Survey portlets that can only be used once

All, I would like to create a survey portlet (or use an existing one) to do the following:
1) A user could define the criteria of the survey through a simple interface (i.e. data form)
2) The end user would see the survey on their default home page (this part is pretty simple).
3) Once the user responds to the survey, the survey portlet is replaced on the users home page by the results of the survey and the user can no longer respond to the survey (enforce a "respond-once" policy).
Questions: Does a portlet like this already exist? If so, where can I find it? If not, what is the easiest solution for creating this type of functionality?
Thanks,
Jon.

Hello, Not sure if this functionality already exists or not, but what you can try doing is this.
1. create a group with all users who are to take the survey
2. set permissions on the survey portlet to only allow people in this group to take the survey
3. With the assumption that you're dumping this data to a database table, create a trigger that will remove the user from the group when the user does a submit. (you can get the current user using portal.wwctx_api.get_user in the trigger). I can not think of it right now, but there are api's which you can call to remove a user from a group.
I hope this helps.

Similar Messages

Condition type PR00 can only be used once

Hi Experts,
Im faced with a strange problem. Request your help in resolving it.
I tried to create my own pricing procedure by copying from RVAA01. Then i deleted all the steps and created my own steps. But when im trying to save the document, it says PR00 can only be used once. I deleted this condition type and tried to save it, it again says K004 can only be used once. Even after deleting all the earlier conditions which i copied from RVAA01, why am i getting this error.
Your help is most appreciated.
Warm regards,
Sarat.

You have deleted a row (i.e. condition type, say PR00).
After that click icon "Save".
Then when you create condition type PR00, system shall accept it.
Currently, you are deleting a condition type (PR00) but it is still "in memory" of the pricing procedure. You can not create the same condition type more than once in a pricing procedure. Therefore you can not create PR00 again & you are getting the error message.
First remove PR00 from the memory of the pricing procedure by clicking "Save", & then you can re-enter the same cond type.

Alternatives can only be used once?

Hi
In the Adobe form when creating an alternative I've discovered that it can only be used once.
Is this correct?
I've created an alternative e.g. name = FLAG_IS_X condition flag = X.
When I use the alternative 'FLAG_IS_X' the first time it works as required.
However, when I use it a second time on the form it does not work at all.
Does this mean that a different alternative with the same condition has to be created even though the condition you want to use is the same?
Thanks

Hey,
Well I stumble it seems on the same 'issue' . I have 3 master pages and have the requirement to put a watermark on it depending on the status. The first master is in portrait and contains the contact details, the second master page contains the line items and is in landscape and the third one contains the totals and is back portrait.
First I had only one alternative and used it on the 3 masterpage to check if the watermark had to be printed. In this case it was only correct for the first page (contact-info) the rest all received the mark although they should not.
Then I made 3 altenatives (one for each type of master page) all checking the same condition.
This way it was correct for page 1 (contacts), the first page of the items (the two others had the watermark although they should not - so not correct) and the last page with the totals.
In my case the contacts-page and totals-page can only have a page-count of 1 but I'm almost sure that if they could have a page count of 2 or more then only the first page would be correctly printed.
Is this a bug you think?
Faaiez,
Did you find in the end a workaround for this?
Otto.
Any suggestion of how I could handle this with scripting (no experience with scripting though)
Anyway tnx already for all the input !!
best regards,
Bart V.

I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its sasy the cose can only be used once. I dont have the movie and now i cant get it at all.

I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its says the code can only be used once. I dont have the movie and now i cant get it at all. i paid for it when i bought the movie but now i dont own it at all. i feel cheated, somebody please help!

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Creatig a .pdf that can only be printed once

Hello, I am looking to create a coupon for my website's email club, but I'd like to make it so the coupon can only be printed once. How do I go about doing that? I know how to add a password and make it unprintable, but not print once. Thanks for any help.

Probably not possible at all, but if it is, it's with a DRM product which costs thousands of dollars.

Material can only be use once on Purchase order

Dear SAPfans,
can we set the material only be use once in purchase order and cannot use for the second time in one plant?

hi Nizam,
If I am not wrong then you mean to say in 1 PO for one plant material should be entered once only
like say you have plant A and plant B and Material XYZ so in po material should be entered as
XYZ         Plant A
XYZ         Plant B
and it should not happen like
XYZ         Plant A
XYZ         Plant B
XYZ         Plant A
XYZ         Plant B
right????
As far as i know this is not possible we can not restrict this

Solution to buttons only being used once?

