiet and actually cools a little bit more effective, though that's a bonus feature! But on the overall it didn't have the effect I hoped for
-The smaller Delta fan (outtake side of heatsink) already is quiet enough, so doesn't need to be replaced on behalf of noise anyway...
-Took out the PSU and put White Lithium Grease in the fan for smoother operation since I figured it made a lot of noise. That didn't help much either... I'm thinking about replacing the PSU fan with something better, even though a lable on the back of the PSU states "W/ Noisekiller". It's still a no-name fan and can be improved upon.
Right now the loudest noise in my Mega doesn't seem to come from any fan at all, but rather from the hd. And it's not so much the actual noise from the unit as vibrations reverberating through the chassis. A common problem obviously, but there isn't any room for hd suspension systems in the Mega, so other actions are required here! I tried to slide in thin sheets of plastic between the drive and the cage, to act as silencers, but that didn't have any real effect as the cage touches the drive in several places, thus transfering the vibrations anyway. A new drive cage could do the trick, but I haven't gotten that far yet, and might not ever...
The Seagate Barracuda is considered to be a silent drive, so replacing it probably wouldn't help.
To conclude: If your fans are noisy, replace them or grease them for better operation, but you might not even hear the difference...
The major flaw seems to be the internal design of the Mega, and there's isn't much to be done about that, unless you're handy with a Dremel and sheets of metal. I might be, but I will have to get back to you on that!
Cheers!
-M -
Never done this before. My Apple TV was perfect until I installed Mountain Lion. Upon syncing my Apple tv, it mysteriously rebooted, asking me language and tv type. Then the Apple comes on, flashing light, and back to language. Apple said hey no longer support it, though it is not very old. Wasted $399. I had ips 180 g almost full of movies, pics, etc. that are now gone. What can I do? Very unhappy with Apple, now.
You can buy Microsoft Office for Mac, it includes Word, Excel and Powerpoint. Or you can download a free copy of LibreOffice which contains substitutes (good ones) for the Microsoft Office programs.
Do not even think of using Boot Camp unless you have a complete and current TM backup or a clone to restore if it goes wrong. You will also need to buy Windows and Microsoft Office for it. And you MUST read the directions very carefully. -
Unknow Panic error, please help!
My Xserve mysteriously rebooted itself over the weekend and produced this panic report:
*panic(cpu 0 caller 0x001FA14B): "jnl: checkfreespace: tr starting @ 0x8000000000006000 not flushing (jnl 0x6b8af00).\n"@/SourceCache/xnu/xnu-1228.5.20/bsd/vfs/vfs_journal.c:2087*
*Backtrace, Format - Frame : Return Address (4 potential args on stack)*
*0x5becbad8 : 0x12b0fa (0x4592a4 0x5becbb0c 0x133243 0x0)*
*0x5becbb28 : 0x1fa14b (0x46af8c 0x6000 0x80000000 0x6b8af00)*
*0x5becbbb8 : 0x1fbfb4 (0x6b8af00 0x6b90ee0 0x0 0x0)*
*0x5becbbf8 : 0x3391ff (0x6b8af00 0x69acbb4 0x5becbc28 0x3e8cc7)*
*0x5becbc28 : 0x33e419 (0x69ac804 0xa4d6420 0x9bafb00 0x0)*
*0x5becbd28 : 0x33ee98 (0xcf74a70 0x0 0xc0b7280 0x2)*
*0x5becbdb8 : 0x32ff5d (0xcf74a70 0x2 0x0 0x6bbce10)*
*0x5becbde8 : 0x1de25b (0xcf74a70 0x5becbe70 0x5becbe38 0x19db45)*
*0x5becbe38 : 0x333a3b (0x683ab90 0x0 0x32fedd 0x5becbe70)*
*0x5becbea8 : 0x1f6afa (0x683ab90 0x2 0x70194c4 0x1f60b3)*
*0x5becbee8 : 0x1e051c (0x683ab90 0x2 0x70194c4 0x12)*
*0x5becbf08 : 0x1db2ed (0x683ab90 0x0 0x1 0x136a32)*
*0x5becbf48 : 0x1e0551 (0x1 0x1e04e4 0x0 0x138f71)*
*0x5becbf78 : 0x3ddde2 (0x6bbce10 0x70193c0 0x7019404 0x7037998)*
*0x5becbfc8 : 0x19f2c3 (0x6ff9520 0x1 0x1a20b5 0x6587e40)*
*No mapping exists for frame pointer*
*Backtrace terminated-invalid frame pointer 0xbfffff18*
*BSD process name corresponding to current thread: update*
*Mac OS version:*
9E17
*Kernel version:*
*Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386*
*System model name: Xserve2,1 (Mac-F42289C8)*
I have already performed a AHT and found no errors. Server monitor and RAID utility check out normal. I've patched it to the latest firmware update as well.
