Surround sound with Venturer 5.1 surround system with converter jack?

Hi, i need help.. I have a sound blaster x-fi extreme sound card and i can't seem to get surround sound out of it. i have a surround system that outputs two rca jacks (red for right and white for left) and i have a jack similar to this?to convert it to a 3.5mm jack to plug into my sound card. when i plug it in, it doesn't recognize the surround sound and it doesn't play on the back two speakers.

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

Similar Messages

Lucreate fails with update 8 packages on system with zone

I have a Solaris 10 update 7 system with a single zone. Before installing the update 8 LU packages I was able to create a new BE without error. After adding the packages, lucreate gives the following error:
Creating clone for <rpool/ROOT/10u7ZFSa/zoneRoot/common@10u8> on <rpool/ROOT/10u8/zoneRoot/common-10u8>.
cannot mount 'rpool/ROOT/10u8/zoneRoot/common-10u8': legacy mountpoint
use mount(1M) to mount this filesystem
ERROR: Failed to mount dataset <rpool/ROOT/10u8/zoneRoot/common-10u8>
legacy is not an absolute path.
WARNING: split filesystem </> file system type <zfs> cannot inherit
mount point options <-> from parent filesystem </> file
type <-> because the two file systems have different types.
Any clues?

Hi Ish68,
It looks like the previous uninstallation didn't go through completely and that might cause conflict during the new installation. It is recommended to remove the program manually from Control Panel and if it still fails you can try to run the standalone uninstaller from F-secure. You can refer below link for the steps:
Uninstallation steps :
https://community.f-secure.com/t5/Security-for-PC/How-do-I-uninstall-the-product/ta-p/15384
Installation steps for F-Secure SAFE :
https://community.f-secure.com/t5/Security-for-PC/How-do-I-install-Internet/ta-p/43585
Thank you.

YES!!! 5.1 Surround Sound in Vista! THANK YOU CREATIVE

I installed Vista a few months back to evaluate it and liked a lot of things...but never could get the 5.surround sound to work on my Dell system with an integrated sound card. I went out and bought an inexpensi've Creative Audigy SE card in hopes that it would work. It didn't. Like everyone elses posts, the Vista config tool let me test all the speakers successfully, but wouldn't utilize them when playing music. I kept checking the Creative site looking for updated drivers and upon each install I found myself more and more discouraged at the lack of support. But today, I downloaded and installed "Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077" and YES
!!! I have surround sound again. There is one manual step post install: Enable CMSS-3D in the Console tool. I can handle that. Thank you Creative for doing something Microsoft couldn't (or refused) to do. It sure seems like a basic thing to a novice like me...make my speakers work in Vista the way they worked in XP. Today is a good day.

LoL..if only you have an Audigy 2 card like me or other cards, you'd probably say other things

How to make a 5.1 Surround Sound Blu-Ray with FCP

Being disappointed that FCP only makes Blu-Ray discs with a stereo soundtrack I decided to find a way to make one with my 5.1 soundtrack. After hacking the build process by replacing the stereo AC3 file with a 5.1 version while it was still making the video file I stumbled on a very simple method of making a 5.1 Blu-Ray.
In FCP, choose Share and select Blu-Ray. Check the box that says something like "burn Blu-Ray disc". When the project is ready to transcode and burn, hit the "Send to Compressor" button. Once in compressor, right-click on the Dolby Digital 2.0 setting and select "Edit Setting" (or "Change setting", not sure which, my FCP machine somewhere else at the moment) and browse to the 5.1 Dolby Digital setting. Select it and submit the job. When done, you'll have a 5.1 Blu-Ray disc of your project.

There is no way to create a real Dolby sound unfortunately. The mac currently only supports 2 channel outputs. There are interfaces you can buy that will separate the bass and send it to the subwoofer, and fake a 5 channel sound field, but ultimately it will only run 2 sets of stereo speakers, and one mono in the middle, so it is not true surround sound.
Here's a similar thread with more information if you are interested:
How can I connect 5.1 speakers to Macbook Pro 13 bought Summer 2011
I wish there were a way to do it, I personally am a recording musician and an audiophile, and have looked for the same thing on several occasions. But unfortunately at the time, it seems as though there is not the hardware to do it.

Surround Sound speakers don't work with ITUNES 7

My surround sound speakers have worked with my computer since I got them and still are working. However, when I upgraded to ITUNEs 7 suddenly only the front speakers work, this only happens on ITUNEs and nothing else. What is going on and how can I fix it?

