SXMB_MONI-- Processing Statistcs - XML messages in "Being Edited" State

Under SXMB_MONI--> Processing Statistics, I see that I have a large number of messages in a state of "XML Message being edited". I need to delete these messages out of my system. The regular delete jobs do not work because they are not in a state of Complete Successfully or in error.
These are causing my persistence layer to be above 100%. Any input is appreciated. All of the online help mentions every statistic on this page except for the "XML message being edited".
Thanks!

delete messages in SXMB_MONI
For step by step procedure of how to archieve and delete messages in XI go through the urls:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50

Similar Messages

Processing large XML messages ( 100Mb) in PI 7.1

Hi All
I have PI 7.1 & need to process & create Large XML messages with not so extensive mapping & direction is from SAP to FTP server.
I created the test scenario using Consumer Proxy in order to check how large message our PI server can handle, so till 100Mb it went fine but anything above 100Mb got stuck in R3 server Integration engine only. When I checked the message in MONI of R3 server, initially it gives "Automatic Restart" status & after the retry limit was over it gave me "System Error-after automatic restart" with the error status as -->
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Can you let me know how can we further tune our SAP R3 server to process the large files as the message is getting stuck in R3 server (at HTTP_SEND) only it is not even reaching PI server, also breaking message into small messages cannot be implemented as we need to send the file in ONE go only.
Regards
Lalit
Edited by: Lalit Chaudhary on May 5, 2009 6:05 PM
Edited by: Lalit Chaudhary on May 6, 2009 2:49 AM

so till 100Mb it went fine but anything above 100Mb got stuck in R3 server Integration engine only
all the systems are configured with a default timeout parameter....it determines till what time a system should try processing a file...if this is exceeded then you may get the mentioned error....
So what you can do is try increasing the timeout of your system....so that you give the system some more time for processing the file
Please note that increasing the timeout would mean decreasing performance
To check how much is the impact see the performance before increasing the timeout and after increasing..
If you need some help in file processing in XI:
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
Hope it helps.
regards,
Abhishek.

XML messages not processed

Hi all,
I have a problem in my FTP folder. I have a text file to be processed as XML messages in XI. The problem is, it's not processing. The text file goes straight to the archive folder without processing it to an XML file. It's not in sxmb_moni and smq2. I'm not sure what happened. It was being processed before.
Thanks.
Regards,
IX

Check your sender file adapter status from the Communication channel monitoring on your Runtime Workbench.
Thanks,
Pooja Pandey

Table Names of Processed XML Messages

Hi ALL,
We are facing space problem in PRD box with one of our client, due to increase in large number of Messages .
Our basis tryed to do archiving, but endup with no luck.
Could any one tell us in which tables processed idoc xml messages will get stored.
.Any help is highly appreciated.
Kind Regards,
Vijay

Hi,
you should not delete XI Message directely from database table. Please schedule archive or delete jobs. If you never define which interface should be archived, it could NOT be done afterwards. This is also documented clearly on the help.sap.com. What you could do is delete the old messages to free table space. You could configure now interface which should be archived, in this case the message processed in XI in future could be archvied.
XI message is actually stored in different tables,
SXMSPMAST, SXMSPMAST2      XML Message master Table, contains runtime information on XML messages processed by XI; in this table you can find all the information that is visible in SXMB_MONI.
SXMSCLUP     XI Message Payload Tabelle
SXMSCLUR     XI Message Payload Tabelle
SMPPREL3     this table contains information about interfaces; here you can find information on sender (party, service, interface and namespace) and receiver (party, service, interface and namespace) as well as information on maps (their GUID and name as well as namespace).
SXMSPFRAWH     Performance Head Data, Audit Log,
SXMSPFRAWD     Performance Data, Audit Log
There are could be more tables used to store information about XI messages, as I mentioned don't modify database table by your own risk. You will not get support by SAP, it could cause fatal error.
regards,
Hai

XML messages eamil (Problem)

http://www.flickr.com/photos/25222280@N03/
Hi, All
We are using XI 3.0 Support package: 20
I can expalin the probelm step by step please help me about thanks in advanced
Step: 1
I am trying to get XML message from XI system messages shows in SXMB_MONI with some read flags
Step 2
SAPconnect working fine... I can send email anyone internaly through so01 so connections works
Step 3
Goto ALRTCATDEF and create alert category which is XDV_ALRT then goto RWB and click Alrt configuration, select classification and click Roules its does show my user ID and Alert cagt. there
Then I received XML messages my eamil with Attachment file and subject: Alert, which is I didn't define anywhere... I didn't know where this messages comes from?
Step 4: I put some others users using alrtcatdef tr such as make_m and amer_J and my user id in it as well but only I am getting these messages not others I double check user profile and roles all pretty much same look like...
My simple question is that I want to setup XML messages to some users through email thats it
I am sending some screen shot I thing someitng is missing or I am getting some wrong please look at this
http://www.flickr.com/photos/25222280@N03/
Thanks

