SunStudio debugger session exits when program finished

I'm running SunStudio 12 on a Ultra 25 with one or more projects opened.
Usually the debugging session was still available when the program execution ended.
Now, for some reason, the debugging session also exit when finishing the program.
I have to start a new dbx session after that.
A colleague of mine can debug the same executable,
but his debugging session is still available when finishing program execution.
I'm not aware of that I changed something.
Also I couldn't find any option in SunStudio that I might set wrong.
How do I come back to the previous behavior?
Regards
Peter

To control this "feature" ....
From the main menu choose Tools->Options
Select the Miscellaneous category
Turn Debugging Options
Select the Session Startup panel.
Check No for "Finish Debug Session When Program Exits.
NOTE: This property is not available in SunStudio 12 FCS, but
is available either in the later MultiLingual release and/or patches.
(I.e. what you colleague has :-)

Similar Messages

JVM not exiting when program terminates

I am developing an application that uses Frames on a pocket PC. At some certain event, I call System.Exit to close my application. However, doing this does not shutdown the JVM. Is there a way to force the JVM to exit?

Are you using j9.exe or j9w.exe to run your code? j9.exe launches a console which does not exit until the user closes it, otherwise you wouldn't be able to see your stdout after your application terminated. j9w.exe does not launch the console window.

New ABAP Debugger Session does not close after Exiting

Hi Friends,
I am working on SAP GUI 710 & ECC 6. When I am debugging, new abap debugger is opening and I can do analysis normally. When we finish the debugging and want to exit, the debugging session is not closing and i get the following message on top of beugging window "ABAP Debugger Control Session 3 (Exclisive)". I want to know if there is any settings to be done to aviod this.
Thanks.............
Regards,
Chandu

hey
check this PDF link below.
http://www.sappro.com/downloads/Settings&SystemAreas.pdf

After sorting photos into albums, the albums disappeared on me. I dragged and dropped the photos and went back to check that they were in place before exiting the program. When I went back, the folder was there but no albums. Help!

Working on an IMac - with IPhoto v.9.6
This is my first experience with IPhoto... trying to move files from a PC over to a Mac.
I don't have a ton of photos but I created about 6 albums - standard albums - and dragged and dropped individual photos into each of the albums. I named each of the albums as well so I would know what was in each. After i was finished, I created a folder called 2014 and moved each of the albums into that folder. Before moving ANY of the albums, I opened each of them up to make sure that all the photos I wanted in each were indeed there - and since there were some errors on my part, I deleted any duplicates first. SO, I KNOW the photos were actually in each of the albums BEFORE i moved them into the 2014 folder.
My intention was to then delete the photo files in my document file but once I got there I thought I would go back and double check the IPhoto file just to make sure... and the pictures were NOT in the albums where I had placed them... is there a need to save this before you move on and if so, to where and how? I was under the impression that once files were moved to albums, they remain there.
The photos are still in the photo library but unsorted now again... I cannot even open the 2014 folder at this point.
Thanks for any help!!

Was back on IPhoto this morning. The folder did not open at all so I deleted it. Beside Albums, nothing showed at all. It was like I had done no work at all except to import my photo folder. Nothing was in my trash bin either.
I started again and created one album at a time. I dragged and dropped photos into the album and exited out of IPhoto, opened up other programs and then returned to IPhoto to see if the album was still there and it was this time. I created a second album and did the same thing. This time, for some reason, the albums seem to be staying in place. I am not doing anything differently than last time. After creating three albums, I created a folder called 2014 and dragged and dropped the three albums into the folder and exited IPhoto. They were still there when I returned - YEAH! It seems to be working - for now! I am keeping my fingers crossed that my photos are not going to disappear but I am not going to delete my photo folder from my files just in case!
Thanks for the suggestions but this may just have been a funny glitch... not sure what happened. I didn't change anything or do anything differently this time except that I am doing it one album at a time and exiting the program between creating each of them and coming back to check... very strange.

Hi when i use treeMap class and if i exit the program

hi
hi when i use treeMap class and if i exit the program,
what will happen? the information that i put in the treeMap will be disappear??
if it is like that,,how am i able to retrieve my data...when i restart my program..
once i put ID as key and put my customer information,
in it, after exit my program,, and i can't find
my customers by their ID,,,,,,,,,how can,,i solve it......

what will happen? the information that i put in the
treeMap will be disappear??Yes. Of course. If you want data to hang around you have to tell the computer. If you want anything to happen you have to tell the computer.
if it is like that,,how am i able to retrieve my
data...when i restart my program..Tada! Tell the computer. Your simplest option is to use Serialization.
Before exiting your program, serialize your TreeMap to disk. After starting your program serialize your TreeMap from disk.
First stop should be your text book to learn what Serialization is and how it works, then try to write some code, then ask us to help with any problems.
Dave.

