Suspend failure on A8N-E
hey all,
this is yet another suspend problem, wondering if its anything trivial im doing wrong
simply suspend runs the scripts (as far as i can see) pretty well and seems to work, the screen turns off, some other hardware seem to shut down but essentially the system is still running at full power, which is my problem.
i've tried pm-suspend and the in built suspend button in xfce, all fail with the problems above
echo mem /sys/power/state is the same except the screen stays on with a blinking cursor in the corner
some other info:
/var/log/pm-suspend.log:
Initial commandline parameters: --quirk-dpms-suspend
--quirk-dpms-on
--quirk-vbestate-restore
--quirk-vbemode-restore
--quirk-vga-mode3
--quirk-vbe-post
Sun Mar 8 20:59:53 GMT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux sarin 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686 AMD Athlon(tm) 64 Processor 3700+ AuthenticAMD GNU/Linux
Module Size Used by
isofs 33700 1
zlib_inflate 19968 1 isofs
udf 82596 0
crc_itu_t 3840 1 udf
ipv6 260340 12
radeon 145824 2
drm 83880 3 radeon
agpgart 31572 1 drm
fuse 53020 4
joydev 11712 0
hid_logitech 11392 0
ff_memless 6792 1 hid_logitech
cx88_dvb 17668 0
cx88_vp3054_i2c 4352 1 cx88_dvb
mt352 8196 1 cx88_dvb
s5h1409 10500 1 cx88_dvb
dvb_pll 10632 1 cx88_dvb
s5h1411 11396 1 cx88_dvb
or51132 9988 1 cx88_dvb
cx24116 17032 1 cx88_dvb
nxt200x 14980 1 cx88_dvb
isl6421 3840 1 cx88_dvb
stb6000 5380 1 cx88_dvb
zl10353 9352 1 cx88_dvb
cx24123 15368 1 cx88_dvb
lgdt330x 10244 1 cx88_dvb
stv0299 11656 1 cx88_dvb
stv0288 9352 1 cx88_dvb
cx22702 7556 1 cx88_dvb
wm8775 7596 0
ppdev 9348 0
tuner 26692 0
tea5767 8580 1 tuner
tda8290 14468 1 tuner
tda18271 36360 1 tda8290
tda827x 11652 1 tda8290
tuner_xc2028 23600 2 cx88_dvb,tuner
xc5000 13192 2 cx88_dvb,tuner
tda9887 12164 2 cx88_dvb,tuner
tuner_simple 16144 2 cx88_dvb,tuner
tuner_types 16000 1 tuner_simple
mt20xx 14088 1 tuner
tea5761 6660 1 tuner
lp 11108 0
ppp_generic 25116 0
slhc 7552 1 ppp_generic
pcspkr 4352 0
psmouse 55828 0
cx88_alsa 12424 1
cx8802 16900 1 cx88_dvb
cx8800 31236 0
cx88xx 69800 4 cx88_dvb,cx88_alsa,cx8802,cx8800
compat_ioctl32 3072 1 cx8800
v4l2_common 13184 3 wm8775,tuner,cx8800
videodev 34176 3 tuner,cx8800,cx88xx
v4l1_compat 15364 1 videodev
ir_common 40452 1 cx88xx
i2c_algo_bit 7556 2 cx88_vp3054_i2c,cx88xx
tveeprom 13956 1 cx88xx
videobuf_dvb 8324 3 cx88_dvb,cx8802,cx88xx
dvb_core 81024 5 cx88_dvb,or51132,lgdt330x,stv0299,videobuf_dvb
btcx_risc 6408 4 cx88_alsa,cx8802,cx8800,cx88xx
videobuf_dma_sg 12932 5 cx88_dvb,cx88_alsa,cx8802,cx8800,cx88xx
videobuf_core 17668 5 cx8802,cx8800,cx88xx,videobuf_dvb,videobuf_dma_sg
serio_raw 7172 0
k8temp 6144 0
ohci1394 31280 0
ieee1394 79940 1 ohci1394
sg 26804 0
usb_storage 95552 0
ati_remote 11656 0
usbhid 36640 1 hid_logitech
hid 40704 2 hid_logitech,usbhid
parport_pc 37700 1
parport 33004 3 ppdev,lp,parport_pc
i2c_nforce2 8580 0
i2c_core 22804 33 cx88_vp3054_i2c,mt352,s5h1409,dvb_pll,s5h1411,or51132,cx24116,nxt200x,isl6421,stb6000,zl10353,cx24123,lgdt330x,stv0299,stv0288,cx22702,wm8775,tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,cx88xx,v4l2_common,i2c_algo_bit,tveeprom,i2c_nforce2
evdev 11296 6
thermal 17180 0
fan 6276 0
button 7824 0
battery 12036 0
ac 6020 0
snd_seq_oss 31872 0
snd_seq_midi_event 8192 1 snd_seq_oss
snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8204 2 snd_seq_oss,snd_seq
snd_intel8x0 30876 2
snd_ac97_codec 102308 1 snd_intel8x0
snd_pcm_oss 40192 0
snd_pcm 70020 4 cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 21384 2 snd_seq,snd_pcm
snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
snd_mixer_oss 16512 2 snd_pcm_oss
snd 50852 14 cx88_alsa,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 8160 2 snd
ac97_bus 3584 1 snd_ac97_codec
arc4 3712 2
ecb 4608 2
zd1211rw 46596 0
mac80211 161184 1 zd1211rw
cfg80211 31760 2 zd1211rw,mac80211
forcedeth 56592 0
cpufreq_ondemand 8972 1
powernow_k8 15364 0
freq_table 5632 2 cpufreq_ondemand,powernow_k8
processor 41388 2 thermal,powernow_k8
rtc_cmos 12332 0
rtc_core 17564 1 rtc_cmos
rtc_lib 4480 1 rtc_core
jfs 176364 1
sd_mod 26904 5
ohci_hcd 25360 0
ehci_hcd 36876 0
sr_mod 16708 1
cdrom 35360 1 sr_mod
usbcore 136848 7 usb_storage,ati_remote,usbhid,zd1211rw,ohci_hcd,ehci_hcd
sata_nv 24072 4
ata_generic 6788 0
pata_amd 12292 1
pata_acpi 6016 0
libata 157856 4 sata_nv,ata_generic,pata_amd,pata_acpi
scsi_mod 102164 5 sg,usb_storage,sd_mod,sr_mod,libata
total used free shared buffers cached
Mem: 1034812 815028 219784 0 66896 520532
-/+ buffers/cache: 227600 807212
Swap: 2096440 2832 2093608
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: /bin/stty: standard input: Invalid argument
:: ZoomWLAN down [BUSY] [DONE]
success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90chvt suspend suspend: success.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
Allocated buffer at 0x2010 (base is 0x0)
ES: 0x0201 EBX: 0x0000
success.
Sun Mar 8 20:59:54 GMT 2009: performing suspend
Hardware:
ASUS A8N-E
AMD Athlon64 3700+
ATI Radeon X1600 Pro (using radeon driver)
ZyDAS ZD1211 WLAN
Any ideas? kernel? acpi? If i need to provide any more information just ask
Thanks
The Supend to Disk page on the wiki is easy to follow, but I'll outline how I got it working just because.
First I had to install uswsusp and hibernate-script. You don't need to do anything with s2disk, but you need to configure hibernate properly to work with it. To do that was actually quite easy.
Edit the following files (in /etc/hibernate): blacklisted-modules, common.conf, disk.conf, hibernate.conf.
In blacklisted-modules, if you use nVidia, you'll need to comment out or delete the nvidia line. If you don't, you probably don't need to touch this file.
In common.conf I added a line that says "RestartServices network" (no quotes) under the "###services" section because after resuming I was unable to do anything online at first. This was the only edit.
In disk.conf just make sure the first uncommented line is "TryMethod ususpend-disk.conf". By default it should be listed first.
In hibernate.conf I commented out "TryMethod suspend2.conf", although I'm not sure this was necessary since I don't have TuxOnIce installed or configured. Other than this, make sure "TryMethod disk.conf" is listed first so hibernate knows to suspend to disk rather than RAM.
The other three files that need editing are /etc/suspend.conf, /boot/grub/menu.lst and /etc/mkinitcpio.conf.
In suspend.conf change the "resume device" line to point to your swap partition. I have "resume device = /dev/disk/by-uuid/91d8da0d-007e-42f1-bae3-d5f1741b5dd4" since I have 2 hard drives and occasionally they switch back and forth between sda and sdb, but if you have just one /dev/sdax works. You'll also point to this partition in menu.lst; on the "kernel" line make sure you add the option "resume=/dev/..." (where ... will be replaced with sdax or disk/by-uuid, or whatever method you prefer).
Finally, edit the last line in mkinitcpio.conf by adding "uresume" between "sata" and "filesystems".
After you've done all this run the command "mkinitcpio -p kernel26" as root and you should be set. A simple "sudo hibernate" (or just running "hibernate" as root) will do the job, and hopefully everything will work. I was surprised when it did, but pleased.
Similar Messages
-
Hi everybody,
Is anybody successfully using remote IBM MQseries 5.3 server as
Foreign JMS in WLS 8.1sp2?
We're observing some strange behavior in this case. Here is our setup:
WLS and IBM MQ server deployed on separate boxes.
WLS version 8.1sp2 running on Windows 2000/Intel
IBM MQ version 5.3 running on Solaris/SPARC
We're using "WebSphere MQ classes for Java, version 5.303 - j5303-L030225"
and "WebSphere MQ Extended Transactional Client Feature, version 5.300 -
j5303-L030122"
MQ files added in WLS POST_CLASSPATH variable in WLS starup script.
Foreign JMS server configured in WLS via fscontext JNDI.
MDB bean deployed with Transaction attribute "Required".
Everything seems to work fine, if we're posting message to MQ queue MDB
receives it and process successfully (just print message content to the
console for now).
Problem: In WLS console, under Server->Monitoring->JTA->Monitor inflight
transactions we can constantly see one transaction enlisted for our MDB
bean with following details:
=====================================================
Transaction ID: BEA1-00DFC5EB4B7B7F28EDB9
Coordinator: mydomain+myserver
Name: JMSMessagePoller.xxx.xxx.MyMessageProcessorMdb
Status: Active
Seconds Active: 17
Resources:
weblogic.ejb20.JMSConnectionPoller.xxx.xxx.MyMessageProcessorMdb=started
Properties
(key=value):
weblogic.transaction.name=JMSMessagePoller.xxx.xxx.MyMessageProcessorMdb
=====================================================
This transaction seems to be Active for 30 seconds and then rolled back
(no error messages on WLS console displayed).On JTA statistics page in
WLS console "Total Rolled Back" counter keeps increneting with every
rollback.
Does anybody observerd similar problem? May be it's normal behaviour but
I'm kind of worrying about those transactions and constant rollback. I'd
appreciate any feedback.
Sincerely,
Dmitri Maximovich
Hi Dmitri,
The shutdown "suspend" failure has nothing to do with transactions
or JMS. It looks like the failure is due to a
java.util.ConcurrentModificationException during undeployment
which indicates a bug in WL - something is not getting
synchronized that should be.
As for MQ, their new extended client supports remote XA, which I think
is the reason for the product in the first place. Even so, I
still recommend testing to make sure that its messages
participate in transactions. (Actually, I recommend such testing
for any transactional app, including those built on WL JMS.)
Tom
Dmitri Maximovich wrote:
> Hi Tom,
>
> Thanks for info, that's a relief. Unfortunately there is no hints in WLS
> documentation that it's normal, that's why we were worried about it.
>
> Now there is one more issue, which I believe is related. You see with
> those 'in-flight' transactions graceful shutdown of WLS doesn't quite
> work. There is suspicious exception thrown and after that WLS is still
> running in some state but console is not available anymore. Please see
> console messages attached (sorry for long post). at the time of shutdown
> there is no messages in the queue(s) so as far as I can tell those
> 'pending transactions' mentioned is those from foreign JMS wrappers.
>
> I'd appreciate any comments on that. We have case opened with BEA about
> this but so far they cannot reproduce it in their lab. That's why I
> start wondering if we're doing something wrong here, like using remote
> MQ server for example, may be you not supposed to (I remember there was
> an issue before with IBM MQ that XA support required binding mode, I was
> kind of hope that it's not the case anymore)?
