Frame creation fails at first attempt but creates succcessfully later on

hi
i am trying to create frames from a movie using c#.I have converted javascript code to c#.But every time i attemp to create frames with a new movie,it fails to create frames in photoshop cs5.But it easily generates frames for the movie that have been used once in photoshop.I am unable to get any clue why it is working like this.plaese give some advice.

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Gnome login fails at first attempt

Hi guys,
I'm having a strange problem here.
When I boot my notebook and try to login into Gnome, it constantly fails at the first attempt.
So I click on my username, enter the (correct) password and nothing happens. I cancle it with 'esc', click on the username again, enter the password and I'm in.
This also occurs when I lock my screen.
Any ideas why Gnome tries to troll me and how to fix it?
Thanks.
Specs:
Macbook pro 5,5
GDM 3.10.0.1
GNOME Shell 3.10.4
Any more information needed? Let me know.

I did a checkup von /var/log/gdm/:0.log but didn't find anything that might give me an hint
Here is the output of the logfile
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH x86_64
Current Operating System: Linux antartica 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95744744-5122-437b-82a7-6eb85b3a6448 rw quiet
Build Date: 09 January 2014 08:47:24AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 24 17:11:42 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(--) PCI:*(0:2:0:0) 10de:0863:106b:00b9 rev 177, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(++) using VT number 1
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(WW) Unresolved symbol: fbGetGCPrivateKey
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling 2D acceleration
(II) NVIDIA(0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(0): Vision stereo.
(II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
(II) NVIDIA(0): NVIDIA GPU GeForce 9400M (C79) at PCI:2:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 62.79.67.00.00
(--) NVIDIA(0): Valid display device(s) on GeForce 9400M at PCI:2:0:0
(--) NVIDIA(0): Apple Color LCD (DFP-0) (boot, connected)
(--) NVIDIA(0): DFP-1
(--) NVIDIA(0): DFP-2
(--) NVIDIA(0): Apple Color LCD (DFP-0): Internal Single Link LVDS
(--) NVIDIA(0): Apple Color LCD (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-1: Internal Single Link TMDS
(--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-2: Internal DisplayPort
(--) NVIDIA(0): DFP-2: 480.0 MHz maximum pixel clock
(**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) NVIDIA(0): device Apple Color LCD (DFP-0) (Using EDID frequencies has
(**) NVIDIA(0): been enabled on all display devices.)
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated MetaModes:
(II) NVIDIA(0): "DFP-0:nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (112, 112); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
Loading extension NV-CONTROL
Loading extension XINERAMA
(II) NVIDIA(0): [DRI2] Setup complete
(II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
(--) RandR disabled
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 2.8.2
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) evdev: Sleep Button: Device: "/dev/input/event2"
(--) evdev: Sleep Button: Vendor 0 Product 0x3
(--) evdev: Sleep Button: Found keys
(II) evdev: Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
setversion 1.4 failed: Permission denied
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
removing GPU device /sys/devices/pci0000:00/0000:00:03.5/drm/card1 /dev/dri/card1
(II) config/udev: Adding drm device (/dev/dri/card1)
(II) xfree86: Adding drm device (/dev/dri/card1)
removing GPU device /sys/devices/pci0000:00/0000:00:03.5/drm/card1 /dev/dri/card1
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: removing device Power Button
(II) evdev: Power Button: Close
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(II) config/udev: removing device Sleep Button
(II) evdev: Sleep Button: Close
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) evdev: Sleep Button: Device: "/dev/input/event2"
(--) evdev: Sleep Button: Vendor 0 Product 0x3
(--) evdev: Sleep Button: Found keys
(II) evdev: Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
(II) config/udev: removing device Power Button
(II) evdev: Power Button: Close
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
removing GPU device /sys/devices/pci0000:00/0000:00:10.0/0000:02:00.0/drm/card0 /dev/dri/card0
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
setversion 1.4 failed: Permission denied
(II) config/udev: Adding input device applesmc (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Apple Computer, Inc. IR Receiver (/dev/input/event8)
(**) Apple Computer, Inc. IR Receiver: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Apple Computer, Inc. IR Receiver'
(**) Apple Computer, Inc. IR Receiver: always reports core events
(**) evdev: Apple Computer, Inc. IR Receiver: Device: "/dev/input/event8"
(--) evdev: Apple Computer, Inc. IR Receiver: Vendor 0x5ac Product 0x8242
(--) evdev: Apple Computer, Inc. IR Receiver: Found keys
(II) evdev: Apple Computer, Inc. IR Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple Computer, Inc. IR Receiver" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device applesmc (/dev/input/js0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Built-in iSight (/dev/input/event6)
(**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Built-in iSight'
(**) Built-in iSight: always reports core events
(**) evdev: Built-in iSight: Device: "/dev/input/event6"
(--) evdev: Built-in iSight: Vendor 0x5ac Product 0x8507
(--) evdev: Built-in iSight: Found keys
(II) evdev: Built-in iSight: Configuring as keyboard
(II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 10)
(II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event10)
(**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
(**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
(**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10"
(--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x237
(--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
(II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 11)
(II) config/udev: Adding input device bcm5974 (/dev/input/event9)
(**) bcm5974: Applying InputClass "evdev touchpad catchall"
(**) bcm5974: Applying InputClass "Multitouch Touchpad"
(**) bcm5974: Applying InputClass "touchpad catchall"
(**) bcm5974: Applying InputClass "Default clickpad buttons"
(**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.7.4
(II) Using input driver 'synaptics' for 'bcm5974'
(**) bcm5974: always reports core events
(II) synaptics: bcm5974: found clickpad property
(--) synaptics: bcm5974: x-axis range -4460 - 5166 (res 0)
(--) synaptics: bcm5974: y-axis range -75 - 6700 (res 0)
(--) synaptics: bcm5974: pressure range 0 - 256
(--) synaptics: bcm5974: finger width range 0 - 16
(--) synaptics: bcm5974: buttons: left double triple
(--) synaptics: bcm5974: Vendor 0x5ac Product 0x237
(--) synaptics: bcm5974: touchpad found
(**) bcm5974: always reports core events
(II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 12)
(**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
(**) synaptics: bcm5974: (accel) AccelFactor is now 0.017
(**) bcm5974: (accel) keeping acceleration scheme 1
(**) bcm5974: (accel) acceleration profile 1
(**) bcm5974: (accel) acceleration factor: 2.000
(**) bcm5974: (accel) acceleration threshold: 4
(--) synaptics: bcm5974: touchpad found
(II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
(**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server

