Suspends fails the first time, but succeeds the second time

Hi all,
I am running Arch Linux on my Dell XPS 15 9530 laptop, and overall I am very happy with the combination. I have however had some issues with suspending.
The problem is that the first time I try to suspend the machine it seems to go to sleep, but then two seconds later it automatically wakes up again. If I then immediately try again to suspend, it works (it does not wake up automatically). Does anyone know what could be going on, and how this can be fixed?
Usually I suspend from my gnome 3 desktop, but I have also tried to suspend directly using 'systemctl suspend' without having an X server running, and the result is exactly the same. I have tried a few versions of the vanilla kernel, but also the linux-lts and the linux-ck images, but to no avail.
Here is the output from dmesg, where suspend fails:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.543 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 334.544 msecs
PM: late suspend of devices complete after 0.201 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.944 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.424 msecs
PM: early resume of devices complete after 0.091 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
PM: resume of devices complete after 2769.054 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
and here where suspend succeeds:
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.412 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 780.265 msecs
PM: late suspend of devices complete after 0.387 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.988 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.411 msecs
PM: early resume of devices complete after 0.097 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
PM: resume of devices complete after 2801.389 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
systemd[1]: Requested transaction contradicts existing jobs: File exists
systemd[1]: Service sleep.target is not needed anymore. Stopping.
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
It seems to me like the only real difference has to do with the xhci_hcd errors, perhaps the following:
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
Any input or help would be highly appreciated.

Rexilion wrote:Maybe you could confirm your suspicion by rmmoding xhci before suspend and modprobing it after resume?
Thanks for the response. I should have said so, but I had already tried that, but without any luck. It seems like it doesn't change anything.

Similar Messages

C++ Call to DLL made in LabVIEW Fails the second time it is called

I have an application where a C++ executive calls a LabVIEW DLL (a LabVIEW application built into a DLL).
The executive calls and operates the DLL fine the first time (NT, the applications task manager shows LabVIEW runtime runs, then stops when the DLL is done. However, when the executive calls the DLL a second time, it hangs, and the runtime engine never shows up in the applications task manager as running.
However, this only occurs when something like IMAQ, DAQ, or another custom DLL call is occurring. We tried it with a simple DLL that only uses a call to the sound VIs, and it seems to run fine, although as the program called is very short, and the task manager slow, we never see the runtime engin
e in the task manager. We are going to put a popup dialog in to ensure that the DLL is being called reliably, but we believe it is.
We are unable to answer why when we call something that uses IMAQ, that the DLL doesn't run right the second time. We are unsure of the reasons, but believe it to be related to thread creation and destruction in the executive.
If anyone out there has any insight into this, we would be happy to see it.
We will be putting in a formal request for support from NI, but wanted to poll the audience as well, as we know from first hand experience that LabVIEW users often times have more experience with this sort of thing than developers.
Thanks a bunch

> Thanks for the information Greg. There is no documentation on this
> issue, except for the email that we got from NI Support. This is
> quite a new realm for us and NI alike. We would like to know what
> your experiences have been on this subject. If you have a bit of
> information, perhaps we should suggest a topic. As I said, this is a
> new frontier for LabVIEW, and there are a lot of things that NI
> doesn't know, and I'm sure a few of the programmers out there have
> figured out.
>
I often answer emails from home, but I work for NI on the LV development
team. So anything I know about, NI knows about. The info I was
describing about the DLL execution system is not well documented since
we were hoping that it would work we
ll with the way Windows Apps are
typically written. I suspect that we will need to write a Tech Note
to cover the nitty gritty. This sort of info gets lost in manuals,
and it is subject to change as we learn how people are expecting to
use it.
Anyway, my post was to explain why your use of it didn't work.
In general, we believe that LV DLLs are thread savvy, reentrant
VIs can be called from multiple threads simultaneously, execution can
continue in the background after the DLL call has returned, and the UI
is live provided the calling app processes messages in that thread.
If you have other issues or questions, just ask.
Greg McKaskle

