Surcharge for employees above 1 Cr.

Hi.
I am new to the functional side of HCM, so please do bear with me.
I have the following issue:-
An employee has a salary of above 1 Cr and there will be a INCOME TAX Surcharge levied on him as per the Indian Govt.
In the PC_PAYRESULTS the Surcharge has been deducted correctly for months before April 2014 but when running the payroll for April 2014 this surcharge is not seen in the RT Table.
Please let me know if this is STANDARD or a solution to the same.
Thanks.
P.S. The client has implemented SAP note 1829618

HI Balakrushna Sahoo
Thank you for replying.
>The hyperlink in your reply is inactive... can u send the link again? I could not find anything online related to SAPNote 1994522.
>Just to be clear, To fix this issue for this year I will have to install this SAPnote 1994522. Also will I need to install the newer SAP notes for the next year as well 2015-2016 if the same issue happens next year?
Thanks.

Similar Messages

  • Error determining address for employee when replicating

    Hi,
    We are in SRM 5.0, classic scenario.
    We are using HR replication .
    I replicate the Org structure and the user from an HR system via ALE.
    Apparently all works fine (in PPOMA_BBP I see the Position, the CP, the BP, and the user links US) (similar to a user previously manually created)
    However I can not shop with it as I receive messages
    -No data found for contact person HR08007850 Contact system administrator
    -No addres found for Partner function type Good Recipient
    -No addres found for Partner function type Requester
    In Users Gen if I make a Check User and Employee data, selecting by BP (Employee role) for the Business Partner BP of the Central Person of the user I receive error messages
    Error determining address for employee .........
    The BP for all objects(Contact person,employee etc) have all the relevant address data .
    Entries can be seen in tables BUT020,BUT050 for the addresses.
    Also we had not created the SU01 users before replicating the Org structure but created thenm after the replication .Then for integrating the users into the Org structure,we jsut assigned the users to the CP's in PPOMA_BBP itself(as USERS_GEN is deactivated for HR-ALE replication).After this,we were able to see the CP-US relationship but when we do the consistency check,we get the above mentioned errors i.e.
    Error determining address for employee......
    Employee relationship between BP.... and BP(org) missing
    Has anyone faced a similar situation??Any inputs will be appreciated.
    regards,
    Edited by: Antoinette Stork on Jul 1, 2008 11:23 AM

    Hi,
    Please read my earlier replies properly.The error you are getting is mainly because of the addresses of the ORG UNITS and not employees not being maintained on the R/3 side.
    The addresses of the org units are stored in infotype1028 on R/3 side.So you need to maintain this one on the R/3 side before starting the replication.Take the help of someone from the HR team for maintainence of this address data.
    Regarding the switches in SRM,there is one in table  T77S0 i.e. HRALX OADRE Address Necessary for Business Partner?.However this is used for generation of BP for the org units which i suppose is happening for you..See the foll note for more deatils .
    Note 550055 - EBP/CRM: New integration for business partner
    For this paarmeter,the note says;
    Addresses: If addresses are required to generate correct business
    partners of the organizational unit role (in SRM, for example), the
    HRALX/OADRE switch is set to X (formerly: the BUPA/ADDR switch). If
    it is mandatory for each business partner of the organizational
    unit role to have an address, but the relevant organizational units
    do not always have a separate address, you can define a standard
    address. Create a separate business partner for storing the
    standard address. The number of this business partner, which is
    used as a container, is stored in the HRALX/OADBP switch (formerly
    BUPA/ADRBP).
    However the address error which you are getting is because the employee for the Org unit which gets created doesnt get the address because of the missing address of the org structure.So the BP of the employee (for org unit) is inconsistent.
    So i dont think changing the value of this switch would help you resolve the EMPLOYEE ADDRESS error.Again i suggest better to maintain the addresses of the org units in R/3 in infotype 1028 and then replicate the whole org structure again.Then you should not get the address error.
    BR,
    Disha.
    Do reward full points for useful answers .