Any help or advice would get greatly appreciated!Hello, that is a RAM ECC error I think, though of course logic board coulld be at fault...
IA32_MC0_ADDR(0x402): 0x0001ff80002904d0
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
One RAM slot is reporting good, 7 bad.
Have you blown the dust o9ut & reseated the RAM?
https://discussions.apple.com/thread/3104175?start=0&tstart=0 -
Unable to make tWo concurrent logins to the firewire Hard Disk from RHEL 3.
Hello
I tried setting up a firewire(shared storage) ORACLE 10 G RAC CLUSTER using OCFS/ASM using your install guidelines
but this failed.Below is the scenario.
Hardware : compaq intel PC's with 1 GB RAM
Members in the cluster : Two
Operating system : RHEL AS 3 / FEDORA CORE -3 (both being tried one after the other)
Oracle 10G RAC version : 10.1.0.3.0
HDD : Maxtor one touch II 250 GB with combo interface Firewire/USB 2.0
N/W Adapters : Two public interconnect,Two private interconnect thru 10/100 internet Hubs/switches
Firewire card details: FireWire (IEEE 1394): Agere Systems (former Lucent Microelectronics) FW323 (rev 05)
Failure Description
I successfully loaded the drivers for the Maxtor one touch II in the two Linux (RHEL 3) boxes. But after a restart, at any point of time,
the disk is detected only by one node. It is detected in the other node only if the first node is powered OFF. On investigating we found the
following error message by running "dmesg | grep sbp2" command as root
ieee1394: sbp2: Query logins to SBP-2 device successful
ieee1394: sbp2: Maximum concurrent logins supported: 2
ieee1394: sbp2: Number of active logins: 1
ieee1394: sbp2: Error logging into SBP-2 device - login failed
Please do suggest where i was wrong and how to proceed next.
Thanks & Regards
RaghavanHello All,
I work as the system admin for Raghavan. Thanks to all those who took time to reply to our queries. Sorry for the lengthy mail. Let me go through the whole sequence of what we did initially.
1. Installed RHEL 3 with Agere PCI Firewire cards.
2. Installed Firewire Kernel kernel-2.4.21-27.0.2.ELorafw1 on top of it.
3. Modules were loaded properly and the Firewire hard disk was accessible from both the nodes.
4. Everything went fine during OCFS and ASM installation.
5. We were installing the CRS and that too went fine till 99% and the final step of running the root.sh in one of the nodes gave an error message as follows
"Failure at final check of Oracle CRS Stack
0"
6. So we thought of reinstalling CRS and deleted the Voting disk file directly from the shared disk. We deleted the file manually from one of the nodes using the "rm -rf" command and that too before uninstalling OCFS.
Now both the disks went out of sync. The voting disk and CRS file was still visible from the other node. So we did a reboot of both the nodes one by one. After this MYSTERIOUS reboot at any point of time only one node was able to detect the hard disk.
Finally after nearly two months of head scratching (really lost lot of my hair in this :)) we were able to get concurrent logins from both the nodes now! Thanks to the reply by Member no 279089. I bought and installed a TI(TSB43AB23)card on one node and a VIA chipset card on the other. And finally the magic worked. I am able to partition the disk and the partitions are visible from both the nodes.