>
> <Mar 3, 2004 1:47:56 PM EST> <Notice> <WebLogicServer> <BEA-000365>
> <Server state changed to SUSPENDING>
> <Mar 3, 2004 1:47:56 PM EST> <Info> <Deployer> <BEA-149236> <Preparing
> to suspend.>
> <Mar 3, 2004 1:47:56 PM EST> <Info> <Deployer> <BEA-149237> <Ready to
> suspend.>
> <Mar 3, 2004 1:47:56 PM EST> <Info> <WebService> <BEA-220028> <Web
> Service reliable agents are suspended.>
> <Mar 3, 2004 1:47:56 PM EST> <Notice> <JTA> <BEA-110476> <The server has
> detected pending transactions during graceful shutdown. The server will
> wait for the pending transactions to complete before suspending the RMI
> service. A force shutdown command can be issued to shutdown the server
> immediately.>
> <Mar 3, 2004 1:48:26 PM EST> <Info> <Management> <BEA-141080> <A request
> has been received to force shut down of the server.>
> <Mar 3, 2004 1:48:26 PM EST> <Alert> <WebLogicServer> <BEA-000228> <The
> disabling of server logins has been requested by <WLS Kernel>>
> <Mar 3, 2004 1:48:26 PM EST> <Alert> <WebLogicServer> <BEA-000229>
> <Server logins have been disabled.>
> <Mar 3, 2004 1:48:26 PM EST> <Info> <WebService> <BEA-220028> <Web
> Service reliable agents are suspended.>
> <Mar 3, 2004 1:48:26 PM EST> <Info> <EJB> <BEA-010084> <The
> message-driven beans are being suspended. This may take a minute or two.>
> <Mar 3, 2004 1:48:32 PM EST> <Info> <EJB> <BEA-010085> <The
> message-driven beans have all been suspended.>
> <Mar 3, 2004 1:48:32 PM EST> <Info> <EJB> <BEA-010084> <The
> message-driven beans are being suspended. This may take a minute or two.>
> <Mar 3, 2004 1:48:32 PM EST> <Info> <EJB> <BEA-010085> <The
> message-driven beans have all been suspended.>
> [MessageDrivenBeanPoolInfoImpl] : Couldn't unregister MBean
> javax.management.InstanceNotFoundException:
> mydomain:ApplicationRuntime=myserver_otis-dasl-ejb,EJBComponentRuntime=myserver_otis-dasl-ejb_otis-dasl-ejb.jar,Location=myserver,Name=myserver_otis-dasl-ejb_otis-dasl-ejb.jar_com.cibcwm.go.otis.dasl.submission.DASLSubmissionMdb_wls.mqs.dasl.dev.adp.reply3,ServerRuntime=myserver,Type=EJBTransactionRuntime
>
> at
> com.sun.management.jmx.MBeanServerImpl.getMBean(MBeanServerImpl.java:1680)
> at
> com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1524)
> at
> weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
>
> at
> weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
>
> at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:946)
> at
> weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
>
> at
> weblogic.management.runtime.EJBTransactionRuntimeMBean_Stub.preDeregister(EJBTransactionRuntimeMBean_Stub.java:433)
>
> at
> weblogic.management.internal.MBeanHomeImpl.internalDeleteMBean(MBeanHomeImpl.java:996)
>
> at
> weblogic.management.internal.MBeanHomeImpl.privateDeleteMBean(MBeanHomeImpl.java:982)
>
> at
> weblogic.management.internal.MBeanHomeImpl.access$000(MBeanHomeImpl.java:74)
>
> at
> weblogic.management.internal.MBeanHomeImpl$2.run(MBeanHomeImpl.java:948)
> at
> weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
>
> at
> weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
> at
> weblogic.management.internal.MBeanHomeImpl.deleteMBeanWithKernelID(MBeanHomeImpl.java:944)
>
> at
> weblogic.management.internal.MBeanHomeImpl.deleteMBean(MBeanHomeImpl.java:939)
>
> at
> weblogic.management.internal.MBeanHomeImpl.deleteMBean(MBeanHomeImpl.java:933)
>
> at
> weblogic.management.runtime.RuntimeMBeanDelegate.unregister(RuntimeMBeanDelegate.java:140)
>
> at
> weblogic.ejb20.monitoring.EJBRuntimeMBeanImpl.unregisterDependents(EJBRuntimeMBeanImpl.java:58)
>
> at
> weblogic.ejb20.monitoring.MessageDrivenEJBRuntimeMBeanImpl.unregisterDependents(MessageDrivenEJBRuntimeMBeanImpl.java:50)
>
> at
> weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.unInitPool(MessageDrivenBeanPoolInfoImpl.java:208)
>
> at
> weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.onUndeploy(MessageDrivenBeanPoolInfoImpl.java:121)
>
> at
> weblogic.ejb20.deployer.MessageDrivenBeanInfoImpl.onUndeploy(MessageDrivenBeanInfoImpl.java:628)
>
> at weblogic.ejb20.internal.BaseEJBHome.undeploy(BaseEJBHome.java:203)
> at
> weblogic.ejb20.internal.MessageDrivenEJBHome.undeploy(MessageDrivenEJBHome.java:260)
>
> at
> weblogic.ejb20.deployer.EJBDeployer.deactivate(EJBDeployer.java:1802)
> at weblogic.ejb20.deployer.EJBModule.doDeactivate(EJBModule.java:865)
> at weblogic.ejb20.deployer.EJBModule.deactivate(EJBModule.java:712)
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivateModule(J2EEApplicationContainer.java:3161)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivate(J2EEApplicationContainer.java:2186)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivate(J2EEApplicationContainer.java:2131)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.stop(J2EEApplicationContainer.java:1915)
>
> at
> weblogic.j2ee.J2EEApplicationContainerFactory.removeDeployedApplications(J2EEApplicationContainerFactory.java:761)
>
> at
> weblogic.j2ee.J2EEApplicationService.shutdown(J2EEApplicationService.java:115)
>
> at
> weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.shutdownHelper(DeploymentManagerServerLifeCycleImpl.java:257)
>
> at
> weblogic.application.ApplicationService.prepareToSuspend(ApplicationService.java:46)
>
> at
> weblogic.t3.srvr.SubsystemManager.prepareToSuspend(SubsystemManager.java:168)
>
> at weblogic.t3.srvr.T3Srvr.prepareToSuspend(T3Srvr.java:1085)
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread.prepareToSuspend(ServerLifeCycleWorkerThread.java:51)
>
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread$1.run(ServerLifeCycleWorkerThread.java:35)
>
> at
> weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
>
> at
> weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread.run(ServerLifeCycleWorkerThread.java:32)
>
> --------------- nested within: ------------------
> weblogic.management.ManagementException: An error has occurred during
> preDeregister().
> nullmydomain:ApplicationRuntime=myserver_otis-dasl-ejb,EJBComponentRuntime=myserver_otis-dasl-ejb_otis-dasl-ejb.jar,Location=myserver,Name=myserver_otis-dasl-ejb_otis-dasl-ejb.jar_com.cibcwm.go.otis.dasl.submission.DASLSubmissionMdb_wls.mqs.dasl.dev.adp.reply3,ServerRuntime=myserver,Type=EJBTransactionRuntime
> - with nested exception:
> [javax.management.InstanceNotFoundException:
> mydomain:ApplicationRuntime=myserver_otis-dasl-ejb,EJBComponentRuntime=myserver_otis-dasl-ejb_otis-dasl-ejb.jar,Location=myserver,Name=myserver_otis-dasl-ejb_otis-dasl-ejb.jar_com.cibcwm.go.otis.dasl.submission.DASLSubmissionMdb_wls.mqs.dasl.dev.adp.reply3,ServerRuntime=myserver,Type=EJBTransactionRuntime]
>
> at
> weblogic.management.runtime.RuntimeMBeanDelegate.unregister(RuntimeMBeanDelegate.java:148)
>
> at
> weblogic.ejb20.monitoring.EJBRuntimeMBeanImpl.unregisterDependents(EJBRuntimeMBeanImpl.java:58)
>
> at
> weblogic.ejb20.monitoring.MessageDrivenEJBRuntimeMBeanImpl.unregisterDependents(MessageDrivenEJBRuntimeMBeanImpl.java:50)
>
> at
> weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.unInitPool(MessageDrivenBeanPoolInfoImpl.java:208)
>
> at
> weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.onUndeploy(MessageDrivenBeanPoolInfoImpl.java:121)
>
> at
> weblogic.ejb20.deployer.MessageDrivenBeanInfoImpl.onUndeploy(MessageDrivenBeanInfoImpl.java:628)
>
> at weblogic.ejb20.internal.BaseEJBHome.undeploy(BaseEJBHome.java:203)
> at
> weblogic.ejb20.internal.MessageDrivenEJBHome.undeploy(MessageDrivenEJBHome.java:260)
>
> at
> weblogic.ejb20.deployer.EJBDeployer.deactivate(EJBDeployer.java:1802)
> at weblogic.ejb20.deployer.EJBModule.doDeactivate(EJBModule.java:865)
> at weblogic.ejb20.deployer.EJBModule.deactivate(EJBModule.java:712)
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivateModule(J2EEApplicationContainer.java:3161)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivate(J2EEApplicationContainer.java:2186)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivate(J2EEApplicationContainer.java:2131)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.stop(J2EEApplicationContainer.java:1915)
>
> at
> weblogic.j2ee.J2EEApplicationContainerFactory.removeDeployedApplications(J2EEApplicationContainerFactory.java:761)
>
> at
> weblogic.j2ee.J2EEApplicationService.shutdown(J2EEApplicationService.java:115)
>
> at
> weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.shutdownHelper(DeploymentManagerServerLifeCycleImpl.java:257)
>
> at
> weblogic.application.ApplicationService.prepareToSuspend(ApplicationService.java:46)
>
> at
> weblogic.t3.srvr.SubsystemManager.prepareToSuspend(SubsystemManager.java:168)
>
> at weblogic.t3.srvr.T3Srvr.prepareToSuspend(T3Srvr.java:1085)
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread.prepareToSuspend(ServerLifeCycleWorkerThread.java:51)
>
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread$1.run(ServerLifeCycleWorkerThread.java:35)
>
> at
> weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
>
> at
> weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread.run(ServerLifeCycleWorkerThread.java:32)
>
> <Mar 3, 2004 1:48:33 PM EST> <Info> <Management> <BEA-141082>
> <ServerRuntime:java.util.ConcurrentModificationException>
> <Mar 3, 2004 1:48:33 PM EST> <Info> <Management> <BEA-141082>
> <ServerRuntime:java.util.ConcurrentModificationException
> at
> java.util.LinkedList$ListItr.checkForComodification(LinkedList.java:552)
> at java.util.LinkedList$ListItr.next(LinkedList.java:488)
> at
> weblogic.ejb20.deployer.EJBDeployer.deactivate(EJBDeployer.java:1801)
> at weblogic.ejb20.deployer.EJBModule.doDeactivate(EJBModule.java:865)
> at weblogic.ejb20.deployer.EJBModule.deactivate(EJBModule.java:712)
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivateModule(J2EEApplicationContainer.java:3161)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivate(J2EEApplicationContainer.java:2186)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.deactivate(J2EEApplicationContainer.java:2131)
>
> at
> weblogic.j2ee.J2EEApplicationContainer.stop(J2EEApplicationContainer.java:1915)
>
> at
> weblogic.j2ee.J2EEApplicationContainerFactory.removeDeployedApplications(J2EEApplicationContainerFactory.java:761)
>
> at
> weblogic.j2ee.J2EEApplicationService.shutdown(J2EEApplicationService.java:115)
>
> at
> weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.shutdownHelper(DeploymentManagerServerLifeCycleImpl.java:257)
>
> at
> weblogic.application.ApplicationService.prepareToSuspend(ApplicationService.java:46)
>
> at
> weblogic.t3.srvr.SubsystemManager.prepareToSuspend(SubsystemManager.java:168)
>
> at weblogic.t3.srvr.T3Srvr.prepareToSuspend(T3Srvr.java:1085)
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread.prepareToSuspend(ServerLifeCycleWorkerThread.java:51)
>
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread$1.run(ServerLifeCycleWorkerThread.java:35)
>
> at
> weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
>
> at
> weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
> at
> weblogic.t3.srvr.ServerLifeCycleWorkerThread.run(ServerLifeCycleWorkerThread.java:32)
>
> >
> <Mar 3, 2004 1:48:35 PM EST> <Critical> <WebLogicServer> <BEA-000217>
> <Failed to fully suspend the server due to:
> java.util.ConcurrentModificationException
> java.util.ConcurrentModificationException
> at java.util.HashMap$HashIterator.nextEntry(HashMap.java:782)
> at java.util.HashMap$KeyIterator.next(HashMap.java:818)
> at
> weblogic.j2ee.J2EEApplicationContainerFactory.removeDeployedApplications(J2EEApplicationContainerFactory.java:751)
>
> at
> weblogic.j2ee.J2EEApplicationService.shutdown(J2EEApplicationService.java:115)
>
> at
> weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.shutdownHelper(DeploymentManagerServerLifeCycleImpl.java:257)
>
> at
> weblogic.application.ApplicationService.forceSuspend(ApplicationService.java:82)
>
> at
> weblogic.t3.srvr.SubsystemManager.forceSuspend(SubsystemManager.java:184)
> at weblogic.t3.srvr.T3Srvr.forceSuspend(T3Srvr.java:1097)
> at
> weblogic.t3.srvr.ServerRuntime.uprotectedForceShutdown(ServerRuntime.java:629)
>
> at weblogic.t3.srvr.ServerRuntime.access$300(ServerRuntime.java:83)
> at weblogic.t3.srvr.ServerRuntime$4.run(ServerRuntime.java:563)
> at
> weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
>
> at
> weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
> at weblogic.t3.srvr.ServerRuntime.forceShutdown(ServerRuntime.java:559)
> at weblogic.t3.srvr.ServerRuntime.shutdown(ServerRuntime.java:547)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>
> at java.lang.reflect.Method.invoke(Method.java:324)
> at
> weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
>
> at
> weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
>
> at
> com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
> at
> com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
> at
> weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
>
> at
> weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
>
> at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:946)
> at
> weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
>
> at
> weblogic.management.runtime.ServerRuntimeMBean_Stub.shutdown(ServerRuntimeMBean_Stub.java:1184)
>
> at
> weblogic.server.ServerLifeCycleRuntime$ShutdownRequest.execute(ServerLifeCycleRuntime.java:585)
>
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
> >
> <Mar 3, 2004 1:48:35 PM EST> <Debug> <Management> <BEA-141132> <Dynamic
> invocation while executing action shutdown on
> mydomain:Location=myserver,Name=myserver,Type=ServerRuntime MBean
> instance failed. The method shutdown with signature [int, boolean] was
> invoked with parameters as [30, true].
> java.util.ConcurrentModificationException
> at java.util.HashMap$HashIterator.nextEntry(HashMap.java:782)
> at java.util.HashMap$KeyIterator.next(HashMap.java:818)
> at
> weblogic.j2ee.J2EEApplicationContainerFactory.removeDeployedApplications(J2EEApplicationContainerFactory.java:751)
>
> at
> weblogic.j2ee.J2EEApplicationService.shutdown(J2EEApplicationService.java:115)
>
> at
> weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.shutdownHelper(DeploymentManagerServerLifeCycleImpl.java:257)
>
> at
> weblogic.application.ApplicationService.forceSuspend(ApplicationService.java:82)
>
> at
> weblogic.t3.srvr.SubsystemManager.forceSuspend(SubsystemManager.java:184)
> at weblogic.t3.srvr.T3Srvr.forceSuspend(T3Srvr.java:1097)
> at
> weblogic.t3.srvr.ServerRuntime.uprotectedForceShutdown(ServerRuntime.java:629)
>
> at weblogic.t3.srvr.ServerRuntime.access$300(ServerRuntime.java:83)
> at weblogic.t3.srvr.ServerRuntime$4.run(ServerRuntime.java:563)
> at
> weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
>
> at
> weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
> at weblogic.t3.srvr.ServerRuntime.forceShutdown(ServerRuntime.java:559)
> at weblogic.t3.srvr.ServerRuntime.shutdown(ServerRuntime.java:547)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>
> at java.lang.reflect.Method.invoke(Method.java:324)
> at
> weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
>
> at
> weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
>
> at
> com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
> at
> com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
> at
> weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
>
> at
> weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
>
> at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:946)
> at
> weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
>
> at
> weblogic.management.runtime.ServerRuntimeMBean_Stub.shutdown(ServerRuntimeMBean_Stub.java:1184)
>
> at
> weblogic.server.ServerLifeCycleRuntime$ShutdownRequest.execute(ServerLifeCycleRuntime.java:585)
>
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
> >
>
> Tom Barnes wrote:
>
>> Hi Dmitri,
>>
>> This is normal behavior.
>> The internal rollbacks are a side effect of WL MDBs
>> necessarily starting a transaction before they (internally)
>> post a synchronous
>> receive on the remote foreign JMS server. If the synchronous receive
>> receives nothing, the tx is rolled back, and another
>> synch receive is posted with a new tx. (When interacting with
>> foreign vendors, tx MDBs usually must post synchronous receives
>> in order to infect the received message - there is no
>> standard JMS API for infecting asynchronously received messages
>> with a user transaction.)
>>
>> Tom
>>
>> Dmitri Maximovich wrote:
>>
>>> Hi everybody,
>>>
>>> Is anybody successfully using remote IBM MQseries 5.3 server as
>>> Foreign JMS in WLS 8.1sp2?
>>> We're observing some strange behavior in this case. Here is our setup:
>>>
>>> WLS and IBM MQ server deployed on separate boxes.
>>> WLS version 8.1sp2 running on Windows 2000/Intel
>>> IBM MQ version 5.3 running on Solaris/SPARC
>>>
>>> We're using "WebSphere MQ classes for Java, version 5.303 -
>>> j5303-L030225"
>>> and "WebSphere MQ Extended Transactional Client Feature, version
>>> 5.300 - j5303-L030122"
>>>
>>> MQ files added in WLS POST_CLASSPATH variable in WLS starup script.
