Suppl

Hi,
I am working on supplier site open interface. I succesfully loaded data into 'ap_supplier_sites_int' interface table. After submitting supplier site open interface program, it's giving '*Operating Unit Info is null*' error. But, i have operating unit for corresponding supplier site.
Data in 'ap_supplier_sites_int' : (Just providing important columns)
vendor_name operating_unit country address1 address2 city state org_id
INTELLI Vision Operatins America 5 INDEPENDENCE WAY Suite 200 Princeton NJ 204
Verizon Vision Operatins America PO BOX 1100 null null NY 204
Verizon Vision Operatins America PO BOX 15124 null null NY 204
Verizon Vision Operatins America PO BOX 4648 null null NJ 204
Is there any link between operating unit, city and country.
Kindly help me. Thanks in advance.

It is possible that the error may not have anything to do with your data.
Make sure that you have set the following profile options correctly (esp. the first and the third one).
MO: Operating Unit => R11i profile option that will be maintained for those products and customers not leveraging Multiple Organizations.
MO: Security Profile => The MO Security Profile controls the list of operating units that a responsibility can access. So you would assign the Security Profile that you just created to this profile option. The lowest level you can set the profile option for is the responsibility level.
MO: Default Operating Unit => This allows you to specify an operating unit that will be the default when you open different subledger application pages
If not set, your programs may not work correctly.
Hope this helps,
Sandeep Gandhi

Similar Messages

OPEN_INTERFACE_REJECTS- INCONSISTENT SUPPL SITE

Payables Open Interface Import program is throwing INCONSISTENT SUPPL SITE, when a third party vendor site code and third party vendor site id is passed along with matching PO number for creating an invoice for third party vendor site.
Can any one let me know, how to resolve this issue.
Thanks in advance

Hi,
this could be due to passing values which are not correct for the vendor_site_id field ....do compare this transaction with other transactions that are imported successfully past, so that we can narrow down on the data which is different ...
Reference:
Expense Report Export Rejects Expense Reports With 'Supplier Site Id And Supplier Site Code Do Not Match' [ID 1408830.1]
Regards,
Ivruksha

UPS and 2 power supplies

Out of curiosity, what happens if only one of the two power supplies is kept on UPS and the power goes out?

What do you think will happen?
The power supply connected directly to the main power will go offline.
The power supply connected to the UPS will stay up (as will your RAID).
Your UPS will start to drain.
Ultimately, if the power stays off long enough, the UPS will be unable to sustain sufficient voltage and the second power supply will go offline, bringing down your RAID.
Is that what you mean?
Note that the XServe RAID can have a fairly significant power draw. You need to make sure your UPS is sized sufficiently for your expected runtime.

Payment Method Supplement Check Deactivation in F110 for already posted doc

Hi,
Is there a way to Payment Method Supplement Check Deactivation in F110 for already posted documents.
The background: Some invoices are posted for a vendor when there is a pmt supplmnt method "L-large". Subsequently payment method supplement in vendor master was changed to 'S'. There is debit note posted with pmt method supp 'S' in document. Now while doing F110 system is splitting up the payments based on pmt method supplmt and theline item with debit balance is going in error because of debit balance. As a result the debit balance is not getting knocked off with the credit balance line item.
Request you to help us in finding out if there is any way to generate onlyone line item in F110. Please rule out the option of changing the pmt supplmt at document level.
Regards,
nikhil

Hi Nikhil,
If you are not changing the payment supplement in the document, F110 itself will not allow you to change that. You can possibly deactivate the Payment method temporarily in customizing, run the F110 with only the affected vendors. and activate back the payment method supplement in customizing. You can activate this under APP customizing (FBZP) "All company codes" under the control data section
Ron

Create separate reservation for supplement to a CS-order

Hey
We have a system where by the formation of CS orders automatically generated a reservation (Using IWxx). Attributed to several components of the order, will supplement get same reservation number as the original warrant. This is inappropriate because of date management - observation fields and subsequent follow-up. There is a strong desire to create a separate reservation on the order for each additional supplement/order - this will make follow-up - Questions on the order and printing of various documents much more simple and uncluttered.
Is it possible to make different reservations for the same CS-order?
It must be said, there are a lot of cost and specially created thing that is also linked with the order.
Regards Lone

Hi Lone Host,
1. You have posted the Querry in the ERP-Manufacturing,
2. Kindly post in Correct Forumto get quicker response.
reg
dsk

Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

Hi CJR
I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
TC will back up until full and then begin deleting the oldest back-ups. Mine is a 2TB Time capsule.
My back-up plan is as follows:
1. Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
2. Contacts, reminders, appointments, notes, email are backed up through iCloud.
3. iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
4. Photos are on my MacBook Air and are backed up on my HP external drive.
5. Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS cloud and my old PC and does not alter their native format like storing in iCloud would do.
Cheers

Payment Method supplement is not found while posting invoice thru' F-43

Dear Gurus,
I have configured Vendor Account group (OBD3) & created a vendor account (XK01).While posting thru' T code F-43,an error "Enter payment method supplement in line item 001" is found.But, payment method supplement field is not found while posting.Please solve my problem.

hi ,
In F-43 when you enter the document & posting date, company code, currency , And Vendor number PRESS ENTER it will take you to next screen There you can find the PAYMENT METHOD tab under invoice reference .
hope this will help you .