SecureAMF channel failed for first time initialization

Hi all,
I have a Flex application to authenticate with server via RemoteObject.
It is working normally with http (i.e. amf channel)
However when I try to login via https, the first access time, Flex application always return Fault error. Subsequent login is OK.
From server side, I see user has been logged in successfully at first time.
Is it because the certificate is not trusted? Any idea?
Thank you,
Anh
This is the log that I have from client side:
LoginCommand Fault: (mx.rpc.events::FaultEvent)#0
bubbles = false
cancelable = true
currentTarget = (null)
eventPhase = 2
fault = (mx.rpc::Fault)#1
    content = (Object)#2
    errorID = 0
    faultCode = "Client.Error.MessageSend"
    faultDetail = "Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure'"
    faultString = "Send failed"
    message = "faultCode:Client.Error.MessageSend faultString:'Send failed' faultDetail:'Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure''"
    name = "Error"
    rootCause = (mx.messaging.events::ChannelFaultEvent)#3
      bubbles = false
      cancelable = false
      channel = (mx.messaging.channels::SecureAMFChannel)#4
        authenticated = false
        channelSets = (Array)#5
        connected = false
        connectTimeout = -1
        enableSmallMessages = true
        endpoint = "https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure"
        failoverURIs = (Array)#6
        id = (null)
        mpiEnabled = false
        netConnection = (flash.net::NetConnection)#7
          client = (mx.messaging.channels::SecureAMFChannel)#4
          connected = false
          objectEncoding = 3
          proxyType = "none"
          uri = "https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure"
        piggybackingEnabled = false
        polling = false
        pollingEnabled = true
        pollingInterval = 3000
        protocol = "https"
        reconnecting = false
        recordMessageSizes = false
        recordMessageTimes = false
        requestTimeout = -1
        uri = "https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure"
        url = "https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure"
        useSmallMessages = false
      channelId = (null)
      connected = false
      currentTarget = (mx.messaging.channels::SecureAMFChannel)#4
      eventPhase = 2
      faultCode = "Channel.Connect.Failed"
      faultDetail = "NetConnection.Call.Failed: HTTP: Failed: url: 'https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure'"
      faultString = "error"
      reconnecting = false
      rejected = false
      rootCause = (Object)#8
        code = "NetConnection.Call.Failed"
        description = "HTTP: Failed"
        details = "https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure"
        level = "error"
      target = (mx.messaging.channels::SecureAMFChannel)#4
      type = "channelFault"
headers = (null)
message = (mx.messaging.messages::ErrorMessage)#9
    body = (Object)#2
    clientId = (null)
    correlationId = "F4E42A7F-5E56-B704-CDB6-87826108D443"
    destination = ""
    extendedData = (null)
    faultCode = "Client.Error.MessageSend"
    faultDetail = "Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'https://172.52.22.218:9443/MyApplication/messagebroker/amfsecure'"
    faultString = "Send failed"
    headers = (Object)#10
    messageId = "B549C02F-9EDF-7C6E-C89F-878261572A73"
    rootCause = (mx.messaging.events::ChannelFaultEvent)#3
    timestamp = 0
    timeToLive = 0
messageId = "B549C02F-9EDF-7C6E-C89F-878261572A73"
statusCode = 0
target = (null)
token = (mx.rpc::AsyncToken)#11
    message = (mx.messaging.messages::RemotingMessage)#12
      body = (Array)#13
        [0] (com.mydomain.model.dto::LoginDTO)#14
          statuscode = "0"
          userName = "myusername"
      clientId = (null)
      destination = ""
      headers = (Object)#15
      messageId = "F4E42A7F-5E56-B704-CDB6-87826108D443"
      operation = "authenticate"
      source = (null)
      timestamp = 0
      timeToLive = 0
    responders = (Array)#16
      [0] (com.mydomain.controller::LoginCommand)#17
    result = (null)
type = "fault"