But now we have a new problem. When we invoke the OCFSTOOL from one node (VIA card node), the previous OCFS partion (the one which was done before the MYSTERIOUS reboot) is still shown. I removed the /etc/ocfs.conf file and still it is being shown in the ocfstool. I tried to ignore this and continued creating the OCFS partition from the other node (TI card node) using the mkfs.ocfs command. That too ran fine without any error messages and was able to mount it under /u02/oradata/orcl. When I try to mount the partition from VIA card node it is giving me the following error
# mount -t ocfs /dev/sdb1 /u02/oradata/orcl
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, or too many mounted file systems
I get the following in /var/log/messages
Jun 29 21:16:40 testrac1 kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 8000000
Jun 29 21:16:40 testrac1 kernel: Current sd08:11: sense key None
Jun 29 21:16:40 testrac1 kernel: I/O error: dev 08:11, sector 69
I tried googling with the above error message and they seem to point hands towards VIA chipsets. But I am not sure. Please guide us on what needs to be done to resolve this issue if you have faced it before.
Thanks in Advance
Jei -
Why is my Epson Stylis Photo R300 not reconized?
I installed Leopard on my iMac 17" 1 gh machine. Epson drivers are listed to this printer. However, when I go to ADD printer all I get is a Firewire option, NOT the USB option.
I did find a USB plugin in a library folder, but don't know where that should be moved to for it to show up as a selection....
Anyone with some help??
TIA
BobProblem resolved by a mystery reboot. (this hadn't worked before, but this time everything is ok). Go figure!!
-
Unexpected various shutdowns of my macbook, I do not have any clue...
Hi guys,
I already read through the forum, but I wasn't quite sure if my problem was solved.
The thing is that my macbook often shuts down without any clear reason. It often happened while I watched a movie or a youtube video. But even when I worked with keynote it just rebooted. I didnt had any other programs running in the background.
Once it happened that a window popped open and said that I have to restart my macbook.
It also happened that it just borke down. I made a photo:
http://img402.imageshack.us/my.php?image=img3670sd1.jpg
And then there are those mysterious reboots without any warning message or anything else. It just reboots for now particular reason.
Anyway, a friend of my is an IT student and we tried to watch the temperature of the CPUs. After I opened itunes visualizer or a youtube video the temperature was about 70 - 75° celsius. At this time I had safari open with about 4 tabs and mail, neo-office(no file opened! just idle!) calendar.
We didn't want to go further. We do not know what it is exactly, graphic card, mainboard? But I ned a solution... thank you!
I bought my macbook in october, pretty at the end of it. Got it in novemer. Those strange things happened sometimes but I could not work at the university without a computer which is the reason I reacted so late.
MB 2.2. ghz + 1 gb 667 mhz ddr2 sdram with the new graphic chip they built in in the end of octobre.
thanks again.
Benny
P.S.: postet it in bluetooth, ram etc. as well for a mistake, i hope that there are more people here in this forum who can help me. I apologize therefore for doubleposting.I just remembered that I had the same problem with my old desktop PC (windows) and my CPU fan. After I startet a game / movie the PC lagged enormously or even rebooted.
I called AppleCare telling them my problem and my experience with that but they said I am not in the free telephone support (90 days) anymore. They wanted to make me pay 50 € for the support or by the AppleCare program for 319 €, because they said "they can not be sure whether the problem is not a software issue."
I decided to bring my macbook to a service provider near my town, hoping the can fix my problem...
I have to say I am diappointed about the support strategy apple has.
I have my fan now on 2500 rpm and readjusted NVRAM and PRAM.
If you have any more ideas, please tell me. I would appreaciate your suggestions. -
I've had my Mini (Late 2012, 2.3, i7, fusion drive) a couple of weeks now and I love it.
One thing, though. I hear a slight buzz from the Mini when I, for example, move to a website in Safari, or scroll down my inbox in Mail.
I know sounds are hard to describe, but a low-volume short buzz is how it seems to me. It's not loud, but it's there. I'm assuming it's some kind of disc noise. I'm moving on from an old iMac, and I don't recall any particular disc noises from that.
You know how it is when you have a new machine and you're hyper-sensitive. So, is it normal?Rule of thumb: Any time an otherwise inexplicable event occurs with a computer, like a mysterious sound, all o fus immediately become hyper-aware and symptoms/sounds we would otherwise never notice start to sound like a rock concert at full volume. That does not necessarily mean there isn't a problem, but it may help put it in perspective.