How know which toner cartridge to replace if don't have access to supplies status?

Using Laserjet Pro 200 color MFP M276nw and need to replace at least 1 of the color cartridges. How do I know which one? After reviewing other postings, it says to check the supplies status or go to the system setup on the control panel. Well, I don't have any HP app on my laptop. So I tried to reconfigure the installation to see if that would lead me to the supplies status - but I stopped after it first required me to connect a USB cable btwn the printer and the laptop (when I'm already actively using the wireless setting). Help!
This question was solved.
View Solution.

Page 141 of the user guide here indicates the color of the low cartridge should be displayed on the control panel of the printer with a message like "Cyan Cartridge Low" or "Cyan Very Low". The message on the front panel would indicate which supply color is running low.
The settings can also be changed to allow printing as shown in the document here. You could then print a square of Red, Blue and Green on a test sheet.
If a toner is too low for proper printing the results would be as follows:
cyan: the blue box would look pink (magenta) and the green box would be yellow.
magenta: the blue box would appear light blue (cyan) and the red box would be yellow.
yellow: the green box would appear cyan and the red box would appear magenta.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Color Laserjet 3600n printer displays Install Supplies when supplies are installed

Printer displayed message that supplies were out for all toners except magenta.
We put new black, cyan and yellow toners in the printer but it still displays INSTALL SUPPLIES with questions marks for those three toners on the display screen.
We set the printer to DISABLE CARTRIDGE CHECK mode and requested it print an event log, so the data light turned on steady without blinking and the display says it's printing the event log, but nothing happens for hours.
Took out the three toners (black, cyan and yellow) and kept the printer in DISABLE CARTRIDGE CHECK mode, then was able to print anything requested but prints only have magenta toner on them.
Put a black in the magenta toner slot, still in DISABLE CARTRIDGE CHECK mode, and print only in black where the magenta should be.
Cartridge locks are in good condition. Have cleaned all contacts in the toner slots.
Have checked all connections from DC controller and re-seated the formatter and all appear to be secure and sound.
Any advice as to whether this could be the formatter, DC controller, or something I've not guessed?

Hope you a having a great day,
I am reaching out to probe if you still experience this issue and to make a suggestion. If you are, Perhaps since this is a commercial product, posting in the forum for HP Business Support will provide a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If you are not experiencing this issue any longer you may disregard this post, although I will appreciate if you can take I little bit of your time and let me know.
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP Color Laserjet 8500dn Printer Supplies

Hello,
Does anyone know if HP has stopped production on the Color Laserjet 8500 supplies such as:
C4149A Black Toner
C4150A Cyan Toner
C4151A Magenta Toner
C4152A Yellow Toner
C5153A Image Drum Kit
C5154A Transfer Kit
C4155A Fuser Kit
I have searched the HP Shopping web site and come up with product not found.

I do see the toners listed on HP Suresupply: https://h30042.www3.hp.com/SureSupply/?AppName=WWP&loc=us&lang=en&searchPrinters=designjet+510#3
I work on HP's behalf.

Condition supplement for automatic tax in sales order as well as billing

Dear All,
I am using pr0000 condition suppliments in my pricing procedure.I am maintaining material wise price along with taxes in pr00 condition(vk11).Every thing is fine but for the data getting posted into FI.It gives an error stating that error in account determination.What could be the possible reason for this error.?can we enter taxes for the material here?
When i am Entering the Taxes manually for the same material it is getting posted correctly.Where i am going wrong?Your solution to this is solicited and reward points are assured for
We are following TAXINJ proceeudre and we are connecting FI tax code through condition records.
govind.