Workspace page doesn't render on the first attempt, but on the second

We have a clustered environment where users log into the Big IP load balancer. Local users are able to access the Workspace URL without a problem from within the company. Users out of state and out of the country are not able to connect successfully on the first attempt about 85% of the time, but are able to on the second attempt after killing their browser session. Their session just hangs without rendering the login screen on the first attempt. They are usually able to log in without a problem the rest of that day. We have performed some tests and asked a few users to bypass the load balancer and hit the servers directly, and they have a better success rate of receiving the log in screen.
I am a local user and this is also an issue when trying to connect remotely to the Workspace page. It eventually times out and I receive the following message:
"_execScript::Error loading file './js/com/hyperion/bpm/web/common/format/Format.js' Error The operation was timed out".
Has anyone ever experienced this issue? I would appreciate any suggestions. Thanks!

Hello L Swarz,
Thank you for the details of the issue you are experiencing when downloading your purchased song to your iPod nano.
I am not sure if you have tried these specific steps, but I recommend downloading the purchased song to iTunes on your computer using the steps in the following article:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thank you for using Apple Support Communities.
Best,
Sheila M.

Suspends fails the first time, but succeeds the second time

Hi all,
I am running Arch Linux on my Dell XPS 15 9530 laptop, and overall I am very happy with the combination. I have however had some issues with suspending.
The problem is that the first time I try to suspend the machine it seems to go to sleep, but then two seconds later it automatically wakes up again. If I then immediately try again to suspend, it works (it does not wake up automatically). Does anyone know what could be going on, and how this can be fixed?
Usually I suspend from my gnome 3 desktop, but I have also tried to suspend directly using 'systemctl suspend' without having an X server running, and the result is exactly the same. I have tried a few versions of the vanilla kernel, but also the linux-lts and the linux-ck images, but to no avail.
Here is the output from dmesg, where suspend fails:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.543 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 334.544 msecs
PM: late suspend of devices complete after 0.201 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.944 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.424 msecs
PM: early resume of devices complete after 0.091 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
PM: resume of devices complete after 2769.054 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
and here where suspend succeeds:
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.412 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 780.265 msecs
PM: late suspend of devices complete after 0.387 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.988 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.411 msecs
PM: early resume of devices complete after 0.097 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
PM: resume of devices complete after 2801.389 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
systemd[1]: Requested transaction contradicts existing jobs: File exists
systemd[1]: Service sleep.target is not needed anymore. Stopping.
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
It seems to me like the only real difference has to do with the xhci_hcd errors, perhaps the following:
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
Any input or help would be highly appreciated.