At this point, I presume you want to prove/disporve that there is a serious problem in your Mac mini -- correct? That means it is essential to isolate the source of the noise and that means you are going to have to do some serious troubleshooting. The noise you have described could be several things including a cooling fan brushing against its housing, a rough bearing causing a vibration perfhaps at a given rpm, an HDD problem as yet unidentified, etc. Identifying this kind of problem, if indeed it is a problem, is a tedious step-by step process. It is important that you only do one thing at a time or you risk never identifying the issue.
The process starts by reviewing what you do and do not know.
You do NOT know whether or not the sound is indicative of a real problem.
You have no indication of data loss, the Mac mini is not mysteriously rebooting, no clicks or pops followed by a flash on the monitor, no blue screen of death, etc.
You DO know that you do not hear the sound when booted in the safe mode. That would tend to indicate the problem is related to software, but NOT the system software. Booting in safe mode...
loads only required kernel extensions (some of the items in System/Library/Extensions).
disables all fonts other than those in /System/Library/Fonts
It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501.
disables all startup items and any Login Items.
You do NOT know if the sound is related to the Fusion drive, but that is your fear. There is a way of pretty well clearing the HDD as a source of the problem but it requires a third party testing utility that costs about $100. The best indicator of impending HDD failure is to perform a surface scan of the the entire drive. There are three utilities that will do this: Micromat's TechTool Pro or Checkmate (Checkmate is purely a test utility and performs no repairs, TechTool Pro is a volume repair utility as well, but AFAIK the repair functions have not yet been validated on a Fusion drive) or Prosoft Engineering's Drive Genius (in addition to doing a surface scan, DG also has a HD "stress test" that will wring out a drives mechanical functions pretty well).
Assuming the noise is somehow software related the testing is free but time consuming.
Narrow the scope of your search by determining if the problem is something in your user account or is at the system level. You do this by creating a Test account (If you d not have one
go to System Preferences > Users & Groups, click on the padlock at the bottom of the window and enter your administrative password,
then click on the Plus sign to create the test account).
Boot into that account and see if the sound is heard. If it is then the problem is in the System area, if not it is something in your user account.
If it is in your user account,
Repeat the System Preferences steps
Select you user account and click on the Login items bar
One at a time,
Delete a login item
Quit System Preferences
Reboot your system
listen for the noise.
If the noise is heard go back to system preferences, reinstall the deleted login item, and go back to step 2.3.1.
If the noise is NOT heard you have identified a potential souuce of the problem. Be sure the item is still needed and if not delete it, If it is still needed check with the vendor to see if there is later version.
If it is in the System area:
In the Library folder at the root of your HDD find the LaunchDaemons folder and one at a time
Drag the LaunchDaemon to the desktop
Reboot and listen for the sound
If you still hear it, replace the LaunchDaemon in hte LaunchDaemons folder and go back to step 3.1.1.
If the noise is NOT heard you have identified a potential souuce of the problem. Be sure the item is still needed and if not delete it, If it is still needed check with the vendor to see if there is later version.
Repeat this process in the StartupItems folder
If you still have not found a source of the problem try instrumenting your system as I suggested in a previous post and watching fan speeds when the sound occurs. -
Hi all, I have been reading this board since I decided to get the Droid X and have learned a lot. Thank you. I got my phone brand new 8 days ago. I have had a few issues that I have noticed are fairly common but I thought I would post as much detail as I could to see if I have a setting or something that is causing these problems before I try to exchange the phone for another X. I don't want to wait too long for warranty sake.
1. The day I brought my phone home, I didn't know how to wake it up so I hit the power button on the top and accidentally powered it off. For the next hour it kept powering itself on and off until I took the battery out and back in. It was fine then so I put it on the charger to get a full charge before bed. I took it to bed and over 6-7 hrs it completely drained the battery and turned itself off. I put it on the charger and waited a little bit to boot it up. When I did it rebooted itself repeatedly, even dropping a two calls that came in when it was on. Pulled the battery again and it was fine. Went about 7 days with no mysterious reboots. I went to the hospital so I powered it down (using the top button) and when I turned it on it started it's rebooting cycle again until I pulled the battery. It seems I can not turn it off without having to pull the battery afterwards.
