Switching display between external and eternal monitor?

I have a laptop with few functions but I have a port for external monitor. I plugged it in and, of course, nothing happened. How can I switch the view?
/Richard

riwa wrote:
I have no idea what Fn+Fn5 means. Is that an Fn+F5? If so, do I need the screen connected to actually notice any difference (IE to be able to tell if it works).
[edit]
With that said I meant that I've tried it without the screen connected and without success.
[/edit]
I think you should have another screen connected
I have an Acer Aspire 1694wlmi and I confirm that the key is Fn+F5
But I haven't gotten my TV-out to work yet!
(Ati mobility radeon x700)

Similar Messages

  • HT2729 How do I switch movies between sd and hd on my computer

    How do I switch movies between SD and HD.

    System Preferences > Display > Arrangement
    Drag the white Menu bar from the main screen to the second screen.

  • Choosing between external and partner application and problem with login

    We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
    I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
    Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
    There are at least two problems I have encountered defining the application as external:
    1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
    2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
    I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
    Thank you

    Just some information :
    - The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
    - There is also another thing I don't understand. The link to external application is something like:
    javascript:open_jwindow('../ealogin?ID=76D4766','76');
    and couldn't be executed outside pls/orasso
    in other words we can't give that to our users, can we? They should login to orassso and see that?
    We don't want to involve them in Identity Management...
    Any help is appreciated....
    Regards

  • How do I switch iMac between external display with non-Apple keyboard?

    When using the Apple Wireless keyboard that came with my iMac, I can press Cmd+F2 to switch between the iMac display and a PC connected to the DisplayPort input of the iMac.
    However, I prefer to use a USB (non-Apple) keyboard as I can connect that to a USB switch and share the same keyboard between my iMac and my PC. However, pressing Cmd+F2 on the non-Apple keyboard does not seem to work.
    I suspect this is because it's not actually "Cmd+F2" but rather "Cmd+Brightness Up" and my external keyboard does not have a "Brightness Up" key.
    Is there any way to mimic "Cmd+Brightness Up" on a non-Apple keyboard? Of is there some other way to force the iMac to switch between inputs?
    It's annoying to have to keep the Apple keyboard around for the sole purpose of switching between inputs.

    If they're on the same wireless network, there is no inherent difference between this and a wired network.
    If the sharing isn't working then there's something else amiss. Can you describe the network setup in more detail so that someone might be able to spot the issue.

  • Diff between RSA7 and qRFC MOnitor

    Hi all,
    What is the relationship between RSA7 and the qRFC monitor (Transaction SMQ1)?
    regards,
    jimmy

    Hi jimmy,
    The qRFC monitor basically displays the same data as RSA7. The internal queue name must be used for selection on the initial screen of the qRFC monitor. This is made up of the prefix 'BW, the client and the short name of the DataSource. For DataSources whose name are 19 characters long or shorter, the short name corresponds to the name of the DataSource. For DataSources whose name is longer than 19 characters (for delta-capable DataSources only possible as of PlugIn 2001.1) the short name is assigned in table ROOSSHORTN.
    In the qRFC monitor you cannot distinguish between repeatable and new LUWs. Moreover, the data of a LUW is displayed in an unstructured manner there.
    Regards,
    Anish

  • The Correct Space Between You And Your Monitors

    Something that always crossed my mind was the space between your monitors and where you are seated. How far exactly are you supposed to be positioned from your speakers in order to read and hear correctly. Most producers would comment that people produce in all types of environments, headphone close rang monitors, far range monitors. But what exactly is the ideal space between you and your speakers? To look into this issued even more closely each speaker is designed differently, there for you cannot look at them all equal as far as performance is concerned.
    How far are you away from your speakers?

    dude it depends what you want
    I got mine at about 1-meter to 1.5-meters at my home studio
    at the big studio i've got two pairs of monitors in there and they both 1.5 meters
    other people will go as far as 3-meters, in your case get abit closer as you said before that your room is not acoustically treated there for sitting too far away will give you a mix of 50% of the speakers and 50% of the room
    but you need 80% of the speakers and 20% of the room
    ps: don't just leave this topic alone and start another one, because its annoying when people don't if you've been help or not and they keep trying to help you
    and people also don't know if you are reading your post or your just using it as an amusement forum just for fun on your lunch breaks
    so please reply back and let people know if they've helped
    stash

  • How to switch progamatically between line and symbol plot ?