Hello Aamir
Thanks for very fast responsed, Aamir when I goto SXMB_MONI first screen comes up "Monitor processed for XML messages"
First Screen
view is = Defaul
Status group is empty
Standard selection criteria (from date to date = I just define date couple of days ago!)
Sender and receiver all fields are empty
2nd Screen
When I execute its shows xml messages with black flag and Red dot all Red dot comes with attachemnt eamil
in this screen they have some button like "display", "error information" "referencing infromation" "reset" 'shows"
with Error look like that before I click on it
@5C\QSystem Error - Restart Not Possible@ @5F@ 02.04.2008 02:14:39 02.04.2008 02:14:43 MOL_NQA tp://www.abc.com/MOL/OnlineStore O_msgIF_CHECK_BILLING
dbcinqa http://www.mitel.com/MOL/OnlineStore I_msgIF_CHECK_BILLING "Current Status" @5F@ @5F@ @5F@ 6
When I click on that 3rd screen comesup with some bottons like windows1 windows2, ....
with RED error messages in right side....
that error messages comes with my attachment....
I didn't see anything scenarios, how may I check that where is it? please let me know
My name is also Aamir
Thanks

Handling xml message of size more than 100mb in SAP PI 7.1

Dear Experts,
Is it possible for PI to pick-up and process a XML message of size more than 100 MB in PI 7.1 EHP-1?
If yes, can you please let me know how to handle it?
Thank you.

Hi Saravana,
it is not a best practice to more than 100mb..
you can increase below parameters and so that you would be able to process for the best..
u2022     UME Parameters : May be we need to look into the pool size and poolmax wait parameters - UME recommended parameters (like: poolmaxsize=50, poolmaxwait=60000)
u2022     Tuning Parameters: May be we need to look/define the Message Size Limit u201Clike: EO_MSG_SIZE_LIMIT = 0000100u201D under tuning category
u2022     ICM Parameters: May be we need to consider ICM parameters (ex: icm/conn_timeout = 900000. icm/HTTP/max_request_size_KB = 2097152)
Thanks and Regards,
Naveen

XML message is not processed in SXMB_MONI

In SXMB_MONI txn code (PI 7.0),we are not able to get updated with any XML messages from a folder on application server what could be a reason for this problem..can we see the log details of the same from anywhere .How can we rectify this problem
I would appreciate all your help

In SXMB_MONI txn code (PI 7.0),we are not able to get updated with any XML messages from a folder on application server what could be a reason for this problem..can we see the log details of the same from anywhere .How can we rectify this problem
I would appreciate all your help

SXMB_MONI : Error in Persistence Layer : XML Message Not Found

Hi Team,
There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
Any help on this is highly appreciated.
Thanks & Regards,
C V Jayachandra

Hi,
Please refer the below discussion
SXMB_MONI - Error accessing persistence layer
regards,
Harish

XML message ok in SXMB_MONI, but not delivered

Hi there,
I am new to PI and have a question regarding monitoring of an interface.
We have a problem that a SOAP request doesn't reach its receiver.
When I have a look at SXMB_MONI the XML message has status "successfully processed" (race flag as indicator).
But if I check on [http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp|http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp], there I see that the message for the same interface has status "not delivered".
It shows me the following error message:
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
How can I investigate more on this to find out why the interface doesn't work?
I have the impression that the monitoring of PI interfaces is quite unstructured.
Is there a good tutorial/blog which shows where to look for this information?
Thanks in advance!

In the message monitoring I've messages with status 'Not delivered'.
If I display them, I just see error messages like
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
Adapter Framework caught exception: null
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
How can I see more detailed error messages???

He XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side

hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur

XML message going for sheduldeld for outbonding process

HI,
I am new to XI..during SAP to SAP scenario i am getting message in sxmb_moni XML message schedule for outbounding process.
Can anyone tell how it can be converted in checkered flag.

> Hi Sunil,
>
> >>>>So its showing RUNNING status in queue details.
> just have some patience..
>
> Regards,
> Udo
LOL.
Finally some humor on SDN forums.
Henrique.

