Support Package uprade in endless loop

Hello experts,
we have a SP upgrade (from ECC level 10 to SP-level 16) running in a queue that is getting imported via SPAM (version 36). The import has been running for more than 24 hours, is this normal or did I hit an endless loop?
I noticed it has been running (and still is) in one phase only
for ages:
"INFORM SAP-SYSTEM OF TP TERMINATION"
In the log files I can see this warning:
Background job RDDIMPDP could not be started or terminated abnormally
Looking around in this forum I think I've found the solution, I have to reschedule the background job RDDIMPDP.
But my problem is that am running in downtime-minimized mode in SPAM and I cannot logon to sap system anymore, it gives me a syntax error if I try to. How can I cancel this SPAM import, can I somewhere kill processes, or should I just restart the SAP application server??
Can you please, please advise? Your help is really appreciated!
Manfred

Hi,
If you are getting Syntax error for every Txn. then u can't do anything expect Restore.
I faced same problem some days before & resolved by restoring the backup.
Also in my case the exact problem is the wrong value of parameter rdisp/msvsrv_internal & I reset it to default value 0 & next time my patch is upgrade successfully.
BR,
Darshan

Similar Messages

HP Support Assistant: Tune Up: endless loop on step 2

In running the second step of Tune Up in HP Support Assistant---Microsoft Disk Defragment---the little circle goes round and round, even after a fully day, and never stops; it seems obviously 'hung up'; any suggestions on how to remedy this?

I have the exact same problem. I have uninstalled hp support assistant, restarted and tried again but it never goes through the defrag step. Then the next time I start hp support assistant if I look on the settings the defrag option is no longer even on the menu. I see your question was asked in December of last year. Has there been a resolution? It used to work fine so I don't understand what happened.

Loop in file to IDoc scenario PI 7.11 (Support Package 04)

In our scenario we use FileSenderCommunicationChannel to get files from FTP-Server. After processing the file should be saved in archive directory on our PI-Server (UNIX-System). Physically the archive directory is not in our PI-Server, it is a mapped windows server directory.
In case of non availability of the archive directory (e.g. windows server down), we have the following described problem.
1.
Start processing of file from FTP-Server (File with 2 lines, result 1 IDoc per line (2 IDocs))
2.
In AdapterEngine monitor we find 2 messages (successfully). Audit-Log of last message (second line) contains the following error.
File "TUM00001.TXT" - archiving file "/ext/windows_server/X/OLD/20100326-075807-897_TUM00001.TXT" after processing failed with java.io.FileNotFoundException: /ext/windows_server/X/OLD/20100326-075807-897_TUM00001.TXT (No such file or directory) - retry.
3.
In IntegrationEngine monitor we also find 2 messages for the IDocu2019s.
Error situation:
Now the loop startsu2026. (until directory is available (mapped)). Frequency of loop depends on u201CPoll Interval (secs)u201D of FileSenderCommunicationChannel.
1.
Create new message in AdapterEngine for last line of the file (with same entry in Audit-Log u201Cerror for archiving fileu201D)
2.
Create new message (IDoc) in IntegrationEngine
We doesnu2019t have this problem in our old environment (XI 3.0 Support Package 21).
Parameter of FileSenderCommunicationChannel:
Quality of Service: Exactly Once
Poll Interval (secs): 3600
Processing Mode: Archive
Archive Directory: /ext/windows_server/X/OLD
Directory for Archiving Files with Errors: /ext/windows_server/X/OLD/ERR
Recordset Structure: ROW, 1
Recordset Sequence: Ascending
Recordset per Message: 1
For me itu2019s an error, but Iu2019m not sure because itu2019s a mapped directory.....

Hi Ram,
There is nothing new in PI7.1 which can cause these errors.. it is because the interface is configured wrongly
>>1) in Message mapping - I import the receiver idoc metadata. and doing mapping.So there are couple of mandatory fields over there. Please let me know how to treat them. Do I need to diable them or put some value. for exp Direct, Segment. SNDPRN RECPRN all these madatory fields are there. Please advice.
If you know the value the you can create the control record during mapping and the fields which you don;t required you can map it co constant. It is using this control record the partner profile entries are found and if there is a mismatch then the idoc will fail with the error which you mentioned in point 3
>>2) When I am creating communication component for sender side(File system) then should I assign the logical port and if then what name it can be . Is there any other place we need to maintain this entry. I remember in PI 7.0 I dont need to assign the local name. But here i see I need to do. if I am not putting the name over there then it throw error message "Unable to convert the sender service <Business Compoenetname> to an ALE logical system.
No in 7.1 also we dont have to do anything like that. There is a blog on this error from Michael, please go through it and understand why and how this error occurs. May be in PI7.0 you were lucky enough for not getting this error
>>3) now any how I am able to process the idoc from PI and its coming to ECC system. but it showing failed over there and giving me error message. "EDI: Partner profile inbound not available"I checked all the relevent partner prfile configuration is already there"
Check the control record of the generated idoc and see whether you have a partner profile entry for the parameters mentioned in it. If not then you need to correct them in PI
Regards
Suraj

WinRM endless loop script/package sccm 2012

I'm trying to enable winrm in task sequence for sccm 2012 during installation of Windows 7 clients.
winrm quickconfig -quiet -force
or
cmd /c winrm quickconfig -quiet -force
I have tried variations of this but I always get an endless loop, doesn't matter if I do command line or a package with a bat file.
Anyone else having this issue?

