Swf can't find custom classes after publishing....

Hi everyone,
So this is probably an easy thing I don't know, I'm hoping.
But when I publish my project and test it in a normal HTML, the swf can find some classes but not others for some reason?
How can I make sure all the classes get compiled into the Swf?
I got the main timeline calling the first class (CalypsoPlayer); and it finds this class find -- which is under the same class path.
But CalypsoPlayer can't find the class it needs, even though it's under the same class path as the class.
I've tested the project in Flash itself and it all works great without any errors so I'm not sure what's going on. It's only when I test
the published SWF that it can't find all the classes it needs.
I appreciate anyones help -- Stan

Hey Dan,
My mind just stopped for an hour and I wasn't thinking straight on this issue, lol. I thought I deleted this posting but apparently
I didn't.
Thanks for your help but this issue was just a result of a mind that had too much coffee and not enough energy .
- Stan

Similar Messages

I can't find me dvd after windows7 instaling on hp pavilion dv2700.i can't run any dvd or cd.

I can't find the dvd after windows 7 installing,onhp pavilion dv2700. can't run any dvd.

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are not able to Boot into the Operating System on your Notebook.
We will surely assist you with this.
Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
is in a working condition or not, If yes you can easily recover/restore your Notebook
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

CAN NOT FIND MAIN CLASS

Why after i have unzipped and edited the classes in the jar file and zipped them together again, it gives me the message "CAN NOT FIND MAIN CLASS"?
This is after i have edited any class in the .jar zip.I did not edit the Manifest text file,can someone who has experienced this problem show me how to overcome it.
Thank you.

i think you have to read the "java tutorial on Jar files".
i guess after you have exracted the .jar file then you've edited the ".class"(i dont know how you did it) but i think you mean ".java" you should create another .jar file to be able to reflect the changes you have made, then set the main-class attribute of the newly created .jar file.

Can't find home drive after reinstallation of O.S.X

Dear friends,
I have one ibook G4 and a Macbook Pro. Two days ago, the ibook G4 failed to start up, I tried in safe mode then pass through. Then I run Onyx-automation followed by restart, after that neither my desktop nor the sidebar of the finder window show the home drive icons,( I partitioned the internal hard disk into two drives). But when I run Disk utility and found both are there correctly, including the files and capacity, usage etc. it tested both drives "appears OK". Yesterday, I tried to reinstall O.S.X Tiger 10.4 without removing previous system via a firewire to my Macbook Pro which installed with Leopard( the disc drive of my ibookG4 corrupted last year).
finally, the hard drives are still invisible, I did tick the display options for hard disks from the preference panel of Finder. To the worse, the same problem happened to my Macbook Pro after I restarted it.
It seems a simply software issue, physically the hard disks are ok through the disk verify and permission verify.
Headache! Please advise ASAP.
thank you,
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 6:58 PM in response to: cjunxing
Reply Email
what happens when you enter commandshiftc in finder? that should show all the drives. if it doesn't, maybe the drive has acquired the hidden flag. run the following command in terminal
sudo chflags 0 /
you'll have to enter your admin password which you won't see as you type it. that's normal. see if the drive shows up.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 7:11 PM in response to: V.K.
Reply Email
dear V.K.
When I enter commandshiftc in finder, it only shows up "network", then I followed to input sudo chflags 0 / in terminal and password, but the drives still not show up.
is there any other options to try out?
many many thanks
Junxing
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:01 PM in response to: cjunxing
Reply Email
run the following command in terminal and post the results. this will list permissions flags and acls on the startup drive.
ls -ladeO /
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:03 PM in response to: V.K.
Reply Email
I run the command as follows.
Last login: Tue Nov 3 11:04:49 on ttys000
cjunxing:~ junxingchen$ ls -ladeO /
drwxrwxr-t 38 root admin - 1360 Aug 11 10:25 /
cjunxing:~ junxingchen$
pls advise
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:34 PM in response to: cjunxing
Reply Email
these permissions look fine. sorry, i don't know what the problem is or why the drive would not show in finder. does it happen on all accounts? make a new one and check from there.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 1:11 AM in response to: V.K.
Reply Email
hi, V.K.
after running the two commands, suddenly, The Macintosh HD icon showed up at both desktop and sidebar in finder, but the other drive (I partition into two parts) still not showing. Then I open Onyx and tick the "unhidden those hidden files", I found that drive. So I conclude it was hidden by sth. But I don't know how to unhidden it, the icon always in grey.
Can you please instruct again.
thank you.
Junxing
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 6:41 AM in response to: cjunxing
Reply Email
aha, so it was a hidden flag after all. then run
sudo chflags 0 /volumes/*
you may need to restart after that to make the second drive show up.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 5:33 PM in response to: V.K.
Reply Email
Dear V.K,
I run the command at my Macbook Pro, my second drive show up. So exceited! However, when I tried with my ibook G4, neither drives come out, is there any difference in the commands between Tiger and leopard. just now, I check the hidden files with Onyx, both drives are there.
Pls guide me.
thanks
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 6:46 PM in response to: cjunxing
Reply Email
sorry, I haven't dealt with Tiger in such a long time I don't remember if it respects chflags. ask on Tiger forums.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz

I don't have a source attribute for this (maybe I wrote it myself!):
There are visibility toggling instructions at [this web site|http://www.pinkmutant.com/articles/invisible.html] using Terminal or Applescript.
If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.