2. Battery life, I know that because this phone is so awesome, the battery is not going to last forever. That being said, a full charge on my phone lasts between 6-7 hours everytime. Right now my phone is at 40% after 3 hrs and 25 min. I have used it very little this morning. My husband got a CPO Droid X a couple of days after I got my new one and his battery is amazing. Right now it has been off the charger for 15 hrs and 19 min and still has a 60% charge left! Since his is doing so well, last night I tried to go through all of our settings and mimic his, thinking that I have something that is a huge power drain. We were basically the same already so I made a few small changes and it made no difference in battery life. The only differences right now in our phones that I can find are a few aps. He has 5 or six games and Facebook. I only have Facebook.
Here is something strange I notice while looking through our phones side by side.
Our usage statistics in the battery manager are way different.
Mine (bad battery) His (excellent battery/no odd reboots)
Android OS 88% Display 33%
Display 5% Android System 23%
Phone Idle 2% Voice Calls 21%
Android System 2% Phone Idle 11%
Swype 2% Cell Standby 9%
Cell Standby 2%
I have tried WiFi on/Wifi off and it makes no difference, I never have GPS on, I tried manually killing the aps, I've tried leaving them running. So I don't know. My gut tells me that there is some strange glitch that makes it reboot and causes the Android OS to run way to much, but I really don't know much about this phone and want to be armed if I have to go argue for a new phone. I got this phone because my BB Storm's screen quit working after an update. The techs loaded my contracts from backup assistant to my new phone, but I knew that I hadn't run that in a long time and I was missing a ton of recent contacts. I went back later with my Storm to see if they could transfer just the missing ones or delete the contacts in my X and pull all the old ones off the Storm. By the time they were done, I had three of every contact on my phone, we did a factory reset and loaded the again and when I got home, I had two of all of them again, what a pain! So anyway, I am not that confident in my local store. Plus, I have this one set up the way I like it and am not really looking forward to starting over. So if anyone has any suggestions or needs more info to help please let me know OR feel free to say that I need a new one if that's the case, I don't want to wait too long on that. I just need a little more battery than 6 hrs out of the box!
Jessica, and you are a saint if you read all this!From what I am getting from your description:
1. You are probally using a task killer (Make sure to exclude system apps and Set apps to only be killed when the backlight is powered off)
Note: Others may consider task killers are not needed but the work well for me...
2. Lower Backlight
3. Disable Wifi, GPS and bluetooth when not in use.
4. Select Performance option under Settings/ Battery Manager / Battery Mode
You can usually improve battery life if you start with these rules..
If all falls a Hard Reset my help...
This has been verified as being the best way to stop a number of the issues that has developed after doing Froyo update, the system seem to keep the app and settings during installation process and this seems to cause a number of incompatible issues with a number of devices....
Follow these settings during restore to avoid issues being restored automatically.
1. Uncheck "Back up my data" under Settings/Privacy
2. Click Factory Data Reset/Reset Phone
3. After reset is complete only Active Phone but do not input Google Email information
4. Once phone is at homepage go back into Settings/Privacy and make sure the Automatic Restore option is unchecked, even if grayed out, activate "Back up my data" and quickly disable "Automatic Restore"
5. After being sure that the Automatic Restore option is off it will be safe to log into Google and you can continue installing preferred apps and custom settings.
This process will stop all applications and settings from restoring automatically and restoring original issues that usually resolve a number of issues. -
Unexpected shutdowns of my macbook
Hi guys,
I already read through the forum, but I wasn't quite sure if my problem was solved.
The thing is that my macbook often shuts down without any clear reason. It often happened while I watched a movie or a youtube video. But even when I worked with keynote it just rebooted. I didnt had any other programs running in the background.
Once it happened that a window popped open and said that I have to restart my macbook.
It also happened that it just borke down. I made a photo:
http://img402.imageshack.us/my.php?image=img3670sd1.jpg
And then there are those mysterious reboots without any warning message or anything else. It just reboots for now particular reason.
Anyway, a friend of my is an IT student and we tried to watch the temperature of the CPUs. After I opened itunes visualizer or a youtube video the temperature was about 70 - 75° celsius. At this time I had safari open with about 4 tabs and mail, neo-office(no file opened! just idle!) calendar.
We didn't want to go further. We do not know what it is exactly, graphic card, mainboard? But I ned a solution... thank you!
I bought my macbook in october, pretty at the end of it. Got it in novemer. Those strange things happened sometimes but I could not work at the university without a computer which is the reason I reacted so late.
