Switching Content Area Portlet Edit/View Mode

I am trying this question again since I did not get responses to my first try.
The current Content Area Portlet included with Portal 3.0.8 works fine except that it does not include the "Main Banner" nor the "Sub Banner". This means that portlet users do not have access to either the "Edit/View folder" function nor the current folder name.
My customer would like some users to have item upload capability. What are my choices without these banners? I can access the content area in "full page" mode and have the banners available. But this is undesirable since we would like the content area to stay "in the portlet" in order to maintain portal context.
I might be able to switch the edit/view function from another portlet on the same page if I pass the p_edit and p_mode parameters to redraw the multiple portlet page correctly. I have tried passing p_edit using the portlet reference path "&162_KCPCONTENTAREA_6429252.p_edit=1", but the Content Area Portlet does not respond. What else do I need to do? Is this even possible?
Thanks for any advise you can provide
null

Please try the discussion forum for Content Areas at:
http://technet.oracle.com:89/cgi-bin/forumdisplay.cgi?action=topics&forum=Oracle9iAS+Portal+Content+Areas&number=82&DaysPrune=20&LastLogin=

Similar Messages

Switching Content Area Portlet Edit/View Folder Mode

The current Content Area Portlet included with Portal 3.0.8 works fine except that it does not include the "Main Banner" nor the "Sub Banner". This means that portlet users do not have access to either the "Edit/View folder" function nor the current folder name.
My customer would like some users to have item upload capability. What are my choices without these banners? I can access the content area in "full page" mode and have the banners available. But this is undesirable since we would like the content area to stay "in the portlet" in order to maintain portal context.
I might be able to switch the edit/view function from another portlet on the same page if I pass the p_edit and p_mode parameters to redraw the multiple portlet page correctly. I have tried passing p_edit using the portlet reference path "&162_KCPCONTENTAREA_6429252.p_edit=1", but the Content Area Portlet does not respond. What else do I need to do? Is this even possible?
I would appreciate any advise you can provide.
Thanks, Wendel Yale

I have determined that there will be be an edit link included in the Content Area Portlet in the 3.0.9 release due out in May. This leaves open the question of support for parameter passing for out-of-the-box portlets. Will (Is) this supported?

Disappearing content area in edit view

Hello,
In contribute, the content of my page dissapears when I click to "edit page." My other pages work fine when I click to edit, it is just one page that the content dissapears. Any ideas of how to get that back?
Below is the page before I click "edit page". The second image is what happens to the page after I click "edit page." I loose the data/text in the middle of the page that I need to change.
Thank you in advance for your help!!

You are not alone. I too cannot edit my home page. All other pages edit fine. Here is the home page. http://www.audiofilesolutions.com.
Here is how a subpage looks in CS4 & CS5 when editing.
And here is how the corrupted home page looks.
As you can see, all the text and content goes away except for the dropdown menus and links at the top and bottom. As I mentioned, this occurs in both CS4 and CS5 trial versions of Contribute. When trying File/Edit in external application which is notepad on my system, sometimes the text is formatted and coherant (like when you open View Source in IE8) and other times notepad opens up as all text, no spaces, or formatting of any kind--looks like a garbled mess.
Any help is appreciated.

Open content area in edit mode

Hello,
Is it possible to open content area and all folders in edit
mode. By default content area and folders are open in view mode.
Thanks

You can use URL items to display links to folders instead of
using Folder or subfolder links. Set the URL in the URL item to
the URL for the folder Edit mode.
Regards,
Jerry

The 'Edit folder' link doesn't appear in content area portlet (URGENT)

Hi! I made three content areas, and published them as portlets in a page. However, when I enter the page as an authorized user, I don't see the 'Edit folder' link on any content area portlet. But if I enter to any of the content area pages with the same user, I see the link
Is this a bug? What could be the reason?
Thanks a lot!
Luis

try this...
Edit the page where you added the portlets. Click the edit defaults link next to each of the portlets and scroll down to make sure the show Edit Link checkbox is checked. I don4t see any Edit Link checkbox when I edit the portlet's defaults!!
What should it be?