What I mean with loop, is that it keeps rerunning the same command over and over again. In task manager I see multiple cmd processes running. If I manually run the command in cmd it configures it correctly.
Here is the essential part of execmgr.log:
<![LOG[Successfully prepared command line "C:\WINDOWS\system32\cmd.exe" /c winrm quickconfig -quiet -force]LOG]!><time="14:26:03.416-60" date="12-04-2014" component="execmgr" context="" type="1"
thread="2572" file="scriptexecution.cpp:650">
<![LOG[Command line = "C:\WINDOWS\system32\cmd.exe" /c winrm quickconfig -quiet -force, Working Directory = C:\Windows\ccmcache\13\]LOG]!><time="14:26:03.416-60" date="12-04-2014" component="execmgr" context=""
type="1" thread="2572" file="scriptexecution.cpp:352">
<![LOG[Created Process for the passed command line]LOG]!><time="14:26:03.427-60" date="12-04-2014" component="execmgr" context="" type="1" thread="2572" file="scriptexecution.cpp:513">
<![LOG[Raising event:
[SMS_CodePage(850), SMS_LocaleID(1053)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "S012000E";
ClientID = "GUID:5b5d231d-116e-47f0-81d0-c93839a752e2";
CommandLine = "\"C:\\WINDOWS\\system32\\cmd.exe\" /c winrm quickconfig -quiet -force";
DateTime = "20141204132603.431000+000";
MachineName = "SCCMTESTVMSTHLM";
PackageName = "S010005C";
ProcessID = 1344;
ProgramName = "WinRM";
SiteCode = "S01";
ThreadID = 2572;
UserContext = "NT instans\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\13\\";
]LOG]!><time="14:26:03.435-60" date="12-04-2014" component="execmgr" context="" type="1" thread="2572" file="event.cpp:715">
<![LOG[Raised Program Started Event for Ad:S012000E, Package:S010005C, Program: WinRM]LOG]!><time="14:26:03.437-60" date="12-04-2014" component="execmgr" context="" type="1" thread="2572"
file="executioncontext.cpp:459">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="S010005C",ProgramID="WinRM", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="14:26:03.439-60"
date="12-04-2014" component="execmgr" context="" type="1" thread="2572" file="event.cpp:405">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="S010005C",ProgramID="WinRM", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="14:26:03.478-60"
date="12-04-2014" component="execmgr" context="" type="1" thread="2572" file="event.cpp:405">
<![LOG[MTC task with id {4BC725EF-6456-4C9E-AEEA-F3639600D829}, changed state from 4 to 5]LOG]!><time="14:26:03.511-60" date="12-04-2014" component="execmgr" context="" type="1" thread="2912"
file="execreqmgr.cpp:6288">
<![LOG[Program exit code 1]LOG]!><time="14:28:40.165-60" date="12-04-2014" component="execmgr" context="" type="1" thread="296" file="scriptexecution.cpp:676">
<![LOG[Looking for MIF file to get program status]LOG]!><time="14:28:40.177-60" date="12-04-2014" component="execmgr" context="" type="1" thread="296" file="executionstatus.cpp:282">
<![LOG[Script for Package:S010005C, Program: WinRM failed with exit code 1]LOG]!><time="14:28:40.178-60" date="12-04-2014" component="execmgr" context="" type="3" thread="296" file="executionstatus.cpp:252">

I woke up this morning and google and gmail no longer work in firefox. I get the endless loop error

I woke up this morning and google and gmail no longer work in firefox. I get the endless loop error.
I have the latest version of firefox and it is running under win 7 pro.
it was working great since I installed it 3 weeks ago and I use it every day.
the error reads:
The page isn't redirecting properly
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
This problem can sometimes be caused by disabling or refusing to accept cookies.
However my cookies are still enabled and and i have never changed my settings

See also:
*http://kb.mozillazine.org/The_page_is_not_redirecting_properly
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
*https://support.mozilla.org/kb/Cookies

Withdraw to bank account puts me in endless loop...