  • Challan mapping not happening for employees belonging to certain per. area

    Hi,
    we are facing a problem with challan mapping for employees belonging to certain personnel areas.
    For other it is happening correctly.
    Any suggestion for the above issue?
    thanks,
    Ayyaps

    Hi,
    Check the feature 40ECC for the Personnel Areas for which challan mapping is not being done. The TAN returned through this feature should be same as the one used in the second screen of challan mapping. If both the TAN matches, then only you will be able to map challan with the employees.
    VK

  • Display discounts and surcharges  for the same vbeln in the same row

    hi experts
    i have to display one discount and surcharges for one vbeln, posnr and one material,
    i have used konv-kschl for condition type and konv-kwert for condition value.
    in my output the conditions what i have given for discounts and surcharges its matching and displaying in different lines for the same vbeln and posnr. usually i should get one line of outputfor one vbeln, but iam getting 3 times repeated
    (one without discounts, surcharges,
    second : same vblen, posnr with discounts,
    third : same vblen, posnr for surcharges )
      please modify the internal table and  conditions below what i have given in my object.
    DATA : BEGIN OF it_konv OCCURS 0,
    knumv LIKE konv-knumv, "Number of the document condition
    kschl LIKE konv-kschl, "Condition type
    kwert LIKE konv-kwert, "Condition value
    kbetr LIKE konv-kbetr,
    kposn LIKE konv-kposn,
    discounts LIKE konv-kwert,
    surcharges LIKE konv-kwert,
    hkunnr LIKE knvh-hkunnr,
    kunnr LIKE knvh-kunnr,
    END OF it_konv.
    LOOP AT it_konv INTO wa_konv.
    CASE wa_konv-kschl.
    WHEN 'ZD01' OR 'ZD02' OR 'ZD03'.
    wa_konv-discounts = wa_konv-kwert.
    WHEN 'ZEXP' OR 'ZEXW' OR 'ZCAF' OR 'ZCAP' OR 'ZCAQ'
    OR 'ZS01' OR 'ZS02' OR 'ZS03'.
    wa_konv-surcharges = wa_konv-kwert.
    WHEN OTHERS.
    DELETE it_konv WHERE kschl = wa_konv-kschl.
    ENDCASE.
    MODIFY it_konv FROM wa_konv TRANSPORTING discounts surcharges.
    CLEAR wa_konv.
    REFRESH wa_konv.
    ENDLOOP.
    As per one of the abap expert who responded to my query is the following.
    DATA : BEGIN OF it_konv OCCURS 0,
    knumv LIKE konv-knumv, "Number of the document condition
    kschl LIKE konv-kschl, "Condition type
    kwert LIKE konv-kwert, "Condition value
    kbetr LIKE konv-kbetr,
    kposn LIKE konv-kposn,
    discounts LIKE konv-kwert,
    surcharges LIKE konv-kwert,
    hkunnr LIKE knvh-hkunnr,
    kunnr LIKE knvh-kunnr,
    END OF it_konv.
    DATA : BEGIN OF wa_konv OCCURS 0,
    kposn LIKE konv-kposn,
    discounts LIKE konv-kwert,
    surcharges LIKE konv-kwert,
    hkunnr LIKE knvh-hkunnr,
    kunnr LIKE knvh-kunnr,
    END OF wa_konv.
    move '1' to it_konv-knumv.
    move 'ZD01' to it_konv-kschl.
    move '1200' to it_konv-kwert.
    move '0010' to it_konv-kposn.
    append it_konv.
    move '2' to it_konv-knumv.
    move 'ZEXP' to it_konv-kschl.
    move '1300' to it_konv-kwert.
    move '0010' to it_konv-kposn.
    append it_konv.
    move '3' to it_konv-knumv.
    move 'ZEXP' to it_konv-kschl.
    move '1400' to it_konv-kwert.
    move '0010' to it_konv-kposn.
    append it_konv.
    LOOP AT it_konv.
    MOVE-CORRESPONDING it_konv to wa_konv.
    CASE IT_konv-kschl.
    WHEN 'ZD01' OR 'ZD02' OR 'ZD03'.
    wa_konv-discounts = IT_konv-kwert.
    WHEN 'ZEXP' OR 'ZEXW' OR 'ZCAF' OR 'ZCAP' OR 'ZCAQ'
    OR 'ZS01' OR 'ZS02' OR 'ZS03'.
    wa_konv-surcharges = IT_konv-kwert.
    ENDCASE.
    COLLECT WA_KONV.
    CLEAR wa_konv.
    ENDLOOP.
    But to try according to the above, i dont have the values for kwert, i know only the condition type (KSCHL). based on this how can i solve my problem
    please clarify
    thanks in advance