Howdy.
I've been using Captivate 4 for several E-Learning type (10 x 50page) modules recently and have hit a rather hefty wall of frustration.
- I have several interactive sections within a Captivate module and several slides have clickable areas and text entry boxes in them.
- I have a very basic navigation image button sitting at the bottom right hand corner of the screen for 'next slide'
(and for the most part this is all thats needed)
- However, there are several slides where multiple actions must take place to proceed to the next slide, and I would like the users to 'scan' through these steps if they wanted by using the button sitting at the bottom right hand corner. Unfortunatley I have found that if I have the image button set to 'Continue' it will proceed to the need action, text-entry, click box etc (which is what I want) but the button can only be used once, meaning they can't 'Continue' passed and onto the next interaction, but the next slide (Not what I want) and therefore skipping several steps.
Is this 'one-time only' button usage a normal function ? (or one that can be altered ?)
Skipping through several steps smoothly on the one slide via image button would be Extremely helpful to this module! It seems that placing many copies of the same button at each interval might have been a solution, but it wasn't (and also an extreme pain in the A.)
Has anyone had solutions to a similar issue ? (the best I could come up with was 'Going Home')
I get the feeling there is a simple solution hiding around the corner (please prove me right!)
Any help would be most appreciated.
CP.

Hi there
In addition to what Lilybiri offered, here is another thought.
All interactive objects such as Click Boxes, Buttons, Text Entry Boxes and Question Slides will normally Pause playback until the end user interacts with them. Then they normally follow whatever action has been assigned to them.
I might suggest setting the pause point very late in the slide time for your button. Either that or configure it so it isn't even available to be clicked until after the user has interacted with the last element. Then make the Button available. Before then you could insert a dimmed or "grayed out" button in its place as an image to indicate it's there, but not active.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HT1420 I've had two laptops die within the last seven months. Last time I had to deauthorize all five and re-up; now I need to do it again but I understand it can only be done once every 12 months. Is there any other way to just deauthorize the ones that

I've had two lapstops die within the last seven months. Last time I had to "deauthorize" all five computers, then re-up, since I couldn't deauthorize from the dead laptop. Now I need to go through it all again, but I understand that this can only be done once every 12 months. What else can I do? Can I get into the account and just deauhorize the dead computer?

You can try contacting Apple and explain that you have been using Windows PCs that last only a few months before failing. Perhaps they will make an exception to the 12 month wait.

I've had to reset my laptop to factory settings a few times recently and now I realise that i have auth'd my iphone to my laptop 4 times now (i can only do this once more). Is there anyway of de-authing my laptop without being having access to itunes?

I've had to reset my laptop to factory settings a few times recently and now I realise that i have auth'd my iphone to my laptop 4 times now (i can only do this once more). Is there anyway of de-authing my laptop without being having access to itunes on my laptop to do this?

Without access, you're gonna have to wait until you reach the 5 authorized computer limit, then you can de-authorize all.
http://support.apple.com/kb/ht1420

I have a newer MacBook Pro with an AMD processor. It is my understanding that Parallels can only be used on Mac's with Intel Processors. Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

I have a newer MacBook Pro with an AMD processor. It is my understanding that Parallels can only be used on Mac's with Intel Processors. Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

Then it either is a pirate clone or you are misinformed.
Apple Computer has never used AMD processors in its products.
However, the Graphics Processing Unit (GPU) is a Radeon unit, which is an AMD subsidiary. Parallels, VMWare, VirtualBox will all work fine with the Intel Core i7 or i5 CPU that powers the Mac, and use the AMD Radeon GPU that drives the displays.

Can only open firefox once, have to restart to open more than one browser. can't upload any pictures the box doesn't pop up, my browser settings are diff now

Firefox just changed out of nowhere. I can only open firefox once... I used to have atleast 2 browsers up using them both on different sites, but now I can't have but one firefox browser up (not tabs, but firefox pages) Also when I am trying to upload images on ebay or any other site nothing happens... nothing pops up. I click it over and over and nothing even pops up. This is exactly what happens with the firefox browser in my first question... I can click the firefox icon a million times and nothing comes up. My tabs are all gone and it doesn't show anything like I had before this all changed? Did I reset everything some how? I do not recall clicking anything to go back... I do remember clicking an update because it kept poping up so I did it and that is the last thing I remember before this happened! UGHHH!