MB 2.2. ghz + 1 gb 667 mhz ddr2 sdram with the new graphic chip they built in in the end of octobre.
thanks again.
Benny
Edit: I somehow put it in the wrong category? I apologize... new here...
Message was edited by: embee1511I had the same exact problem. I bought my MacBook in July of last year. As of October, it would randomly reboot. I could never reproduce it on spot. It could do it 10 times in an hour, or once a week. I originally thought it had something to do with the RAM, so I replaced it, but it fixed nothing. Recently, it got so bad it became unusable. Mine's still in repair, and I'm pretty livid. Several techs at the Genius bar told me the mainboard had to be replaced, but it was probably some sort of sensor that went bad. I was pretty furious that I couldn't just get a new machine, since it was still under factory warranty. I don't know if I'm wrong in thinking that it's normal to get a replacement if something breaks within the initial warranty period, but it's what I expect. I used to sell computers and that's what our policy was. Had it been out of the factory warranty, but covered by Applecare, then I can understand having repair being the only option. I'm in the same situation, I need a computer, so...yeah...if I don't get my Macbook back from repair soon I'll be replacing it.
-
I'm proposing this as just an idea and if anyone out there is skilled with electronics it is something to consider. In fact, I may do it myself.
OK, down to business. What's the single biggest component in any Mico PC? The power supply unit (PSU). In addition, the PSU throws off alot of heat (most is vented out the back but infra-red is radiated throught the case) and is generally noisy (fans). Lastly, PSUs in micro pc's are usually underpowered. Myself, I usually put in a minimum of a 350 watt PSU when I build a PC (preferably 450W). PSUs are often ignored but believe me, a high quality PSU is critical to making a dependable PC. In fact, may PC's I've repaired that were suffering from mysterious reboots were because of low quality PSUs giving off 'dirty' power.
So here's what I'm thinking. Take the PSU out of the MEGA 180 (or any micro PC), buy a high quality, high powered PSU, and mount it remotely. All you will need to do is splice in wire b/w the PSU and the plug ends (solder and use heat shrink tubing). Then, use a wire loom to make all the power leads into one nice cable. You could place the PSU in an out of the way area. I'm thinking a lenght of about 3 feet would be great.
So what will you do with all the extra space you've created in your MEGA 180??? How about a nice big heatsink on the CPU??? Or, what about a second hard drive mounted where the PSU was? The options are endless.
I've used a PC power supply to make a regulated 12 volt power source. To see how, check out my website at http://www.e-maxximumrc.com/html/power_supply.htmlAs far as I can make out, the MSI PSU does have some 'special' outputs as the Radio and CD can be powered when the Power Supply is 'Off'.
You would just need to make a 1 to 1 cable to get the power to the Chassis and the original connectors if you were just remote mounting the MSI supply. If you did want to buy a new PSU then you would need to measure what voltages you get where with the MSI PSU 'Off' and also check that the ATX connector (and the others) are standard as I would imagine this is a Custom PSU for MSI and there is a danger that things may not be as they appear. For instance, I know that Dell have standard looking ATX PSU's but when you actually check the pinout, they are different and connect a normal PSU to a Dell system and it becomes very 'interesting' - mostly a lot of electrons escape in the form of smoke!!
Maybe you are looking for
-
I repartitioned the hard drive on a computer running only Windows 7. This was done using non Windows utilities that have proven to be very reliable in the past. The utilities in question are all on the System Rescue CD and include (GParted, and ntf
-
Closing the browser window in Java
Hi All, My wireless application works on a PDA browser. The PDA browser doesn't support javascript. When user wants to logoff from the application, he clicks on the logoff button. After clicking it the current browser window should close. I am using
-
Error 7 Build Error - File not found
I am trying to build my software to another computer over the network. I am able to access the directory I am installing to and the program is not indicating any build errors(all VI's are not broken). This error only occurs when building. Any sugges
-
How can i transfer my iphone4 content to my itune Library
How can i transfer my iphone4 content to my itune Library
-
Customize the Value of Auto generated Document ID in sharepoint library in 2013
I have a document centre with Couple of Document Libraries like Finace, HR etc. I would like to set differnt document ID for each Documents in these libraries , eg, HR documents-HR-01, Fince documets-FIN-01 etc. If I set the Docuemnt id in site setti