My surround sound speakers have worked with my
computer since I got them and still are working.
However, when I upgraded to ITUNEs 7 suddenly only
the front speakers work, this only happens on ITUNEs
and nothing else. What is going on and how can I fix
it?
I have surround sound speakers and mine are working fine with iTunes 7. Now, I don't want to state the obvious, but my surround sound speakers have a bass box attached and the leads go into the back and sometimes they come loose. You've probably already checked this but I thought it worth a a mention.

Best Surround Sound Setup for MBP

Hi, I recently bought the new MBP and am looking into getting some good speakers for it. Does anyone have any suggestions as to which logitech speakers would sound the best on it, and what type of cords I would need in order to have surround sound? Also I am not trying to break the bank here, so the probably the best speakers for the money would be the best selection.
Thanks

I've found the Logitech Z-5500 are a great bang for the buck. They're a bit pricey for computer speakers but they put out plenty of power and sound quite decent for a complete system with decoder, amp and speakers. The controller pod has an optical input that will take any standard optical S/PDIF signal, like that of the MBP (using the right cable; lots of TOSlink optical cables come with little TOSlink to 1/8" optical adapters and you need that for the MBP connection). It does Dolby Digital and DTS decoding in 5.1 format.

Hdmi cable only produces sound to tv..not surround sound

Hooked up apple tv today and the sound works only from the tv...not from the amplifier...the tv works through it but not with apple tv...am I supposed to do something special to connect them? Thanks...

there have been posts like your many many many times
in this forum
I can't comment from personal exp as I don't use surround but
most reply's to posts like yours seem to be that your expectations of what will provide
surround sound audio differ from what does comes with surround audio
it be a mix of trailers not having 5.1
to your media converts not being don in a way the atv support

Setting Up Cable Box for Surround Sound

I have a Pace Set Top box, the T-7900 speakers and the Audigy 2 ZS.
The Pace box has a left and right output and a digital optical output. Is there anyway of setting up this system to enable surround sound?
I could obtain a 3.5mm converter to connect the L and R to the wired remote. If I used the CMSS 3D feature of the Audigy would the sound then be in surround?
I hope this is understandable!
Feel free to suggest any alternative setups that could work.
Thanks!

You'd have to have the Y-adapter input into the Audigy to use the CMSS, I think. Inputting it through the T7700 line-in will have it play stereo.

ITunes and 5.1 surround sound problem

The iTunes won't play my music in 5.1 surround sound. Now my PC is equiped with sound card capable of producing 5.1 surround sound and my windows media player is playing my music files in full surround sound. iTunes on the other hand won't do it for some reason.
All my sound and audio options in control panel are on 5.1 surround sound so i don't know what's going on with my iTunes...also all other programs play my audio and video files in full surround sound.
How do i get the iTunes to play my music in 5.1 surround sound?

If the files are just standard stereo MP3 files, iTunes is only going to play them to two speakers. Windows Media Player may do some kind of procesessing of the stereo signal to simulate surround sound and play to 5.1 speakers, but iTunes does not do that.
iTunes will play true DTS 5.1 channel audio files under certain conditions, but those are special files, not just standard MP3s.

Can't get surround sound to work, all speakers pl

This is driving me nuts.
I have surround sound speakers and everything was working fine with them and my SB audigy card.
However I had to move the card over one pci slot to make room for my video card cooler.
After doing this I uninstalled the card/drivers and reinstalled them and what not.
However now I have no surround sound. I simply get sound from all the speakers the same.
I run the speaker test through the surround mixer/audio hq where it goes through each speaker to test it. The sound on that comes from every speaker even though it shouldn't. However my back right speaker doesn't have anything come from it during this test, but it plays sound from everything else.
I have both the surround mixer and windows set to use surround speakers, etc as it should be.

I fixed part of my problem.
I must have hit the rear wire or something because it was loose and I plugged it all the way back in and now my surround works how it should.
However the rear right speaker doesn't work right. I don't know why but it's like someone has the volume specifically turned down on it (like literally 98% down) only and the other speakers are normal.
However if I move the rear right speaker (on the subwoofer) an dplace another speaker in it's place, it will work fine. So it's not so much that speaker as it seems to be specifically the subwoofer connection for the rear right speaker.

Does new mini offer surround sound output?

Earlier mini offered 5.1 surround sound output thru headphone jack. Does new 2014 Mac mini offer surround sound through any of its' outputs, including the headphone jack?