As I asked previously are you able to have tabs open as a window by using the right clicking option ?
When you close Firefox you should use
*'''Firefox button -> File -> Exit '''
Are you doing that ?
I suspect what may be happening is Firefox is hanging as it closes down.
* see [[Firefox hangs or is not responding - How to fix#w_firefox-hangs-when-you-quit-it]]_firefox-hangs-when-you-quit-it
* this explains how to check & if necessary kill the process [["Firefox is already running but is not responding" error message - How to fix it#w_end-firefox-processes]]_end-firefox-processes
A related possible problem is that you may have built up many copies of the restore files. These are stored in the Firefox profile. The easiest method of finding the profile location istouse
*use '''Firefox button -> Help -> Troubleshooting Information -> [Show Folder]'''
*see [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
You need to look for the files ''sessionstore.js'' and numbered duplicates of that. Delete them.
* see http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files

What r the diff. error that can be solved using RSRV tcode?

Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
[email protected]
Thanx in advance,
ravi.

Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik

My problem is trying to restore my iphone 4s. The icloud password is from a defunct email account through an ISP that I no longer use. I have upgraded to an iphone5s . I want to give the iphone4s to a special needs child that can make good use of it.

My problem is trying to restore my iphone 4s. The icloud password is from a defunct email account through an ISP that I no longer use. I have upgraded to an iphone5s . I want to give the iphone4s to a special needs child that can make good use of it.I am at the point of despair. I can prove where I got the 4s etc. which seems to be a requirement from postings on forums. IT IS BREAKING THIS KIDS HEART AND BREAKING MINE. PLEASE SOMEONE HELP !!

Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

GroupLayout can only be used with one Container at a time

Dear all,
I am a beginner so please don't throw rocks at me...
I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second frame extends from JFrame). Both frames are created using the designer in NetBeans, so the code for creating the GUI is automatically generated by NetBeans, so both frames use the same layout (GroupLayout).
Here is the code of the button from the main frame to start the second one:
private void manageCustomersActionPerformed(java.awt.event.ActionEvent evt) {
        // TODO add your handling code here:
        CustomerGUI custGUI1=new CustomerGUI();//CustomerGUI is the second frame
        custGUI1.setVisible(true);
}When I press this button from the main frame I get this runtime exception: Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: GroupLayout can only be used with one Container at a time. The second frame is not opened.
How should I handle this?
What I want to do: I want to have a main frame, from which I can start additional ones (the main frame must be always opened, while the additional ones can be closed after performing certain actions). I read a little about internal frames and I think this can be a solution, but I must edit the existing design...
Thank you
With respect,
Don
Edited by: don1983p on Dec 16, 2008 2:21 AM

AndrewThompson64 wrote:
There are those that maintain that JFrame should never be extended. I am not convinced, but most cases where a JFrame is extended would be better coded as simply configuring the JFrame within the main(). GUI builders such as found in NetBeans seem to extend JFrame as a matter of course.I too am not rigorous or religious about this either, but try to adhere to this as a matter of practicality and convenience, I find that if I don't extend a JComponent but rather use composition rather than inheritance, it's much easier to use objects of my class when programming in Eclipse. For instance in Eclipse (and in most IDEs), if I type my object name and then a period, it will show all of the method's available for me to use on this object. If I subclass JPanel or JFrame, I'll see a gazillion methods most I don't want to see, and thus most are clutter. On the other hand if I use composition, I'll only see a small number of methods and these will be only the methods that I want to see and need to use.

Fedex can only be used with dreamweaver using metric, not pounds (lbs)

Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
This as per their tier 2 tech suport.
They say I should just convert to metric, no joke!
Any ideas would be greatly appreaciated?
Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
Their note to me:
Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
              Silviu Ghimposanu (Adobe Business Catalyst Support)
              Apr 14 15:23
    Thanks for contacting us Michael
Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
He have added this to our internal bug tracker to be fixed for one of the future releases.
    I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
dimensions in pounds and not in KG
    Sorry for this inconvenience!
Kind regards,

If you're in US it will be in pounds. If your site is set any other country
in the rest of the world it will be metric. So BC or as you call it
Dreamweaver will look at the site country, which you set when creating the
site

Survey portlets that can only be used once

Similar Messages

Maybe you are looking for