>>>
>>> Foreign JMS server configured in WLS via fscontext JNDI.
>>>
>>> MDB bean deployed with Transaction attribute "Required".
>>>
>>> Everything seems to work fine, if we're posting message to MQ queue
>>> MDB receives it and process successfully (just print message content
>>> to the console for now).
>>>
>>> Problem: In WLS console, under Server->Monitoring->JTA->Monitor
>>> inflight transactions we can constantly see one transaction enlisted
>>> for our MDB bean with following details:
>>>
>>> =====================================================
>>> Transaction ID: BEA1-00DFC5EB4B7B7F28EDB9
>>> Coordinator: mydomain+myserver
>>> Name: JMSMessagePoller.xxx.xxx.MyMessageProcessorMdb
>>> Status: Active
>>> Seconds Active: 17
>>> Resources:
>>> weblogic.ejb20.JMSConnectionPoller.xxx.xxx.MyMessageProcessorMdb=started
>>> Properties
>>> (key=value):
>>> weblogic.transaction.name=JMSMessagePoller.xxx.xxx.MyMessageProcessorMdb
>>> =====================================================
>>>
>>> This transaction seems to be Active for 30 seconds and then rolled
>>> back (no error messages on WLS console displayed).On JTA statistics
>>> page in WLS console "Total Rolled Back" counter keeps increneting
>>> with every rollback.
>>>
>>> Does anybody observerd similar problem? May be it's normal behaviour
>>> but I'm kind of worrying about those transactions and constant
>>> rollback. I'd appreciate any feedback.
>>>
>>> ---
>>> Sincerely,
>>> Dmitri Maximovich
>>
>>
>>
-
Failure to wake up from disk suspended hybernation
Hello everybody,
when running my MacBook Pro (8,2) is so low on battery that it suspends to disk before poweroutage, it fails to wake up correctly. What happens is this:
Battery running low, suspension to disk runs, MacBook Pro is sleeping. Battery indicator on the left side links when pressed.
After attaching power cord, MacBook Pro wakes up fine, asks for my password (FileVault2 is running).
Then the bar on the bottom of the screen shows up, indicating that it reads the hybernation suspension file.
This progress always goes to the last but one part of the bar. Then it stops and the chime is heard that I only know from my Mac if it can not start up because of a hardware test failure (like wrong RAM installed).
Then I have to force it to turn off by pressing the power button 5 seconds.
After that, it starts normally, and all apps that have been running before the battery when out, are restored.
pmset -g just after such an incident (with power cord attached) will give these informations:
Active Profiles:
Battery Power -1
AC Power -1*
Currently in use:
standbydelay 4200
standby 0
womp 1
halfdim 1
hibernatefile /var/vm/sleepimage
gpuswitch 2
sms 1
networkoversleep 0
disksleep 10
sleep 0
hibernatemode 7
ttyskeepawake 1
displaysleep 30
acwake 0
lidwake 1
Any suggestion on how to fix this is much appreciated.
Regards
Jim Knopf
Message was edited by Jim Knopf: reformated terminal outputIt's an external one. USB. I started thinking maybe if I disable usb from suspending it might actually work. How do I disable usb from suspending? Or any other ideas?
Cheers!
Last edited by crid (2011-10-07 12:12:39) -
Closing lid to suspend and then resuming causes capslock and shift key failures
When I close the lid of my NB205, the computer enters hibernate. When I open the lid and press the power key to resume, the computer starts back up but the caps lock key light is on. The keyboard responds the same as if the caps lock were on and the shift key were depressed at the same time. Typing any letter results in a lower case. Typing on the upper row of numbers produces the symbols (same as when shift key is depressed). Also, my bluetooth mouse is not functional but the cursor can be moved using the keypad.
By pressing the caps lock key a couple of times I can get the caps lock key light to go off. Then the keyboard still functions like the shift key is depressed - producing capital letters plus symbols for the upper row. I have to press the shift key a couple of times to fix that and then press Fn+F8 to restore bluetooth to get the computer to work correctly. I tried changing the lid suspend action to Standby in lieu of Hibernate but the result was the same. I do not have these problems when resuming from hibernate or standby if I enter them using the start/shutdown commands.
The computer worked fine for the first two months before this began. I have tried scanning with McAfee virus scanner and have restored the system to a restore point well before the problems began but nothing helps. Does anyone have any ideas I can try before I return this under the warranty?VPN-User,
Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.
Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those. This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
Thanks for your patience
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Failure to properly resume after hibernation (suspend to swapfile)
I have an 8GB swapfile set up as recommended on the ArchWiki, but from time to time I encounter an error while resuming and am unable to interact with the interface that resumes (i.e.: Chrome, GNOME-Shell, etc.), and the time displayed is the time of hibernating.
[evergreen_resume] *ERROR* evergreen startup failed on resume
Arch x86_64, kernel 3.17.3-1, using open-source Radeon drivers with an HD 6750.
Last edited by rainbowdashc (2014-11-20 14:46:34)we downgraded the kernel to 3.17.2-1 that solved the problem
-
Suspend MDT, Sysprep for disk cloning, and resume with new hardware failure.
I am able to successfully Sysprep for disk cloning after pausing the Deployment (via LTISuspend). The problem is when I attempt to resume the Deployment after duplicating the hard drive and placing in new hardware it fails immediately stating that it cannot
open the TSENV.DAT (80090005). It works fine if you resume in the identical hardware it was built in.
The hardware is identical for all computers receiving the cloned drive with the Mac Address, Serial Number, and UUID being different.
Knowing that the TSENV.DAT is encrypted, is there a way to prep it for minor hardware (mac address, uuid, and serial number only) change prior to pausing and sysprep so it does not fail?
Using MDT 2012 and Windows 7 OS.
ThanksLet me add to what Mr. Owen described.
We have a complex MDT. It has been used for years for a globally scaled corporate desktop.
What we are looking to do to is sysprep this machine 3/4 of the way through the process, clone the drive, and then use the cloned drive on like hardware models (we used PersistDrivers in the Unattend).
I initially ran sysprep outside of the MDT. It ran successfully, however when we moved the syspreped (and cloned) drive to another hardware of identical type we got the error Mr Owen mentioned. What we hoped would happen if we called Sysprep from
the MDT directly is the TSENV would be cleaned/updated to remove any workstations specific identifiers and thus eliminate the error. -
[Lenovo IdeaPad S10-3t] Waking up from suspend not working properly
Hi,
I'm having some issues with getting suspend to work on my S10-3t. I tried pm-utils and the s2ram script (with about any combination of options as my machine is not on the whitelist) and always get the same behaviour: Suspending seems to succeed but waking up takes about 5 minutes.
I tried using pm-suspend under ubuntu 10.10, works flawlessly out of the box, so it *can* be done.. somehow.
Apparently this was a kernel related issue in older versions of ubuntu too, I couldn't quite figure out how they fixed it though (https://bugs.launchpad.net/ubuntu/+sour … bug/598664).
I tailed the pm-suspend.log and kernel.log through one suspend/wake up cycle, here's the output:
pm-suspend.log:
bash-4.1$ date;sudo tail -f /var/log/pm-suspend.log
Sun Oct 24 20:27:47 CEST 2010
Password:
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Sun Oct 24 20:25:36 CEST 2010: Finished.
tail: /var/log/pm-suspend.log: file truncated
Initial commandline parameters:
Sun Oct 24 20:29:08 CEST 2010: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux netarch.haselwarter.org 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010 i686 Intel(R) Atom(TM) CPU N470 @ 1.83GHz GenuineIntel GNU/Linux
Module Size Used by
cpufreq_ondemand 6971 2
btusb 9745 0
hid_cando 2611 0
bluetooth 44753 1 btusb
rfkill 12854 1 bluetooth
usbhid 33564 0
hid 60400 2 hid_cando,usbhid
uvcvideo 53488 0
videodev 39124 1 uvcvideo
v4l1_compat 13562 2 uvcvideo,videodev
joydev 7503 0
snd_seq_dummy 1079 0
snd_seq_oss 25072 0
snd_seq_midi_event 4496 1 snd_seq_oss
snd_seq 41752 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4369 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec_conexant 26292 1
snd_pcm_oss 33662 0
i915 267072 2
snd_mixer_oss 14686 1 snd_pcm_oss
snd_hda_intel 19020 0
snd_hda_codec 67274 2 snd_hda_codec_conexant,snd_hda_intel
drm_kms_helper 22043 1 i915
drm 134132 3 i915,drm_kms_helper
snd_hwdep 4764 1 snd_hda_codec
snd_pcm 58308 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
lib80211_crypt_tkip 7521 0
uhci_hcd 19251 0
snd_timer 15423 2 snd_seq,snd_pcm
broadcom 5201 0
i2c_algo_bit 4407 1 i915
ehci_hcd 32860 0
snd 43283 11 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_codec_conexant,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5025 1 snd
video 15889 1 i915
wl 1943997 0
tg3 115656 0
usbcore 121737 6 btusb,usbhid,uvcvideo,uhci_hcd,ehci_hcd
output 1448 1 video
snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
intel_agp 24510 2 i915
wmi 5962 0
battery 7879 0
i2c_i801 7426 0
ac 2329 0
i2c_core 15599 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
psmouse 51529 0
evdev 6820 9
libphy 14543 2 broadcom,tg3
lib80211 3158 2 lib80211_crypt_tkip,wl
agpgart 23520 2 drm,intel_agp
sg 20932 0
thermal 9786 0
coretemp 4665 0
button 3746 1 i915
serio_raw 3566 0
acpi_cpufreq 5157 1
freq_table 1999 2 cpufreq_ondemand,acpi_cpufreq
processor 25126 3 acpi_cpufreq
mperf 979 1 acpi_cpufreq
rtc_cmos 7746 0
rtc_core 11831 1 rtc_cmos
rtc_lib 1494 1 rtc_core
ext4 282610 1
mbcache 4290 1 ext4
jbd2 58396 1 ext4
crc16 1053 1 ext4
sd_mod 26768 3
ahci 17813 0
libahci 16174 3 ahci
libata 140771 2 ahci,libahci
scsi_mod 105888 3 sg,sd_mod,libata
total used free shared buffers cached
Mem: 2053592 233156 1820436 0 24724 102332
-/+ buffers/cache: 106100 1947492
Swap: 1952764 0 1952764
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend:
/usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Done.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
Unable to connect to wicd daemon - is it running?
/usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sun Oct 24 20:29:10 CEST 2010: performing suspend
Switching from vt7 to vt1
fbcon fb0 state 1
fbcon fb0 state 0
switching back to vt7
Sun Oct 24 20:34:40 CEST 2010: Awake.
Sun Oct 24 20:34:40 CEST 2010: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/91wicd resume suspend:
Unable to connect to wicd daemon - is it running?
/usr/lib/pm-utils/sleep.d/91wicd resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Done.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend:
tail: /var/log/pm-suspend.log: file truncated
Laptop mode
tail: /var/log/pm-suspend.log: file truncated
enabled, not active
Error for wireless request "Set Power Management" (8B2C) :
SET failed on device eth0 ; Operation not supported.
tail: /var/log/pm-suspend.log: file truncated
Failed.
/usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Sun Oct 24 20:34:44 CEST 2010: Finished.
kernel.log:
bash-4.1$ sudo tail -f /var/log/kernel.log
Password:
Oct 24 20:27:15 netarch kernel: input: Cando Corporation Cando 10.1 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
Oct 24 20:27:15 netarch kernel: cando-touch 0003:2087:0A01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 10.1 Multi Touch Panel with Controller] on usb-0000:00:1d.1-1/input0
Oct 24 20:27:15 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
Oct 24 20:27:15 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
Oct 24 20:27:15 netarch kernel: Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
Oct 24 20:27:16 netarch kernel: tg3 0000:05:00.0: irq 45 for MSI/MSI-X
Oct 24 20:27:16 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
Oct 24 20:27:17 netarch kernel: CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
Oct 24 20:27:18 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
Oct 24 20:27:19 netarch kernel: WARNING! power/level is deprecated; use power/control instead
Oct 24 20:29:08 netarch kernel: CE: hpet increased min_delta_ns to 7500 nsec
Oct 24 20:29:08 netarch kernel: ata1.00: configured for UDMA/100
Oct 24 20:29:08 netarch kernel: ata1: EH complete
Oct 24 20:29:08 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Oct 24 20:34:40 netarch kernel: PM: Syncing filesystems ... done.
Oct 24 20:34:40 netarch kernel: PM: Preparing system for mem sleep
Oct 24 20:34:40 netarch kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Oct 24 20:34:40 netarch kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Oct 24 20:34:40 netarch kernel: PM: Entering mem sleep
Oct 24 20:34:40 netarch kernel: Suspending console(s) (use no_console_suspend to debug)
Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Stopping disk
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: PCI INT A disabled
Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: PME# enabled
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
Oct 24 20:34:40 netarch kernel: ACPI handle has no context!
Oct 24 20:34:40 netarch kernel: PM: suspend of devices complete after 429.517 msecs
Oct 24 20:34:40 netarch kernel: PM: late suspend of devices complete after 13.649 msecs
Oct 24 20:34:40 netarch kernel: ACPI: Preparing to enter system sleep state S3
Oct 24 20:34:40 netarch kernel: PM: Saving platform NVS memory
Oct 24 20:34:40 netarch kernel: Disabling non-boot CPUs ...
Oct 24 20:34:40 netarch kernel: CPU 1 is now offline
Oct 24 20:34:40 netarch kernel: SMP alternatives: switching to UP code
Oct 24 20:34:40 netarch kernel: Extended CMOS year: 2000
Oct 24 20:34:40 netarch kernel: Back to C!
Oct 24 20:34:40 netarch kernel: PM: Restoring platform NVS memory
Oct 24 20:34:40 netarch kernel: CPU0: Thermal monitoring handled by SMI
Oct 24 20:34:40 netarch kernel: Extended CMOS year: 2000
Oct 24 20:34:40 netarch kernel: Enabling non-boot CPUs ...
Oct 24 20:34:40 netarch kernel: SMP alternatives: switching to SMP code
Oct 24 20:34:40 netarch kernel: Booting Node 0 Processor 1 APIC 0x1
Oct 24 20:34:40 netarch kernel: Initializing CPU#1
Oct 24 20:34:40 netarch kernel: CPU1 is up
Oct 24 20:34:40 netarch kernel: ACPI: Waking up from system sleep state S3
Oct 24 20:34:40 netarch kernel: ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100428/evregion-474)
Oct 24 20:34:40 netarch kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSLD] (Node f7025600), AE_TIME
Oct 24 20:34:40 netarch kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7024768), AE_TIME
Oct 24 20:34:40 netarch kernel: ACPI Exception: AE_TIME, During Method _WAK (20100428/hwsleep-601)
Oct 24 20:34:40 netarch kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100506)
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
Oct 24 20:34:40 netarch kernel: PM: early resume of devices complete after 2.675 msecs
Oct 24 20:34:40 netarch kernel: i915 0000:00:02.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: usb usb2: root hub lost power or was reset
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: usb usb3: root hub lost power or was reset
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: usb usb4: root hub lost power or was reset
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: usb usb5: root hub lost power or was reset
Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: PME# disabled
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Starting disk
Oct 24 20:34:40 netarch kernel: ata2: SATA link down (SStatus 0 SControl 300)
Oct 24 20:34:40 netarch kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 24 20:34:40 netarch kernel: usb 3-2: reset full speed USB device using uhci_hcd and address 3
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: btusb 3-2:1.0: no reset_resume for driver btusb?