You can get 5.1 out the the HDMI putput.
https://discussions.apple.com/thread/3039345?tstart=0
The headphone jack also includes an optical audio out that supports 5.1. Yo need:
http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6
http://www.monoprice.com/Product?c_id=104&cp_id=10428&cs_id=1042802&p_id=6331&se q=1&format=2
http://www.amazon.com/Recoton-Fiber-Optic-Toslink-Adapter/dp/B0002MQGRM/ref=sr_1 _1?s=electronics&ie=UTF8&qid=1416233638&sr=1-1&keywords=toslink+to+mini+optical+ adapter

Oracle Apps Integration with SeeBeyond Tool to Legacy System

We have client using SeeBeyond a third party Integration Tool. The client is planning to implement
Oracle HR. They want to integrate Oracle HR with third party Legacy payroll system with the SeeBeyond Tool. SeeBeyond tool is very similar to Oracle Advance Queing Tool. I want to know any Oracle Products
interfaced with SeeBeyond Tool. Please let me know if any one used this tool.

Hi,
I'm going to Integrate EBS with OSSO. I found a command line in a document to register EBS with Oracle AS Infrastructure:
txkrun.pl -script=SetSSOReg -provtmp=$FND_TOP/admin/template/ProvOIDToApps.tmp
After I run that, I got this error:
*******FATAL ERROR*******
PROGRAM : (/oracleproduct/ebs/VIS/apps/apps_st/appl/fnd/12.0.0/bin/txkrun.pl)
TIME : Wed Feb 10 11:29:05 2010
FUNCTION: TXK::Common::doError [ Level 1 ]
ERRORMSG: Undefined args are not allowed. The following args are not required : provtmp
And after I run
txkrun.pl -script=SetSSOReg
without provtmp, it passed.
But I cannot start Oracle AS Infrastructure anymore. It reports opmn error.
If I use your line: txkrun.pl –script=SetSSOReg –provisiontype=3
it comes out another error:
ERROR processing <arg> script : Argument value cannot be an empty string
*******FATAL ERROR*******
PROGRAM : (/oracleproduct/ebs/VIS/apps/apps_st/appl/fnd/12.0.0/bin/txkrun.pl)
TIME : Wed Feb 10 11:31:25 2010
FUNCTION: TXK::Common::doError [ Level 1 ]
ERRORMSG: ERROR processing <arg> script : Argument value cannot be an empty string
So do you have any idea on this?
Thanks!

Can I run a LabVIEW 7.1 Application on a system with LabVIEW 6.1?

The VI App did not run properly, even after I installed the LabVIEW 7.1 Run time engine. Perhpas I need to uninstall the LV 6.1 run time engine? Thank you for any suggestions; perhaps it's something minor that I'm overlooking!

That shouldn't be a problem assuming that all the drivers (VISA, NI-GPIB, etc.) you need are installed. I haven't run a 7.1 exe yet but I've done it with 7.0 executables on systems with 6.0 and 6.1 development. What was the actual error code generated?

Can you use surround sound 5.1home theatre systems with iMac 27"?

Can you use surround sound 5.1 home theatre systems with iMac 27"? I was thinking of using my iMac as an internet television as well as home pc. thanks

NZane-
Greetings and welcome to the Apple boards.
The Mac puts out encoded 5.1. It is the function of the amplifier, receiver or decoder to take that signal and turn it into something useful. At minimum you will need a device that can accept that output and turn it into something useful.
Most studios that I am familiar with want to be able to use their own 5.1 decoder, amp and speakers. Juicier sound!
Luck-
-DaddyPaycheck

How do I connect my Apple TV to my Philips surround sound DVD system?

I can't seem to get surround sound when watching Apple TV (or when watching live or recorded TV via my Virgin Tivo). I use a three-years old Philips DVD home surround system to get surround sound when I'm watching Blu-Ray (I have connected my Philips Blu-ray and my Philips DVD player without difficulty). But I can't figure out how to get surround sound whne watching Apple TV. I bought an optical cable with an audio jack on one end, to connect to the DVD player and the optical end clicks into the ATV. Still nothing. Any ideas?

The surround system seems to support digital audio - it has settings for HDMI audio and video (even though it doesn't actually have an HDMI port) I bought the optical/audio cable on the advice of a staff member in the Apple Store, but frankly, she didn't see, to understand my problem. She recommended I insert the cable into the "MP3 cable IN" port but that' not working.
I'm probably not explaining myself very well - bottom line: I have a DVD surround system and an Apple TV, so how do I connect them?

Surround sound with Venturer 5.1 surround system with converter jack?

Similar Messages

Maybe you are looking for