    I am trying to switch between symbol and line plot (XY-graph) programatically. (I know jow to do it on the front panel.) I thought I could do it through property nodes, but there is no PlotType property node, only PointType, LineType, and LineWidth. If I set LineWidth and LineStyle to zero I get a continous line connecting my symbols. If I set LineWidth to zero and LineStyle to 1, althoug, the Legend shows only symbols I get a dashed line connecting the symbols. Also, is somewhere a desciption what the LineType and PointType codes mean?
    Thanks,
    George

    When you right click on a plot legend and select 'Common Plots', there are several plot properties that get changed. There is no single property to change between the different option. I would recomend that you place a property node on you block diagram and select Plot.Point Style, Plot.Line Style,Plot.Line Width, Plot.Plot Interpolation, and Plot.Plot Fill To and create indicators for each. Then manually change the Common PLots setting and take note of the diffferences. There is help for each of the properties and the help will refer you to the front panel menu options. For example, the help for Point Sytle says that the values are 0-16 as shown on the menu from top-left to bottom-right.

  • Switch Service Between Bionic and Original Droid

    I am transitioning from my original Droid to a Bionic.  However, I would like to continue using my original Droid at work.  (I've killed the camera in the original for work, and would prefer not to do the same with the new Bionic).  I was expecting to be able use *228 to switch the service between the two phones, but I now understand that *228 does not work with the 4G Sim Card.  Is there still a way to switch my number back and forth between the two phones?

    Hi Fool68,
    I see the reason why you want to switch devices, since you have limitations on using the camera while at work. Thank you to the community for your responses. 
    With a 4G phone, once the line is switched to a 3G device, the SIM card does have to be replaced in many cases. Changing devices from 4G to 3G is different, as the community mentioned. Below is some additional information. 
    original 4G SIM can be re-used with the same phone number if the technology change back to 4G is processed prior to 12:00 a.m. ET of the day the 3G change was initially completed.
    After 12:00 a.m. ET, a new 4G SIM is required in order for the line to go back to 4G.  
    SIM cards can be obtained online, if needed. There is no charge for a SIM replacement. To order online, please make the change of the devices online and visit http://www.vzw.com  . Login to your online My Verizon Account (with the Account Holder Number). 
    If a replacement card is needed, you will receive this option in the screen when making the change in devices and there is no cost. 
    I hope this information is helpful. Have a good day!

  • After installing lion, my computer switches constantly between dashboard and current screen

    I installed lion this morning and my screen switches rapidly between the dashboard and current screen, initially i thought it was my mouse, but after changing mouse I still get this issue and when my computer has been out of use for a while, i have to "erase" the screen to get to my login, any ideas?

    After restarting your computer, try booting into the "recovery HD" by holding down Option at startup and try re-installing Lion. I had the Same problem when I installed Lion but that fixed it.
    Rember: back up your data first through time machine so you can restore to the backup once you get Lion reinstalled.

  • Multiple display between Mac and Ipad

    I have an IPAD with latest IOS system and a Mac with Maverick.
    Would multi display works between Mac and Ipad?
    If so, where can I found manual or instruction to make it works?
    Thanks.

    You'd have to use something like DisplayPad to do that. I have it set up on my system and its working great under Mavericks (it wasn't supported under Mountain Lion on my system).
    Good luck.