Hi Alex,
Thank you for your reply. It is true that I failed in IE 6, 7, 8 with amf-secure channel. Firefox and Google Chrome is working.
I have checked the services-config.xml (should be the default) and see the <add-no-cache-headers>false</add-no-cache-headers> in channel definition my-secure-amf:

        <channel-definition id="my-secure-amf" class="mx.messaging.channels.SecureAMFChannel">
            <endpoint url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/>
            <properties>
                
                <add-no-cache-headers>false</add-no-cache-headers>
            </properties>
        </channel-definition>
For my-amf, it is set to true

        <channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
            <properties>
                <polling-enabled>false</polling-enabled>
                <add-no-cache-headers>true</add-no-cache-headers>
                <invalidate-session-on-disconnect>true</invalidate-session-on-disconnect>
            </properties>
        </channel-definition>
Is there any other place I need to add the add-no-cache-headers?
I'm using Websphere application, do I need to set any properties in Websphere?
Thank you and look forward to your reply,
Anh

Calls disconnect on first try but works on second

Some of my calls disconnects first time(receiver can't listen my voice)
But the second call connects.and works fine
I don't understand why ?any one help please
Topic edited by Rickard

Sorry to hear that.
As alexdon says, this sounds like it could be network related. Have you been in contact with your operator about this? Does it happen both on GSM only and WCDMA only? You can select this under Settings -> More -> Mobile networks -> network mode.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Dual-track audio after export plays on first clip, but not on second?

So, I've been working on a project with video that has two audio tracks, and they play fine in the preview window in premiere, but as soon as I export them, the first clip of it works, but the second clip I have does not have the second audio track, just the first. If anyone could shed some light on whats going on that would be great. Also, I tried using media encoder, in which I couldn't hear either of the audio tracks.

Hi incinirate,
So, I've been working on a project with video that has two audio tracks, and they play fine in the preview window in premiere, but as soon as I export them, the first clip of it works, but the second clip I have does not have the second audio track, just the first. If anyone could shed some light on whats going on that would be great. Also, I tried using media encoder, in which I couldn't hear either of the audio tracks.
That's rather strange. Sorry to hear that.
Where did these files originate? From a video camera, screen capture, webcam, or mobile device? What is the format of these files? More details on your system, OS, version of Premiere Pro, etc., please.
Thanks,
Kevin

Suspend fails 50% of time on Linux 3.1.1, works on 3.0.4

Hi folks,
I upgraded yesterday from 3.0.4 to 3.1.1 and noticed that suspend wasn't working anymore as it used to. I began to investigate the problem and at it's core I believe that the cause is a buggy BIOS - the lid states are not correctly reported. To be precise, after resume, the lid state is:
$ cat /proc/acpi/button/lid/LID/state
state: closed
which is obviously invalid. The problem is described in detail already in a 2006 bug report on ubuntu bug tracker.
However, to my Toshiba Satellite U300, this didn't pose a big problem, because the Linux 3.0.4 always returned a lid close event, regardless of the lid state. However, in 3.1.1 it seems that a lid close event is not generated if the lid state is already closed. Thus when the lid is closed, no event is generated and the computer does not suspend. But when the lid is opened, a lid open event is generated (note: lid open is never generated when resuming from a suspend!) which corrects the lid state as open!
This means that to suspend the computer, the lid has to be closed every time twice. I know this problem affects other models too.. I seem to have an HP laptop in this household that's showing roughly the same symptoms.. lid needs to be closed twice. It's running Linux Mint though, and I haven't diagnosed the problem at all yet.
Here are the differences between 3.0.4 and 3.1.1 in acpi_listen
linux 3.1.1
$ acpi_listen
(CLOSE LID)
button/lid LID close
(OPEN LID - No lid event!)
battery PNP0C0A:00 00000081 00000001
processor LNXCPU:00 00000081 00000000
processor LNXCPU:01 00000081 00000000
ac_adapter ACPI0003:00 00000080 00000001
battery PNP0C0A:00 00000080 00000001
(CLOSE LID - No lid event, no suspend!)
(OPEN LID)
button/lid LID open
(CLOSE LID)
button/lid LID close
(OPEN LID - No lid event!)
battery PNP0C0A:00 00000081 00000001
processor LNXCPU:00 00000081 00000000
processor LNXCPU:01 00000081 00000000
ac_adapter ACPI0003:00 00000080 00000001
battery PNP0C0A:00 00000080 00000001
linux 3.0.4
$ acpi_listen
(CLOSE LID)
button/lid LID 00000080 00000003
(OPEN LID - No lid event!)
battery BAT1 00000081 00000001
processor CPU0 00000081 00000000
processor CPU1 00000081 00000000
ac_adapter ACAD 00000080 00000001
battery BAT1 00000080 00000001
(CLOSE LID)
button/lid LID 00000080 00000004
(OPEN LID)
battery BAT1 00000081 00000001
processor CPU0 00000081 00000000
processor CPU1 00000081 00000000
ac_adapter ACAD 00000080 00000001
battery BAT1 00000080 00000001
They both repeat the same pattern. Any gurus here got any advices/ways to deal with this situation? I suppose a DSDT fix would be in place.. it would be nice to catch the lid open event too! For now I'll be sticking with 3.0.4 for the sake of convenience.
Last edited by snaip (2011-11-18 09:39:14)