Rexilion wrote:Maybe you could confirm your suspicion by rmmoding xhci before suspend and modprobing it after resume?
Thanks for the response. I should have said so, but I had already tried that, but without any luck. It seems like it doesn't change anything.

T440p, WIndows 7: Fingerprint Reader Fails on First Attempt to Log In, Works on Second After Delay

I have a T440p with Windows 7 Pro. Except on rare occasions, I am unable to log into Windows with my first swipe across the fingerprint reader. The green light is on when I do the first swipe and it immediately goes off and stays off for around 15 sesconds, during which time another swipe does nothing. Then the green light will return and a second finger swipe will log me on.
Any suggestions on fixing this would be appreciated. It's made using the fingerprint reader for login impractical, because it's faster to just go to the password screen and log in that way. Thanks.
Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
Thinkpad X120e
Thinkpad T61p
Solved!
Go to Solution.

I do see a several second delay before the fingerprint reader green light comes on after the login screen appears, but it's no where near as long as the delay I was previously seeing between the first failed swipe and waiting for the light to come on again. The new driver is a great improvement and make the fingerprint reader work as I recall when I first purchased the T440p--though possibly a bit slower to light up after the login screen appears. It would be great to see the fingerprint reader light come on more quickly after the login screen appears, but that's a minor thing compared to the failure on the first swipe.
Thanks again for giving us the opportunity to try this driver out. So far, after a day of use and several times coming out of sleep, I haven't had any failed swipes.
Skoop wrote:
sog, some feedback on that driver:
The installer runs but doesn't give any prompt that it has finished. I was waiting for something to show, after the progress bars, but it just quits. Before I restarted, I checked the driver version and saw the new one, so I figured that was all that was going to happen. Driver is v.285, dated 1/29/15.
Restarted the PC and then put it to sleep (deep sleep mode/Intel Rapid Start). First swipe does indeed work to login thereafter.
But: It takes longer for the FP reader light to come on now. I think it's that same 15 seconds mentioned above. With the previous driver, the scanner light would come on almost right away with the login screen, but the first swipe wouldn't do anything. Once the light came on again--that period of seconds, the swipe would work.
With this new driver version, I think that what's changed is that the light simply doesn't come on until whatever is going on in the background has completed. So, in effect, getting a desktop takes the same amount of time, but with only a single swipe. --Which isn't a complaint that a login should be able to be effected more quickly with the FP scanner. Perhaps it can't. Just reporting how it works now.
journeyman, your take?
Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
Thinkpad X120e
Thinkpad T61p

Import files fails on first attempt

Hi,
I have a plugin which pulls files from a certain folder for import.
The first time my plugin tries to import a file i get this error
But subsequent calls to the same document succeed and adobe acrobat imports it correctly. Do you know what might be going on, is it some sort of timing issue?

When you click "Insert Files" I override the Open Dialog if it is for this feature. I then create an ASPath array with my files and load the files before sending the result back in *outASPathName...
The timing error occurs in the following scenario
1. Click Insert Files
2. Select Files and click Insert
3. The default Insert Files dialog appears with my files loaded
4. If i click this within a few seconds it throws the above error
4a. If i want about 5 seconds and click it works

Web Service Call Fails on First Attempt

Hi,
I am calling a .Net web service from Flex and I am getting
unexpected results on the first call. The function accepts a few
parameters and returns an integer. I currently have it coded to
return 1, 2, or 3, but it always returns 0 on the first call. All
subsequent calls return expected results. Is this a Flex bug, or am
I missing something?
Thanks!

Hello.
Last month, I've made an reply to the topic just the same to
yours.
Please see:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=585&threadid=1257326#45 61856
I'm not sure this problem is a bug or not, but in my
situation, this problem has been happened since I updated Flex
Builder....