Can't find main class - program will end

Dear forum readers,
Recently upgraded from Win2k pro to XP pro .. installation ran to conclusion w/ no fatal errors BUT upon booting new system I now receive an error message "Java Virtual Machine Launcher can't find main class, program will end" .. I am not aware that this error is causing any problems BUT it is annoying and I'd like to be able to fix the problem so I don't have to close the error message at each startup .. please help!
Thanks in advance, Larry

Try this
java -XbootClasspath/a -jar <<Prog name>>
I think you are trying in windows XP.
Also you need to modify if there are any other jars to be reference. For eg if a.jar is also required for this try as below
java -XbootClasspath/a:a.jar -jar <<Prog name>>

Can't find textbox class - help please!

I'm posting this again, in the hope that more people might help. I already know that the error means that the compiler can't find the class Textbox. I need to know why, because I've copied the relevant parts of the code from another app that builds fine. So why won't this build?
I'm trying to write and build my first J2ME app. My code starts:
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
import java.lang.Math;
public class TestMIDlet
extends MIDlet
implements CommandListener
private Textbox tbMain;
public void startApp()
The build fails with numerous errors of which the first is:
C:\WTK22\apps\TestMIDlet\src\TestMIDlet.java:9: cannot find symbol
symbol : class Textbox
location: class TestMIDlet
private Textbox tbMain;
with the caret under the 'T' of Textbox
I don't understand what's wrong with this, as it's in many of the sample apps I've looked at.
Thanks
Ed

Thanks very much!
I've lost count of the times I've been caught by that case-sensitivity thing in Javascript. I thought it was just the first letter that had to be capitalised. Progress at last!

My JSP can't find a class file

Hi
I am trying to view a JSP but I get ClassNotFoundException. I know that it means that it can't find the class but I can't understand why.
my directory structure:
Intranet->source
->jsp
->WEB-INF->classes->source-><class file here>
first line of .java file:
package source;
JSP code:
<%@page import="java.sql.*, source.*, java.util.*;" %>
<jsp:useBean id="dbConnect" scope="session" class="source.DBConnect">
<jsp:getProperty name="dbConnect" property="jdbc:odbc:Auto_Intranet" />
</jsp:useBean>
Must I create an environment variable for 'Windows': with classpath " .....\WEB-INF\classes"
The Windows environment variable doesn't exist----using XP Pro

Looks right to me.
You don't need a classpath variable. Web containers ignore it anyway.
Which class is not found? source.DBConnect?
Is DBConnect in a package called source?
Is your database driver in the web-inf/lib directory?
Please post the full error message with stack trace - it will be easier to sort out.
Good luck,
evnafets

Which Table, can I find the class and characteristic assigned to equipment.

Hi all,
I have assigned a characteristc to a class.
And assigned this class to an equipment.
Now in which table can i find the class assigned to this equipment.
What is the logic to find the class and characteristic.
Thanks in advance.
Piyush

Hi,
As per above post, you can find classes. To find characteristics, Give EQUNR value in OBJEK field in AUSP table & get the ATINN value.
Give ATINN value in ATINN field in CABN table & get ATNAM field value.
In AUSP table, you can get the values against each characteristics as well.
Regards,
Maheswaran.
Edited by: Maheswaran.K on Apr 19, 2011 9:28 AM

I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

Here to help shed some additional light on this case, jdondr. I also own a Maxx. With your phone, if you access the Gallery, there should be a folder named: Messaging. If you look at the upper left hand corner, you should see a drop down box. Is it currently set to Albums?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Installing 10g on Windows XP machine JVM launcher "Can't find main class"

I am trying to install 10g Release 2 on a Windows XP machine. I downloaded the zip from the OTN. Unzipped the file. No problems. Tried to run the OUI, it opened up a shell and said to wait. The shell closed and a message frome the JVM Launcher displayed "Can't find main class. Program will exit." I have seen several people on this and other discussion boards having this problem, but have yet to get a solution. Please help.

What's the value of CLASSPATH environment variable? Possibly a non-oracle application has set this variable and the installer catches it. If there is such a variable, comment it out and try again.

Spotlight can't find custom label

spotlight can't find custom labels and also custom labels, could someone know solution? IOS8.1, iphone 6

And just to be on the safe side, this thread did not solve my problem. Briefly, it's not about Spotlight getting mixed up because of external HDs.
https://discussions.apple.com/message/12289978#12289978

How can I find Custom Sapscirpts

How can I find custom Sapscripts in my existing system
regards
AJ

AJ,
Z* in SE71 and SMARTFORMS.You can also check the table TNAPR as well as TTXFP to know the print programs of the respective forms.
K.Kiran.

Can't find my notes after updating to OSX10.9

Can't find my Notes after updating to OSX10.9.
Notes appears blank when open it. Help says they should have transferred from Mail, but they haven't.
Any tips on how to get them back?

make sure you have itunes 11.1 installed

Can't find Java Class of a standard UI Command

Hello everybody,
Where can i find Java classe source and Bundle file of a standard UI Command "AppDetails"
for example ?
Thanks & Regards,
Hassan Mounim

Hi Hassan,
You can find the UIDetailsCommand class here:
..\WEB_INF\portal\portalapps\com.sap.km.cm.ui.flex\private\lib\km.appl.ui.flex.uicommand_core.jar
And the bundle file UIConst here:
..\WEB_INF\portal\portalapps\com.sap.km.cm.ui.flex\lib\km.shared.ui.flex.uicommand_api.jar
Hope this helps,
Robert

Time Machine can't find external drive after installing Lion

Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

Does the drive work when just directly connected? If so, have you prepped the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Swf can't find custom classes after publishing....

Similar Messages

Maybe you are looking for