HT201210 I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad.

ITunes 9 Dumps music library when exiting the program

I would sure appreciate any help that you all might be able to throw my way. Upgraded to iTunes 9 a couple of months ago. Basically from the time it was installed I have had the problem that I must Manually click FILE and Add Folder to Library. Upon exiting the program it will then basically dump the whole library and the next time I open iTunes I have to Add Folders to Library Again. After the upgrade to 9 I didn't even try syn'in my Nano because I was afraid I might loose music so I just left it alone and kept fiddling trying to figure out why the library would dissapear upon exiting the program.
Just after Christmas I got a 16GB Touch so figured I really need to get the figured out..... and I'm still trying. Before connecting the Touch for the first time I COMPLETELY uninstalled iTunes, Quicktime, Apple Software UPdater, Apple Mobile Device Support, Bonjour,etc. After this, I found i still had an itunes folder in my Music folder so I deleted that (I pulled purchased music files into a seperate folder on my desktop just in case). I reinstalled itunes 9, went to File and then Add Folder to Library and imported everything. I wanted to get up and running with the Touch so I made a couple small playlists and called it a day. Exited the program, then re-opened it just to check if it was still there and it was! I was excited..... but not for long. Next day opened iTunes 9 and there was no music, the library was empty.
I could go on and on... but won't. I've read posts about checking the XML file in wordpad, which I've done and seems like it's correct. even when I go to Preferences/Advanced, and look at where it's storing it seems correct.
Can some one point me where to look?????
Thx! Jeromy

Thank you so much for your reply Katrina. Interesting stuff. Somehow in the mega searches I was doing for answers I didn't think to search using the Vaio angle. I will definitely go through those Vaio Files. This is my 4th Vaio and I NEVER seem to use any of the preloaded software, but to this point have not had problems until I installed iTunes 9.
Last night I read another post that reminded me that the music files that show up in the iTunes/music folder are just "pointers" or say "shortcuts" (I can't remember the actual term used) to where the ACTUAL music files are located. When I used the Add Folders from the file menu I've always assumed that these "shortcuts" have been placed in the iTunes/Music folder properly. But just in case, I clicked on the Copy Files to iTunes Media folder in Advanced tab to be safe and then I did the Drag/Drop from my windows MY MUSIC folder (rather than using the Add Folders to Library in iTunes). I started by dragging and dropping like 5 albums. Then I'd close, open, close, open etc. to see if they would stay in my iTunes music library.... and they DID! So I left it overnight and then this morning I dragged a bunch more albums into my iTunes music library. Did another close, open, close, open on iTunes and so far everything is staying in place. My next test is going to be to completely shut down my Vaio and start it back up and see if it's all still there.
Do you think any of this makes sense, or relates back to the Vaio software issues from the post you provided? I don't quite understand why it would work to drag/drop but not simply click Add Folders to Library???
Thanks Again,
Jeromy

HT1349 I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software.

Wierd message when program exits

every time I exit my program the consol outputs this phantom message:
Java2D Direct3D usage disabled by J2D_D3D env
However, the problem is, when I try debugging my program and put a marker on the System.exit(0), I dont find anything, and actually the message does NOT appear when I debug. Only when I run the program normally, and exit.
This message doesn't affect my program but I was just curious if anyone else has seen something like this or knows where it might be comming from.
Moe

Checked google? Seems to have happened before.
http://www.google.com/search?hl=en&q=%22Java2D+Direct3D+usage+disabled+by+J2D_D3D+env%22

Vba-m process does not end when program is exited

If I run a game in VBA-M, and while running the game, I exit the program, the VBA-M process continues to run in the background. How do I fix this?

Oh, interesting...
I get this but only if I have the window manager tell it to quit. (i3wm) I then have to send a kill 9 to the process. It seems to not be properly responding to kill 15.
VBA-M will exit properly if I use its own menu option or the ctrl+q shortcut.

How to find the ME29N 'USER EXIT' when our save the release PO after.

How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.

Hi,
process :
    go to tranx code :   ME29N ,
       System---->Status , here copy the program name (SAPLMEGUI),
     go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
     tranx code : CMOD , Utilites--->Sap Enanchement,
                                     specify the package name : ME
                                      and execute, displays a list of exits ,
                             and find out our suitable exit based on requirement.
check these :   EXIT_SAPMM06E_021
reg
Siva

When we have to go for session method, when we have to go for call transact

when we have to go for session method, when we have to go for call transaction method if i have a 3000 records in flat file. which is better? why