    Refer to the suggestion given by Naimesh here Can we modify a sub-total in ALV making use of function GET_GLOBALS_FROM_SLVC_FULLSCR and the method GET_SUBTOTALS. You can see the parameter ep_collect01 refered in case of subtotals. Can you please check ep_collect00 for grand total in your case.
    As said about EP_COLLECT00,here goes a classic example Modify grand total in ALV GRID
    BR
    Keshav
    Edited by: Keshav.T on Sep 21, 2011 9:39 AM

  • Generate Letters for Employees through Desktop Integrator

    Hi,
    I would like to generate letters like(Releving, Confirmation and experience) for employees using Web ADI.
    Can i use Contract Letter Type to generate the above said letters for the employees?? If yes can anyone please provide some documents.
    Navigation:
    When I navigate to Custom HRMS responsibility----> Work Structures----> Contract Letter Type, Assignment Staus is not enabled wheres in Recruitment Letter Type assignment status for the applicants is enabled.
    Regards

    Pl see if these MOS Docs can help
    Understanding and Using Web ADI in Oracle HRMS          (Doc ID 360105.1)
    Web ADI for Oracle HRMS R12 Implementation and Configuration Information          (Doc ID 394265.1)
    Creating Word Documents using Web ADI (Doc ID 462942.1)
    HTH
    Srini

  • Demonstrate the ability to transfer for employee Payment/bank transfer

    Hi all
    Here I need to show few demonstrations. For time being I have to demonstrate the below one.
    *“Demonstrate the ability to transfer for employee Payment/bank transfer*”
    Kindly give me support to executive the above demonstration with your experience.
    Thanks for your time in advance

    Hi Gaurav
    I am thank ful for your time
    I am suppose to demonstrate on UK, India.
    And also help me what is the procedure to view pay slip through SSHR after running payroll (UK Legislation )

  • Appraisal: Editability settings for employee

    Hi,
    I have a small query in the editability settings for employee in Appraisal.
    All my status flows are properly working. The employee declares goals and objectives in the beginning of the year, the appraiser approves/rejects. If the appraiser rejects, employee has to correct the goals and objectives. I have made the criterion and the ratings invisible till the appraiser approves (since I have made the ratings mandatory). The employee writes against each of the criterion, just before the appraiser rates at the end of the year. The appraiser rates against the criterion. The reviewer rates against the criterion. The cycle is completed.
    My question:
    1. After the employee writes something against the crtieria, the appriaser rates at the end of the year. If the employee logs into the portal after the appraiser rates, he is able to edit what he has written against each criteria. How to make this non-editable for the employee once he has written and the appraiser has rated him against the criteria?
    After the reviewer rates the employee anything in the template is becoming non-editable for employee, appraiser and reviewer since it is in the status completed which is absolutely fine.
    Please help.
    Regards,
    Sasi.

    Hi Sasi,
    My question:
    1. After the employee writes something against the crtieria, the appriaser rates at the end of the year. If the employee logs into the portal after the appraiser rates, he is able to edit what he has written against each criteria. How to make this non-editable for the employee once he has written and the appraiser has rated him against the criteria?
    I am sure you must be having different substatus for above scenarios. Please ensure, when EE is logging into system in particular status and substatus you are making EE's coulmn as editable and for all other status subststas combination, it is in Display mode only.
    Hope this helps.
    Thanks!
    Regards,
    Chetan Shriraj Wahane

  • Everytime i log into facebook i get an Alert message "This build is only enabled for employees"??

    Is anyone else getting this message when logging into facebook? This build is for employees only?

    Delete the app from your iPhone. Hold down the app until it jiggles then tap the circle with an x it it then tap Delete.
    Restart your iPhone.
    Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    Then tap the App Store icon and re download the FB app.

  • SharePoint Foundation 2013 - report / chart / Graph for Employee vacation.

    In SharePoint Foundation 2013 I want to create a report / chart / Graph for Employee (Employee Id,Employee Name & Department) which will show month wise from which date to which date Employee are on vacation in particular department.
    I'm thinking to create one List where where user will enter there vacation details and from that list report I will create chart / Graph Department wise to check the Employees availability.
    Please provide some good example or idea in detail for this.

    Hi,
    Chart Web Parts are useful for visually representing data in line charts, bar charts, and other views. Charts enable you and other users to view performance information at a glance.
    In SharePoint 2013, chart web part is one of the discontinued features. We usually use Excel Service to replace it, however, Excel Service is only available in Enterprise edition, so we need to figure out coding methods or third party tool if you are using
    Foundation edition.
    Here are some links for workaround in your situation, please check if they can be help:
    http://sivarajan.me/post/SharePoint-2013-Chart-WebPart-Using-HTML-5-RGraph-with-WCF-REST-Services
    http://charts4sharepoint.codeplex.com/
    Regards,
    Rebecca Tu
    TechNet Community Support

  • In R12, can payroll user enter expense report for employees via web-based?