Hi
Posting of Sales Tax or any taxes are thru Tax Codes. We have to configure tax code A0 for out put tax & V0 for input tax. Tax codes can be configured thru T-code - FTXP. The rate can be maintained at config level while creating the tax code or else we configure the tax code and later we shall maintian rate for the tax code in T-code FV11.
Note: - Tax codes are exported from one client (development client) to anoter and inported in receiving client (testing cleint).
Taxes rate maintaince is not thru VK11 it is FV11 for a tax code.
Thanks
Colin Thomas

CRM 7.0 IDES Supplement Error

We have installed CRM IDES 7.0.
When we try to supplement Russian Language we have Runtime Errors         DATA_UC_STRUCT_C_LENGTH
Error analysis
    In Unicode-compatible programs, the offset and length specifications
    for structures are limited to the length of the character-type initial
    part.
    In this case, the length specification 176 for the structure "<WA>"
    exceeds the length of the character-type initial part (=70).
Information on where terminated
    Termination occurred in the ABAP program "CL_CTS_LANGUAGE_SUPPLEMENT====CP" -
     in "REFILL_TABLE".
    The main program was "RSTLAN_SUPPLEMENT ".
    In the source code you have the termination point in line 228
    of the (Include) program "CL_CTS_LANGUAGE_SUPPLEMENT====CM008".
    The program "CL_CTS_LANGUAGE_SUPPLEMENT====CP" was started as a background job.
    Job Name....... "SAP-LANGUAGE-SUP RU"
    Job Initiator.. "SAPADMIN"
    Job Number..... 18531300
We don't find information about this problem on service.sap.com/notes.

Please, follow the SAP NOTES 1130387 and 1294109, and download the package to the adequated level due to your version.

Control eight 200mA power supplies

I need to control about eight 200mA power supplies. Each supply should be programmable from minus
30 volts to plus 30 volts. I need to be
able to sequence the outputs (have one output go to 5V, next another output go
to 8V, etc.). The next thing I need is
to output a serial data stream of about 10 bits.
My test case would be the following:
Sequence several of the outputs to different voltages, this
puts the ASIC I am testing into the mode I need. Then I need to have one of the
power supplies output a serial 10 bit word to load a register inside the ASIC.
Does anybody know if this could be done with a DAQ-card?

Hi Gary,
M Series DAQ cards provide a very flexible tool. You can have Digital Input and Output, Analog Input and Analog Output. The question is how are you going to control the Power Supplies? Do they take digital commands, or can you input an analog voltage as centerbolt mentioned? If you do need an analog output to control the power supply, then the standard multifunction DAQ cards will not work for you, because they only have at the most 4 analog outputs. There are dedicated Analog output cards that could provide this functionality.
The other idea is that you want the DAQ card to be your power supplies for you. If that is the case then that would greatly change what you require from the card, and no single card will be able to do that for you. Finally how does the power supply output a 10 bit serial word, is that inherent in a piece of hardware you already have, and if so how do you tell it to make that output. Please get back to me and we can probably find a solution that would work for you.
Have a great day,
Michael D
Applications Engineer
National Instruments

Payment Method Supplement issue

Hi,
Is there anyone help me to resolve the issue of using Payment method Supplement. We can use this indicator at the vendor master level or override it at the time of invoice entry. I tried to use this indicator at the time of posting the vendor invoice using FB60. But when I ran the payment proposal i.e. F110, it is not grouping the cheques among other cheques which have the payment method supplement active at the invoce entry level. Payment program config FBZP has this indicator active.
Is there any config/settings are missed in order to make this functionality works.
Any help is appreciated.
Thanks
Faheem

I can change either at the company code level or at the time posting a vendor invoice level. I changed at the invoice posting level but the payment program cannot pick that change and wont do the sorting of cheques. I think there is something needs to be changed in the payment program config.

Grouping key Vs Payment method supplement in vendor master data

Hi All,
Could you please explain me as to when we can use grouping key and in what situations to use payment method supplement.
They both looks like for grouping open items during payment .
I know the config steps for grouping key and payment method supplement.
I would like to know the different business usages of these fields.
Thanks in advance.
Regards,
DSK

Hi,
Thanks for the reply.
My aim is to group certain documents while F110 payments to a vendor (grouping based on a custom field)
So how can I achieve this - is it through grouping key or payment supplement and how to make settings in FBZP.
Thanks,
GAN

Clearing between invoices whith Payment method supplements

We are using Payment method supplements whith customers invoices, and need clearing this invoices whith suppliers invoices in F110 payments.
Suppliers invoices aren´t the supplement and due to F110 dont´t clear suppliesrs invoices whith the cuatomer invoices.
Is possible change this situation, to maKe the clearing whithout the complain equal supplemets between invoices?
Thanks.
Roberto

We are using Payment method supplements whith customers invoices, and need clearing this invoices whith suppliers invoices in F110 payments.
Suppliers invoices aren´t the supplement and due to F110 dont´t clear suppliesrs invoices whith the cuatomer invoices.
Is possible change this situation, to maKe the clearing whithout the complain equal supplemets between invoices?
Thanks.
Roberto

Suppl

Similar Messages

Maybe you are looking for