  • Windows 8.1 screen bounces between primary and secondary monitors

    I have a Lenovo T530 laptop with a docking station and a IBM monitor L200P attached to it.
    Up until yesterday, this configuration was running Windows 8 Pro with no issues.
    However today, after I installed the Windows 8.1 upgrade, I started having problems with the screen bouncing between the primary and secondary monitors without my intervention. The problem happens very regularly, regardless of whether I have selected the laptop as primary monitor or the IBM monitor attached to the docking station.
    I verified that the problem does not happen with Windows 7 and Windows 8 installation and only starts appearing after the Windows 8.1 upgrade is applied.
    Does anybody have similar problems
    Thank you in advance.

    O''philipp [[#answer-697652|said]]''
    <blockquote>
    another thing you could try is this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''.
    double-click it and change its value to '''1.2''' (or any other zoom factor that fits your purpose: 1.0 relates to 100%, 1.2 equals 120% and so on; -1.0 is the default value and will adhere to the system settings).
    </blockquote>
    Okay, I tried it, set it to 1.2 and even more stuff got blurry and fuzzy. Besides everything in the FF menu bar everything in the header on youtube and a few other pages did it too. It did make the pages fill the actual page better, but the blur is worse than this prob so I set it back to -1.0.
    Any other ideas?

  • Graphic distortion when switching between external and built-in display (rMBP)

    Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
    Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

    Do you have intel gpy as well as other graphic card?  You may be viewing document on different gpu's.  PS does not like multiple gpu's.

  • Multiple displays with 15"and 19"monitor using a VGA splitter on my Mac Pro

    Hi, so I have a brand spanking new Mac Pro and have been using a cheap, basic 15" monitor with it. As I'm doing lots of Edit/graphics work I've just purchased a new monitor, it's a 19" Acer flatscreen. Now I'm hoping to work the same display across both monitors, so I can set up my preview window on the 15" and do my work on the 19" screen.
    The Mac has two DVI output sockets in the back, both monitors are VGA but I only have one DVI to VGA adaptor. Though I do have a VGA splitter! So I've tried going from one DVI socket to VGA, then put the splitter into that and then each monitor into each split socket, if that makes sense? I now have the same display on each screen i.e. while I'm typing this I'm looking at it twice but I want to see it once over two screens, how do I adjust this, there's no option in display settings?
    Is it simply that I need to buy another DVI to VGA adaptor and use the other port? Just looking to save myself a tenner, that's all!
    Thanks!
    Alex

    Yep, you're right! Thanks, working now, very useful.

  • Can you switch back between CS5 and CS5.5 with the same project with Premiere??

    Hey all,
    I just got CS5.5 for Mac (Lion) and was wondering if i am able to save a project and open it with CS5 Premiere because I work with one other editor who has CS5. I have tested saving a project in CS5.5 and opening it in CS5 but it says that it needs to convert first but then it seems to work fine. So basically, is there workflow good between the 2? Any known issues or anything else i should know about when switching back and forth?
    Also, I have the student edition of CS5.5 and was wondering how many times can I install it? I plan on buying a new computer in a few months from now but currently have 2 and was wondering if i should install it on both my current computers and then deactivate one and install it on my new computer in the future? Or is there a limit and that will not work?
    Thanks!!

    Because it has to create a new "version" of your project every time you go back and forth, you'll end up with umpteen versions if you go back and forth every time which could become a nightmare for you... And because it creates new "versions" every time, you're far more likely to end up with a corrupted file at some point... I'd stay away of going back and forth between versions...
    As an aside, does anyone know if you can go back and forth between the same version (CS5.5) on different platforms (Mac/PC)? I may need to start doing that soon at work, and I've never tried...

  • Different figure display between Balance and Line items

    How can I find out the difference between line item and Balance in FS10n?
    Actually when I Executing the FS10N the balance of DR. balance is greater then that account Dr. Balance line item.
    Can any one tell me why?
    Thanks & Regards,
    Anandakumar

    Its a sundry debtors gl account. All the line item and open item transaction balance are displaying.
    but the amount is not displaying (difference amount).
    Any one has solution pls tell me.
    Thanks in Advance,
    Anandkumar

Maybe you are looking for