Switch between BPF with different enviroment

Hi experts,
I'm oN BPC for MS SP 11 with epm add-in for big vol SP 18
I have two BPF: one related to ICMATCHING enviroment and one related to FINANCIALS enviroment.
I open a report from ICMATCHING BPF , I leave Excel open, then I open a report from FINANCIALS BPF : now the second report show wrong results because the active connection is ICMACTHING !. Both reports use evdre to retrieve data
A workaround could be close Excel every switch between BPF related to different enviroments but customer doesn't like it.
Any help appreciated
Thanks
Samuele

Hi Samuele,
You can disconnect conflicting connections that have been open in the seame Excel session by clicking the button marked in yellow.
/Cecilia

Similar Messages

Distributed File System Replication between servers with different performance

If Distributed File System Replication is set between servers with different performance. What will happen with the performance of the fastest server? Will the performance decrease to match the performance of the
slowest server in the chain? I mean, will the source slow down (processor speed) if the recipients can't keep up?

Hi,
If you mix different performance server for DFS replication, most of improvements on the fastest server are disabled for backwards compatibility and the performance decrease to match the performance of the slowest server.
For more detailed information, please refer to the article below:
Tuning replication performance in DFSR (especially on Win2008 R2)
http://blogs.technet.com/b/askds/archive/2010/03/31/tuning-replication-performance-in-dfsr-especially-on-win2008-r2.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

VMM 2012 sp1: unable to create a logical switch on team with different nics (bug?)

Hyper-V Host is HP Proliant G7 with 4 onboard nics and additional (different) 4-port adapter, all 1Gbit. Server 2012 with latest updates.
VMM 2012 is sp1 with latest updates, server 2012 running in a vm.
When I create a logical switch with teamed uplink port profile in VMM, the job builds the team but fails to create the vswitch when ports from both onboard nics and adapter is used.
I am able to create a vswitch manually on the team if I do it directly on the host.
If the team is created on either purely onboard nics or purely adapter nics, the logical switch creation succeeds.
In short terms: I am able to create a vswitch based on a server 2012 team with different nics, but not a logical switch. Why?

I have tried assigning both nics in one step, and one by one. When I create the logical switch team with only one nic it succeeds, but then fails when I add the second (unless it is similar to the first).
Error in VMM is
Error (2912)
An internal error has occurred trying to contact the dkfuzhv01.mia.local server: : .
WinRM: URL: [http://dkfuzhv01.mia.local:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/scvmm/ErrorInfo?ID=1010]
Unknown error (0x80041001)
Recommended Action
Check that WS-Management service is installed and running on server dkfuzhv01.mia.local. For more information use the command "winrm helpmsg hresult". If dkfuzhv01.mia.local is a host/library/update server or a PXE server role then ensure that
VMM agent is installed and running.
If I add the second non-similar team member from the host itself, I get this error from nic teaming wizard
Validation failed and changes to the system are rolled back
It is not a question of losing connection (been there), management interface is on a different team. And it also fails when second team member is added directly on the host...
So far I will stick to the conclusion that my problem is with logical switch and different nics :)
Oh, by the way nics are HP NC382i (Broadcom) and NC365T (Intel)

Find space between word with different endings and digit

Hi,
I'm trying to figure out how to find spaces between word and digit.
I am limited to use only word 'WORD' (either capital or small caps) with different endings like -ing -s -y and more (using \S+).
I wrote something like (?i)(?<=WORD\S+)\s(?=\d+) but this does not seem to work due to some limitation of lookahead I belive?
Any suggestions?
Peter

Peter Stnsz wrote:
… find what: (\<WORD\S+)(\s)(?=\d)
change to: $1~s
Hmmh?
Your Grep do not find your first example: WORD 0,2 (WORD without any ending)
And you don't need the second ()
And please do not use \S
Use this instead:
(\<WORD\l*)\s(?=\d)
(l is the little L)
Have fun

How to upgrade AND move between platforms with different Endians...?

