SXMB_MONI not displaying Synchronous messages

Our production instance of XI only displays Asynchronous messages and those Synchronous messages that fail. For testing purposes I need to see all my Synchronous messages, regardless of success or failure. Is there some configuration I need to do to modify this behaviour. I've searched SDN without any luck.

Steps are mentioned in this Blog by Michal
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Thanks
Farooq.

Similar Messages

How sxmb_moni is displaying the messages

Hi,
I want to know how sxmb_moni is displaying the error information.
when messages are listed and we select one error message.If we click error_information button it displays a pop up with detailed errors.
Can some one please tell me from where it retrieves the messages. is it from any data base table.
I have debugged standard program with out any clue

Hi samir,
you are right as i am calling the cl_proxy_fault and passing the exception class name.
But my requirement is can i know where this error messgae will get stored.
I feel tht unless it stores in database table it will not display the message in sxmb_moni.
( Here i am talking about additional error information )
Please correct if i am wrong
Edited by: ch_ravi_sap on Feb 17, 2012 12:43 PM

Mail not displaying certain messages

Mail is suddenly not displaying certain messages in mailboxes. I can see and select the message in the center pane, but when I click on it to display, I get the "Loading" text and the spinner. This continues without resolution, though sometimes the messages will display after quitting Mail and/or rebuilding the Mailbox.
It is not random messages that do this, but always the same ones that refuse to display. But they will display sometimes after a rebuild, so I know they aren't gone.
Some have image attachtments, others do not.
This just started this morning, following running Disk Utility to repair some HD corruption last night. Prior to that, Mail (and Safari) had been running very slowly for about three weeks.
I have already repaired permissions on this drive.

Acutab,
I had the same problem. I took your advice and rebuilt the mailbox-voila. The problem was solved. I have also noticed Safari running slow. I will try and run Disk Utility

ADF FACES: af:messages/ does not display my messages at all

I am having an issue displaying messages using ADF MyFaces EA20.
<af:messages />
Within all backing beans I call messages with the following method to conveniently display messages when needed.
// Add invalid email address message
JSFUtils.addMsgToContext(FacesMessage.SEVERITY_ERROR, "setEmail_error", MsgConstants.INVALID_EMAIL);
The method utilized can be seen below:
public static void addMsgToContext(FacesMessage.Severity severity, String msgKey, String descKey) {
    // Check the parameter, if either short desc or desc both are empty
    if (StringUtils.isEmpty(descKey)) {
        logger.error("Message description are empty. Do NOTHING just return");
        return;
    try {
        logger.debug("Add Message to Context");
        FacesContext context = FacesContext.getCurrentInstance();
        Application application = context.getApplication();
        // Add the message to the context
        context.addMessage(msgKey, getMessageFromBundle(descKey, severity));
    } catch (RuntimeException e) {
        * Supress RuntimeException.
        logger.error("Error occured when add message to context", e);
With the first login page when validating username and password, the messages I send to the context display correctly, for example, incorrect password please try again and this uses exactly the same code as above in the backing bean.
However once a session has started the messages simply do not get displayed and are not included in the HTML the <af:messages /> is replaced with nothing.
No runtime exception is thrown.
If anyone has any idea of why the messages are not being displayed I would be very grateful to hear them.
Finally if I may add that I used this method of displaying messages in a previous project and it was fine. This time the only difference is that I am using Hibernate.
The closest answer I could find to a similar issue with Oracle Forums was:
The messages have to be added before the Render Response phase. It's generally very unusual to add messages in a bean getter/setter. I'd restrict yourself to adding messages in event listeners and actions.
I do put messages in my setter methods as this is where I perform validation, but I have tried moving them to the main method called by the action button and this still does not display my messages.

Frank
There is a standard way? Next time you can simply tell me to RTFM ;-) . I am working on a project and was assigned my particular section and was told that the messaging aspect and validation was not urgent, until now near the end of the project when it has become urgent. Rather then listen to my colleagues answer of "this is the way to do it" your answer suggested that we working in a non-standard way.
Having looked at Oracle JDeveloper 10g (10.1.3) Documentation, Validation, Conversion, and the Application Lifecycle section I noticed:
Render response:
Either display new page based on invoked navigation rules, or displays same page with errors.
I was providing a new navigation String to the same page under all conditions, which I guess gives a new context and so does not display the messages. Under error conditions I now return an empty navigation String and now it displays my messages.
Thank you for your help with this and I promise to read the manual next time.
Andrew

Not displaying Log Message

Hi All,
I facing problem in displaying the log message.
Here is what I am doing.
I have created a RDF Report, In that In Before Report Trigger I have called Packaged.Procedure.
(Packaged.Procedure has all code that is needed.
I have used the
fnd_file.put_line(fnd_file.log,'Message') to display message in log.
But when I ran the report I am getting the expected output. But when in Log I am not seeing the Message.
Please help me how to display message. Or is there any way to display message in Log.
Note: I didn't register the package as Concurrent Program. I have Concurrent program of type Oracle Report.
In package I didn't use parameter ERRBUFF and RETCODE, since it is necessary only if we register as Concurrent program.
Thanks in advance.
Regards,
Uva.

