Suppress Message / Clear Status line

Hello Gurus,
I am using function module MB_PHYSICAL_INVENTORY in a RF-transaction. There I am collecting all return messages into an itab to show a protocol in a small popup.
The problem is, after completition of the posting a message (type S) is shown in status line (e.g. "Diffs in phys. inv. doc. 240307242 posted with m. doc. 3702433524").
Is it possible to suppress this message somehow or is there a way to clear the status line manually (w/o displaying another message)?
Help is much appreciated,
Alej
PS: Points will be rewarded for helpful answers!

The complete process is using three function modules. The first is the above mentioned MB_PHYSICAL_INVENTORY. Even if this function module was executed successful (BLING message appears on the status line), the other two could have run incorrect.
For Example:
FM 1 correct (Status message)
FM 2 correct
FM 3 ERROR
So I want to display the user a complete log of the results of all function modules and the user shouldn't think 'Everything was fine!' because of the message of the first FM.
I hope I could clarify my problem.

Similar Messages

Frm messages only in status line not as pop-up

How can I tell forms to display the frm-messages like
frm-40406 transaction completed...
only in the status line without any pop-up window which I have to confirm?

I don't want to send my own messages.
My thread is about automatic generated Forms messages.
On my Deveplopement-Workstation, the FRM-40406 message text only appears in
the status line. That's ok.
On the server IAS 9.0.4 the message appears on the status line, but also as pop-up message.
Can I configure this anywhere on the server?

Mail.app reading HTML messages - status line?

Is there a status line or other field that displays the contents of an embedded link in HTML messages?
If so, where is it, and how does one enable it?
To be precise, what I am looking for is the equivalent to the status line that Safari displays at the bottom of a browser window where the user can view the contents of a link when the cursor is hovering over a picture or text which is a hyperlink to another document or website.
Why I'm looking for this, is so that when reading eMail with hypertext links (HTML eMail) the destination of the link would be visible, so if someone sends me phishing email with a link that says "https://safeharbor.ebay.com/" and the actual html (which can be seen by using "View => Message => Raw Source") says something like https://190.121.43.66/cgi-bin/steal-this-password.exe?user=myname&email=user@exa mple.com" it is obvious that I shouldn't click on the link. Likewise, when load-pictures is off, I can hover the cursor over the graphic and see whether the graphic is just an image (http://www.site.com/picture.jpg), or is an image with a tracker attached (http://www.site.com/cgi-bin/showpic?email=[email protected]&image=picture.jpg).
I was hoping this would be in the new Mail.app for leopard since creating HTML mail was available, at least in limited form, and Phishing is NOT a new problem. Also, since Mail.app uses the safari rendering engine to display HTML in eMail, it make sense that it could also display link info.
SO, does it exist? Is there some magic key combination or hidden (well hidden) menu or preference option to set to see this simple link information? I know I can do it by viewing the raw source, but that is a royal pain in the a** to read all the gobbletygook, html, css, javascript, etc. that shows up in html pages. And maybe a good percentage of Apple users don't know how to read HTML anyway, although most do know what a URL looks like.
-Carl

How does one go back and EDIT a post to fix a typo, or other grammatical or formatting error?
(My -- strike-through -- text was not supposed to be that way, and I see I'm missing the (") quote at the beginning. I likely put in a dash or two for offsetting it, but apparently that was a formatting hint to strike it out. Arrrgh!)

MR11 error message system status CLSD is active

MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status.

VF11 wrongly created with RV Doc type and with not clear status.

Hi All
Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing types) and it is in not clear status.
2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
Order Type : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
Order type: ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.
      FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
I reviewed similar issues with SAP Note and with below explanation:
          "There are 2 procedures that are possible when Vf11 is posted.
          Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
          New Procedure - A Real FI reversal was carried out with clearing."
In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
     Appreciate your answers or suggestions.
Thanks in advance,
Sunil
Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

Thank you Ivano.
I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
Thread is closed.
Sunil

How to pass message in Status Bar

How can I pass message in status bar.
I typed bellow line but get some error.
void itemFileOpen_actionPerformed (ActionEvent e) {
statusBar.setText(" need Help ");
Error: (456) method setText(java.lang.String) not found in class oracle.dacf.control.swing.StatusBarControl.
Warning: Deprecated APIs are used. Please recompile with the 'deprecation' option for details.
null