Oct 24 20:34:40 netarch kernel: btusb 3-2:1.1: no reset_resume for driver btusb?
Oct 24 20:34:40 netarch kernel: usb 1-8: reset high speed USB device using ehci_hcd and address 4
Oct 24 20:34:40 netarch kernel: ata1.00: configured for UDMA/100
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: PM: resume of devices complete after 996.313 msecs
Oct 24 20:34:40 netarch kernel: PM: Finishing wakeup.
Oct 24 20:34:40 netarch kernel: Restarting tasks ...
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: done.
Oct 24 20:34:40 netarch kernel: video LNXVIDEO:00: Restoring backlight state
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
Oct 24 20:34:41 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
Oct 24 20:34:43 netarch kernel: ata1.00: configured for UDMA/100
Oct 24 20:34:43 netarch kernel: ata1: EH complete
Oct 24 20:34:44 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f5d0000 (usable)
BIOS-e820: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
BIOS-e820: 000000007f5e3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.5 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7f5d0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 080000000 write-back
1 base 07F600000 mask 0FFE00000 uncachable
2 base 07F800000 mask 0FF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009dc00 (usable)
modified: 000000000009dc00 - 00000000000a0000 (reserved)
modified: 00000000000d2000 - 00000000000d4000 (reserved)
modified: 00000000000dc000 - 00000000000e0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007f5d0000 (usable)
modified: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
modified: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
modified: 000000007f5e3000 - 0000000080000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f7cb0] f7cb0
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 37e2a000 - 37ff0000
Allocated new RAMDISK: 00100000 - 002c5f93
Move RAMDISK from 0000000037e2a000 - 0000000037feff92 to 00100000 - 002c5f92
ACPI: RSDP 000f7c80 00024 (v04 PTLTD )
ACPI: XSDT 7f5d72d4 00074 (v01 LENOVO CB-01 06040000 LTP 00000000)
ACPI: FACP 7f5dfc60 000F4 (v03 LENOVO CB-01 06040000 PTL 00000002)
ACPI: DSDT 7f5d846a 07782 (v01 LENOVO CB-01 06040000 MSFT 03000000)
ACPI: FACS 7f5e2fc0 00040
ACPI: TCPA 7f5dfd54 00032 (v01 Phoeni x 06040000 TL 00000000)
ACPI: MCFG 7f5dfd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 7f5dfdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 7f5dfdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 7f5dfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 7f5dfe8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
ACPI: SSDT 7f5d78ca 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 7f5d7824 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 7f5d7348 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1149MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f5d0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0007f5d0
On node 0 totalpages: 521566
free_area_init_node: node 0, pgdat c1418ac0, node_mem_map c157b020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2300 pages used for memmap
HighMem zone: 292054 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34880 r0 d22464 u2097152
pcpu-alloc: s34880 r0 d22464 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517490
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda5
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 10433580 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (53 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 0001572184] TEXT DATA BSS
#3 [0001573000 - 000157921c] BRK
#4 [00000f7cc0 - 0000100000] BIOS reserved
#5 [00000f7cb0 - 00000f7cc0] MP-table mpf
#6 [000009dc00 - 000009e071] BIOS reserved
#7 [000009e199 - 00000f7cb0] BIOS reserved
#8 [000009e071 - 000009e199] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000100000 - 00002c6000] NEW RAMDISK
#13 [000157a000 - 000157b000] BOOTMEM
#14 [000157b000 - 000256b000] BOOTMEM
#15 [00015721c0 - 00015721c4] BOOTMEM
#16 [0001572200 - 00015722c0] BOOTMEM
#17 [00015722c0 - 0001572314] BOOTMEM
#18 [000256b000 - 000256e000] BOOTMEM
#19 [0001572340 - 00015723ac] BOOTMEM
#20 [000256e000 - 0002574000] BOOTMEM
#21 [00015723c0 - 00015723e5] BOOTMEM
#22 [0001572400 - 0001572427] BOOTMEM
#23 [0001572440 - 0001572600] BOOTMEM
#24 [0001572600 - 0001572640] BOOTMEM
#25 [0001572640 - 0001572680] BOOTMEM
#26 [0001572680 - 00015726c0] BOOTMEM
#27 [00015726c0 - 0001572700] BOOTMEM
#28 [0001572700 - 0001572740] BOOTMEM
#29 [0001572740 - 0001572780] BOOTMEM
#30 [0001572780 - 00015727c0] BOOTMEM
#31 [00015727c0 - 0001572800] BOOTMEM
#32 [0001572800 - 0001572840] BOOTMEM
#33 [0001572840 - 0001572880] BOOTMEM
#34 [0001572880 - 00015728c0] BOOTMEM
#35 [00015728c0 - 0001572900] BOOTMEM
#36 [0001572900 - 0001572940] BOOTMEM
#37 [0001572940 - 0001572950] BOOTMEM
#38 [0001572980 - 0001572990] BOOTMEM
#39 [00015729c0 - 00015729ea] BOOTMEM
#40 [0001572a00 - 0001572a2a] BOOTMEM
#41 [0002800000 - 000280e000] BOOTMEM
#42 [0002a00000 - 0002a0e000] BOOTMEM
#43 [0001572a40 - 0001572a44] BOOTMEM
#44 [0001572a80 - 0001572a84] BOOTMEM
#45 [0001572ac0 - 0001572ac8] BOOTMEM
#46 [0001572b00 - 0001572b08] BOOTMEM
#47 [0001572b40 - 0001572be8] BOOTMEM
#48 [0001572c00 - 0001572c68] BOOTMEM
#49 [0002574000 - 0002578000] BOOTMEM
#50 [0002578000 - 00025f8000] BOOTMEM
#51 [00025f8000 - 0002638000] BOOTMEM
#52 [0002a0e000 - 000340142c] BOOTMEM
Initializing HighMem for node 0 (000377fe:0007f5d0)
Memory: 2051364k/2086720k available (2986k kernel code, 34900k reserved, 1238k data, 412k init, 1177416k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1421000 - 0xc1488000 ( 412 kB)
.data : 0xc12eaacc - 0xc1420340 (1238 kB)
.text : 0xc1000000 - 0xc12eaacc (2986 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1828.625 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3658.63 BogoMIPS (lpj=6095416)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100428
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N470 @ 1.83GHz stepping 0a
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (7317.54 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 7f5d8193 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 7f5d7b29 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 7f5d8396 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 7f5d810e 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f390), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xf7ffffff]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
pci 0000:00:02.0: reg 14: [io 0x18e8-0x18ef]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff]
pci 0000:00:1b.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf0604000-0xf06043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x18e0-0x18e7]
pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
pci 0000:00:1f.2: reg 24: [mem 0xf0604400-0xf06047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
pci 0000:05:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xf0200000-0xf0203fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 07-07]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f390), AE_ALREADY_EXISTS
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000007f5d0000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0xfe00] has been reserved
system 00:01: [io 0x0700-0x070f] has been reserved
system 00:01: [io 0x164e-0x174c] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 07-07]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 11-11]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0000 -> 0003)
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 9 [mem 0x80000000-0xf7ffffff]
pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:05: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:07: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:11: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:11: resource 9 [mem 0x80000000-0xf7ffffff]
pci_bus 0000:11: resource 10 [io 0x0d00-0xfdff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1816k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1287944823.419:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1710
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 412k freed
udev[38]: starting version 162
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
SCSI subsystem initialized
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
ata3: DUMMY
ata4: DUMMY
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST9250315AS, 0010LVM1, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0010 PQ: 0 ANSI: 5
ata2: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Marking nosave pages: 0000000000002000 - 0000000000010000
PM: Marking nosave pages: 000000000009d000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev[734]: starting version 162
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
coretemp coretemp.0: Unable to read TjMax from CPU.
coretemp coretemp.0: Using relative temperature scale!
ACPI: Lid Switch [LID]
------------[ cut here ]------------
WARNING: at fs/proc/generic.c:583 proc_register+0xf8/0x1e0()
Hardware name: 20040M18
proc_dir_entry 'power/PWRB' already registered
Modules linked in: coretemp button(+) serio_raw acpi_cpufreq freq_table processor mperf rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sd_mod ahci libahci libata scsi_mod
Pid: 1097, comm: modprobe Not tainted 2.6.35-ARCH #1
Call Trace:
[<c10439bd>] warn_slowpath_common+0x6d/0xa0
[<c113e648>] ? proc_register+0xf8/0x1e0
[<c113e648>] ? proc_register+0xf8/0x1e0
[<c1043a6e>] warn_slowpath_fmt+0x2e/0x30
[<c113e648>] proc_register+0xf8/0x1e0
[<c113eca3>] proc_mkdir_mode+0x33/0x50
[<c113eccf>] proc_mkdir+0xf/0x20
[<f82af453>] acpi_button_add+0x21b/0x387 [button]
[<c11cc665>] acpi_device_probe+0x3a/0xf4
[<c121eae7>] driver_probe_device+0x77/0x180
[<c121ec69>] __driver_attach+0x79/0x80
[<c121dcb3>] bus_for_each_dev+0x43/0x70
[<c121e839>] driver_attach+0x19/0x20
[<c121ebf0>] ? __driver_attach+0x0/0x80
[<c121e3ed>] bus_add_driver+0xbd/0x2e0
[<c11cc59b>] ? acpi_device_remove+0x0/0x90
[<c121ee65>] driver_register+0x65/0x110
[<c113eca3>] ? proc_mkdir_mode+0x33/0x50
[<c11ccd53>] acpi_bus_register_driver+0x3a/0x3c
[<f82b202b>] acpi_button_init+0x2b/0x4a [button]
[<c100120d>] do_one_initcall+0x2d/0x190
[<f82b2000>] ? acpi_button_init+0x0/0x4a [button]
[<c107892b>] sys_init_module+0x9b/0x1e0
[<c10f4f8f>] ? sys_close+0x6f/0xc0
[<c100379f>] sysenter_do_call+0x12/0x28
---[ end trace 475801f928d07a3d ]---
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input3
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (60 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Linux agpgart interface v0.103
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: AC Adapter [ACAD] (on-line)
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: WMI: Mapper loaded
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
agpgart-intel 0000:00:00.0: detected 8188K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
tg3.c:v3.110 (April 9, 2010)
tg3 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:05:00.0: setting latency timer to 64
wl 0000:07:00.0: enabling device (0104 -> 0106)
wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:07:00.0: setting latency timer to 64
ACPI: Battery Slot [BAT1] (battery present)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
tg3 mdio bus: probed
tg3 0000:05:00.0: eth1: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address c8:0a:a9:3b:be:4d
tg3 0000:05:00.0: eth1: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=500:01)
tg3 0000:05:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
lib80211_crypt: registered algorithm 'TKIP'
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36
udev[757]: renamed network interface eth1 to eth1-eth0
udev[756]: renamed network interface eth0 to wlan0
udev[757]: renamed network interface eth1-eth0 to eth0
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 1-8: new high speed USB device using ehci_hcd and address 4
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] set up 7M of stolen space
Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x4a0500
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
usb 3-1: new full speed USB device using uhci_hcd and address 2
[drm] initialized overlay support
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b1a1)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usb 3-2: new full speed USB device using uhci_hcd and address 3
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Console: switching to colour frame buffer device 128x37
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
ACPI Warning: _BQC returned an invalid level (20100428/video-640)
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
input: Cando Corporation Cando 10.1 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
cando-touch 0003:2087:0A01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 10.1 Multi Touch Panel with Controller] on usb-0000:00:1d.1-1/input0
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
tg3 0000:05:00.0: irq 45 for MSI/MSI-X
tg3 0000:05:00.0: eth0: Link is down
CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
tg3 0000:05:00.0: eth0: Link is down
WARNING! power/level is deprecated; use power/control instead
CE: hpet increased min_delta_ns to 7500 nsec
ata1.00: configured for UDMA/100
ata1: EH complete
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
wl 0000:07:00.0: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PCI INT A disabled
uhci_hcd 0000:00:1d.3: PCI INT D disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
tg3 0000:05:00.0: PME# enabled
pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
HDA Intel 0000:00:1b.0: PCI INT A disabled
ACPI handle has no context!
PM: suspend of devices complete after 429.517 msecs
PM: late suspend of devices complete after 13.649 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
Back to C!
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
CPU1 is up
ACPI: Waking up from system sleep state S3
ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100428/evregion-474)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSLD] (Node f7025600), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7024768), AE_TIME
ACPI Exception: AE_TIME, During Method _WAK (20100428/hwsleep-601)
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
tg3 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
tg3 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100506)
wl 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
wl 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
wl 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
wl 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
PM: early resume of devices complete after 2.675 msecs
i915 0000:00:02.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
tg3 0000:05:00.0: PME# disabled
wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:07:00.0: setting latency timer to 64
sd 0:0:0:0: [sda] Starting disk
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 3-2: reset full speed USB device using uhci_hcd and address 3
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
btusb 3-2:1.0: no reset_resume for driver btusb?
btusb 3-2:1.1: no reset_resume for driver btusb?
usb 1-8: reset high speed USB device using ehci_hcd and address 4
ata1.00: configured for UDMA/100
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
usb 3-1: reset full speed USB device using uhci_hcd and address 2
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
PM: resume of devices complete after 996.313 msecs
PM: Finishing wakeup.
Restarting tasks ...
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
donekorpenkraxar wrote:
Try this with a kernel 3.X version:
hpet=disable highres=off nohz=off
I have been trying to resolve the issue of suspend failing to resume on me Lenovo s10-3 (not the touch screen) for what seems an aeon.
A profound thank you to you all.
hpet=disable highres=off nohz=off
Works!
I now have no indication lights showing when the machine is suspended? But finally I can close the lid and reopen to resume - fantastic, this machine may finally see some more use.
I am running Linux Mint Debian Edition (LMDE) running Gnome 3 with 3 series kernels (presently liquorix 3.4.0-4.dmz.1-liquorix-686) -
Touchpad not working after suspend/resume on Asus R409LD
Hello,
I have installed Arch on my Asus laptop and I had issues with the FocalTech touchpad being detected as a generic mouse. This problem is now fixed in the mainline kernel which I use (cf https://wiki.archlinux.org/index.php/AS … #Touch_Pad).
However I still have a problem : when I suspend/resume my laptop, the touchpad ceases working.
Here is the output of xinput before suspending :
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ FocalTechPS/2 FocalTech FocalTech Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB Camera id=10 [slave keyboard (3)]
↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
I tried deactivating and reactivating psmouse but it doesn't work.
Wierdly, the touchpad is still listed by xinput after resuming, but doesn't work. And when I disable/enable psmouse it disappears from the output.