Hi, all,
I have two databases - one of 500Gb and one of 50Gb - that are currently running on 10.2.0.4 on AIX 64-bit. They are Production systems.
I have to move them to a brand new Linux (RHEL 5.6 - 64-bit) server that will be running 11.2.0.2.
For test, I'm OK with this being done with Data Pump. But for the eventual move to 'New Prod', this will result in hours' worth of downtime and it's a business-critical system, so I'm trying to mitigate that as much as I can.
I was, naively, hoping to use RMAN to both move the databases from one box to the other, but also to upgrade them. I figure I would do the following (as per Metalink 369644.1) as I have a Recovery Catalog, etc, etc:
Install the binaries on the New Prod server
Connect to the RCAT and restore the database and recovery to a PiT
Manually upgrade the database by putting the DB into STARTUP UPGRADE and running the catupgrd.sql
Unfortunately, I didn't realise the Endian was different between AIX and RHEL (as per 1079563.1). Oops.
It doesn't look like I'll be able to use Transportable Tablespaces (as per 243304.1) either without first having to migrate the data across as a 10g DB and then upgrading.
So my options appear to be:
a) Data Pump and suck the outage up
b) Move the data using Transportable Tablespaces to 10.2.0.4 and then upgrade to 11.2.0.2.
Are there any other options? I have hopes that a logical standby would work in this instance a la rolling upgrade, but suspect that the different O/S AND the different Endian would scupper that idea...
Mark

Perhaps, I have more experience using concurrent exports/imports using the traditional exp/imp utility than using the parallel option on expdp/impdp. One thing you can do with exp/imp that you cannot do with expdp/impdp is export into a named pipe, start a remove copy of the named pipe to the new server, and then start importing from the named pipe on the new server so that you are importing while still exporting the same objects. We use tables= exports when we did this back when the tables= parameter could only handle 99 tables. We had a separate export for every large table and then a set of exports for 99 tables for each of the other tasks ran 6 to 12 concurrent processes.
One thing to look at is historic data. Potentially some tables can be moved in advance of the majority of the application objects and replaced with synonym to remote objects.
Truely static tables could also potentially be moved in advance even if only a day or two before to reduce the number of objects to be moved.
Build the new database in noarchive log mode to save some processing and switch it over and immediately back it up when you migrate.
And Yes, if the two platforms appear in the view name I gave you then you can use transportable tablespaces with the rman conversion step. Instructions for using rman to do the conversion are in the rman manual.
HTH -- Mark D Powell --

Is there any way to switch between using two different phones?

I know when phones have SIM cards (like with ATT), you can use two different phones by simply moving the SIM card from one phone to the other and ATT is none the wiser.
Is there any way to do that sort of thing with Verizon?
I currently have an iPhone 5 but would like to start playing around with Android (I'm a gadget nut). So, assuming I find an unlocked Android phone, is there any way to bounce back and forth between using different phones (obviously only one at a time)?

Michael_F wrote:
So, the SIM card contains all the info necessary for the new phone to ring when called, etc?
yes, assuming the phones use the same size SIM card (otherwise, you'll need an adapter or a new SIM card; the cards are free at your local Corporate Verizon store).
4G SIM Information | Verizon Wireless

Compatibility between MII with different patch levels.

Hi all,
I know that the best solution is to have the same MII patch level in MII development environment and in produztion enviroment.
For many reasons that aren't under my direct controli, we'll have an MII 12.0.5 in development and MII 12.0.8 in production.
Are there any point to verify? Can we export from development environment and deploy to production without any changes?
On the contrary, what about having the development environment at a higher patch level than production enviroment (e.g 12.0.8 in development and deploy the solution on a 12.0.5 prduction enviroment)?
Thank in advance for your responses/experiences on this subject.
Best wishes for a nice 2010

Hi,
If you transfer from lower patches to higher patches there will not be any problem as such.
In the otherhand if you trying to export the project from higher to lower patch there you have the problem. Becuase some bugs might have been fixed in the higher patch those are not avaialble in the lower. For example in some date function of BLS might have been fixed in updated patch,the same you copied then that particulr function will not work in the lower patch and the BLS will come with errors.
Hope this helps you.
-Suresh
Edited by: Suresh Hiremath on Jan 7, 2010 12:11 PM

Can I copy between systems with different R/3 releases/add-ons?

hi,all
help me!