Hi!
Lets try these once again even if u followed previously....
1. First go to SXI_CACHE and do cache refresh once inorder to reflect the IR and ID Objects once again....
2. Also do Adapter Cache refresh once again some times adapters may not reflect the updated changes and then now make some changes in the SUBject and save and activate it..
3. THis Point is Optional Suppoe if you are using any FTP FILE ADAPTER
Check the source and destination folders are same as give in your channel and FTP also please check the file name mentioned is exactly same and make sure there may not be any spaces
4. If possible if u r admin do once J2EE Soft Restart instead of restarting entire server..or else instead of doing hard restart..
5. After making changes and saving and activating try the scenario once aand also go to Run time work bench and communication channel Monitoring onceagain check the status...
6. Most important thing is Go To RWB--> Message Monitoring--> Check the status of the message in both Integration Engine and Adapter ENgine so that you can get where it is failing and also where it was strucked....whether in Integration server side or else Adapter Engine side...
7. Also please check one again SXMB_MONI, SMQ1 and SMQ2 and ST01 ( which is used to Trace the message by using this ST01),,,
I hope it works....also check once mapping side once again...
Regards:
Amar Srinivas Eli

IChat will not display status messages.

I'm having a problem - iChat will not display any "available" status messages. All away messages display properly, but any unique status messages will not display, nor does the word "available". I have restarted both iChat and my MacBook several times, deleted the com.ichat.AIM preferences file, but it seems nothing I do will make my buddy's unique status messages display.
I did not previously use Chax but downloaded it to see if it would help; it didn't. I'm willing to delete it if it will solve my problem.
Any help?
Thanks!
Message was edited by: Paperclippe

Ok,
As you either suspected or found out the Saved Status Messages are in com.apple.ihat.plist
The fact they didn't display would suggest that they may have become corrupted and the deletion of the .plist would have helped.
BUT you went on to mention that the Available Choice also does not display.
This would suggest one of two things.
1) Either you are not fully Logged in to the AIM servers properly
Do your Buddies see you are On-line and Available ?
Do they perceive your Status change ?
Can you Text chat to people ?
Can you send files or Pic in Text chats ?
Try Deleting com.apple.ichat.AIM.plist and restarting iChat to see if that helps
2) Something about iChat or it's support folders (the bits that make the Available show up), that are at fault.
In this case try deleting com.apple.ichatAgent.plist
This controls which accounts login and help the app to run some of the features such as the Video/Audio part and Text Messaging.
I would do these one at a time just so you know which it was that fixed it.
8:27 PM Friday; June 20, 2008

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

SXMB_MONI not displaying the payload

Hi , I am new to XI. any help is greatly appreciated..
i am doing the following steps..
1) initiating SXMB_MONI
2) click on Monitor for Processed XML messages
3) View the XML Messages
4) Click on a message.
this is where the problem is
Intead of displaying the message , a "File Download - Security Warning " dialog appears asking me "do you want to save this file" ..
Any ideas on how to solve this..
thanks
Chandra

Thanks for your reply..
I can click an xml file on my desktop and it open up in IE with out a problem..
I compared all my IE settings with another desktop where it displays the messages.. all setting are the same..
I even tried re-installing the explorer.. but that didn't help either..
thanks
chandra

FRM-40200 (Not displaying the message)

Hello Guru,
I am using oracle database 11g and forms 10.0.1.2.3 version. I have a for with 2 block. One block is non data base block. Another is data base block, but query data source type is from clause query. i.e. this block is depend on a query. In the when-new-form-instance trigger I am executing the query add getting the result. The block insert and update property is false. After load the form If I am updating the items value, I am not getting the message "FRM-40200: Form is protected against update". Alos the on-error and on-message triggers are not firing. In on-error trigger I am not handing any error, also I am not supressing any error in the on-message. Any reasion for this, and how to display the default message?
Thanks
SUN
Edited by: User SUN@ on Apr 20, 2009 3:41 PM

hi,
a from clause query does not allow updates.
You have a couple of options.
Convert your from clause query to a vew and (if the view is key-preserved) you will be able to update the returned records
Base your block on a procedure and write update/lock procedures to process your updates
Hope this helps
Neil

Raise_application_error is not displaying error message in my form

Hi,
I have created one procedure in order to display the error message in front end forms.But which is not display the error message in my form when call the procedure.
Please refer the code.
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR(-20001,P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
END;
Thanks & advance
Regards
Maran