My first attempt to create livecd using Archiso

I just want to start by saying that I have searched the forum
I managed to create a archlinux liveiso consisting of archlinux core Xorg and fluxbox following the archiso article in the wiki.
However I have one issue though when I run /arch/setup it only installs the base and base-devel packages not everything am I doing something wrong as I would like to install the whole contents of the cd.
any assistance will be appreciated.
Cheers

Hi Svenstaro I had a look at the wiki after you have updated it, that's how I found that the Grub part has been taken out here is my Makefile
#### Change these settings to modify how this ISO is built.
# The directory that you'll be using for the actual build process.
WORKDIR=work
# A list of packages to install, either space separated in a string or line separated in a file. Can include groups.
PACKAGES="$(shell cat packages.list syslinux)"
# The name of our ISO. Does not specify the architecture!
NAME=my-arch
# Version will be appended to the ISO.
VER=1.00
# Kernel version. You'll need this.
KVER=2.6.32-ARCH
# Architecture will also be appended to the ISO name.
ARCH?=$(shell uname -m)
# Current working directory
PWD:=$(shell pwd)
# This is going to be the full name the final iso/img will carry
FULLNAME="$(PWD)"/$(NAME)-$(VER)-$(ARCH)
# Default make instruction to build everything.
all: my-arch
# The following will first run the base-fs routine before creating the final iso image.
my-arch: base-fs
mkarchiso -p syslinux iso "$(WORKDIR)" "$(FULLNAME)".iso
# This is the main rule for make the working filesystem. It will run routines from left to right.
# Thus, root-image is called first and syslinux is called last.
base-fs: root-image boot-files initcpio overlay iso-mounts syslinux
# The root-image routine is always executed first.
# It only downloads and installs all packages into the $WORKDIR, giving you a basic system to use as a base.
root-image: "$(WORKDIR)"/root-image/.arch-chroot
"$(WORKDIR)"/root-image/.arch-chroot:
root-image:
mkarchiso -p $(PACKAGES) create "$(WORKDIR)"
# Rule for make /boot
boot-files: root-image
cp -r "$(WORKDIR)"/root-image/boot "$(WORKDIR)"/iso/
cp -r boot-files/* "$(WORKDIR)"/iso/boot/
# Rules for initcpio images
initcpio: "$(WORKDIR)"/iso/boot/archiso.img
"$(WORKDIR)"/iso/boot/archiso.img: mkinitcpio.conf "$(WORKDIR)"/root-image/.arch-chroot
mkdir -p "$(WORKDIR)"/iso/boot
mkinitcpio -c ./mkinitcpio.conf -b "$(WORKDIR)"/root-image -k $(KVER) -g $@
# See: Overlay
overlay:
mkdir -p "$(WORKDIR)"/overlay/etc/pacman.d
cp -r overlay "$(WORKDIR)"/
wget -O "$(WORKDIR)"/overlay/etc/pacman.d/mirrorlist http://www.archlinux.org/mirrorlist/$(ARCH)/all/
sed -i "s/#Server/Server/g" "$(WORKDIR)"/overlay/etc/pacman.d/mirrorlist
# Rule to process isomounts file.
iso-mounts: "$(WORKDIR)"/isomounts
"$(WORKDIR)"/isomounts: isomounts root-image
sed "s|@ARCH@|$(ARCH)|g" isomounts > $@
# This routine is always executed just before generating the actual image.
syslinux: root-image
mkdir -p $(WORKDIR)/iso/boot/isolinux
cp $(WORKDIR)/root-image/usr/lib/syslinux/*.c32 $(WORKDIR)/iso/boot/isolinux/
cp $(WORKDIR)/root-image/usr/lib/syslinux/isolinux.bin $(WORKDIR)/iso/boot/isolinux/
# In case "make clean" is called, the following routine gets rid of all files created by this Makefile.
clean:
rm -rf "$(WORKDIR)" "$(FULLNAME)".img "$(FULLNAME)".iso
.PHONY: all my-arch
.PHONY: base-fs
.PHONY: root-image boot-files initcpio overlay iso-mounts
.PHONY: syslinux
.PHONY: clean
Last edited by sakrhass (2010-01-16 08:24:22)

I have been trying to get my daughter's iPod Facetime to work. But when we log on it won't let us. When we put in our ID and password it attempts to verify but fails and when we have create a new account and had confirmation email it still wont verify???