Notes 19574 and 24853 provide basic information about this. The main or basic release must always be identical. Support Packages and add-ons should also have the same status in both systems. Only then can the consistency of the data be guaranteed.
For instance, if an add-on is only installed in the source system, the remote copy will terminate with a reference to differences in the dictionary or missing tables in the analysis phase, and will not make the copy. The remote copy terminates if not all data can be copied, in other words if, for instance, a field is missing in the target system, a field is too small or a complete table is missing. You can include individual tables and, from Release WAS 6.10, also development packages (formerly development classes) in the source system in an exception list, to avoid the termination. See note 557132 for further information.
The export does not experience this problem with the transport because the target system is not checked during the export. On the other hand, differences in the dictionary or missing tables are subsequently reported as errors during the import but this does not result in any termination. All of the data that can be imported is imported. In this respect, different ADD-ONs would not pose a problem for the client transport. to what extent is the data consistent or useable?

Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

Can I show two angles at the same time in the final edit rather than alternate with Multicam?

Stack two clips on top of each other and reduce the sizes. I think that's what you want.

NLS settings for a database link between DBs with different character sets

I am using a database link to move data from one database to another and I am seeing some strange data problems. The databases have different character sets and different NLS settings. I wonder if this could be causing my problem.
Here are the NLS parameters for the database where the database link exists. (the SOURCE database)
1     NLS_CALENDAR     GREGORIAN
2     NLS_CHARACTERSET     WE8MSWIN1252
3     NLS_COMP     BINARY
4     NLS_CURRENCY     $
5     NLS_DATE_FORMAT     DD-MON-RR
6     NLS_DATE_LANGUAGE     AMERICAN
7     NLS_DUAL_CURRENCY     $
8     NLS_ISO_CURRENCY     AMERICA
9     NLS_LANGUAGE     AMERICAN
10     NLS_LENGTH_SEMANTICS     BYTE
11     NLS_NCHAR_CHARACTERSET     AL16UTF16
12     NLS_NCHAR_CONV_EXCP     FALSE
13     NLS_NUMERIC_CHARACTERS     .,
14     NLS_SORT     BINARY
15     NLS_TERRITORY     AMERICA
16     NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
17     NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
18     NLS_TIME_FORMAT     HH.MI.SSXFF AM
19     NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
Here are the NLS parameters for the database that the database link connects to. (the TARGET database)
1     NLS_CALENDAR     GREGORIAN
2     NLS_CHARACTERSET     AL32UTF8
3     NLS_COMP     BINARY
4     NLS_CURRENCY     $
5     NLS_DATE_FORMAT     DD-MON-RR
6     NLS_DATE_LANGUAGE     AMERICAN
7     NLS_DUAL_CURRENCY     $
8     NLS_ISO_CURRENCY     AMERICA
9     NLS_LANGUAGE     AMERICAN
10     NLS_LENGTH_SEMANTICS     BYTE
11     NLS_NCHAR_CHARACTERSET     AL16UTF16
12     NLS_NCHAR_CONV_EXCP     FALSE
13     NLS_NUMERIC_CHARACTERS     .,
14     NLS_SORT     BINARY
15     NLS_TERRITORY     AMERICA
16     NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
17     NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
18     NLS_TIME_FORMAT     HH.MI.SSXFF AM
19     NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
The SOURCE database version is 10g Release 10.2.0.3.0 - Production
The TARGET database version is 11g Release 11.1.0.6.0 - 64bit Production
Do I need to modify the NLS settings in the SOURCE database before executing a script to insert data into the TARGET database?
Thanks, Jack

The difference in settings is not a problem by itself, especially that only the NLS_CHARACTERSET matters. Of course, this difference may lead to certain issues if not taken into consideration.
Please, describe symptoms of your problems.
-- Sergiusz

Transport tablespaces between databases with different character sets

Hi everyone:
I have two 10R2 databases on the same hp-ux 64bit server, 1st one with NLS_CHARACTERSET=US7ASCII, 2nd one with
NLS_CHARACTERSET=AL32UTF8.
NLS_NCHAR_CHARACTERSET on both databases is AL16UTF16.
Can I transfer tablespaces from the 1st one to the 2nd. The data could be in English, French & Spanish.
If not what are my options?
Thanks in advance.