    Hi,
    In R12, can payroll user enter expense report for employees via web-based screen? Previously in 11i, it can be done via the Expense Report forms.
    Appreciate advise on this.
    Thanks in advance.
    Regards,
    Shiau Chin

    Hi Anne,
    Please see page 42 of the [url http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120oieig.pdf]iExpenses Implementation and Admin Guide for R12 . If you are unable to enter the ID as per the guide, I would suggest raising an Service Request with Oracle Support.
    Cheers, Pete

  • Unable to open document. Please check to see if you have read permission for the above file.

    System:
    Adobe Acrobat X Pro, 10.1.2
    Windows 7 Enterprise, 32-bit
    Quad Core badass CPU
    4GB RAM
    MS Word 2010 (Office 2010)
    I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
    When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
    "Unable to open document:"
    "[document location]"
    "Please check to see if you have read permission for the above file."
    This happens after the little notice pops up "Starting the application which created the document...."
    If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
    It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
    "I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
    I have updated to the latest version 10.1.2 and still have this problem.
    This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
    This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
    If anyone has found the solution, please post it here.
    Thanks!
    B

    I think I found a solution. It seems to be relatet to normal.dotm.
    In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
    The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
    (By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
    I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

  • Error in create a new absence for employee

    Hi experts
    I have been already config all steps on IMG but i can not create a new absences for employee by IT2001, the error message below "no qouta available for att/abs (absence type) for (Emp No.) between (start_date) and (end_date)". I haven't see any record on Absences Quotas(IT2006).

    Hi,
    Check in Table V_554S_Q if the absences type is checked for Quota deduction or not. If yes then check to which Absence quota it is linked & then create that Absence Quota in IT-2006.
    Regards,
    Prasad Lad

  • Populate Error Message while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee

    Hi Team,
    We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
    We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
    Please suggest how to do this.
    Thanks,
    Ravi

    Hi Rajesh,
    Thanks for the reply...
    We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
    So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
    Thanks,
    Ravi.

  • Problem with creating Edit page for employees , based on otn tutorial

    Hi
    Thank you for reading my post
    I used one of oracle tutorial and create a jsf page which contain a for for departments
    and a table for employeed ( I used visual and declarative development with oracle jdeveloper)
    Now i want to add an edit page to my jsf project which allow me to edit an employee
    to do this : I add a jsf page , I add editing form (the edit form work well , I mean which i change the data and press submit it change the data in database)
    now the problem is that i want to link this two page
    in a manner that when user select an employee from table and pressed edit button ,
    it shows edit page with that employee as "under edit" employee
    here is the link that i used to learn this stuff.
    http://www.oracle.com/technology/products/jdev/viewlets/1013/jdev_overview_xp_viewlet_swf.html
    Thanks

    Basically you create a JSF Page Navigation diagram and drag on you customerList page and your Edit Customer page. Add an "arrow" to link the two pages and name this arrow EDIT.
    Then drop a button onto the CustomerList page and the ACTION property will not have a drop down list and you select EDIT (which is the name of the arrow you created).
    Simple steps available using the workshop on the right hand side of the page
    otn.oracle.com/formsdesignerj2ee
    Regards
    Grant Ronald

  • How to maintain Service Arrangements for employees in CRM 5.0

    Hello,
    in the CRM documentation on help.sap.com (http://help.sap.com/saphelp_crm50/helpdata/en/da/7d808043d244cf806dcf0d6e69381e/frameset.htm) it is mentioned that one can maintain service arrangements for employees. These service arrangements contain - for example - service areas and qualifications of the employee (ressource).
    I know where to maintain the customizing values, however, I didn't find out where to maintain the service arrangements for the employees.
    Any idea?
    Thanks & regards
    Wolfgang

    Hi ,
    for this you need to go to trnasaction PPOMA_CRM - Maintain Organizational Model
    and in this you need to open your organization model and there you need to assign employees.
    for this you need to select the post and right click on that and there is assign filed is there. after selecting that there is two position holder and owner.
    so you select holder for the position. then you can assign the employee to that service area.
    thanks
    hemant

Maybe you are looking for