Sync Cancelling at the Last Step after Loading iOS 5

I recently updated my iPhone 3G S to iOS5 but when the phone was restored following the update only about 2/3 of my music had synced with my phone. When I try to sync (via WiFi or cable), the iPhone gets to the last step (Step 6 of 6), begins to sync the music and then sayings cancelling sync when I haven't touched anything. When I look at my phone after attempting to sync it, I can see the songs that have not sync'd on my phone, but they are in a more transparent gray (rather than the typical black lettering) and I am unable to play them.
I have already tried restoring my phone again, the issue has persisted. I am unsure if it is relevant, but I have a 13" MacBook Pro. Thanks!

Hi Roberto,
Thank you very much for your prompt response the issue seems to be very close to what is described in notes
· 1624426
· 1664394
Unfortunately We have tried both notes i.e. our Administrator verified that port is 80 and we have tried to use the ‘DNS-hostname:80’ and the problem still occasionally appears (I stress occasional and from specific end user’s PCs).
Any other ideas?
Thank you in advance.
Kind Regards
Mike

Similar Messages

My iPad gets stucked in the last step of the sync with the computer.

When connecting the iPad to the computer the iTunes starts, reconizes my iPad and starts the sync of the iPad.
It syncs the contacts, calendars, pictures, music, etc, but in the last step (7th; "finishing Sync") it stucks and stays for ever without finishing.
I cannot load a previous backup because as soon as I connect the iPad to the computer the Sync process starts and no button is available.
I've tried to load again iTunes to start from the begining but it is still saying the same, that the Sync process is finishing and is blocked there.
Any help?
Thanks a lot.

Hi Demo,
I've tried what you say but, if I'm doing it right, it doesn't work because after rebooting it goes again to syncing and stucks on the last step.
Nevertheless let me check if I'm doing it right; When you say "Before you restore from the backup, quit iTunes, ...." you mean "Before" or "After" because I don't understand how I could reboot the iPad BEFORE I restore from the Backup if it is already restoring.
Just let me write down the procedure to check that it is the right one:
1- I launch iTunes (iPad not connected) and go to Edit>Preferences>Devices, and I check the box to Prevent the iPad to syncing automatically. I click OK.
2- I quit itunes.
3- I connect the iPad to the computer.
4- I launch iTunes.
5- I go to Restore from Backup
6- Restore from Backup is finished
7- I quit iTunes
8- I disconnect the iPad from the PC
9- I reboot my PC
10- I reboot my iPad by holding down on the sleep and home buttons... iPad stars.
11- I connect the iPad to my PC.
12- I launch iTunes
13- I click on sync button.
If the procedure is right then my problem must be another one because when I do it and it starts syncing again the same problems comes back again and the syncing never stops at the last step.
Thank you anyway for your time and support.
Best regards,
Francisco

Downloaded new ios7 and new itunes 11.1 and now iphone 4 won't finish syncing - just stays on last step and never finishes or cancels on its own. Tried reinstalling itunes with no success.

Downloaded new ios7 and new itunes 11.1 and now iphone 4 won't finish syncing - just stays on last step and never finishes or cancels on its own. Tried reinstalling itunes with no success.

I have the same problem.. latest version of iTunes (11.1.5) and latest version of ios (7.1) but it gets stuck at "waiting for changes to be applied" and I can't cancel the sync manually. It doesn't cancel on it's own either (at least not the 8 hours over night that it was syncing) and if I unmount the phone then the phone keeps the sync going (the little spinning arrows in the upper left corner) and doesn't recognize that it's been disconnected..
I've tried restoring the phone (with little success, managed to get one more song on there) and syncing over wi-fi but nothing seems to work. Any thoughts, anyone?

I'm trying to synce my iPhone 4s but it isn't completing the last step (step 7).

I'm trying to synce my iPhone 4s but it isn't completing the last step (step 7). It says "waiting for items to copy." The stripped bar just continues to move to the right. Even if I try to cancel it stalls there too. I have to eject the iPhone from the computer to make it stop.

See the "Update your device using iTunes" section in:
<http://support.apple.com/kb/HT4623>

When i connect my ipod touch to the computer and it brings up itunes, and it starts syncing, it just stays on the last step(6) and I can't download anything else to my ipod.

I connected my ipod touch to the computer. When it brings up itunes and start to sync, it stalls at the last step (6). This keeps me from being able to add other songs from my library to my ipod. I'm very new at this and maybe just don't understand how it works.

Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

Why is my syncing (ipad2) seem to be stuck on the last step?

Why is my syncing (ipad2) seem to be stuck on the last step?

Perform a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

I just downloaded a new version of OS7 to my iphone and when I try to sync with my mac book pro it will not finish and just spins around at the last step. anyone help?

I just downloaded a new version of OS7 to my iphone and when I try to sync with my mac book pro it will not finish and just spins around at the last step. anyone help?