I'm trying to withdraw PayPal funds to my bank account, but trying to do so starts a series of steps that put me in an endless loop. When I choose to withdraw money and enter the amount, I get the error "Sorry, but we need more information. Please withdraw money on our Classic site instead." So I follow the link provided to the classic site and try to withdraw again and I get a security check "Verify your account. We don't recognize the device you're using. To continue withdrawing money, please verify your account." I choose to receive the automated phone call, receive the call, enter the code and get the message "Your account is verified! Thanks for verifying your account. You can now withdraw money." When I click the "Continue" button it asks me to log in again (I'm already logged in). I log in again and get two links to "Log out" and "My Account". I choose "My Account" and I'm right back where I started. I can do this over and over with identical results. I've tried it with both Chome and Internet Explorer, same results. I can't figure out of PayPal is specifically designed not to let people withdraw their funds, or I'm just experiencing incompetent web site design. Considering both the online help and phone support reference menu items that are no longer there or have been renamed, I'm guessing that "attention to detail" isn't a real high priority at PayPal. So does anyone have any suggestions how how I might get past this endless loop and transfer my funds? Thanks much...

Yep, did all that. Tried Chrome and Internet Explorer. (IE is always the fallback... for 22 years in the corporate world we were required to only use IE. So I have a completely vanilla IE installed to test things when I have any issues.) Your message did give me an idea though, and I tried Safari on my iPad. My iPad has NEVER been on Paypal. Same loop. It almost looks like my "verification" (the phone call thing) isn't being saved on Paypal's system, or the "new" and "Classic" Paypal systems don't talk to each other correctly or some other oversight. Hopefully someone in customer service will be able to flip a bit on my account and get it working correctly. Thanks for the suggestion...

I can build my iPhoto book book but it will not upload. It hangs up and asks me to retry. endless loop.

I can build my iphoto book, but it will not upload. It hangs up and asks me to retry. endless loop.

Five Steps to a Great Book / Cards / Calendars - http://support.apple.com/kb/HT2536.
How To Preview a Book / Card / Calendar Order - http://support.apple.com/kb/HT1040.
First preview the book to ensure that all the pictures appear fine in the preview.
What is the exact error you are getting, as this may help determine what you need to do for a resolution.
Also, try to connect to the internet direct wire instead of wireless for best results.

Data load results in Endless loop

hi guys
i have a infopackage in a process chain it was working fine, until i retransported the process chain without the info package, now when i run the process chain or the info package(without process chain) it goes into an endless loop. i get a short dump "MESSAGE_TYPE_X" after hours, it just keeps on loading 2000 rec's in every data packet. any ideas what happeend and what went wrong.
i have tried re trasporting the same infopackage from DEV again i get the same error, please suggest any thing else i can try to check whats going on why is the load not ending.
thanks

Hi,
this error may occure when there is shortage of resource, work processor.
may be the IDOC are stocked in Source system needs to passed to BW.
use the BD87 and process manually or may be you can check in the Sm58 also for the stocked LUWs and process manually.
Regards,
Vishwa

Locked out of all Adobe CC apps by endless loop of sign in screens

I updated all my CC apps:Lightroom, Photoshop and Bridge this morning, using the CC updater. All appeared to go well with the downloads and installs, but now I can't open any of these because I get a pop up requiring me to sign in with my Adobe ID, and that screen just repeats in an endless loop. Help!

Just got through a chat with Adobe support. The solution was to go to the Program Data Folder for Adobe: %ProgramData%/Adobe, and rename the SIStore folder to SIStore_old. Some file or files in this had presumably become corrupted, and forcing a re-creation of the files and folder set things right again.

Acrobat Pro Won't launch. Software agreement endless loop

I am trying to get acrobat x pro working on my computer. It is installed as part of the Creative suties 6 design standard package. When I go to launch it all i get is an endless look of the Adobe Software LIcnese agreement. I click accept and it happens again. I am running it on windows 7 64bit
I have tried reinstalling
I have tried using the trick of deactivating another program, then resigning in.
I even have tired the adobe cleaner tool.nks
Any thoughts?
Machines specs
Windows 7 64bit
Core i5
8 gigs of Ram
128 gig ssd
Thanks!
Dan

https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 71
[email protected]
发件人： penton
发送时间： 2014-11-22 10:22
收件人： wang jun
主题： Acrobat Pro Won't launch. Software agreement endless loop
Acrobat Pro Won't launch. Software agreement endless loop
created by penton in Downloading, Installing, Setting Up - View the full discussion
I am trying to get acrobat x pro working on my computer. It is installed as part of the Creative suties 6 design standard package. When I go to launch it all i get is an endless look of the Adobe Software LIcnese agreement. I click accept and it happens again. I am running it on windows 7 64bit
I have tried reinstalling
I have tried using the trick of deactivating another program, then resigning in.
I even have tired the adobe cleaner tool.nks
Any thoughts?
Machines specs
Windows 7 64bit
Core i5
8 gigs of Ram
128 gig ssd
Thanks!
Dan
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6952827#6952827 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6952827#6952827
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Library File endless loop...$100 to fix the problem

I created a Library file and inserted it on two pages. now I get this endless loop of "update" and nothing gets updated. I will pay the person $100 bucks if they can figure out the TRUE answer to what is going on and can fix it! Dreamweaver support says this is NOT a software issue and they can't help. Why not, no idea...but let me know who can fix this!