I have been trying to get my daughter's iPod Facetime to work. But when we log on it won't let us. When we put in our ID and password it attempts to verify but fails and when we have create a new account and had confirmation email back it still wont verify???

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

ESXi 6 fails/becomes unresponsive when attempting to create Datastore on OCZ SSD

I am trying to bring a Mac Mini 5,3 online with vSphere 6. The system originally came with two 500GB 7.2kRPM drives, and I swapped one with a brand new OCZ ARC100-25SAT3-480G SSD. I am booting from a SanDisk 64GB USB plugged into the back.
I brought the system online, added it to my vCenter, created a new datastore using the remaining 7200RPM drive, and all was well up to that point. As soon as I attempt to create a new datastore on the OCZ drive, the host becomes unresponsive to either vCenter or the old thick client. At the console I am still able to log in and look at the logs but that is about it, and it will even hang if I attempt a restart from the console so I have to manually power cycle it. If I leave it running, after a very long time (more than 10 minutes) the thick client will eventually throw the following useless error:
Call "HostDatastoreSystem.CreateVmfsDatastore" for object "ha-datastoresystem" on ESXi "octo" failed.
So I tried using partedUtil to remove partitions and do it again, with no change as soon as I tried to create the datastore (UI becomes unresponsive). Then I booted the machine using an external drive with OS X 10.10.3 on it and tried partitioning the drive MBR/FAT32, wrote and read a few files to make sure the drive actually seemed to work, and booted it back on on vSphere 6. When I attempted to create a Datastore again, I still got the same behavior.
After a reboot, this is what partedUtil reports for the disk:
partedUtil get /dev/disks/t10.ATA_____OCZ2DARC100______________________________A22L2061437000076___
58369 255 63 937703088
1 2048 937697984 0 0

Doesn't work, in fact ESXi seems to just hate this disk. Since my original post, I've tried a few more things.
First, I tried to use both partedUtil and disk to delete the partition on the drive. This does not work.
partedUtil delete /vmfs/devices/disks/t10.ATA_____OCZ2DARC100______________________________A22L2061437000076___ 1
Error: Read-only file system during write on /dev/disks/t10.ATA_____OCZ2DARC100______________________________A22L2061437000076___
Unable to delete partition 1 from device /vmfs/devices/disks/t10.ATA_____OCZ2DARC100______________________________A22L2061437000076___
So I yanked the drive out, which is not trivial on a Mac Mini, and attached it to a windows box, then used diskpart to run the clean command on it. I stuck back in the Mac Mini and had the same freezing and uselessness. So I thought I'd try a different system. I have an older SuperMicro X8SIL system in the rack that was easy to pop the top off of and hot insert the drive after another round using clean with diskpart. After refreshing the storage controllers, the X8SIL machine saw it, so I told it to try to partition the device, and I got the exact same behavior. Since this machine has a disk activity light, I can see that the disk light is pegged on.

Spatial index creation fails in oracle9i but works in 8i

Hi--
i'm using oracle9.0.1.2.0 and arcSDE on solaris 8
when i create a spatial feature table and index oracle gives me the foloowing error:
Extended error code(29855): ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13236: internal error in R-tree processing: [failed to cluster in memory]
ORA-13249: Internal error in Spatial index: [mdrcrclmem]
ORA-13232: failed to allocate memory during R-tree creation
ORA-13249: Error in Rtree: [mdrcrrdtbl, select /*+ PARALLEL 4 */ rid , min_d1, max_d1 , min_d2, max_d2 from (select rownum rnum, rid , m(MDSYS.SPATIAL_INDEX)
this occurs whether i use cov2sde at the command line or Create Index in sqlplus:
SQL> create index COUNTY_IDX on COUNTY_SDO(shape)
2 indextype is mdsys.spatial_index
3 parameters ('SDO_INDX_DIMS=2 tablespace=sde2_idx');
create index COUNTY_IDX on COUNTY_SDO(shape)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13249: Stmt-Execute Failure: SELECT count(*) from SDE.COUNTY_SDO
ORA-29400: data cartridge error
ORA-01116: error in opening database file 14
ORA-01110: data file 14: '/u04/oradata/GIS2/sde3_idx01.dbf'
ORA-27041: unable to open file
SVR4 Error: 24: Too many open files
Additional information: 3
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 7
ORA-06512: at line 1
the bizarre thing is that everything works tickety-boo in oracle 8i *8.1.7.3)
has anyone run across this?
cheers
--kassim