Data Transfer
During the process of data transfer, data is transferred into the SAP R/3 System. This transfer is from an external system to SAP R/3 system. Whenever you transfer data from an external system into an R/3 System, you can use data transfer because it is installed and regularly transfers data from an external system into an R/3 System.
As discussed, with the help of BDC, you can transfer the required data from a non-SAP system to an SAP system. For this kind of data transfer you are required to write an ABAP program. This ABAP program would help to export the concerned data to a sequential dataset file. The data in this file has to be stored. This should be stored in a format, which is acceptable to SAP batch input program. But, to transfer data from a SAP system to another SAP system, you can take the aid of RFC or CPI-C.
SAP application supports the data transfer of numerous SAP business objects. The said data transfer program specifies the data format definition, which is necessary to import the data into the R/3 System. There are three methods available for transferring data:
Direct Input:
In this method the SAP function modules execute the consistency checks. However, there are other means of checking with the help of screens. The Direct Input Method has considerable performance advantages.
Call Transaction:
In this method you can check the data consistency with the help of screen logic.
Batch Input Session:
In this method data consistency is checked with the help of screen logic.
Direct Input Method
Among the methods of data transfer through BDC, direct input method is the one that is used, especially in case of transferring large amount of data. In order to enhance the batch input procedure, the system offers you with the direct input technique.
There is a distinction between the batch input technique and this technique. Unlike batch input technique, this technique does not create sessions. Instead, it stores the data directly. Moreover, it does not process screens. The data has to be entered directly into the corresponding database tables. The system calls a number of function modules which execute necessary checks, if any required. In the case of errors, the direct input technique has a facility to restart the entire mechanism. However, if you want to restart the entire mechanism in case you faced an error, then direct input programs must be executed in the background only. One has to use program RBMVSHOW or Transaction BMV0 to maintain and start these programs.
Call Transaction Method
Call Transaction method is another method used for Data Transfer. In this type of method your program will use the ABAP statement CALL TRANSACTION USING in order to run a SAP transaction. In this type external data need not be deposited in a session for being processed later on. Instead, the entire batch input process takes place inline in your program.
Here, the data transfer program must convert the data that has to be transferred into the SAP system. This is as per requirement by the SAP data structure or the transaction which is using it. It is to be remembered that a conversion of the data types may be necessary at different times during the process.
Suppose there is a data type mismatch then you have to convert the data types to type C. In this regard the data transfer program should be capable of exporting the data in SAP format to the sequential file. At the time of uploading the data into the SAP system, the BDC program reads the data from the abovementioned sequential file.
Batch Input Session Method
This is the third method for data transfer. If you use the batch input method to transfer data, then you should remember that an ABAP program has to read the external data which is to be entered in the R/3 System. Subsequently, it stores the concerned data a "batch input session." The batch Input session records the actions which are required in the process of transferring data into the system. This can be done by using normal SAP transactions.
As soon as the program generates the said session, you will be able to run the session in order to execute the SAP transactions in it. Moreover, you can start the session, and at the same time, can monitor a session with the help of batch input management function. For this you have to choose:
System à Services à Batch input. Moreover, you can have the session run in the background processing.
Writing a Data Transfer Program
If you want to write a data transfer program, you have to follow the steps mentioned below.
Firstly, you will analyze the structure of the existing data. Subsequently, your job is to specify the conversions, which are essential to fill the SAP data structures.
Secondly, you have to generate the SAP data structure. In case the program is written in ABAP, you will require only the required tables in the concerned program with the help of TABLES statement.
Thirdly, you will have to initialize the SAP data structure.
Fourthly, fill the structure with data, performing any conversions and error checking that are required.
Finally, you will write the sequential file. In the SAP system this sequential file is typically required for making the data available to the batch input program.
Batch Input Method
Batch input method is a type of data transfer method. It is used for bulk data transfer; it is one of the primary ways by which data can transferred into the R/3 System. This method is not for near real-time data transfers.
There are various typical uses of batch input. One of the ways includes the one-time import of data. This import of data is from a legacy system into a newly installed R/3 System. In addition to it, another typical use is for periodic (i.e. hourly, daily..., and so on) transfers of data. These transfers are from external systems or legacy systems which are still in use into R/3 system where all enterprise data is consolidated.
The R/3 applications deliver different programs for batch input, which are ready to be used. However, in some cases a customer has to write his or her own batch input program. This is required in order to convert the concerned data from a legacy System or from a proprietary format into an R/3 data format.
The process flows for a batch input are discussed below.
Data Transfer Decision-Making: It is with a decision to transfer data from an external source into R/3 that the process of batch input begins. It is probable that the external source may be a legacy system that is being replaced. A one-time bulk data transfer is foreseen in this regard. Alternatively, the external source may be an external system that is to remain in use. In this case, a regularly recurring bulk data transfer is foreseen.
Setting up Batch-Input for Data Transfers: If R/3 standard one-time or regular data transfers are required, then by means of customizing settings in the R/3 Customizing System in SAP ASAP set up will occur. You must set up custom batch input procedures by hand, which means the system administrator must schedule the data conversion program that creates the batch input session. The system administrator and the batch input programmer must determine the following: how frequently data is made available from the external system, how frequently the conversion program should run, and whether the conversion program runs in R/3 (ABAP program) or in a host system (external program).
Processing Batch Input Sessions: When a batch input session is processed, then the actual transfer of data into R/3 takes place. Little attention is required in processing of batch input sessions by the system administrator. Usually, the starting of batch input sessions is automated by the system administrator. If necessary, the administrators can also start batch input session explicitly from transaction SM35.
Checking Batch Input Sessions: For a system administrator the routine activity is to check daily or more frequently in transaction SM35 whether all batch input sessions have been completed successfully. It is the schedule for running batch input sessions on which the schedule for checking sessions depends upon. For doing this check the R/3 System provides easy-to-use batch input management tools.
Analyzing Errors: It is the duty of the system administrator to analyze the problem if one or more transactions in a session end in errors. Usually, the assistance of the affected data entry specialist or department for this analysis will be needed by the system administrator. In the situation where the problem was caused by incorrect data conversion or incorrect generation of the batch input session then the programmer who wrote the data conversion program may also need to be involved.
Error Handling in Batch Input Method
It is found that most problems usually fall into one of the following two categories discussed below.
In this case either required data is missing from the batch-input session or invalid data has been included in the session. Errors in the data conversion program or the presence of unexpected types of data or incorrect data in the legacy database are the possible external causes of this type of problem. Within R/3, the causes for this type of problem include incorrect or incomplete customizing in an application. For example, a legacy data type may not have been foreseen in the check table entries made in application customizing.
This case mainly includes technical/programming problems. The data is entered by a batch input session by running R/3 transactions non-interactively. Therefore, a typical technical or programming problem is the incorrect identification of one of the data fields in a transaction. Thus, the conversion program may not fill a required data field or may have provided invalid values.
Conclusion
I have gone through the details of batch data communication and various methods used to transfer data. One can make use of BDC to transfer data from a SAP to SAP system. In addition, it can transfer data from a non SAP system to SAP system too. I have discussed the various methods of BDC and the error handling in the respective methods.
Thanks,
Shankar