Hi,
-------form program unit------
PROCEDURE RAISE_APP_ERR(P_ERR_CODE NUMBER) IS
alert_button NUMBER;
Raise_Exception EXCEPTION;
PRAGMA EXCEPTION_INIT(Raise_Exception, -20001);
BEGIN
--- called backend procedure
PRC_RAISE_APPLICATION(P_ERR_CODE);
EXCEPTION
WHEN Raise_Exception THEN
alert_button := SHOW_ALERT('raise_alert');
If alert_button = ALERT_BUTTON1 Then
Raise FORM_TRIGGER_FAILURE;
End If;
END;
---------- db proc----
CREATE OR REPLACE PROCEDURE PRC_RAISE_APPLICATION(P_ERROR_CODE IN HRM_ERR_CODE.HEC_ERR_CODE%TYPE
) AS
CURSOR C_ERR IS
SELECT HEC_ERR_ARB_DESC
FROM HRM_ERR_CODE
WHERE HEC_ERR_CODE = P_ERROR_CODE;
M_ERR_ARB_DESC HRM_ERR_CODE.HEC_ERR_ARB_DESC%TYPE;
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
IF C_ERR%NOTFOUND THEN
M_ERR_ARB_DESC := 'UNKNOWN ERROR ';
END IF;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
EXCEPTION
WHEN NO_DATA_FOUND THEN
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||'-'||'UNKNOWN ERROR ');
END ;
I tried the same but still i am not getting error message in Forms.

Method Validator is not displaying Error Messages

Hi!
I'm using JDeveloper 10.1.3.1.0. I have to validate the value of a particular field in a form, and I've done this via method validator on my Entity Object. If the validation succeeds, I return true; otherwise, I return false as specified in the documentation. The issue is that the error message I added via the wizard is not appearing when my code returns false. I debugged my application and verified that my test case did indeed fail validation and return a false value, but no error message appeared. Furthermore, I tried raising a JboException in this validation code, and it too didn't appear.
However, when I placed my validation code in the setXXX method of the attribute I was validating, the JboException message was displayed.
Given that the ADF manual is encouraging developers to place validation code in method validators, I found it strange that any excpetions thrown by method validators colud not displayed.
Can anyone help clarify this behavior?
Thanks!
Rey

Rey,
What view technology are you using (JSF, Swing, etc)? If you are using ADF Faces, do you have an af:messages component on the page?
Regards,
John

Why do IMAP accounts not display new messages in viewer?

I have been having persistent problems with Mail not displaying new IMAP messages in the viewer. I know the messages are on the server because I can see them on my iPhone. Sometimes they will appear if I quit Mail, then relaunch it. Other times it is necessary to restart to make them appear. I have deleted and recreated the accounts (MobileMe and Gmail), reinstalled the 10.5.7 update and applied the latest Java update.
The Console messages make it seem like in might be a conflict with Safari 4.02. Upon starting Mail I get messages like this:
07/27/2009 3:01:35 PM Mail[302] WebKit Threading Violation - NSData* -[WebArchive data](WebArchive*, objc_selector*) called from secondary thread.
I've seen similar complaints elsewhere in forums, but have found no solutions. Is there one?

Can you refrain from viewing the messages on the iPhone, and only check via webmail to see if new ones are then failing to be noted?
Btw, in Mail Preferences/Accounts/Advanced is use IDLE selected for either account -- I select it for MobileMe, but not for Gmail? When selected for MobileMe, the mail is "pushed" to eligible devices, and in Mail, results in the new message chime not sounding for that one account.
Ernie

N73 not displaying txt messages! HELP!!

Hi there...pls help me....
had my N73 for months everything been ok!
For some reason today it will not display when I get a txt message, it does when i have a missed call but not when i get a txt...doesnt make a noise or anything!
Please help me!!!
xxxxx

12345
Nokia N95
V 20.0.015
0546553

HT1430 My inbox will not display all messages

My inbox will not display all messages

Close the mail app and reboot the iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the mail icon. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Report with BDC not displaying success message when run in Background

I am running a BDC report in Background mode.The below statement is not capturing the Success message when a document is posted.But when I am running the same in ForeGround mode it is capturing and is displayed in the output.Can anyone please help me in understanding why this is happening and how can I resolve this.
CALL TRANSACTION 'MB1C' USING bdcdata MODE mode UPDATE 'S'
MESSAGES INTO messtab.

Hi Madhu,
I think your BDC didnt generated any document when you run it in 'N' screen mode.
Debug your program when you run it in background
Goto Tcode :SM37
Select the job ( march checkbox )
==> in command prompt enter 'JDBG'
==> Then you can start reexecting the job .
You can check the sucess messages accordingly in debug mode
Also add a read statement on messtab for msgtype = 'S'.
Thanks
Bhanu

SXMB_MONI not displaying Synchronous messages

Similar Messages

Maybe you are looking for