Here is a full dmseg with suspend/resume if it may help :
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-1-mainline (auguste@hal) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Mar 14 14:53:37 CET 2015
[ 0.000000] Command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba85b000-0x00000000c98b4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xba86a018-0xba877e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ba85b000-0x00000000ba86a017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba86a018-0x00000000ba877e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba877e58-0x00000000c98b4fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xc9e93000 ACPI 2.0=0xc9e93000 SMBIOS=0xcaf46318
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e39000) (14MB)
[ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e39000-0x000000007fc02000) (2013MB)
[ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007fc02000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000080000000-0x00000000b687a000) (872MB)
[ 0.000000] efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b687a000-0x00000000b697a000) (1MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b697a000-0x00000000b7f44000) (21MB)
[ 0.000000] efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7f44000-0x00000000b7f45000) (0MB)
[ 0.000000] efi: mem14: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000b7f45000-0x00000000b9d7e000) (30MB)
[ 0.000000] efi: mem15: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000b9d7e000-0x00000000b9d85000) (0MB)
[ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b9d85000-0x00000000b9ed9000) (1MB)
[ 0.000000] efi: mem17: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b9ed9000-0x00000000ba59b000) (6MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba59b000-0x00000000ba5b8000) (0MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ba5b8000-0x00000000ba5d2000) (0MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5d2000-0x00000000ba5db000) (0MB)
[ 0.000000] efi: mem21: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ba5db000-0x00000000ba85b000) (2MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba85b000-0x00000000ba86a000) (0MB)
[ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba86a000-0x00000000ba879000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba879000-0x00000000c72f8000) (202MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c72f8000-0x00000000c735c000) (0MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c735c000-0x00000000c7375000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7375000-0x00000000c7395000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7395000-0x00000000c73a5000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c73a5000-0x00000000c74af000) (1MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c74af000-0x00000000c74b0000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c74b0000-0x00000000c8c37000) (23MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c8c37000-0x00000000c95f3000) (9MB)
[ 0.000000] efi: mem33: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000c95f3000-0x00000000c98b5000) (2MB)
[ 0.000000] efi: mem34: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c98b5000-0x00000000c9a55000) (1MB)
[ 0.000000] efi: mem35: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c9a55000-0x00000000c9aca000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c9aca000-0x00000000c9e0f000) (3MB)
[ 0.000000] efi: mem37: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c9e0f000-0x00000000caad9000) (12MB)
[ 0.000000] efi: mem38: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caad9000-0x00000000caaf9000) (0MB)
[ 0.000000] efi: mem39: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caaf9000-0x00000000caafd000) (0MB)
[ 0.000000] efi: mem40: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caafd000-0x00000000cab00000) (0MB)
[ 0.000000] efi: mem41: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cab00000-0x00000000cab1d000) (0MB)
[ 0.000000] efi: mem42: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cab1d000-0x00000000cae70000) (3MB)
[ 0.000000] efi: mem43: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cae70000-0x00000000caea7000) (0MB)
[ 0.000000] efi: mem44: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea7000-0x00000000caea9000) (0MB)
[ 0.000000] efi: mem45: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea9000-0x00000000caf48000) (0MB)
[ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf48000-0x00000000caf6c000) (0MB)
[ 0.000000] efi: mem47: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf6c000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000001af200000) (2802MB)
[ 0.000000] efi: mem50: [Reserved |RUN| | | | | | | | ] range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem51: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem52: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem53: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem54: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem56: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. X450LD/X450LD, BIOS X450LD.208 06/11/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0180000000 mask 7FC0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 01B0000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 01AF800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 01AF400000 mask 7FFFC00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
[ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1aeffffff]
[ 0.000000] [mem 0x1a0000000-0x1aeffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19fffffff]
[ 0.000000] [mem 0x180000000-0x19fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9d7dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb9bfffff] page 2M
[ 0.000000] [mem 0xb9c00000-0xb9d7dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9d85000-0xba5dafff]
[ 0.000000] [mem 0xb9d85000-0xb9dfffff] page 4k
[ 0.000000] [mem 0xb9e00000-0xba3fffff] page 2M
[ 0.000000] [mem 0xba400000-0xba5dafff] page 4k
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba85b000-0xc98b4fff]
[ 0.000000] [mem 0xba85b000-0xba9fffff] page 4k
[ 0.000000] [mem 0xbaa00000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98b4fff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9aca000-0xc9e0efff]
[ 0.000000] [mem 0xc9aca000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e0efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fc02000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C9E93000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9E93090 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EA9800 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9E93258 0165A6 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB1BF80 000040
[ 0.000000] ACPI: APIC 0x00000000C9EA9910 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EA9988 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EA99D0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x00000000C9EA9A98 000094 (v01 ALASKA 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9B30 000174 (v01 Intel zpoddult 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9CA8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAA1E8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000C9EAACC0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000C9EAAD00 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: HPET 0x00000000C9EADD70 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EADDA8 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAE040 003EE7 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EB1F28 000CA1 (v01 SgRef SgPch 00001000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000C9EB2BD0 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: SSDT 0x00000000C9EB2C08 001480 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AC7E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1af1f5000-0x1af1f8fff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a8800000-ffff8801ae7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9d7dfff]
[ 0.000000] node 0: [mem 0x00000000b9d85000-0x00000000ba5dafff]
[ 0.000000] node 0: [mem 0x00000000ba85b000-0x00000000c98b4fff]
[ 0.000000] node 0: [mem 0x00000000c9aca000-0x00000000c9e0efff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001af1fffff]
[ 0.000000] On node 0 totalpages: 1542928
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12838 pages used for memmap
[ 0.000000] DMA32 zone: 821620 pages, LIFO batch:31
[ 0.000000] Normal zone: 11208 pages used for memmap
[ 0.000000] Normal zone: 717312 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9d7e000-0xb9d84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba5db000-0xba85afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba86a000-0xba86afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba877000-0xba877fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98b5000-0xc9ac9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e0f000-0xcab1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab1d000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8801aee00000 s87128 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s87128 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1518797
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] ACPI: _OSI method disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5953756K/6171712K available (5573K kernel code, 893K rwdata, 1788K rodata, 1168K init, 1156K bss, 217956K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2394.353 MHz processor
[ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.23 BogoMIPS (lpj=7981176)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20150204
[ 0.034560] ACPI: All ACPI Tables successfully acquired
[ 0.036629] Security Framework initialized
[ 0.036636] Yama: becoming mindful.
[ 0.037324] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039478] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040415] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040670] Initializing cgroup subsys blkio
[ 0.040674] Initializing cgroup subsys memory
[ 0.040681] Initializing cgroup subsys devices
[ 0.040684] Initializing cgroup subsys freezer
[ 0.040686] Initializing cgroup subsys net_cls
[ 0.040715] CPU: Physical Processor ID: 0
[ 0.040716] CPU: Processor Core ID: 0
[ 0.040721] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040722] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.041941] mce: CPU supports 7 MCE banks
[ 0.041957] CPU0: Thermal monitoring enabled (TM1)
[ 0.041970] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.041972] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.042092] Freeing SMP alternatives memory: 20K (ffffffff81a05000 - ffffffff81a0a000)
[ 0.043116] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.044495] ftrace: allocating 21346 entries in 84 pages
[ 0.056747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089782] TSC deadline timer enabled
[ 0.089786] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.089816] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.089843] ... version: 3
[ 0.089844] ... bit width: 48
[ 0.089845] ... generic registers: 4
[ 0.089847] ... value mask: 0000ffffffffffff
[ 0.089848] ... max period: 0000ffffffffffff
[ 0.089849] ... fixed-purpose events: 3
[ 0.089850] ... event mask: 000000070000000f
[ 0.109937] x86: Booting SMP configuration:
[ 0.109940] .... node #0, CPUs: #1
[ 0.122572] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.126042] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.129984] #2 #3
[ 0.165939] x86: Booted up 1 node, 4 CPUs
[ 0.165943] smpboot: Total of 4 processors activated (19162.94 BogoMIPS)
[ 0.170937] devtmpfs: initialized
[ 0.173870] PM: Registering ACPI NVS region [mem 0xb9d7e000-0xb9d84fff] (28672 bytes)
[ 0.173872] PM: Registering ACPI NVS region [mem 0xc9e0f000-0xcab1cfff] (13688832 bytes)
[ 0.174282] pinctrl core: initialized pinctrl subsystem
[ 0.174328] RTC time: 14:49:34, date: 03/14/15
[ 0.174468] NET: Registered protocol family 16
[ 0.187440] cpuidle: using governor ladder
[ 0.200788] cpuidle: using governor menu
[ 0.200839] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.200841] ACPI: bus type PCI registered
[ 0.200843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.200937] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.201048] PCI: Using configuration type 1 for base access
[ 0.214532] ACPI: Added _OSI(Module Device)
[ 0.214535] ACPI: Added _OSI(Processor Device)
[ 0.214536] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.214538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218484] ACPI : EC: EC description table is found, configuring boot EC
[ 0.222593] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.234176] ACPI: Dynamic OEM Table Load:
[ 0.234185] ACPI: SSDT 0xFFFF8801A7134800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.235459] ACPI: Dynamic OEM Table Load:
[ 0.235467] ACPI: SSDT 0xFFFF8801A709A000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.236797] ACPI: Dynamic OEM Table Load:
[ 0.236803] ACPI: SSDT 0xFFFF8801A7114A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.238841] ACPI: Interpreter enabled
[ 0.238853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.238863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.238892] ACPI: (supports S0 S3 S4 S5)
[ 0.238894] ACPI: Using IOAPIC for interrupt routing
[ 0.238931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.240682] ACPI: Power Resource [PC05] (on)
[ 0.255005] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255012] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.255033] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255037] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.256966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.256974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.257651] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.258130] PCI host bridge to bus 0000:00
[ 0.258134] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.258137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.258139] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.258141] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.258143] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.258145] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.258147] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.258149] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.258151] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.258153] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.258155] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.258157] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.258159] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
[ 0.258169] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.258303] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.258318] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.258327] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.258334] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.258456] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.258467] pci 0000:00:03.0: reg 0x10: [mem 0xf7a1c000-0xf7a1ffff 64bit]
[ 0.258597] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 0.258612] pci 0000:00:04.0: reg 0x10: [mem 0xf7a10000-0xf7a17fff 64bit]
[ 0.258761] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.258781] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.258849] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.258907] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.258954] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.258975] pci 0000:00:16.0: reg 0x10: [mem 0xf7a25000-0xf7a2501f 64bit]
[ 0.259046] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.259156] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.259173] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
[ 0.259250] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.259309] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.259353] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.259428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.259489] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.259533] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.259611] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.259672] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.259717] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.259794] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.259855] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.259900] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.259977] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.260053] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.260107] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.260130] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a23000-0xf7a233ff]
[ 0.260231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.260306] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.260356] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.260569] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.260586] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.260595] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.260603] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.260611] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.260619] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.260627] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a22000-0xf7a227ff]
[ 0.260670] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.260765] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.260781] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a21000-0xf7a210ff 64bit]
[ 0.260803] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.260996] acpiphp: Slot [1] registered
[ 0.261002] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.261103] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
[ 0.261131] pci 0000:02:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[ 0.261144] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.261271] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.261309] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.267583] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.267587] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.267591] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.269364] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
[ 0.269385] pci 0000:03:00.0: reg 0x10: [mem 0xf7810000-0xf781ffff]
[ 0.269534] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.269571] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.271295] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.271315] pci 0000:03:00.1: reg 0x10: [mem 0xf7800000-0xf780ffff]
[ 0.271464] pci 0000:03:00.1: supports D1
[ 0.271466] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.279635] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.279641] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.279744] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
[ 0.279769] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.279792] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279816] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.279831] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 0.279847] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.279982] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.284661] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.284665] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.284668] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.284674] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.284707] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.285766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.285822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285979] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286080] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286172] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.286178] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.286526] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.286627] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.286757] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.286760] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.286764] vgaarb: loaded
[ 0.286765] vgaarb: bridge control possible 0000:00:02.0
[ 0.286917] PCI: Using ACPI for IRQ routing
[ 0.288384] PCI: pci_cache_line_size set to 64 bytes
[ 0.288438] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.288440] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.288442] e820: reserve RAM buffer [mem 0xb9d7e000-0xbbffffff]
[ 0.288444] e820: reserve RAM buffer [mem 0xba5db000-0xbbffffff]
[ 0.288445] e820: reserve RAM buffer [mem 0xba86a018-0xbbffffff]
[ 0.288447] e820: reserve RAM buffer [mem 0xc98b5000-0xcbffffff]
[ 0.288449] e820: reserve RAM buffer [mem 0xc9e0f000-0xcbffffff]
[ 0.288451] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.288453] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
[ 0.288579] NetLabel: Initializing
[ 0.288580] NetLabel: domain hash size = 128
[ 0.288581] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.288596] NetLabel: unlabeled traffic allowed by default
[ 0.288627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.288633] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.290662] Switched to clocksource hpet
[ 0.296419] pnp: PnP ACPI init
[ 0.296545] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.296549] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.296845] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.296848] system 00:01: [io 0xffff] has been reserved
[ 0.296850] system 00:01: [io 0xffff] has been reserved
[ 0.296852] system 00:01: [io 0xffff] has been reserved
[ 0.296854] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.296856] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.296859] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.296861] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.296863] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.296865] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.296868] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296905] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.296966] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.296969] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.297030] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.297033] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297073] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.297075] system 00:05: [io 0x0380-0x038f] has been reserved
[ 0.297077] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297149] pnp 00:06: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.297194] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.297753] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.297756] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.297759] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.297762] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.297765] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.297768] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.297771] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.297774] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.297777] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.297780] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.297783] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.297785] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.297789] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297888] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298113] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.298119] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.298320] pnp: PnP ACPI: found 10 devices
[ 0.304961] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.304974] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.304978] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.304983] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.304991] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.304996] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.305004] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.305007] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.305012] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.305016] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.305026] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.305028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.305030] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.305032] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.305034] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.305036] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.305038] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.305040] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.305042] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.305044] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.305046] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff window]
[ 0.305049] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.305051] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.305053] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.305055] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.305057] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.305059] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305092] NET: Registered protocol family 2
[ 0.305327] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.305508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305650] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.305671] TCP: reno registered
[ 0.305686] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305719] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305779] NET: Registered protocol family 1
[ 0.305797] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.306052] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.306077] PCI: CLS 64 bytes, default 64
[ 0.306126] Unpacking initramfs...
[ 0.388937] Freeing initrd memory: 4088K (ffff88007fc02000 - ffff880080000000)
[ 0.388947] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.388951] software IO TLB [mem 0xc32f8000-0xc72f8000] (64MB) mapped at [ffff8800c32f8000-ffff8800c72f7fff]
[ 0.389171] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.389230] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389238] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389248] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389258] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389313] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.389343] Scanning for low memory corruption every 60 seconds
[ 0.389619] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.389637] Initialise system trusted keyring
[ 0.390008] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391638] zpool: loaded
[ 0.391641] zbud: loaded
[ 0.391847] VFS: Disk quotas dquot_6.5.2
[ 0.391886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392076] Key type big_key registered
[ 0.392275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.392313] io scheduler noop registered
[ 0.392316] io scheduler deadline registered
[ 0.392350] io scheduler cfq registered (default)
[ 0.393087] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.393092] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.393109] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.393111] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.393115] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.393130] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.393132] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.393134] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.393138] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.393154] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.393156] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.393160] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.393168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393186] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393205] efifb: probing for efifb
[ 0.393226] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 4128k, total 4128k
[ 0.393228] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.393229] efifb: scrolling: redraw
[ 0.393231] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.396869] Console: switching to colour frame buffer device 170x48
[ 0.400357] fb0: EFI VGA frame buffer device
[ 0.400367] intel_idle: MWAIT substates: 0x11142120
[ 0.400369] intel_idle: v0.4 model 0x45
[ 0.400370] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.400674] GHES: HEST is not enabled!