No show message in monitor for processed XML messages

Hi,
I get the document 'VALIDANTING A CONNECTION BETWEEN SAP R/3 AND SAP XI WITH RFC' and following the steps until step 9 it's ok but I can execute the step 10 I get 2 problem:
First Problem - I dont know where see the ABAP code STFC_CONNECTION, How do you know?
The Second Problem is the step 11 the system not show message and the documentation show message.
Please Help-me.
Any Ideas ?
Regards.
Mattos.

Hi, Ashish thanks for anwser my doubt.
So, the step 10 is "10. Refer to the following ABAP code snippet for executing the STFC_CONNECTION programmatically
instead of using the user interface shown above.
Call STFC_CONNECTION to send/receive request/response to/from XI***
DATA: v_msg_text(80) TYPE C. "Message text
CLEAR v_msg_text.
CALL FUNCTION 'STFC_CONNECTION'
DESTINATION 'XI'
EXPORTING
requtext = 'REQUEST_TEXT'
EXCEPTIONS
communication_failure = 1 MESSAGE v_msg_text
system_failure = 2 MESSAGE v_msg_text.
IF SY-SUBRC NE 0.
**Write your code here**
ELSE.
**Write your code here**
ENDIF."
and the setep eleven is "11. Check the Integration Engine monitor for the processed XML messages (SXMB_MONI):
Shows Sender Interface:"
But I not see messege in my Monitor.
Other doubt in step 5 the document order to create the RFC_Sender Communication Channel, this configuration have the parameters PROGRAM ID (mandatory), we dont have any idea what input there, Can you Help-me? How can find this parameters? in document we have the exemple INTEGRATION_SERVER.
Thanks.
Regards,
Mattos.

After I make minor changes to my collections, the following message appears :Sorry, this page is currently being edited. Please try again later. It sometimes takes hours for me to be able to edit site again.

After I make minor changes to my collections, the following message appears :Sorry, this page is currently being edited. Please try again later. It sometimes takes hours for me to be able to edit site again even if the only thing I'm changing is a description.

Greetings;
Take a look at this related discussion. Others have been experiencing the same issue. I hope that this discussion will help you resolve your issue. All the best...
https://discussions.apple.com/message/17781516#17781516
Syd Rodocker
iTunes U Administrator
Tennessee State Department of Education
Tennessee's Electronic Learning Center

File is picked up but never show the XML message in SXMB_MONI

All,
I am working on the file to SAP integration scenario issue. High level interface design is,
File Adapter picks the file from XI application server and send the data to SAP Application system(in this case ECC) to post data as per the business requirement. The scenario is working perfect since long time and we don't have any issues as yesterday.
This morning, I noticed File adapter picks the file and moved the file to archive folder (based on settings in communication channel) but XML message never shown in SXMB_MONI. I had a look into the RWB to check status of the communication channel. every thing looks fine from communication channel monitoring.
Did any one come across this scenario? What else to be checked to move forward on this issue?
Thank you..
Anil

Hi Kumar,
The error message indicates the URL the adapter engine is using to send the data to the integration engine is wrong. The last part of it has somehow become truncated: "type=ent" should read "type=entry".
In the SLD lookup the XI technical system, under the integration tab check the setting for the "Pipeline URL" field, you should see something like: http://HOST:PORT/sap/xi/engine?type=entry if not, you can correct it.
Then go to the XI ABAP client using SAPGUI and in transaction: SXMB_ADM, option "Integration Engine Configuration", check that Corresponding Integ. Server has the same URL, if it has something of the sort of: "dest://...." check in transaction SM59 for that RFC destination name, it should have the correct URL. Also in the specific configuration (using the same transaction), check the RUNTIME->IS_URL parameter value.
Hope that helps.
-Sam.

Problem in ABAP Proxy(sometimes XML Messages are not being created)

Hi,
I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side. I called my proxy method in BADI : DELIVERY_PUBLISH.
And after calling the method, I used commit work also.
But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
I am unable to understand why this inconsistency.
Could you please help me out, do I need to take any more precautions.
Thanks,
Sandeep

You mean you can't find any message in SXMB_MONI of your ECC or is it XI where you can't see message?
If you have not checked in SXMB_MONI of ECC then may be messages are created but they are going into error and that's why you are not able to see any message in XI.

SXMB_MONI-- Processing Statistcs - XML messages in "Being Edited" State

Similar Messages

Maybe you are looking for