skunktrader wrote:Same problem here https://bbs.archlinux.org/viewtopic.php?id=130372 complete with a workaround
Thanks, but unfortunately not the same problem. In the above url the problem was about laptops suspending upon receiving a "lid open" event. I noticed that (my laptop was suspending when opening the lid..) and corrected it already before posting this thread.
I'll try to clarify, step by step. Here is what happens, from the point when computer is freshly rebooted and turned on.
Action - output of /proc/acpi/button/lid/LID/state - ACPI event generated - Result
1) Close the lid - state: closed - button/lid LID close - computer suspends
2) Open the lid - state: closed - no event - computer resumes, everything works great, but no lid open event.
3) Close the lid - state: closed - no event - Nothing happens
4) Open the lid - state: open - button/lid LID open - Lid open event.. state changes.
5) Close the lid - state: close - button/lid LID close - Computer suspends
6) Move to step 2
The only difference between 3.1.1 and 3.0.4 behaviour is that in 3.0.4 a LID close event is generated in step 3 (and thus the next step is step 2). The proc/acpi/button/lid/LID/state is always "closed". I've been browsing the kernel git, but haven't found at least so far what has caused it.
I'll try to pinpoint the exact version change where the problem occurs.
Last edited by snaip (2011-11-18 11:56:23)

Frame creation fails at first attempt but creates succcessfully later on

hi
i am trying to create frames from a movie using c#.I have converted javascript code to c#.But every time i attemp to create frames with a new movie,it fails to create frames in photoshop cs5.But it easily generates frames for the movie that have been used once in photoshop.I am unable to get any clue why it is working like this.plaese give some advice.

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IOS updates always fail on one Mac, but succeed on another

Hi,
unfortunately there is no general iOS subforum, so I post it here in the iPad forum in hope that someone has an idea.
Whenever I am trying to update one of my iDevices from my Mac Pro (10.6.4 and iTunes 9 or 10, both have the same problem) the update runs half way through and then gets stuck on the apple logo, progress bar at about half way through.
This is reproducable with any iDevice (tried iPhone 4, iPhone 3G and iPad).
If I plug the same devices into my Macbook Pro, the update (or then: restore) works without any glitches.
So it must be something with my Mac Pro, but I have no idea what might cause this.
Has anyone else experienced something like this before?
Thanks
Sascha

HI,
So it must be something with my Mac Pro
Boot from install disc, run Disk Utility in case the startup disk needs repairing and check for free disk space.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
Carolyn

Sync fails going Mac touch; but succeeds going MobileMe Mac/touch. Why?