[ 0.400759] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.401281] Linux agpgart interface v0.103
[ 0.401345] rtc_cmos 00:02: RTC can wake from S4
[ 0.401480] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.401510] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.401526] Intel P-state driver initializing.
[ 0.401679] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.402207] TCP: cubic registered
[ 0.402436] NET: Registered protocol family 10
[ 0.402861] NET: Registered protocol family 17
[ 0.403549] Loading compiled-in X.509 certificates
[ 0.403578] registered taskstats version 1
[ 0.404855] Magic number: 7:305:839
[ 0.405045] rtc_cmos 00:02: setting system clock to 2015-03-14 14:49:34 UTC (1426344574)
[ 0.405254] PM: Hibernation image not present or could not be loaded.
[ 0.405865] Freeing unused kernel memory: 1168K (ffffffff818e1000 - ffffffff81a05000)
[ 0.405869] Write protecting the kernel read-only data: 8192k
[ 0.406503] Freeing unused kernel memory: 560K (ffff880001574000 - ffff880001600000)
[ 0.406722] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 0.415600] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.428621] sdhci: Secure Digital Host Controller Interface driver
[ 0.428624] sdhci: Copyright(c) Pierre Ossman
[ 0.432810] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.434654] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.434686] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.438789] ACPI: bus type USB registered
[ 0.438822] usbcore: registered new interface driver usbfs
[ 0.438836] usbcore: registered new interface driver hub
[ 0.438866] usbcore: registered new device driver usb
[ 0.439456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.439732] ehci-pci: EHCI PCI platform driver
[ 0.439788] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.439796] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.439810] ehci-pci 0000:00:1d.0: debug port 2
[ 0.440689] SCSI subsystem initialized
[ 0.441807] libata version 3.00 loaded.
[ 0.443716] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.443738] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
[ 0.450881] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.457612] hub 1-0:1.0: USB hub found
[ 0.457623] hub 1-0:1.0: 2 ports detected
[ 0.457875] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457882] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457958] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00003810
[ 0.457964] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.458152] hub 2-0:1.0: USB hub found
[ 0.458161] hub 2-0:1.0: 9 ports detected
[ 0.460386] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460389] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460507] hub 3-0:1.0: USB hub found
[ 0.460513] hub 3-0:1.0: 4 ports detected
[ 0.461400] ahci 0000:00:1f.2: version 3.0
[ 0.461544] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.474228] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.474234] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.474875] scsi host0: ahci
[ 0.475020] scsi host1: ahci
[ 0.475159] scsi host2: ahci
[ 0.475279] scsi host3: ahci
[ 0.475335] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 45
[ 0.475337] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 45
[ 0.475339] ata3: DUMMY
[ 0.475340] ata4: DUMMY
[ 0.483062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.764471] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.794476] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.797272] ata1.00: ATA-9: Corsair Force LX SSD, N0307A, max UDMA/133
[ 0.797277] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 0.797611] ata1.00: configured for UDMA/133
[ 0.797790] scsi 0:0:0:0: Direct-Access ATA Corsair Force LX 7A PQ: 0 ANSI: 5
[ 0.817843] usb 2-5: new high-speed USB device number 2 using xhci_hcd
[ 0.888974] hub 1-1:1.0: USB hub found
[ 0.889039] hub 1-1:1.0: 8 ports detected
[ 1.118072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.121576] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100
[ 1.126383] ata2.00: configured for UDMA/100
[ 1.134312] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5
[ 1.145602] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.145650] sd 0:0:0:0: [sda] Write Protect is off
[ 1.145655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.145664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.149453] sda: sda1 sda2 sda3
[ 1.149802] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.159142] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.159146] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.159335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.270792] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.332987] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.333146] systemd[1]: Detected architecture 'x86-64'.
[ 1.333579] systemd[1]: Set hostname to <hal>.
[ 1.390731] systemd[1]: Starting Login Prompts.
[ 1.390866] systemd[1]: Reached target Login Prompts.
[ 1.390892] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.391053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.391068] systemd[1]: Expecting device dev-sda1.device...
[ 1.391131] systemd[1]: Starting Swap.
[ 1.391189] systemd[1]: Reached target Swap.
[ 1.391204] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.391237] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.391251] systemd[1]: Starting Root Slice.
[ 1.391516] systemd[1]: Created slice Root Slice.
[ 1.391530] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.391586] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 1.391660] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.391676] systemd[1]: Starting Journal Socket.
[ 1.391774] systemd[1]: Listening on Journal Socket.
[ 1.391804] systemd[1]: Starting User and Session Slice.
[ 1.391891] systemd[1]: Created slice User and Session Slice.
[ 1.391899] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.391955] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.391963] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.392014] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.392021] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.392076] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.392083] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.392142] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.404539] systemd[1]: Listening on Journal Audit Socket.
[ 1.404567] systemd[1]: Starting System Slice.
[ 1.404753] systemd[1]: Created slice System Slice.
[ 1.405170] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.405256] systemd[1]: Mounting Debug File System...
[ 1.405704] systemd[1]: Starting Setup Virtual Console...
[ 1.406206] systemd[1]: Starting Journal Service...
[ 1.406973] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.407431] systemd[1]: Starting system-getty.slice.
[ 1.407583] systemd[1]: Created slice system-getty.slice.
[ 1.407652] systemd[1]: Mounting Huge Pages File System...
[ 1.408243] systemd[1]: Started File System Check on Root Device.
[ 1.408275] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.408675] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.408786] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.408802] systemd[1]: Starting Encrypted Volumes.
[ 1.408843] systemd[1]: Reached target Encrypted Volumes.
[ 1.408860] systemd[1]: Starting udev Control Socket.
[ 1.408920] systemd[1]: Listening on udev Control Socket.
[ 1.409625] systemd[1]: Mounting Temporary Directory...
[ 1.410189] systemd[1]: Starting udev Kernel Socket.
[ 1.410267] systemd[1]: Listening on udev Kernel Socket.
[ 1.410296] systemd[1]: Starting udev Coldplug all Devices...
[ 1.411636] systemd[1]: Started Load Kernel Modules.
[ 1.411663] systemd[1]: Mounted FUSE Control File System.
[ 1.411711] systemd[1]: Mounting Configuration File System...
[ 1.412105] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.412517] systemd[1]: Starting Remote File Systems.
[ 1.412594] systemd[1]: Reached target Remote File Systems.
[ 1.412633] systemd[1]: Starting Apply Kernel Variables...
[ 1.413108] systemd[1]: Expecting device dev-sda3.device...
[ 1.413180] systemd[1]: Starting Slices.
[ 1.413242] systemd[1]: Reached target Slices.
[ 1.413268] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.413329] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.413348] systemd[1]: Starting Paths.
[ 1.413415] systemd[1]: Reached target Paths.
[ 1.413980] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.415449] systemd[1]: Started Setup Virtual Console.
[ 1.417502] systemd[1]: Mounted Configuration File System.
[ 1.417780] EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
[ 1.419393] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.420243] systemd[1]: Mounted Debug File System.
[ 1.420980] systemd[1]: Mounted Huge Pages File System.
[ 1.421670] systemd[1]: Mounted Temporary Directory.
[ 1.422842] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.431714] systemd[1]: Started Apply Kernel Variables.
[ 1.432536] systemd[1]: Started udev Coldplug all Devices.
[ 1.437198] systemd[1]: Starting Load/Save Random Seed...
[ 1.438791] systemd[1]: Started Rebuild Hardware Database.
[ 1.438826] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 1.438844] systemd[1]: Started First Boot Wizard.
[ 1.438860] systemd[1]: Started Create System Users.
[ 1.438917] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.443195] systemd[1]: Started Load/Save Random Seed.
[ 1.459454] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.460356] systemd[1]: Starting udev Kernel Device Manager...
[ 1.461282] systemd[1]: Starting Local File Systems (Pre).
[ 1.461977] systemd[1]: Reached target Local File Systems (Pre).
[ 1.531924] systemd[1]: Started udev Kernel Device Manager.
[ 1.553706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.556325] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.561234] ACPI: Lid Switch [LID]
[ 1.561319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.561324] ACPI: Sleep Button [SLPB]
[ 1.561393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.561396] ACPI: Power Button [PWRF]
[ 1.580408] ACPI: AC Adapter [AC0] (on-line)
[ 1.606236] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.610817] [drm] Initialized drm 1.1.0 20060810
[ 1.647229] ACPI: Battery Slot [BAT0] (battery present)
[ 1.647475] wmi: Mapper loaded
[ 1.677123] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 1.677422] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 1.677426] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.677429] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 1.677431] sound hdaudioC1D0: mono: mono_out=0x0
[ 1.677433] sound hdaudioC1D0: inputs:
[ 1.677436] sound hdaudioC1D0: Internal Mic=0x1a
[ 1.677439] sound hdaudioC1D0: Mic=0x19
[ 1.677929] thermal LNXTHERM:00: registered as thermal_zone2
[ 1.677933] ACPI: Thermal Zone [THRM] (42 C)
[ 1.678052] sound hdaudioC1D0: Enable sync_write for stable communication
[ 1.680963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input5
[ 1.681093] [drm] Memory usable by graphics device = 2048M
[ 1.681097] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[ 1.681099] fb: switching to inteldrmfb from EFI VGA
[ 1.681124] Console: switching to colour dummy device 80x25
[ 1.681211] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 1.681232] [drm] Replacing VGA console driver
[ 1.681254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 1.686528] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 1.693423] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [78:24:af:6c:a3:75]
[ 1.701875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.701878] [drm] Driver supports precise vblank timestamp query.
[ 1.701979] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.709764] systemd[1]: Found device Corsair_Force_LX_SSD 3.
[ 1.710440] systemd[1]: Found device Corsair_Force_LX_SSD ESP.
[ 1.710484] systemd[1]: Mounting /boot...
[ 1.711777] systemd[1]: Starting File System Check on /dev/sda3...
[ 1.717424] iTCO_vendor_support: vendor-support=0
[ 1.717576] AVX2 version of gcm_enc/dec engaged.
[ 1.717578] AES CTR mode by8 optimization enabled
[ 1.717646] cfg80211: Calling CRDA to update world regulatory domain
[ 1.717946] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.717986] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.718109] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.718376] media: Linux media interface: v0.10
[ 1.727078] systemd[1]: Starting Sound Card.
[ 1.727130] systemd[1]: Reached target Sound Card.
[ 1.729262] asus_wmi: ASUS WMI generic driver loaded
[ 1.729427] Linux video capture interface: v2.00
[ 1.730834] asus_wmi: Initialization: 0x1
[ 1.730877] asus_wmi: BIOS WMI version: 7.9
[ 1.730930] asus_wmi: SFUN value: 0x4a0877
[ 1.731917] alx 0000:02:00.0 enp2s0: renamed from eth0
[ 1.732263] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[ 1.748309] fbcon: inteldrmfb (fb0) is primary device
[ 1.751204] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.761392] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1.765545] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.772307] asus_wmi: Backlight controlled by ACPI video driver
[ 1.794652] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
[ 1.797927] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
[ 1.798396] intel_rapl: Found RAPL domain package
[ 1.798398] intel_rapl: Found RAPL domain core
[Still no ideas ?
-
SOA 11.1.1.3.0 - Connection Pool has been suspended during weak load
Hi,
I have a SCA with different BPEL, all uses several db adapters.
Each db adapter has retry count set to 1.
Each bpel has the following properties:
<property name="bpel.config.transaction" many="false">required</property>
<property name="bpel.config.inMemoryOptimization">true</property>
<property name="bpel.config.completionPersistPolicy">off</property>When I do a simple load testing (with 10 concurrent threads invoking the same SCA webservice) my connection pool is suspended.
Here is my connection pool configuration:
<?xml version='1.0' encoding='UTF-8'?>
<jdbc-data-source xmlns="http://xmlns.oracle.com/weblogic/jdbc-data-source" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/jdbc-data-source http://xmlns.oracle.com/weblogic/jdbc-data-source/1.0/jdbc-data-source.xsd">
<name>DEV__DB</name>
<jdbc-driver-params>
<url>jdbc:oracle:thin:@10.17.5.50:1521:orcl</url>
<driver-name>oracle.jdbc.xa.client.OracleXADataSource</driver-name>
<properties>
<property>
<name>user</name>
<value>DEV_</value>
</property>
</properties>
<password-encrypted>{AES}UiaJC9d4Fl7jWHkcrYttu5E+wpOB4Jw1QKwTSA0ARtE=</password-encrypted>
<use-xa-data-source-interface>true</use-xa-data-source-interface>
</jdbc-driver-params>
<jdbc-connection-pool-params>
<initial-capacity>0</initial-capacity>
<max-capacity>100</max-capacity>
<capacity-increment>1</capacity-increment>
<shrink-frequency-seconds>900</shrink-frequency-seconds>
<highest-num-waiters>2147483647</highest-num-waiters>
<connection-creation-retry-frequency-seconds>10</connection-creation-retry-frequency-seconds>
<connection-reserve-timeout-seconds>10</connection-reserve-timeout-seconds>
<test-frequency-seconds>300</test-frequency-seconds>
<test-connections-on-reserve>true</test-connections-on-reserve>
<ignore-in-use-connections-enabled>true</ignore-in-use-connections-enabled>
<inactive-connection-timeout-seconds>0</inactive-connection-timeout-seconds>
<test-table-name>SQL SELECT 1 FROM DUAL</test-table-name>
<login-delay-seconds>0</login-delay-seconds>
<statement-cache-size>100</statement-cache-size>
<statement-cache-type>LRU</statement-cache-type>
<remove-infected-connections>true</remove-infected-connections>
<seconds-to-trust-an-idle-pool-connection>0</seconds-to-trust-an-idle-pool-connection>
<statement-timeout>-1</statement-timeout>
<jdbc-xa-debug-level>10</jdbc-xa-debug-level>
<pinned-to-thread>false</pinned-to-thread>
</jdbc-connection-pool-params>
<jdbc-data-source-params>
<jndi-name>jdbc/soSvilDB</jndi-name>
<global-transactions-protocol>TwoPhaseCommit</global-transactions-protocol>
</jdbc-data-source-params>
<jdbc-xa-params>
<keep-xa-conn-till-tx-complete>true</keep-xa-conn-till-tx-complete>
<need-tx-ctx-on-close>false</need-tx-ctx-on-close>
<xa-end-only-once>false</xa-end-only-once>
<keep-logical-conn-open-on-release>false</keep-logical-conn-open-on-release>
<resource-health-monitoring>true</resource-health-monitoring>
<recover-only-once>false</recover-only-once>
<xa-set-transaction-timeout>false</xa-set-transaction-timeout>
<xa-transaction-timeout>0</xa-transaction-timeout>
<rollback-local-tx-upon-conn-close>false</rollback-local-tx-upon-conn-close>
<xa-retry-duration-seconds>300</xa-retry-duration-seconds>
<xa-retry-interval-seconds>60</xa-retry-interval-seconds>
</jdbc-xa-params>
</jdbc-data-source>Here is the error:
[2011-04-22T12:36:52.026+02:00] [OJDL] [NOTIFICATION:16] [ODL-52001] [oracle.core.ojdl.FileLogWriter] [org: Oracle] [host: soa.linux55.reply] [nwaddr: 10.17.5.69] [tid: [ACTIVE].ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oracle] deleting log file: soa_server1-diagnostic-179.log, size: 10485438 bytes
[2011-04-22T12:36:51.985+02:00] [soa_server1] [ERROR] [] [oracle.soa.mediator.serviceEngine] [tid: [ACTIVE].ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000Ixwm9CqEcLH5yvs1yW1DgLRV000081,0] [WEBSERVICE_PORT.name: AlarmsRetrieverPortType_pt] [APP: soa-infra] [composite_name: AlarmRetreiverProject] [component_name: AlarmRetrieverMediator] [component_instance_id: 6E8716B06CCC11E0AF65F721A176C6C2] [J2EE_MODULE.name: fabric] [dcid: 0f2f96dd491b9522:5032bc97:12f7cbc8b1d:-7ffc-0000000000001701] [WEBSERVICE.name: AlarmRetrieverMediator_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 250014] Got an exception: oracle.fabric.common.FabricInvocationException: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}[[
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'GetTrainAlarms_dba' failed due to: Pure SQL Exception.