Help: lost our content area portlet (site)

On the "Oracle Portal Navigator" page under the "Content Area" tab someone deleted the "Site" portlet. How do I add the "Site" portlet back to the page?
I clicked on the customize page and tried to find the portlet to add but it is not listed. I then went to the portlet repository to see if it was expired or something but it was not there.
There is a "Content Areas" portlet that lets you select the content area to go to, but the navigate button takes you back to the "Oracle Portal Navigator" page to the "Content Area" tab.
The same thing happens when you go to the Admin section of a site and try to see the categories for that site. I can't edit my categories anymore.
They point to "Oracle Portal Navigator" page showing the "Content Area" tab, which is no longer the site portlet.
Any ideas?
Jeff Dalgliesh
PS I know its called the "Site" portlet because on A DIFFERENT portal server if I click the customize link on the "Oracle Portal Navigator" page under the "Content Area" tab that is the name it shows the Provider is "Oracle Portal" and the portlet is called "Site". IE "Oracle Portal: Site"

We are using 3.0.6.6.5
I tried the query and got the following record
<TABLE border="0" cellspacing=0 cellpadding=2 style="background-color:#E0E0D0">
<TR>
<TH ALIGN="Right" style="background-color:#C0C0A0" >ID</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >PORTLET ID</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >PROVIDER ID</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >PAGE ID</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >REGION ID</TH>
<TH ALIGN="Left" style="background-color:#C0C0A0" >NAME</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >SEQ</TH>
<TH ALIGN="Left" style="background-color:#C0C0A0" >USER ID</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >INCLUDE</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >CONTENT TYPE</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >CONTAINER ID</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >IS TAB</TH>
<TH ALIGN="Right" style="background-color:#C0C0A0" >TIMEOUT</TH>
<TH ALIGN="Left" style="background-color:#C0C0A0" >TIMEOUT MSG</TH>
</TR>
<TR>
<TD ALIGN="Right" valign="TOP" WIDTH="0">44</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">23</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">960254</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">3</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">69</TD>
<TD ALIGN="Left" valign="TOP" WIDTH="0">44_SITEEXPLORER_960254</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">2</TD>
<TD ALIGN="Left" valign="TOP" WIDTH="0"><BASE></TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">1</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">1</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">3</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">1</TD>
<TD ALIGN="Right" valign="TOP" WIDTH="0">(null)</TD>
<TD ALIGN="Left" valign="TOP" WIDTH="0">(null)</TD>
</TR>
</TABLE>
The problem is on the nagivator page under the content area tab there is no portlet for manageing the content areas.
Jeff

Display sales area data in view mode?

Hello,
we use CRM 7.0 with the WebUI. In Account view we have the assignment block of sales area data. but in this assignment block we only have the possibility to open the sales area data in Edit mode.
Is there a way to open the sales area data in view mode and if how does it work?

Hi Fabian,
If you see this block as delivered by SAP, its in display mode with possibility of edit( button to edit ). If you want to take out this button/disable this button then you will have to redefine GET_OCA_T_TABLE from IMPL class of respective view ( BPSALES/CorpAccountSalesAreasOV) also you will have to remove buttons for adding new entry by redefining DO_PREPARE_OUTPUT.
Regards,
BJ

Public user sees old content of items in content area/portlets

I have items in my Content Area, as pl/sql folders, text and pl/sql items. These are all published as portlets. Access is set to public. The content of these items have been altered a couple of times during development, and they work as they should when I4m logged in as a user.
However, when I access these items (both directly by an url to the content area and by an url to the page containing the portlets) as the public user (not logged in), the content of these items is old. The content could be several weeks old, actually it is possible that the displayed content is the original content of the specific item (as it was when I first created the items).
To me, it sounds like a cache issue, and I tried to set "Enable plsql caching" to "no", with no improvement.
What can I do to solve this?
/Sara

You could try flushing the cache content by navigating to
$ORACLE_HOME/Apache/modplsql/cache
..and deleting the directories and all content beneath them.
This is guaranteed to cause a cache rewrite.
You should also set your page cache settings to 'Dont Cache' which will guarantee that the cache is not being used.
You can check the caching status of a portlet on a page by adding _debug=1 to the URL you are viewing.
You can read more about it here..
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/TROUBLESHOOTING_ISSUES_IN_ORACLE9IAS_PORTAL2.HTM#31
What patch/version are you running ?

How can i make the navigation easier in my content area? (TREE VIEW)

Now I use 1 navbar for my whole content area.
This is what I want :
I would like to navigatie in my content area lik I navigate in the explorer of microsoft.
Is there a script,
portlet, or something like that.
when I delete a folder it must automaticle disapear from the tree view.
When I add it must be displayed.
When the folder isn't public it, the public can't see it
thxc in advance
Bert Leeman

If you are using the same nav bar you could build a custom nav bar in the shared objects and publish it as a portlet. In the properties of a folder you can assign an image for the nav bar. This could make it look like a tree assuming you build the images that way. Also your folder links should disappear from the nav bar when they are deleted. I think.

