Swap failed and now hanging

I executed a swap froma staging to a production slot. The first tiem I executed I got this in the logs:
Description:
WebSite xxx(staging) has an operation Swap and the status is Failed
Details:
Source site name:: xxx(staging)
Target slot name:: production
ErrorMessage:
Internal Server Error
HttpStatusCode:
500
RequestId:
g-51fe516d-e833-41ea-b9f3-608068c2f5f8
I have no idea what went wrong there, but these operation seems to be hanging because when I retry the operation I get the following in the logs:
Description:
WebSite xxx(staging) has an operation Swap and the status is Failed
Details:
Source site name:: xxx(staging)
Target slot name:: production
ErrorMessage:
Conflict
Detail: Cannot modify this site because another operation is in progress. Details: Id: 77b8ab3f-6d8f-426a-bbc4-3b2a655dc24a, OperationName: SwapSiteSlots, CreatedTime: 3/17/2015 3:46:15 PM, WebSystemName: websites, SubscriptionName: 2d3fcce5-bf5b-4a34-9d7b-88a1aa42c1ad, WebspaceName: westeuropewebspace, SiteName: xxx, SlotName: staging, ServerFarmName:
ExtendedCode: 04026
HttpStatusCode:
409
RequestId:
g-6df957b6-f47c-4979-a7a3-017ae8a0f484
I can't swap my slots anymore. Does anyone have an idea what might be the issue and how to solve it?
Kenneth Truyers http://www.kenneth-truyers.net

Hi Kenneth,
there was an issue today in West Europe region which caused it the site swap failure. I've marked the operation as failed for now.
Since the issue in West Europe is mitigated it should be safe to retry swap.
Regards
Galin Iliev [MCSD.NET, MCPD], http://www.galcho.com

Similar Messages

Installing IOS 5.1.1 on my iPhone failed and now is not recognized by PC or itunes. All troubleshooting has failed. HELP!!!

Installing IOS 5.1.1 on my iphone failed and now the phone will not show up on itunes and is not recognized by my PC. I tried all troubleshooting Apple says to do minus uninstalling itunes. My wifes iphone still works fine with the same cable and itunes on my PC. ----- Help!

Hello. I was like this yesterday after upgrading 5.1.1. The proccess failed and the iphone only showed the USB cable with the iTunes logo.
What I did was connect the iphone to my wife's PC, and there, with a clean itunes installation, install a clean 5.1.1. Then, went back to my iMac and connect it again, and now it works.
But now, with my iphone working as new, it still cannot be showed up in itunes. I am still working on it.
Good luck!

My update failed and now my phone is frozen with the apple symbol

I was updating my iPhone and it failed and now my phone is frozen with the Apple Icon. It wont turn off or anything

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail and Contacts do not work anymore. I can still use Safari, Firefox and iPhoto etc. How do I get it fix I can still use Safari, Firefox and ed again?

I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail (crashes) and Contacts do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Updating MUSE failed, and now its gone

I am a subscriber to the Creative Cloud. I was opening MUSE and got an update notice, so I accepted the update. The update failed, and now MUSE is gone. The Adobe Applications Manager shows that it is installed, but the MUSE program folder is empty. How can I download and install it again?

Check your Add or Remove Programs system control panel and uninstall it from there.
Mylenium

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am I destined to be a nonuser for three months until I can upgrade. This is very unacceptable as I've been a Verizon Wireless customer for probably 20 yrs!

As a 20 year customer of ours, we certainly appreciate your loyalty Richey_Rich. I know the importance of ensuring you have a properly operating phone. Can you please clarify which button on the device is not working? Is there any physical or water damage to your phone? Any applications that stay running?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Updating my iPod Touch failed and now the screen is permanently lit with a white Apple logo above what appeares to be a download indicator bar. Now totally unresponsive and non-detectable by iTunes or my PC!

Hi, Can anyone help. Updating my iPod via iTunes failed and now shows a permanently lit screeen witrh a white apple logo above what appears to be an empty download bar indicator.
Neither iTunes or my PC will recognise or detect it wehen commected to the USB port.
All iPod buttons are responsive, including diagnostics mode (Menu+Sleep buttons).
Any ideas/suggestions?

Hi IIIaass
That's sorted it, thanks.
I don't think I actually managed to get it into DFU mode, although not too sure what that is, but following Karthik's advice and although not quite getting the response from my iPod, as it suggested, it eventually came up with the USB piccy and iTunes icon. From there on everything fell into place and it is currently Synching with iTunes after having done a restore.
Bravo !!