I never use library items. I much prefer server-side includes.
Without seeing your code, I'm guessing
a) your library item is corrupted and/or
b) the file's containing the library item have code validation errors which DW cannot reconcile.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
JavaScript - http://www.jslint.com/
PHP - http://phpcodechecker.com/
Nancy O.

IPhone 3gs in endless loop and battery is not charging

Hi, I have tried to use as many methods from this forum as well as other forums but so far no success. I am hoping someone will be able to give me some idea. Much much appreciated.
I have a iphone 3gs 16GB. I can't get it to start up to begin with without charging it. The battery bar is red color. When I plug it in to either the charger or directly to my MAC, it will start charging. After a few minutes, the red battery bar will go away and the apple logo will appear. After that, the loading circle will appear and then it goes into an endless loop. I have tried to do a hard restore (power + home buttom), iRecovery or even redsn0w but none work as it cannot detect the device. iTunes also doesn't detect the device. I have cleaned all the connecters as well as tried it on my ipod, it works. Once the apple logo and the loading circle starts, I can't even shut down the iphone. The phone will stop charging after a few minutes and the cycle of charging will start again if I am plug in to the charger.
What should I try? Please help me . Thanks a million!

When you say you have reinstalled iTunes many times, have you followed the directions Apple gives for uninstalling and reinstalling iTunes and all it's ancillary applications and processes?
Apple's documentation on the process can be found here:
Windows XP: http://support.apple.com/kb/ht1925
Windows Vista or 7: http://support.apple.com/kb/HT1923
Mac OS X: http://support.apple.com/kb/HT1224
I hope this helps.

Ibwait(gbib0 0x000) endless loop when opening NI-Spy

Hi,
I have swapped a NI PCI-GPIB in my computer. I have installed the NI-488.3 ver 2.10.
Since then, when I open NI Spy I get an endless loop running messages showed below, although there is nothing running at the background or so.
138888. ibwait(GPIB0, 0x0000)
Process ID: 0x00000B9C         Thread ID: 0x000006A0
Start Time: 17:30:32.890       Call Duration: 00:00:00.000
ibsta: 0x164       iberr: 0             ibcntl: 0(0x0)
What is the reason for it?
How can I stop it except closing NI-spy or switching to log "off"?
Best regards
Yariv

Hello,
Do you have any programs running which access your GPIB interface? I would try uninstalling the version of NI-488.2 you currently have, and installing the lastest version supporting your hardware and OS; you can find a link to this in the Hardware-OS chart for NI-488.2 at the following url:
http://www.ni.com/support/gpib/versions.htm
Repost with the results and we'll continue to look at this if necessary!
Best Regards,
JLS
Best,
JLS
Sixclear

"Connect to your computer." "Use iTunes to restore" endless loop, ***?

I... I thought this was a Windows only problem. Soooooooo, what does it mean? Replace HDD? Logic Board? Try restoring on a PC?

"I like donuts." LOL
See if you can put the iPod into Disk Mode.
http://support.apple.com/kb/HT1363
If so, see if doing a Restore now works without the "endless" loop.
If that does not help, try reformatting it using Windows (from a Windows Explorer window), with iTunes not running. Use a full format instead of any option for a quick format. If that completes successfully, run iTunes and try doing a Restore again.

Run SQL Agent Job in endless loop(When it's done, start over again)

Hi All,
There is an SQL Agent Job containing a complex Integration Services Package performing some ETL Jobs. It takes between 1 and 4 hours to run, depending on our data sources. The Job currently runs daily, without problems. What I would like to do now is to
let it run in an endless loop, which means: When it's done, start over again.
The scheduler doesn't seem to provide this option. I found that it would be possible to use the steps interface to go to step one after the last step is finished, but there's a problem using that method: If I need to stop the job, I would need to do that in
a forceful way. However I would like to be able to let the job stop after the next iteration. How can I do that?
Thanks in Advance...

Seriously I cant think of a reason for continuosly running a step like this
Do you mean you need to keep on polling db for something continuosly ?
If thats the requirement there's no need of continuosly calling the step
Instead of that you can include a loop with wait logic to keep on checking for your condition until it satisfies. You can WAITFOR clause for that
see an example here where I've implemented similar logic in SSIS
http://visakhm.blogspot.in/2011/12/simulating-file-watcher-task-in-ssis.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Support Package uprade in endless loop

Similar Messages

Maybe you are looking for