The ABAP call stack was: SYSTEM-EXIT of program BBPGLOBAL

Hi
We are using SRM 5.0. We are facing a strange problem. We are able to see the initial screen of SRM EBP in the browser. But once the user name and password are provided the system goes for a dump with the following error:
The following error text was processed in the system SS0 : System error
The error occurred on the application server <Server Name> and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was: SYSTEM-EXIT of program BBPGLOBAL
SM21 Log:
Short Text
 Transaction Canceled &9&9&5 ( &a &b &c &d &e &f &g &h &i )
 The transaction has been terminated. This may be caused by a
 termination message from the application (MESSAGE Axxx) or by an error
 detected by the SAP System due to which it makes no sense to proceed
 with the transaction. The actual reason for the termination is
 indicated by the T100 message and the parameters.
Transaction Canceled ITS_P 001 ( )
Message Id: ITS_P
Message No: 001
I just checked these threads but did not help much,
RABAX_STATE error after loggin into BBPSTART service in SRM 4.
ITS_TEMPLATE_NOT_FOUND error
Besides I tried this note: 790727 as well, still I get the same error.
Any help would be highly appreciated.
Thanks in advance
Kathirvel Balakrishnan

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Default host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transaction server-->test service/Publish. (BBPSTART , BBPGLOBAL etc)
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (Transaction - SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

My safari screen suddenly fills my entire screen, and there is no right hand corner button to push to manually shrink it. What to do? I can never even exit the program without quitting it.

My screen when I am using Safari suddenly fills my entire screen, and there is no right hand corner button to push to manually shrink it. What to do? I can never even exit the program without quitting it.This has happened only within the last two days.

Try changing the screen resolution.
Go to Apple Menu / System Preferences / Displays.
Change the resolution. Whatever numbers are shown, e.g. 1280 x 960, select a larger one. The larger the number, in the resolution the smaller the display on the screen. You can keep changing this till you find the resolution that suits you.

How to Know Concurrent Program Finish

Hello,
We are on Oracle EBS 11i10.2 and are creating a procedure that executes a Concurrent Program, and we need to know in this procedure when the Concurrent Program finishes, does anyone know how to do this?
Thanks

Hi,
Please see these threads.
concurrent request status
concurrent request status
How to set the Concurrent request completed with warning?
Re: How to set the Concurrent request completed with warning?
Thanks,
Hussein

SunStudio debugger session exits when program finished

Similar Messages

Maybe you are looking for