I have bought an iphone 3gs on ebay it worked with my sim but had last users pics numbers ect, so i restored it butb its failed and now all i get is connect to i tunes but will not restore ????

i have bought an iphone 3gs on ebay it worked with my sim but had last users pics numbers ect, so i restored it butb its failed and now all i get is connect to i tunes but will not restore ????

Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.

I was downloading Mavericks. Internet failed and now can't resume

I was downloading Mavericks. Internet failed and now can't resume.
I´ve tried several times and it says "OS X Mavericks failed to download"/Use the purchase page to try again. I went to purchase page but is impossible to resume.
Could you help me please?

Whatever you do, DO NOT REFORMAT THE DRIVE. You can just get a small <500Gb EXTERNAL bus powered drive, dismantle it and follow the instructions above. If you already have one then that's even better.
The drive I'm showing here is the drive that used to be inside of my computer. It took apart an old 320Gb seagate drive. The connections on these drives are all universally interchangeable. They just add some circuits and a USB (or other) interface. I would just get the cheapest drive that you can get that is for laptops and looks simple to take apart. (This is almost exactly the drive that I did this too http://www.amazon.com/Seagate-FreeAgent-Portable-External-ST903203FAA2E1-RK/dp/B 001FWIE0K/ref=sr_1_56?ie=UTF8&qid=1343340447&sr=8-56&keywords=seagate+external+h ard+drive)
The "old internal" drive should still be able to allow you to install ML on the "new" drive as long as you tell it to. It sounds complicated, but it's really not once you get in there and start doing it. It was actually quite easy.

Firefox restore session tool failed and now I cannot restore my sessions.

At first Firefox sort of hang, so I turned it off and on again. It opened withtout any previous tabs among which I had few failed to restore pages filled with links ( I have option to always restore previous session checked). Now - nothing. Blank page. I cannot find restoresession.js nor .bak files.
I d really really like to be able to restore these sessions.

thank you John but how can I uninstall it? Because after restore an old
systempoint i is not installed?
Am 17.08.2014 um 17:05 schrieb John T Smith:
>
i had to restore my windows and now i cannot reinstall my
creative cloud desktop
created by John T Smith <https://forums.adobe.com/people/JohnTSmith>
in /Adobe Creative Cloud/ - View the full discussion
<https://forums.adobe.com/message/6648052#6648052>

Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
iTunes no longer recognizes my airport express.
Error Message:
None of the selected updates could be installed.
An unexpected error occurred.
Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
Any sugestions?

I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

I tried to update to the most recent itunes, but the update failed and now when I try to open itunes a dialog box pops up and tells me that it can.t open because MSVCR80.dll is missing. I need help!

I tried to update to the most recent version of itunes but the update failed. Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing. I tried uninstalling and reinstalling itunes but I grt the same message. What can I do to fix this?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Update pushed from Adobe for Acrobat X failed and now the "print to a PDF" option is missing. How do I get it back?

Adobe pushed a security update to my computer and the update failed. Now the "print to PDF" option is missing from all of my programs. How do I get it back?
Version X.1.12.

Thanks. That's exactly what I did, but from the Adobe help screen. It did the trick, but I'm not very happy with Adobe for messing up my system.
I appreciate your answering back.

Restore failed and now my 64gb ipod touch wont turn on at all i tried so much stuff! help!

Please help my Ipod touch 64gb 3rd gen failed to restore and now its stuck off! I can't turn it on at all i tried so much stuff and it won't just turn on. I keep trying but it stays off, no apple sign or ipod to itunes screen. Please help i need this for school! its iOS is at 3.1.3 at the moment and itunes said it can be updated to 5.1.1 so i tryed to update and thats when this all happened! please please help! Also when i plug into computer doesnt appear on itunes.

Try:
- Try another cable.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HP laptop update failed, and now it wont stop undoing changes.

When I went on my laptop today it started updating, and after an hour when it finally got to 99% it said they the update failed, and it's now undoing changes. It's been like that for over 3 hours now. How can I try to fix this?

You can try getting to Advance Boot Menu by
1. Repeatly pressing f8when the laptop boot up (Disable FASTBOOT when you are tyring to get into Advance boot menu)
2.Shift and F8 (When the first options doesn't help at all )
then use the Keyboard arrow keys to navigate around Advance boot menu and select Last known good boot configration or restore this PC (Please be minded that if you choose restoring it will restore to a back to the last known backup , as data will be lost )
Please update here if there is still any problems

Swap failed and now hanging

Similar Messages

Maybe you are looking for