Pure SQL Execute of select aa.* from <OMITTED>
Caused by java.sql.SQLException: Internal error: Cannot obtain XAConnection weblogic.common.resourcepool.ResourceDisabledException: Pool DEV__DB is Suspended, cannot allocate resources to applications..
at weblogic.common.resourcepool.ResourcePoolImpl.reserveResourceInternal(ResourcePoolImpl.java:357)
at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:332)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:440)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:317)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:93)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:61)
at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1670)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1438)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:126)
at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94)
at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.connectInternal(DatasourceAccessor.java:327)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.connectInternal(DatabaseAccessor.java:295)
at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.reconnect(DatasourceAccessor.java:558)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.reconnect(DatabaseAccessor.java:1437)
at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.incrementCallCount(DatasourceAccessor.java:303)
at oracle.tip.adapter.db.DBConnection.getTopLinkSQLConnection(DBConnection.java:335)
at oracle.tip.adapter.db.transaction.DBTransaction.beginInternal(DBTransaction.java:126)
at oracle.tip.adapter.db.puresql.PureSQLInteraction.executePureSQL(PureSQLInteraction.java:165)
at oracle.tip.adapter.db.DBInteraction.executePureSQL(DBInteraction.java:1178)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:255)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:303)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeJcaReference(JCAInteractionInvoker.java:519)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeSyncJcaReference(JCAInteractionInvoker.java:492)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAEndpointInteraction.performSynchronousInteraction(JCAEndpointInteraction.java:472)
at oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:166)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
at sun.reflect.GeneratedMethodAccessor925.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy284.request(Unknown Source)
at oracle.fabric.CubeServiceEngine.requestToMesh(CubeServiceEngine.java:797)
at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:262)
at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1073)
at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:526)
at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:127)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:70)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:162)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2465)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1133)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:219)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:327)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4350)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4282)
at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:713)
at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:545)
at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:108)
at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvokeParticipate(CubeEngineBean.java:186)
at sun.reflect.GeneratedMethodAccessor930.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
at sun.reflect.GeneratedMethodAccessor833.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy282.syncCreateAndInvokeParticipate(Unknown Source)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.syncCreateAndInvokeParticipate(BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.java:328)
at com.collaxa.cube.engine.delivery.DeliveryHandler.callCreateAndInvoke(DeliveryHandler.java:788)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:528)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:487)
at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:162)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.request(CubeDeliveryBean.java:607)
at sun.reflect.GeneratedMethodAccessor933.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
at sun.reflect.GeneratedMethodAccessor833.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy279.request(Unknown Source)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.request(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:462)
at oracle.fabric.CubeServiceEngine.request(CubeServiceEngine.java:358)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
at sun.reflect.GeneratedMethodAccessor925.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy284.request(Unknown Source)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.request2Mesh(MediatorServiceEngine.java:1063)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:202)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:94)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:74)
at oracle.tip.mediator.service.SyncRequestResponseHandler.process(SyncRequestResponseHandler.java:79)
at oracle.tip.mediator.service.ActionProcessor.onMessage(ActionProcessor.java:64)
at oracle.tip.mediator.dispatch.MessageDispatcher.executeCase(MessageDispatcher.java:140)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCase(InitialMessageDispatcher.java:495)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases(InitialMessageDispatcher.java:393)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processNormalCases(InitialMessageDispatcher.java:276)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases(InitialMessageDispatcher.java:251)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.dispatch(InitialMessageDispatcher.java:148)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process(MediatorServiceEngine.java:860)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.request(MediatorServiceEngine.java:716)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
at sun.reflect.GeneratedMethodAccessor925.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy284.request(Unknown Source)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:186)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>Internal error: Cannot obtain XAConnection weblogic.common.resourcepool.ResourceDisabledException: Pool DEV__DB is Suspended, cannot allocate resources to applications..
at weblogic.common.resourcepool.ResourcePoolImpl.reserveResourceInternal(ResourcePoolImpl.java:357)
at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:332)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:440)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:317)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:93)
</detail>
,code=<code>0</code>}
oracle.tip.mediator.infra.exception.MediatorException: ORAMED-03303:[Unexpected exception in case execution]Unexpected exception in request response operation "process" on reference "DEV_bpel_client". Possible Fix:Check whether the reference service is properly configured and running or look at exception for analysing the reason or contact oracle support.
at oracle.tip.mediator.service.SyncRequestResponseHandler.handleFault(SyncRequestResponseHandler.java:215)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.fabric.common.FabricInvocationException: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}I configured it using the Oracle User Guide For Technology Adapters, paragraph 2.21, but I still have the issue.
Please can someone help me out?Also, the strange thing is that if I monitor the Datasource (that has a 100 conn. capacity) I see that it is not overloaded:
Server Sorted Ascending Enabled State JDBC Driver Active Connections Average Count Active Connections Current Count Active Connections High Count Connection Delay Time Connections Total Count Curr Capacity High Count Current Capacity Failed Reserve Request Count Failures To Reconnect Count Highest Num Available Leaked Connection Count Num Available Num Unavailable Prep Stmt Cache Add Count Prep Stmt Cache Current Size Prep Stmt Cache Delete Count Prep Stmt Cache Hit Count Prep Stmt Cache Miss Count PrepStmt Cache Access Count Reserve Request Count Wait Seconds High Count Waiting For Connection Current Count Waiting For Connection Failure Total Waiting For Connection High Count Waiting For Connection Success Total Waiting For Connection Total
soa_server1 false Suspended oracle.jdbc.xa.client.OracleXADataSource 0 9 9 19049 36 10 9 81 0 10 0 0 9 18 18 0 0 18 18 380 0 0 0 0 35 0 -
I need help diagnosing an issue where TCP communications breaks down between my host (Windows) and a PXI (LabVIEW RT 2010).
The bottom-line questions are these:
1...Are there circumstances in which TCP WRITE, given a string of say, 10 characters, will write more than zero and fewer than 10 characters to the connection? If so, what are those circumstances?
2...Is it risky to use a timeout value of 1 mSec? Further thought seems to say that I won't get a 1000 uSec timeout if we're using a 1-mSec timebase, but I don't know if that's true in the PXI.
Background:
On the PXI, I'm running a 100-Hz PID loop, controlling an engine. I measure the speed and torque, and control the speed and throttle. Along the way, I'm measuring 200 channels of misc stuff (analog, CAN, TCP instruments) at 10 Hz and sending gobs of info to the host (200 chans * 8 = 1600 bytes every 0.1 sec)
The host sends commands, the PXI responds.
The message protocol is a fixed-header, variable payload type: a message is a fixed 3-byte header, consisting of a U8 OpCode, and a U16 PAYLOAD SIZE field. I flatten some structure to a string, measure its size, and prepend the header and send it as one TCP WRITE. I receive in two TCP READs: one for the header, then I unflatten the header, read the PAYLOAD SIZE and then another read for that many more bytes.
The payload can thus be zero bytes: a TCP READ with a byte count of zero is legal and will succeed without error.
A test starts with establishing a connection, some configuration stuff, and then sampling starts. The 10-Hz data stream is shown on the host screen at 2-Hz as numeric indicators, or maybe selected channels in a chart.
At some point the user starts RECORDING, and the 10-Hz data goes into a queue for later writing to a file. This is while the engine is being driven thru a prescribed cycle of speed/torque target points.
The recording lasts for 20 or in some cases 40 minutes (24000 samples) and then recording stops, but sampling doesn't. Data is still coming in and charted. The user can then do some special operations, related to calibration checks and leak checks, and those results are remembered. Finally, they hit the DONE button, and the whole mess gets written to a file.
All of this has worked fine for several years, but as the system is growing (more devices, more channels, more code), a problem has cropped up: the two ends are occasionally getting out of synch.
The test itself, and all the configuration stuff before, is working perfectly. The measurement immediately after the test is good. At some point after that, it goes south. The log shows the PXI sending results for operations that were not requested. The data in those results is garbage; 1.92648920e-299 and such numbers, resulting from interpreting random stuff as a DBL.
After I write the file, the connection is broken, the next test re-establishes it, and all is well again.
In chasing all this, I've triple-checked that all my SENDs are MEASURING the size of the payload before sending it. Two possibilities have come up:
1... There is a message with a payload over 64k. If my sender were presented with a string of length 65537, it would convert that to a U16 of value 1, and the receiver would expect 1 byte. The receiver would then expect another header, but this data comes instead, and we're off the rails.
I don't believe that's happening. Most of the messages are fewer than 20 bytes payload, the data block is 1600 or so, I see no evidence for such a thing to happen.
2... The PXI is failing, under certain circumstances, to send the whole message given to TCP WRITE. If it sent out a header promising 20 more bytes, but only delivered 10, then the receiver would see the header and expect 20 more. 10 would come immediately, but whatever the NEXT message was, it's header would be construed as part of the payload of the first message, and we're off the rails.
Unfortunately, I am not checking the error return from TCP write, since it never failed in my testing here (I know, twenty lashes for me).
It also occurs to me that I am giving it a 1-mSec timeout value, since I'm in a 100-Hz loop. Perhaps I should have separated the TCP stuff into a separate thread. In any case, maybe I don't get a full 1000 uSec, due to clock resolution issues.
That means that TCP WRITE cannot get the data written before the TIMEOUT expires, but it has written part of it.
I suspect, but the logs don't prove, that the point of failure is when they hit the DONE button. The general CPU usage on the PXI is 2-5% but at that point there are 12-15 DAQ domain managers to be shutting down, so the instantaneous CPU load is high. If that happens to coincide with a message going out, well, maybe the problem crops up. It doesn't happen every time.
So I repeat the two questions:
1...Are there circumstances in which TCP WRITE, given a string of say, 10 characters, will write more than zero and fewer than 10 characters to the connection? If so, what are those circumstances?
2...Is it risky to use a timeout value of 1 mSec? Further thought seems to say that I won't get a 1000 uSec timeout if we're using a 1-mSec timebase, but I don't know if that's true in the PXI.
Thanks,
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Solved!
Go to Solution.There are a couple of issues at play here, and both are working together to cause your issue(s).
1) LV RT will suspend the TCP thread when your CPU utilization goes up to 100%. When this happens, your connection to the outside world simply goes away and your communications can get pretty screwed up. (More here)
Unless you create some form of very robust resend and timeout strategy your only other solution would be to find a way to keep your CPU from maxing out. This may be through the use of some scheduler to limit how many processes are running at a particular time or other code optimization. Any way you look at it, 100% CPU = Loss of TCP comms.
2) The standard method of TCP communication shown in all examples I have seen to date uses a similar method to transfer data where a header is sent with the data payload size to follow.
<packet 1 payload size (2 bytes)><packet 1 payload..........><packet 2 payload size (2 bytes)><packet 2 payload.......................>
On the Rx side, the header is read, the payload size extracted then a TCP read is set with the desired size. Under normal circumstances this works very well and is a particularly efficent method of transferring data. When you suspend the TCP thread during a Rx operation, this header can get corrupted and pass the TCP Read a bad payload size due to a timeout on the previous read. As an example the header read expects 20 bytes but due to the TCP thread suspension only gets 10 before the timeout. The TCP Read returns only those 10 bytes, leaving the other 10 bytes in the Rx buffer for the next read operation. The subsequent TCP Read now gets the first 2 bytes from the remaining data payload (10 bytes) still in the buffer. This gives you a further bad payload read size and the process continues OR if you happen to get a huge number back, when you try to allocate a gigantic TCP receive buffer, you get an out of memory error.
The issue now is that your communications are out of sync. The Rx end is not interpeting the correct bytes as the header thus this timeout or bad data payload behavior can continue for quite a long time. I have found that occasionally (although very rare) the system will fall back into sync however it really is a crap shoot at this point.
I more robust way of dealing with the communication issue is to change your TCP read to terminate on a CRLF as opposed to the number of bytes or timeout (The TCP Read has an enum selctor for switching the mode. In this instance, whenever a CRLF is seen, the TCP Read will immediately terminate and return data. If the payload is corrupted, then it will fail to be parsed correctly or would encounter a checksum failure and be discarded or a resend request issued. In either case, the communications link will automatically fall back into sync between the Tx and Rx side. The one other thing that you must do is to encode your data to ensure that no CRLF characters exist in the payload. Base64 encode/decode works well. You do give up some bandwith due to the B64 strings being longer, however the fact that the comm link is now self syncing is normally a worthwhile sacrifice.
When running on any other platform other than RT, the <header><payload> method of transmitting data works fine as TCP guarantees transmission of the data, however on RT platforms due to the suspension of the TCP thread on high CPU excursions this method fails miserably. -
[SOLVED] Poweroff, suspend and hibernate don't work
I installed Archlinux on my work desktop on Monday and can't get poweroff, suspend and hibernate to work. The command `systemctl poweroff` sort of works, except it doesn't actually turn off the computer. Suspend and hibernate don't work at all, the computer hangs on the terminal with a cursor on the top left corner of the screen. Here is the log from `journalctl`. There doesn't seem to be any error messages in it, as far as I can see.
Apr 16 10:02:55 carolfs-ifusp sudo[1127]: carolfs : TTY=pts/0 ; PWD=/home/carolfs ; USER=root ; COMMAND=/usr/bin/systemctl poweroff
Apr 16 10:02:55 carolfs-ifusp sudo[1127]: pam_unix(sudo:session): session opened for user root by carolfs(uid=0)
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c2 of user carolfs.
Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp org.gnome.evolution.dataserver.Sources3[591]: Received terminate signal.