Content area portlet empty

Hi,
I've set the page assigned to some content area as the homepage
for public users. In this way, when a user enters the site or
when he/she logouts, Portal shows that page.
The problem is that the portlet corresponding to the content
area page shows nothing! Changing the url (like
http://site/pls/fortal30/folder/...) gets the correct answer.
How can I change this behavior?
TIA

Did you use the generic folder portlet on the page, or did you
publish the folder as a portlet? If you used the generic folder
portlet, did you select the folder as a customization, or did
you use Edit Defaults.
Assuming that you used the generic folder portlet, and that you
customized it (vs. using edit defaults), you need to do the
following:
- Publish the folder as a portlet, and replace the generic
portlet with the published folder portlet (this is the
recommended alternative)
or
- Use edit defaults to select the folder you want in the generic
folder portlet.
Regards,
Jerry

Link to content area - portlet not available

I have a link to a content area in that I open from another application. Occassionally, I get a "portlet not available" message. Is this related to navigating directly to the document repository? It works most of the time.
So 3 questions:
Is it acceptable to navigate directly to the content area? (My users then log on and store documents)
Am I getting the "portlet not available" message because of navigating to the content area this way?
Is there another reason I'm getting this message?
Thank you

Unfortunately, the only way to do this would be to not show the sub-folder region and add URL items in another region that link to the folder page in question.

How to create folder and items in content area without edit folder option

Hello!!
I would like to create something to users can create and insert folders and items in content area without using the edit folder option.They would have a form to include the name of the file and the name.i would like to do this for the end users can insert files more easily. Can i do this? Anyone can help me ??
Thanks in advance!!!
null

The wwsbr_api and wwsbr_search_api packages are included in the current PDK, but won't be supported until 3.0.8 is release, later this month.
Regards,
Jerry
null

Blank page produced when clicking on title of Content Area Portlet in version 3.0.8

We are getting a blank page when we click the title of the ContentArea/Folder portlet in a page. The problem is with the URL, which has _mode=6 as a parameter. When we reoved that parameter from the url content area is loaded accurately. Can you please tell us how to fix this bug. We are using 3.0.8.

Hi,
go to http://metalink.oracle.com/
click on PATCHES and search for product PORTAL release 3.0.8, platform Sun Solaris. The result is:
"ID:694095 Patch::1574770
BLANK PAGE DISPLAYED WHEN CLICKING SOME PORTLET LINKS IN MONITOR TAB PAGE".
Download the patch and follow the instructions.
Bye,
Ettore.
null

Exp/Imp content Area Portlet..?

How to Exp/Imp "Content area folder published as a portlet" which reside in "WWSBR_SITEBUILDER_PROVIDER".
Anybody from Oracle..?
Thanks.
Rakesh

I assume you are using the 309 version of portal. It is possible to export out an entire content area or a page but not the granular items. By granular I mean just the folder in this context. If you wish to export/import the entire content area/page, you can run the pageexp/pageimp/contexp/contimp scripts which reside in the WWU directory.

Content Area: Cannot edit/drill down to folders at the lowest level

URGENT: Need your help.
I am using Oracle Portal 3.0.6 (Production) installed on Win NT 4.0 Server with Oracle 8.1.7. I am working on hosting a website for my development group.
I created a Content Area and associated it with a page style. Then I created numerous folders to meet the requirements of the various product teams working in my team. Under each folders, I created various sub-folders. Now I want to add items under each folder I created. Earlier, using the link "Edit Folder", I could do by clicking on the folder under which I wanted to create an item. Now when I click on the folder, it returns back the same page showing all the folders along with the icons meant for "Edit", "Add", "Delete", "Move" and "Copy". Nothing is happening and I am stuck here. It displays all the sub-folders with links upto 2-level, since I set the navigator property to the level 2. But I cannot navigate to the sub-folder created at the third level by clicking on the sub-folder link above it (at the 2-level) and add any items under the clicked folder.
Only mistake I could think about was by mistake, I tried to delete a content area which was created for test purpose. There were folders created under this. But I attempted to delete the content area directly without deleting the folders underneath. I got an error saying ".... child records exist". Later while clicking on the tab "content area", I was getting the following error:
An unexpected error ORA-06503: PL/SQL: Function returned without value occurred when executing action of the SITE datasource. (WWC-38130)
(WWS-00000)
Error:No data found (WWS-32101)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
normal, successful completion (WWS-00000)
All product teams already submitted the contents they want me to put on the folders but I am unable to resolve the above problem. Any help / pointer to the above issue will be highly appreciated.
Thanks in advance
Jay

Hierarchy keys are set properly and "use for display" is checked.
Dimension presentation hierarchies does not work only when I use particular two hierarchies togather in one report table. When each of hierarchies is displayed separately it works ok.

Switching Content Area Portlet Edit/View Mode

Similar Messages

Maybe you are looking for