The MacBook has all latest software/updates. Touch is at 3.0. I have about 756 names/nos. in my Addressbook. If I add an item to the Addressbook and then sync the Mac with the touch the new item does not appear. Nor does it appear in my MobileMe addressbook. I've tried all the variants I can think of short of blanking out the touch and reloading everything. Everything else (music, Calendars) appears to sync correctly. I've verified all of the settings on the Mac and touch.
Note however that when I add an item to the Addressbook on my MobileMe site the sync +works correctly+ and the item appears in the address books on my Mac and touch.
Why is this? And is there a fix?
Thank you everyone.

That's not cool. Mac used to be a fail safe company. Now it failed me. I have to spend more money to get my expensive IPod Touch to work with my Mac. Outstanding!!! What do I have to purchase to upgrade my Mac from 10.4.11 to a 10.5.8 or later?

Cant hear on first call but works on second call!

My wife and I both got Xperia Z1's at the start of November.
Recently my wife has been having a problem with her phone.
Nearly every time she calls me I cant hear her but she can hear me. If she hangs up and phones me back it works fine!
Anyone got any ideas why?

Its been happening for a few weeks now, only seems to be when she calls me although she doesnt really use the phone to call anybody else. We tried calling other numbers yesterday and it seemed ok and also worked ok when she called me! Maybe it has sorted itself out now

FRM-41213 message will come up the first time

When users run reports in Oracle Forms from time to time, particularly after the report server engine (InitEng=1, minEng=1, maxEng=2) has been idle for a while, the FRM-41213 message will come up the first time. Then, the second time (or after that) when users try to run reports again reports come up.
It looks like, after certain idle time, all existing report server engines are killed automatically. Then, the very first call to the report server at that time will usually fail because it has exceeded the time limit to ping the report server when it is actually trying to start an engine.
Is this an issue with the server configuration? If so, is there any way to correct it?
Thanks.
Andy

The OAS version is actually 10.1.2.3 - latest patches applied to 10.1.2.0.2. The issue is actually intermittent and usually happens when there is a cold call to the report server from RUN_REPORT_OBJECT in Forms. When the first call fails, the second time (or after that) when the same report is called will always succeed. However, this failure pattern is consistent. I also tried to use "trcrro1012" to generate some trace files and got the following. Thanks.
<pre>
[Thu Oct 22 08:45:43 PDT 2009] Calling RUN_REPORT_OBJECT with REPORT_SERVER=apprs
com.sun.corba.se.internal.iiop.ConnectionTable(Thread[main,5,main]): Client get called: host = 10.10.10.10 port = 4526
com.sun.corba.se.internal.iiop.ConnectionTable(Thread[main,5,main]): SocketException java.net.ConnectException: Connection refused: connect while creating socket for new connection
com.sun.corba.se.internal.iiop.ConnectionTable(Thread[main,5,main]): Serious error: aborting connection
[Thu Oct 22 08:45:53 PDT 2009] RUN_REPORT_OBJECT returned : apprs_0
ERROR TYPE : FRM
ERROR CODE : 41213
ERROR TEXT : Unable to connect to the Report server apprs.
</pre>
Here is the configuration file:
<pre>
<?xml version = '1.0' encoding = 'ISO-8859-1'?>
<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\product\midtr1012/reports/dtd/rwserverconf.dtd">
<server version="10.1.2.0.2">


<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="100"/>



</cache>
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="2" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000">


</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="2" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000"/>


<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">

</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">

</destination>


<job jobType="report" engineId="rwEng" retry="3"/>
<job jobType="rwurl" engineId="rwURLEng" retry="3"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>

<log option="noJob"/>


<trace traceMode="trace_append" traceOpts="trace_all"/>
<connection maxConnect="20" idleTimeOut="20">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>