thanks for the suggestion, but that didnt work either
i increased the file descriptor limit from 256 to 2048 (my sysadmin sez that could break lots of things in solaris and had another go:
elvis{1}% ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 8192
coredump(blocks) unlimited
nofiles(descriptors) 2048
vmemory(kbytes) unlimited
lvis{2}% cov2sde -o create -l plstrfill_sdo,shape -f $GISDATA/survey.ws/plstr_fill,poly -e a -R 1 -k spatial -a file=$GISDATA/survey.ws/plstr_fields.txt -g SPIDX_RTREE
ArcSDE 8.2 Build 115 Wed Mar 6 09:48:27 PST 2002
Coverage to Layer Loading Administration Utility
Reading column selection file "/data/jack02/in_put/survey.ws/plstr_fields.txt"
Library /data/jack02/in_put/survey not found.
Unable to open library "/data/jack02/in_put/survey"
Loading feature class/subclass "poly"
from Coverage "/data/jack02/in_put/survey.ws/plstr_fill"
sde_layer_plstrfill_sdo: plstrfill_sdo is in LOADONLY mode
Imported 158399 features into SDE plstrfill_sdo,shape from coverage /data/jack02/in_put/survey.ws/plstr_fill,poly
SDE Error(-51) Underlying DBMS error
Extended error code(29855): ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13230: failed to create temporary table [M2_8496$$] during R-tree creation
ORA-13249: Error in stmt: CREATE TABLE M2_8496$$ NOLOGGING tablespace SDE_IDX STORAGE (initial 4096K next 4096K pctincrease 0 maxextents unlimited) as (select rid , min_d1, max_d1 , min_d2, max_d2 from M0_8496$$ a, (select (min_d2+max_d2) value fro(MDSYS.SPATIAL_INDEX)
Not able to set layer into Normal-IO mode.
Cov2SDE completed.
No libraries currently set.
SQL> create index plstrfill_idx on plstrfill_sdo(shape)
2 indextype is mdsys.spatial_index
3 parameters ('SDO_INDX_DIMS=2 tablespace=sde4_idx');
create index plstrfill_idx on plstrfill_sdo(shape)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13230: failed to create temporary table [M2_84A5$$] during R-tree creation
ORA-13249: Error in stmt: CREATE TABLE M2_84A5$$ NOLOGGING tablespace SDE4_IDX
STORAGE (initial 4096K next 4096K pctincrease 0 maxextents unlimited) as
(select rid , min_d1, max_d1 , min_d2, max_d2 from M0_84A5$$ a, (select
(min_d2+max_d2) value from M0_84A5$$ where rowid='AAAISqAAPAAACCYABK') b where
(((a.min_d2+a.max_d2) < b.value) or (((a.min_d2+a.max_d2) = b.value) and (a.rid
<= 'AAAISeAAJAAAnvnAASZ'))))
ORA-13230: failed to create temporary table [M2_84A5$$] during R-tree creation
ORA-29400: data cartridge error
ORA-00210: cannot open the specified controlfile
ORA-00202: controlfile: '/u01/oradata/GIS2/control01.ctl'
ORA-27041: unable to open file
SVR4 Error: 24: Too many open files
Additional information: 3
ORA-06512: at "MDSYS.SDO_INDEX_METH
this is really killing me
my oracle is setup following the esri and oracle guidelines:
all our tablespaces are with UNLIMITED extent and maxsize on
any files. All the tablespaces follow Oracle9i best practices
such as OFA, SAFE, and SAME including Temporary Tablespace.
any suggestions would be realy helpful
--kassim

Siebel webclient: An attempt to create a registry key has failed

Hi,
I am trying to install siebel webclient on my PC. but i am getting an error "An attempt to create a registry key has failed" and after this, the installer has uninstalled the files.
I have succesfully installed the same around 1 year ago. But uninstalled after that. Now i am trying to install again.
I believe the uninstaller has not cleaned the Registry properly.
Can any one help me to fix this problem?
Thanks,
Umesh

And if you have to include type, it might be better to use a switch statement:
Foreach ($RegVal in $RegGroup.Group) {
Switch ($RegVal.Type) {
"String" {Set-RegString $RegVal.Value $RegVal.Data}
"Dword" {Set-RegDword $RegVal.Value $RegVal.Data} <etc>
I hope this post has helped!