Sergio,
Even though your form is based on the Apps Template form, double-check to ensure it has all of the triggers it should have, like the Form level Key-Commit. The easiest way to make this comparison would be to open your custom form and then open one of the EBS forms like "ARXCUDCI". If your comparison shows no significant differences you might be dealing with a situation when the message is displaying in the Console (status bar) but something else is clearing the console. Check for any Clear_Message calls.
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly

How to Disable status line

I want to hide status line containing 'Record 1/1' , OSC. But i want to display status line that shows 'Transaction commited' etc.
How can i disable it?
null

Hi,
In order to suppress information on the status line, you must hide the entire
console. To hide the console, set the Console Window property to <NULL> in the Form Module Properties sheet. The Console Window
property cannot be altered programmatically at runtime.
The console contains the status line and the message line. If the console is not displayed, then NO messages on the message line will be displayed either. All Oracle Forms Runform messages and custom messages would have to be displayed using alerts by coding the ON-ERROR and ON-MESSAGE triggers.
Best Regards,
Deepak Rai

Tax Code Suppress while Clearing

Hi,
For few scenario, when the user is trying to clear a Vendor using FB05, the Tax Code field is showing as suppress for the Vendor Line item.
Can this field (Tax Code)be made optional or mandatory for Vendor line item.
Thanks in advance.
Mayank

Hi,
At transaction level, the following are the three areas which are used for suppressing or mandatory or optional.
- GL FSV
- GL Account Groups
- Posting Key
U need to play around these to understand where and how to change the status..
Cheers
Raghu

How to use another panels in status line

Hi Everyone:
Can anybody tell me how can i use another panels in the
Console's status line, I'm using the message line but i need to
show the user's name and Date-Tiem in another section of the
status line and not in display controls as i'm already doing it.
Thanks.

Do you really need a JSF component for that? You can use h:panelGroup and some JS. But a simple div with some JS is also sufficient.

How to Suppress Message in Forms

Hi,
Kidnly help in the following situation:
I write a procedure in post_query trigger if line_location_id is null then
fetch the value from line master table .when ever the cursor focus on that block,
it asks "Do you want to save". I want to supress this message when the focus moved on this block. Once the user completed his task then only it asks "Do you want to save". How to do it .
Kindly help me.
Thanks,
Sri.

some message like "do you want to save your changes" cannot be suppressed.
And if possible, don't use :system.message_level, because mostly you suppress messages, that you don't want to suppress.
Maybe use ON-ERROR and ON-MESSAGE - trigger on form level. Then you can filter these messages explicit in this case.
try it
Gerd

Profit center clearing accounts line item display

Dear all,
I have implemented document splitting at profit center level.
The zero balance clearing account (profit center clearing account) is open item managed and also line item display tick is put. eg both ticks are active.
I am trying to see the line items in the account using fbl3n,fs10n etc but am not able to view the line items althought the balance of the account is visible in fs10n.
the message i get is 'no line item selected'.
Pl suggest some way through which i can see the line items of the profit center clearing account.
Regards,
Rishikesh

Dear Venkatesh
I am also facing same problem, I am using T Code FAGLL03 to display Line Items for Zero Balance Clearing A/c but I am not getting line item display instead it is giving following error.
=========================================================================
Account 141010, company code VALC is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 141010 in company code VALC as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
=========================================================================
Please do suggest me.
Thanks in Advance
Regards
Ratnakar

How to clear overlay line

I would like to clear a line drawn using IMAQ Overlay Line without clearing all overlays (using IMAQ Clear Overlay). I tried using Overlay Line with the Transparent color (using the same line coordinates) and this did not work. Anyone have any suggestions?
Thanks

Sandor a écrit:
I would like to clear a line drawn using IMAQ Overlay Line without clearing all overlays (using IMAQ Clear Overlay). I tried using Overlay Line with the Transparent color (using the same line coordinates) and this did not work. Anyone have any suggestions?
Thanks
A simple trick is to copy the overlay to another empty image, and to copy back this overlay to erase any posterior modification. The attached vi demonstrate this solution. An alternative would be to construct an array in witch all the additions to the overlay would be stored, and to redraw the overlay from scratch using this array.
Message Edité par chilly charly le 08-31-2005 05:38 AM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Save Overlay.vi ‏93 KB