Apr 16 10:02:55 carolfs-ifusp colord[453]: Automatic remove of icc-9cb50954c1872204852075bef0599dec from xrandr-Goldstar Company Ltd-W2043-16843009
Apr 16 10:02:55 carolfs-ifusp colord[453]: Profile removed: icc-9cb50954c1872204852075bef0599dec
Apr 16 10:02:55 carolfs-ifusp colord[453]: device removed: xrandr-Goldstar Company Ltd-W2043-16843009
Apr 16 10:02:55 carolfs-ifusp polkitd[358]: Unregistered Authentication Agent for unix-session:c2 (system bus name :1.37, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Apr 16 10:02:55 carolfs-ifusp ntpd[300]: ntpd exiting on signal 15
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c2 of user carolfs.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c1 of user gdm.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c1 of user gdm.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Sound Card.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Sound Card.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-systemd\x2dfsck.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-systemd\x2dfsck.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-getty.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-getty.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping User Manager for UID 1000...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Disk Manager...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Service...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Default.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Default.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Prompts.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Default.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Default.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Login Prompts.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping GNOME Display Manager...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Starting Generate shutdown-ramfs...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Locale Service.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Disk Manager.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Reached target Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Reached target Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Exit the Session...
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Exit the Session...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Network.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Network.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping dhcpcd on all interfaces...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Received SIGRTMIN+24 from PID 1159 (kill).
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Received SIGRTMIN+24 from PID 1160 (kill).
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 120.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 1000.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-1000.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-1000.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-120.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-120.slice.
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: sending signal TERM to pid 264
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: waiting for pid 264 to exit
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: received signal TERM from PID 1161, stopping
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: eno1: removing interface
Apr 16 10:02:55 carolfs-ifusp systemd[387]: pam_unix(systemd-user:session): session closed for user gdm
Apr 16 10:02:55 carolfs-ifusp systemd[568]: pam_unix(systemd-user:session): session closed for user carolfs
Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp gdm-session-worker[383]: <3>GLib: Source ID 71 was not found when attempting to remove it
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: AT Translated Set 2 keyboard: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Microsoft Microsoft Basic Optical Mouse : Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp org.freedesktop.Tracker1[591]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: sending signal TERM to pid 264
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: waiting for pid 264 to exit
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: exited
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Login Service.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: dhcpcd.service: main process exited, code=exited, status=1/FAILURE
Apr 16 10:02:55 carolfs-ifusp mkinitcpio[1145]: ==> Starting build: none
Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: -> Running build hook: [sd-shutdown]
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped dhcpcd on all interfaces.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unit dhcpcd.service entered failed state.
Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (II) NVIDIA(GPU-0): Deleting GPU-0
Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (EE) Server terminated successfully (0). Closing log file.
Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-password' with active job
Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-launch-environment' with active job
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped GNOME Display Manager.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Permit User Sessions...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Permit User Sessions.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Basic System.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Basic System.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Slices.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Slices.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping User and Session Slice.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Removed slice User and Session Slice.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Paths.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Paths.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Timers.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Timers.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily man-db cache update.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily man-db cache update.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily verification of password and group files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily verification of password and group files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily rotation of log files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily rotation of log files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Sockets.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Sockets.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Device-mapper event daemon FIFOs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed Device-mapper event daemon FIFOs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping LVM2 metadata daemon socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed LVM2 metadata daemon socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping D-Bus System Message Bus Socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed D-Bus System Message Bus Socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping System Initialization.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target System Initialization.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Apply Kernel Variables...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Apply Kernel Variables.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Setup Virtual Console...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Setup Virtual Console.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Encrypted Volumes.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Encrypted Volumes.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Load/Save Random Seed...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Update UTMP about System Boot/Shutdown...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remote File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Remote File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Load/Save Random Seed.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Update UTMP about System Boot/Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Create Volatile Files and Directories...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Create Volatile Files and Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000/gvfs...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/120...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /boot...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /home...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting Temporary Directory...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partuuid/748828e6-d06b-4dc9-a1ee-94e2bf6e2d41.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partlabel/swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/wwn-0x5000c500242cde85-part2.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/ata-ST3500418AS_5VM96G8V-part2.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-uuid/59c506eb-3a40-4eae-8048-317bcc3d00fb.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap Swap Partition.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000/gvfs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted Temporary Directory.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/120.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /boot.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping EFI System Partition Automount.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unset automount EFI System Partition Automount.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /home.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Unmount All Filesystems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Unmount All Filesystems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems (Pre).
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems (Pre).
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remount Root and Kernel File Systems...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Remount Root and Kernel File Systems.
Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: ==> Build complete.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Started Generate shutdown-ramfs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Final Step.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Final Step.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Power-Off...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Shutting down.
Apr 16 10:02:56 carolfs-ifusp systemd-shutdown[1]: Sending SIGTERM to remaining processes...
Apr 16 10:02:56 carolfs-ifusp systemd-journal[166]: Journal stopped
Last edited by CFS (2014-05-08 12:57:13)Thank you for your replies. Shutdown now doesn't turn the computer off either. About the type of system, I think it was custom built. This is a new install from Monday, so I didn't update the kernel. Poweroff, suspend and hibernate have never worked. The requested output:
$ uname -a
Linux carolfs-ifusp 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
$ pacman -Qi linux
Name : linux
Version : 3.14.1-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.14.1
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 71136.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Mon 14 Apr 2014 03:42:52 PM BRT
Install Date : Mon 14 Apr 2014 07:50:11 PM BRT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature -
System freeze after resume from suspend to RAM
Hi,
since quite a while (probably ever) I am unable to suspend my computer to RAM because everytime it freezes a few seconds after resuming, never to become alive again until a reboot. After some investigation, I managed to get kernel logs by taking a picture of my screen. The logs were not written to disk, hence I didn't see anything before. I had to write these by hand, I hope I didn't insert any mistakes:
kernel: sas: Enter sas_scsi_recover_host busy: 2 failed: 2
kernel: sas: trying to find task 0xfff880008b5b680
kernel: sas: sas_scsi_find_task: aborting task 0xfff880008b5b680
kernel: sas: sas_scsi_find_task: task 0xfff880008b5b680 is aborted
kernel: sas: sas_eh_handle_sas_errors: task 0xfff880008b5b680 is aborted
kernel: sas: trying to find task 0xffff8804606ccb40
kernel: sas: sas_scsi_find_task: aborting task 0xffff8804606ccb40
kernel: sas: sas_scsi_find_task: task 0xffff8804606ccb40 is aborted
kernel: sas: sas_eh_handle_sas_errors: task 0xffff8804606ccb40 is aborted
kernel: sas: ata7: end_device-0:0: cmd error handler
kernel: sas: ata8: end_device-0:1: cmd error handler
kernel: sas: ata7: end_device-0:0: dev error handler
kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
kernel: ata7.00: failed command: READ VERIFY SECTOR(S)
kernel: ata7.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
res 40/00:48:a0:79:88/00:00:07:00:00/40 Emask 0x4 (timeout)
kernel: ata7.00: status { DRDY }
kernel: ata7: hard resetting link
kernel: sas: ata8: end_device-0:1: dev error handler
kernel: ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
kernel: ata8.00: failed command: READ VERIFY SECTOR(S)
kernel: ata8.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
kernel: ata8.00: status { DRDY }
kernel: ata8: hard resetting link
This issue seems to be related to disk failures like bad sectors but I am quite sure, that my SSDs are in a good shape. I ran some SMART tests, they all turned out to be okay. Suspending from my dual-booted Windows works fine as well (although if the bad sector would be on the linux partition, it would probably not affect Windows).
Here's my setup:
$ lsblk -St
NAME HCTL TYPE VENDOR MODEL REV TRAN NAME ALIGNMENT MIN-IO OPT-IO PHY-SEC LOG-SEC ROTA SCHED RQ-SIZE RA WSAME
sda 1:0:0:0 disk ATA Corsair Force 3 2 sata sda 0 512 0 512 512 0 cfq 128 128 0B
sdb 7:0:0:0 disk ST1000DM 003-9YN162 NDP3 usb sdb 0 512 0 512 512 1 cfq 128 128 0B
sdc 0:0:0:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdc 0 512 0 512 512 0 cfq 128 128 0B
sdd 0:0:1:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdd 0 512 0 512 512 0 cfq 128 128 0B
sr0 2:0:0:0 rom TSSTcorp CDDVDW SH-222AL SB00 sata sr0 0 512 0 512 512 1 cfq 128 128 0B
$ lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs Recovery 567437B974379B27
├─sda2 vfat DC2D-099E /boot
├─sda3
├─sda4 ntfs FEBED982BED933BD
├─sda5 ext4 arch 41bad924-84a2-4e0a-9cd4-4ea723a2a5a3 /
└─sda6 swap 793fb3c1-8bec-4023-a7c3-ee94eee2e67a [SWAP]
sdb
└─sdb1 ntfs HDDRIVE2GO 2212E50812E4E231
sdc
└─sdc1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
└─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
sdd
└─sdd1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
└─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
I am not sure which one of the disks causes the freeze but I assume it's the revodrive because the logs talk about two drives. The Revodrive internally holds two drives, which are set up to operate in a RAID 0. Windows is installed on the Corsair drive, and has no access to the Revodrive. However, I used to run Windows on the Revodrive a few years ago, and it worked just fine.
Another interesting thing is that when I try to test suspend to RAM, the system does not freeze, nor produce errors. This only happens if none is written to /sys/power/pm_test (which means no automated wake-up, no testing).
Any ideas on how I could narrow down this issue? Thanks a lot!
EDIT
I just checked and confirmed that this issue is originating from the OCZ Revodrive:
$ dmesg | grep ata7.00 | head
[ 7.136432] ata7.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
[ 7.136436] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.146442] ata7.00: configured for UDMA/133
$ dmesg | grep ata8.00 | head
[ 7.310018] ata8.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
[ 7.310023] ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.320022] ata8.00: configured for UDMA/133
Last edited by tuttiarch (2015-01-31 15:54:29)Thank you for the link, unfortunally I don't have a NVIDIA card but use the Intel IGP (HD4600, Haswell) - maybe I should have mentioned that...
And other than in this bug report I cannot kill X or anything because neither other TTYs work - I cannot input anything (although the hotkeys work weird enough) nor is SSHD running because the system is completely frozen...
Very funny thing is that for the last 2 days my system didnt freeze once (suspended about 6-7 times during one boot), even though for the 2 weeks prior to that, it froze EVERY SINGLE TIME I resumed from suspend, it didnt work once... -
[SOLVED] Suspend to ram / disk not working in newer kernels
Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51) -
Systemd: Suspend and Hibernate not working
Hi,
When I try to hibernate my Notebook using systemd with 'systemctl hibernate', it sometimes (from time to time it even works) fails with the error message "a dependency job for hibernate.target failed". In the journal I see the following:
The system clock has been changed to REALTIME microseconds after January 1st, 1970.
Jun 04 23:52:57 localhost systemd[1]: systemd-hibernate.service: main process exited, code=exited, status=1/FAILURE
Jun 04 23:52:57 localhost systemd[1]: Failed to start Hibernate.
-- Subject: Unit systemd-hibernate.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit systemd-hibernate.service has failed.
-- The result is failed.
Jun 04 23:52:57 localhost systemd[1]: Dependency failed for Hibernate.
-- Subject: Unit hibernate.target has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit hibernate.target has failed.
-- The result is dependency.
Jun 04 23:52:57 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Jun 04 23:52:57 localhost systemd[1]: Unit systemd-hibernate.service entered failed state.
Jun 04 23:52:57 localhost systemd[1]: Stopping Sleep.
-- Subject: Unit sleep.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit sleep.target has begun shutting down.
Jun 04 23:52:57 localhost systemd[1]: Stopped target Sleep.
-- Subject: Unit sleep.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit sleep.target has finished shutting down.
:x
Any ideas? Furthermore, during hibernate (when it works) my screen first gets black, the system comes back and only then it really hibernates.
Others suggest switching to linux-lts. Does that really make sense? Isn't this a systemd issue?
suspend sometimes fails to work either (screen gets blank, but system weaks up after a few seconds again):
Jun 05 06:59:14 localhost systemd[1]: Stopping Sleep.
-- Subject: Unit sleep.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit sleep.target has begun shutting down.
Jun 05 06:59:14 localhost systemd[1]: Stopped target Sleep.
-- Subject: Unit sleep.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit sleep.target has finished shutting down.
Jun 05 06:59:14 localhost systemd[1]: Reached target Suspend.
-- Subject: Unit suspend.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit suspend.target has finished starting up.
-- The start-up result is done.
Thanks,
MichaelThanks, but I do not call systemd-sleep manually, I just do the ordinary "systemctl hibernate".
Unfortunately, the error "A dependency job for hibernate.target failed. See 'journalctl -xn' for details" just happened again. Alas, I'm not able to debug it according to the manual (https://wiki.archlinux.org/index.php/sy … emd_errors). When I try to get the log messages for the PID that causes hibernate.service to fail, I don't see anything suspicious in the logs:
$ sudo systemctl status systemd-hibernate.service
systemd-hibernate.service - Hibernate
Loaded: loaded (/usr/lib/systemd/system/systemd-hibernate.service; static)
Active: failed (Result: exit-code) since Fri 2014-06-13 14:32:52 CEST; 12min ago
Docs: man:systemd-suspend.service(8)
Process: 26712 ExecStart=/usr/lib/systemd/systemd-sleep hibernate (code=exited, status=1/FAILURE)
Main PID: 26712 (code=exited, status=1/FAILURE)
Jun 13 14:32:37 localhost systemd[1]: Starting Hibernate...
Jun 13 14:32:37 localhost systemd-sleep[26712]: Suspending system...
Jun 13 14:32:52 localhost systemd[1]: systemd-hibernate.service: main process exited, code=exited, status=1/FAILURE
Jun 13 14:32:52 localhost systemd[1]: Failed to start Hibernate.
Jun 13 14:32:52 localhost systemd[1]: Unit systemd-hibernate.service entered failed state.
$ sudo journalctl -b _PID=XXXX
-- Logs begin at Thu 2013-09-26 16:12:25 CEST, end at Fri 2014-06-13 14:43:40 CEST. --
Jun 13 14:32:37 localhost systemd-sleep[26712]: Suspending system...
Any ideas? -
Touchpad permanently not working after resuming from suspend
I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
In Linux, I can see the difference is kernel traces when the driver is loaded.
Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
Now : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home. When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
BTW, sorry I can't help... but at least I am entertained easily.
Maybe you are looking for
-
hello, i have a screen with a lot of drop down list boxes and input output fields. if i select from list from listboxes and press 'DISPLAY DETAILS' then i get the record with respect to the input from a database table(i have usd tab
-
Unable to view recent photos on my Mac in PSE 11 organizer
unable to view recent photos on my Mac in PSE 11 organizer ..I see them in Iphoto not organizer..Please help
-
Restrict records in CSV file based on condition
Greetings. I searched the forum for my issue and didn't find an answer or the right search terms. I am running APEX 4.1.1 I have a report on a page. I am showing all records for a given SQL statement in my table, but in the "Export to CSV" I need to
-
A CS4 file has two paragraph styles with the same name... Does this indicate a problem with the file?
-
Local storage slider wont move
running windows 8.1 on a brand new toshiba laptop. the local storage is maxed out on an application i am running and it wont allow me to increase.any suggestions would be appreciated