Y processing succeding in the second attempt but not in the first attetmpt

hi all,
i am getting a strange problem....
i have modelled a idocxijdbc scenario....
but when i am releasing the idoc from the /3 system...in the RWM i see two entries for my messaage....
the first entry alwasy fails...and after few seconds xi itself is attempting to process the message...and in this second attempt it is automatically succeding.....
the same is happening with every idoc that i release from the sap system....
i am confused...i dont understand what xi doing..
the error message for the first attempt is changing every time...
some times it says cache refresh problem...
some time it says queue stopped
some times it says http initial error (ICM_HTTP_INTERNAL_ERROR)..
can any one explain me what exactly happening....if any one can give me their mail id i can send the screen shots as well...
i am unable to understand if its my configuration problem...or system problem
please tell me whats wrong with this system...

hi venu,
i checked my cache this time immediately after i fired an idoc from the tcode SXI_CACHE..and it says that the cache contents are up-to-date..
i have one more problem....in RWB when i click on the details button..it says
Service cannot be reached
What has happened?
URL http://hwsapxi:50000/sap/bc/gui/sap/its/webgui/! call was terminated because the corresponding service is not available.
because of this i am not able to c the details of the message....how do rectify this problem..
thanx
pavan

Why is my Apple ID being locked out every time I go to use it? I haven't even attempted to log in for about 4 or 5 days, but today on my first attempt to do so, it said my account had been locked for security reasons. This is the third time.

I only sign in to iTunes' store about once a week or so. But during each of my last 3 attempts (on different days, several days apart) on my first attempt to enter my password and hit submit, I am immediately told that my Apple account has been locked for security reasons and it wants to take me to a page to reset my 'forgotten' password. I am using the CORRECT password.
Perhaps someone else is trying to break into my account or is mis-entering theirs but my account should not be getting locked like this. It is very frustrating to have to go through the reset password procedure each and every time I want to go into the store. It seems to me that Apple really doesn't want me to buy any more apps from them as they keep refusing me entry into my own account, each and every time I have tried to use it, for the past few weeks. I am not their best customer, but they aren't giving me much of a welcome invitation to become one, if I'm going to be treated like this.
I just bought my iPhone 4 less than 2 months ago. I paid extra money to upgrade early, just to get this phone because it was so highly recommended by everyone I spoke with in different stores (BestBuy and Verizon). I even bought the 2 year upgrade to my Apple services in case I needed to ever call them, and so far I haven't had to, yet. But I definitely will call them if this isn't straightened out.
It looks like this other user could be tracked and an email could be sent to them from Apple to let them know what they are doing - trying to sign into the wrong account, and are locking somebody else out of their own account because of their error....and to remind them of their correct information or how to get it and to write it down or save it somewhere so they don't keep on doing this.
I have seen literally DOZENS of other people in these discussions with exactly the same issue that I'm having so it is NOT an isolated incident, and it seems to be a growing problem as Apple's sales and user base continues to grow, so this problem is seriously needing to be addressed in some way, and soon, before they start losing new customers because of it. If I was still within my original 14 day return period with this phone, I would definitely be returning it and buying an Android model because of how frustrating this is to me. If my bank was doing this to me, I'd have already switched banks by now if they hadn't fixed it - just to give an example of how I feel about this.

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage

I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage
The movie had gotten to the point that I could watch it all the way through but it still said processing and got stuck at that point and when I turned off the wifi to try to restart it, it deleted its-self but did not free up any of the storage It was taking up
Restarting my iPad does not help
Some thing similar also happened to my old laptop when trying to download the iOS 5 update to my laptop when it came out. It kept getting disconnected and every time it would try to start over and act like what had already been downloaded was not there though it was still taking up the storage space.
And it continued repeating until it took up all of my storage space. The data file would not show up anywhere so I had to restore my laptop to the factory settings and that worked for awhile but I eventually had to get a new laptop.

Did you try to set it up as new device, as explained in this article?
How to erase your iOS device and then set it up as a new device or restore it from backups
If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
Use iTunes to restore your iOS device to factory settings - Apple Support

Frame creation fails at first attempt but creates succcessfully later on

Similar Messages

Maybe you are looking for