It was telling you that you needed Mac OS 10.6.8 or later, not itunes 10.6.8
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later"
http://www.apple.com/iphone/specs.html

IPad / iTunes sync gets stuck at the last step

Whenever I sync my iPad and iTunes, it doesn't complete the last step and gets stuck on "Waiting for items to copy".
First it was with "Step 7 of 7: Syncing Genius data to iPad", so I deleted all Genius stuff and links to it. Since then it gets stuck with: "Step 6 of 6: Synching Artwork to iPad" and just hangs with it forever.
I am an Apple newbie, the iPad 3 is my first Apple appliance. What can I do to avoid having to exit syncing by unplugging the iPad? (NB iTunes runs on a PC with Windows 7.)
Thanks, Joseph

It may be that you have a couple of problem files. I have a similar issue, where some music, that I purchased via iTunes, won't sync on to my iPod.
I'd suggest that you start my turning off as much syncing as you can in iTunes. Use iCloud to transfer your calendars, contacts etc.
Then try syncing some of your music and other media manually. If there are errors, then iTunes should flag them up by saying "Could not copy xxxx because ..."
Personally, I only sync media manually, as I don't always want iTunes to perform a full sync every time I start it up. As my iPad is set to sync wirelessly, it connects to iTunes every time I open it.

Problem at the last step in LSMW Direct I/P Method

Hi all ,
I am trying to create the ROUTING using LSMW direct input method .
After executing the last step (Start Direct Input ) .. I am getting the Following Information as errors .
               Data Transfer of Routings via Direct Input                                                                  1
    Error_di_exp         From    To      Obj   Index       Plnnr
E    2     2                             O     0000000001
E                           1     1      A     0000000001
E                           2     2      O     0000000001
C\ 045
   You cannot edit the task list object with activity type
C\ 045
   You cannot edit the task list object with activity type
Please let me where could be the problem .
Thanks for any suggestions .
Regards,
Raj

go to CA01 and try loading one routing manually and you will understand whats the error.
discuss activity type restrictuing to be laoded with Functional consultent.

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
iPad2 sync is fine.
Any ideas to solve it?

This sounds like a problem you should take up with Apple Customer Support.
The other users like yourself here are not going to be able to help you with this problem.
Allan

Log-on freezes at the last step

Hi,
We use BPC 7.5 NetWeaver version SP08.
We have noticed that occasionally some of our end users are experiencing the following problem:
When they try to log on either through the Planning and Consolidation for Office Client or through the Planning and Consolidation Administration Client the log-on process freezes at the last step where the connection bar is shown i.e. after they input their credentials and press Next button.
It should be stressed that this problem appears occasionally and only on specific end usersu2019 PCs.
I would very much appreciate any help.
Thank you in advance,
Mike

Hi Roberto,
Thank you very much for your prompt response the issue seems to be very close to what is described in notes
· 1624426
· 1664394
Unfortunately We have tried both notes i.e. our Administrator verified that port is 80 and we have tried to use the ‘DNS-hostname:80’ and the problem still occasionally appears (I stress occasional and from specific end user’s PCs).
Any other ideas?
Thank you in advance.
Kind Regards
Mike

Import Wizzard Open on the last step

Hi
I'm having a problem when trying to load data.
When I select the import package it opens the wizzard incorrectly. It seems to be opening on the last step.
It does not open on the first step so that I can choose the file to import.
Can someone please help. Why isit doing this?

Hi
If I try look at the package, try modify the stanadrd "import" I'm receiveing this error
Exception Text **************
System.InvalidCastException: Unable to cast object of type 'System.Xml.XmlText' to type 'System.Xml.XmlElement'.
   at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.LoadDetail(String strXMLString)
   at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.GetPackageDetailfromServer(String strPackageName, String strPackageFilePath, String strTeamID)
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.PackageListClickEvent(String strPackageID, String strPackageFileName, String strTeamID)
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.SetStartUp()
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.frmMain_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
There seems to be something wrong.

Im trying to burn a lp from itunes, but it keeps cancelling at the last minute and saying error 4000

im trying to burn a lp from itunes, but it keeps cancelling at the last minute and saying error 4000

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
-Griff W.

I'm unable to unlock my Iphone 4 i have forgotton the passcode i have tried syncing it at the last place i did. I cant turn the icloud of either so my phone is useless at the moment. How Do i unlock it if i dont have a passcode?

I'm unable to unlock my Iphone 4 i have forgotton the passcode i have tried syncing it at the last place i did. I cant turn the icloud of either so my phone is useless at the moment. How Do i unlock it if i dont have a passcode?

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4

Update 4.01 asks to update, I say yes it appears to update then in the last step it goes back up to the update center and cannot connect, the update does not take effect and it keeps asking

I allow update 4.01 to update got thru all the steps and at the last step it goes back out to the update and cannot connect, the update does not take effect.

Sign out of your account on the iPad, restart the iPad and then sign back into your account.
Settinsg>Store>Apple ID - tap the ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
After restarting go to Settings>Store and sign in again.

Sync Cancelling at the Last Step after Loading iOS 5

Similar Messages

Maybe you are looking for