Display a message in status bar when error in a block based procedure

Hi
I have a block based on procedures.
If I have an exception when I try to insert a record for example, how can I display a user friendly message in the status bar ?
here is my insert procedure :
PROCEDURE emp_insert2(t IN emptab) IS
BEGIN
    FOR i IN t.first..t.last LOOP
    INSERT INTO emp (empno, ename, job, hiredate, sal)
    VALUES(t(i).empno, t(i).ename, t(i).job, t(i).hiredate, t(i).sal);
    END LOOP ;
EXCEPTION
    When DUP_VAL_ON_INDEX then
        Raise_Application_Error( -20002, '^This identifier already exists^' ) ;
END emp_insert2;When I use the ON-FORM trigger and ERROR_CODE and ERROR_TEXT variables, I get an FRM-XXXX message saying :
40735--INSERT-PROCEDURE trigger raised unhandled exception ORA-00001.
I want a message like :
ORA-20002 This identifier already exists

Hello,
ORA-20500: ^This identifier already exists^ ORA-06512: à "SCOTT2.EMP_PKG", ligne 48
I cannot figure out what is the problem described by the second part of the message.
why numeric or value error in this case ? ( ligne 48 corresponds to the raise_applicaion_error instruction )There is no problem with the second part it is just for showing the line number it not the numeric or value error the code for numeric or value error is ORA-06502. See the below link for more information
http://www.techonthenet.com/oracle/errors/ora06512.php
So, now you can display your customized message in status bar using the error code which you defined in RAISE_APPLICATION_ERROR like below...
DECLARE
     errcode VARCHAR2(50) := DBMS_ERROR_CODE;
     errtxt VARCHAR2(1000) := DBMS_ERROR_TEXT;
BEGIN
     IF vErrCode='-20500' THEN
        MESSAGE('Here display your customized message.');
     ELSE
        -- Handle the rest errors...
     END IF;
END; -Ammad

Status Line in Web Forms

I am using the static implementation of forms. I have specified
a console window in the forms property. I cannot see the status
line in version 6.0 (forms are displayed in the same frame as
static HTML). When I used version 5.0 of forms which displayed
the Web form in a new frame I got the status line but it was
always set to "Warning: Applet Window".
I like 6.0 implementation of showing the form in the same frame
but the messages in the status line is very important to my
application. Any help?
I tries adding "USESDI=YES" parameter to the static HTML, did
not make any difference. The client side looks like doing MDI
implementation because I can move my form around within the
applet window.
Thank You,
Amir
null

Amir Razavi (guest) wrote:
: I am using the static implementation of forms. I have specified
: a console window in the forms property. I cannot see the status
: line in version 6.0 (forms are displayed in the same frame as
: static HTML). When I used version 5.0 of forms which displayed
: the Web form in a new frame I got the status line but it was
: always set to "Warning: Applet Window".
: I like 6.0 implementation of showing the form in the same frame
: but the messages in the status line is very important to my
: application. Any help?
: I tries adding "USESDI=YES" parameter to the static HTML, did
: not make any difference. The client side looks like doing MDI
: implementation because I can move my form around within the
: applet window.
: Thank You,
: Amir
I'm developing with Forms 5.0.
With Microsoft Explorer the Frame always show the message
"Warning: Applet Window", but with Netscape Communicator 4.5 IT
WORKS!!! It always show the correct message.
null

Transfer posting with clearing missing line item

we create a customer FI invoice 300 USD for one customer A, reconcill. account is 1019500, we do fb05 transfer posting clearing, thus another account is temporary account :1015600, the clearing document type is Z1,
(40) Dr: 1015600 300 uSD
(17)Cr: customer A 300 USD
in FBl3n for 1015600, we see line item 300 USD, in FBL3N for 1019500, we also see line item 300
but in FBL5N for customer, we can't see document type Z1 and line item 300, why this happens
my document type Z1 already set intercompany posting and customer account type allowed.
I tried post incoming payment, also can't see line item, but for invoice, we can see line item.
why clearing doc not appearing in customer line item?

I choose all items,
the funny thing is the invoice 300 USD is in cleared status, thus no open item, but the customer balance is not correct, it should be 0, not 300 USD.
why it is cleared , but bal is not zero and line item doesn't show this cleared doc?.

Suppress Message / Clear Status line

Similar Messages

Maybe you are looking for