<identifier confidential="yes" encrypted="yes">ZgZCDkywAUaHwMnb+A6YTg0RUH18p+JnK5e6PYJzMHahoaXuaMlHLsLimJoUJC7SgRkIKvxUWzcN+fnGpAgXqPbDwQIip3iy1IVDD28qcMq341JDJJwkp3UHBmgF9iaHE1QT5Ax+oDOlbJDRu8UsVvWdEEYE+/I/eo4Lke/II/28sEGlHFJbQ39gtjMB9ULQcKnUVc8mNUTEEE+VoCCzboSmVB1Tlmw1WXrs5IPPTkiNwb6FeN+wSWv19mxKLJgUHzw3QXcGIM2h5dtO7SPlo5agERVicAVt83fWwrd5/1r7BJD/gsUS5tgob91faIqoDU8INtNWdbGJxiQJGKon/lGAqjkSIHbPVWiNUgcB4gNQtFZwFQ8BU9qQCpolnki9zj8NmkRZpqTeMsEDrj2EbJhrFg6UEnrxrgKy1vCYf0bhPyZks/mY94nW4tSekTnqUW5gFVgUe0Ms0WiPx0o=</identifier>
<pluginParam name="mailServer">dphhub01.sfgov.org</pluginParam>

<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
</pre>

ITunes wont start the second time

Hi, I posted this problem before but probably because my subject title was a little wide nobody looked at it..
This is my problem, I download iTunes install it everything works fine but after I close itunes or my computer when I want to start iTunes again it wont start???

I have the exact same problem. I use Windows Vista SP1.
iTunes.exe does show up in the task manager, but there is no way I can access it, because it doesn't show up.
I had this problem since I installed the update to iTunes 8. I tried several times to completely uninstall it an reinstall it. Everytime it worked the first time, but failed the second time. Then I uninstalled agan and reinstalled iTunes 7. Same thing, worked first time, failed since then.
Does anyone have an idea what the problem is ? There is no error message.
Thanks in advance!

I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.

Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah

Suspend command only works the first time

I'm seeing a strange issue with my machine. If I suspend the system by using either:
systemctl suspend
or
dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
the system will suspend the first time, but then if I try to suspend again, it doesn't suspend completely. The screen goes black and my external hd shuts down, but the box doesn't shutdown. It stays running.
Could anyone offer some suggestions on what to check?
I checked the systemd journal and I don't see any errors that stand out as being the problem.
Last edited by Gumper (2013-03-03 13:28:56)

I've got a similar error. When trying to suspend via systemctl the machine goes down.
The screen goes blank and I can hear my harddrives spinning down but before they go completely silent, the system comes back up again.
Fully working as if I never even wanted to suspend. I'm pretty sure my drives don't like that a lot.
The first time after a boot works however, as mentioned by Gumper.
systemctl reports this:
A dependency job for suspend.target failed. See 'journalctl -xn' for details.
But I can't see anything related in the journal.
This is my second suspend problem now. I already have trouble waking up from suspension on my notebook:
https://bbs.archlinux.org/viewtopic.php … 5#p1238615
This new problem now is on my x64 desktop machine if that helps. Of course this happens on the same day I clean my pkg cache
Last edited by Orim (2013-03-03 22:56:03)

Time machine would back up only the first time after I shut off my imac and started it up again. Then it would fail or claim it could not locate my external Hard Drive even though it's icon was showing in the time machine dialog window.

Time machine only ever backed up the first time it runs immediately after I start up my computer after it has been shut off. All other back up attemps fail. Recently it stopped recognizing the icon for my external hard drive in the time machine dialog window where you select the hard drive to back up to, and turn on and off the time machine function. Now the external HD icon only shows up on the desk top but no longer in the dialog box. I just tried shutting the computer off and turning it on again and now the light is on, on the external hard drive but the icon does not even appear on the desk top.
The external hard drive is a 1TB Seagate. The drive still has plenty of unused capacity. I ran a diagnostic test on it. It said the disk needed repair but the repair function would not work. The message stated that it could not be unmounted and repair is not available because the disk can't be written to. The Mac OX utility said the disk can still be opened but can't be changed nor repaired. The external HD is not S.M.A.R.T. supported.
I haven't tried replacing the cable yet. Is that the next thing I should try?

What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

Suspends fails the first time, but succeeds the second time

Similar Messages

Maybe you are looking for