First off, if you are storing French and Spanish data in database 1 where the character set is US7ASCII, you've got some serious problems. US7ASCII doesn't support non-English characters (accents, tildes, etc). If you're storing data this way, you've introduced data corruption that you'd have to resolve before copying the data data over to another machine.
Second, technically, the source and target character set have to be identical. Since US7ASCII is a strict binary superset of AL32UTF8, you could theoretically transport a US7ASCII tablespace to an AL32UTF8 database. In your case, though, since the data is not really US7ASCII, you'd end up with corruption.
Any of the Oracle built-in replication options is going to require that you resolve the corruption issue. Assuming that you can figure out what character set the source database really is, you could potentially dump the data to flat files (taking care not to allow character set conversion to take place) and SQL*Loader them into the destination system by identifying the proper character set in your control file. That's obviously going to be a rather laborious process, though.
Justin

HT5891 When switching between applications on different displays, Microsoft Word (or Excel) "steals focus" and becomes the active window.

In Mission Control, Displays have separate Spaces is checked. This happens regardlesss of whether I'm switching using Command+Tab or a mouse. Any suggestions?

There is a workaround for this problem, which was posted by Highestwater on the Microsoft Community thread for this bug and worked for me as well:
Go to
System Preferences > Mission Control >
and UN-check the box labeled "Displays have separate Spaces" (see image below)
The original poster on this thread may already be aware of this workaround, because he/she mentioned that the "separate Spaces" option is checked. But if you can live without the extra Mavericks dual display features (like going full screen in 1 display only, switching spaces independently on each display, and having a menu bar on each display), then uncheck this option and the "stealing focus" bug seems to disappear. For me the bug is so annoying that it's worth it to lose the extra features. Just yesterday I closed a Word document I was working on by mistake because I clicked on a Finder window on my other display and immediately pressed command-w to close it, without realizing that the focus had switched to my word document which closed instead. It was saved, but this sort of stuff interrupted my work enough to be both an annoyance and a time drain.

Can i do client export import between systems with different patch levels

we want to do a client export import between two systems. As I understand the patch levels should be the same in both for this to happen..
But right now I am in a situation where time is a big constrant. The basis patch level is on par. But the rest are not. Can I do client import successfully at this stage.

The only thing that may stop it working could be additional functionality between the systems.
I work on XI and there is a huge difference between SP12 and SP15. We were able to do the transports between systems, but as Dev was patched before QA, and the transport was reliant on standard settings not being available, it still went though, but we had to transport it again after applying SP15 to QA.
Again, it probably depends on what System you have running on Netweaver...

HT202213 how can i do sharing between devices with different IDs?

one of my kids has an ipod and an own apple ID and i would like to shara my own music with that device too.
i've tried logging it with my apple ID but got a message saying i would then not be able to share with my own devices for the next 90 days....??
i guess i'm doing something wrong.... appreciate any help!

Does he have his own computer to sync with. Is it separate from yours?
Then you could use Home Sharing to make sure both lots of content are the same on both machines.
He will have to authorise his machine with your Apple ID for any purchased music to be played
Store > Authorise this computer
Then set up Home Sharing
http://support.apple.com/kb/HT4620
When it is up and running you can import from 1 library to the other and then your son can sync whatever he wants from his own iTunes

Sharing music between iPods with different iTunes accounts

My wife bought a 2nd gen (?) 4G nano, plugged it into our home computer and synced it to my daughter's iTunes account. However, she wants to create her own iTunes account ... she doesn't care for all of my daughter's music, and she wants to download/listen to songs on her own iPod that might not be appropriate for my pre-teen daughter. However, she would like to keep some of the songs that are in my daughters iTunes account. Is this possible?

Click here and here for information.
(29996)

Switch between BPF with different enviroment

Similar Messages

Maybe you are looking for