Sync problem with OVI / Outlook of the notes with ...

Hello,
I'm desperate and close to open the gaz :-). I used to sync my Outlook notes with all my former phones with PC-suite. Since I have a new N8, I'm forced to use OVI instead of PC-Suite as it doesn' support this model phone. Everything seems to be possible in the set up but the sync doesn't work and always return an error code : 83860026. It even ask to reinstall Outlook which took sometime but never changed anything. As it might be due to other unknown variables, I tried the same Outlook database with other PC with XP or W7, office 2003, 2007 and even 2010 and the sync always fail with the same miserable error code. I'm fairly suprised to see this problem still there since I gave up, years ago, to use OVI because of this. My N97 and 6303 do the same. Can someone bring some good help to resolve this annoying trouble please?
Thanks in advance, Fabrice

Dear Satari,
thanks a lot for the advice but in the meantime I found another post stating that version 7.1.40.6 PC-Suite works great with the N8. I kept it in my archives and I can state that it WORKED GREAT in less than 5mn!
So far your suggestions might resolve the OVI sync problem but I have no more courage to follow it. I was yet using the latest version of OVI and W7 and Office2010.
However, if it would work, I would recommand the OVI software team to find out why one of their software work very fine while the other seem to cause trouble to the entire world. I could not find a single complain about PC-Suite while the support discussion ifs full of OVI reported troubles for the last 2,5 years. What a shame!
Furthermore, it is unacceptable that NOKIA force their client to use OVI with any phone while they know this software is so unstable. I would add that the "gift" is even worst when it comes to the most expensive product of the range. As the general manager of a software company, I have learnt that it is never good to insist with a product when the development team is unable to cope with bugs and troubles. Whatever the cause could be, it is better to restart from scratch and get rid of EVERYTHING and EVERYBODY involved in the mess! Please Mr Nokia new president, act positively and do your homeworks in the interest of your clients and sharholders. Additionnally, if I had not spoken English I would still be on the road side! Thanks in advance to care of us MORE.

Similar Messages

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help?

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help? Any other suggestions other than going to an Apple Store?

Back to life**
Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
Also if you have an experience to share then do share it as well please.
Peace

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

E-mail that received in outlook from the Notes address error code:0x80070005-00000000-00000000 occurs

When reply to the e-mail that received in outlook from the Notes address, error with an error code：0x80070005-00000000-00000000
occurs (please refer to attachment),
and we could not send mail. (Error details: Your message did not reach to the intended recipients, below email could not be delivered, please inquire to Network manager) When Created new
and sent, e-mail sent became possible. Also, there was no mistake of e-mail address.
Is there an alternative that avoids the current problem?
If I perform a new email, it is possible to send.

Hi,
Which type of email account are you using?
Have you checked this issue from web access?
If the email address is saved as a contact in your Outlook, please try to delete it and then try to reply to the email to test if the problem persists.
If you are connected to an Exchange server, please have a look at this KB article and check if it helps:
http://support.microsoft.com/kb/195671/en-us
Best Regards,
Steve Fan
TechNet Community Support

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

Read these.
http://support.apple.com/kb/HT1431
http://reviews.cnet.com/8301-13727_7-10330118-263.html

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

tammersalem wrote:) <-HDMI-> (HDTV)
My main concerns are:
-If I use iTunes on my main computer, will it then be available to Apple TV?
-If I use Apple TV to download will it be available to my Main computer?
-Can the Apple TV use a media server for storage over LAN (using NTFS Samab or otherwise)?
Basically iTunes feeds AppleTv with media either syncing (copying to it) or streaming live.
Media must be compatible with AppleTV.
AppleTV requires a proper iTunes instance running - it cannot access a NAS directly.
If you store media in a folder on a NAS and it's part of the computer iTunes library (just stored on the NAS vs internal/external drive), then when running iTunes makes this content available to AppleTV.
Data will travel:
NAS > network > iTunes > network to AppleTV
As the path is potentially slower than internal/external attached drive > iTunes > network > AppleTV, it may or may not work robustly for streaming.
If AppleTv is set to sync (it can also stream in this mode), when you purchase direct on AppleTV, the media should sync back to where the itunes library is stored (via iTunes) to keep things in sync and to allow you to backup the media.
You cannot drag/drop media to/from AppleTv across the network, nor can it directly access storage itself - iTunes is an essential cog in the wheel.
The majority of commercial 'in-built iTunes media servers' will not work directly with AppleTV as it has to be 'paired' with iTunes by entering a numerical code in iTunes and does not simply see 'shared libraries'.

Windows XP - ok with 4.6.21 but not with 4.7.25 (getting_started example)

I'm new to this.
I have installled BD 4.7.25 and 4.6.21 from the msi onto my Windows XP (SP3) m/c
When I compile the simple examples 'getting_started_examples' they
work with 4.6.21 but not with 4.7.25
The error happens in 4.7.25 when the dbp->open() is called:
/* Now open the database */
ret = dbp->open(dbp, /* Pointer to the database */
          NULL, /* Txn pointer */
          file_name, /* File name */
          NULL, /* Logical db name */
          DB_BTREE, /* Database type (using btree) */
          open_flags, /* Open flags */
          0); /* File mode. Using defaults */
The error message is:
illegal flag specified to DB_ENV->set_encrypt
Any suggestions why this is happening?
I am using lcc-win32 as the C compiler.
Regards
David

Hi,
You need to make sure you are using the dll of db4.7 rather than db4.6. Rebuild db4.7 dll and the example program, and make sure the db4.7 dll is used rather than that of db4.6.

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD?

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD, what do I do?

Hi, mmayers.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting. The second article covers the recommended settings for current Wi-Fi access points.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

I bought pdf converter pro but when i convert to excel it only converts the columns with figures leaving out the columns with quantity descriptions

i bought pdf converter pro @$29.99 but when i convert to excel it only converts the columns with figures leaving out the columns with quantity descriptions

Contact the vendor of the product for support.

How can I add "Edit with Photoshop CS5" to the Edit With options?

How can I add "Edit with Photoshop CS5" to the Edit With options?

I think it has something to do with the order in which the PSE and PS are installed on your machine.
For me, I can see option for editing in photoshop both in edit menu and from the action bar. I probably had Photoshop installed on my system before PSE

I can use iMessage with all iPhone uses except for ONE person. That person can use iMessage with all other users, but not with ME. What's the problem???

I can use iMessage with all other iPhone users that I communicate with, except for ONE person. When I send to that person, it always goes through as a text message. This person can use iMessage with pther people, but when they send me a message, it always goes as a text. Why can we both communicate with other people using iMessage, but not with one another?

Hi Russell,
1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk. Mac OS X (10.4.4)

Sync problem in OVI Suite 3.0.0.284

Working with nokia 2630 for a long time and since a few weeks with ovi suite 3.0.0.284.
Also work with Outlook 2003. Ovi suite syncs my appointments en contacts between Outlook and 2630. This works fine, until this morning.
The problem is a winter / summer time problem, imo.
Description:
I've made an appointment in Outlook.
Startdate 29-01-2011 from 9.00 - 12.00, every 5 weeks with an enddate on 18-06-2011.
Then an OVI sync started, which ends as usual in a correct way.
What shows the result on the 2630:
date 29-01-2011, 9.00 - 12.00
date 05-03-2011, 9.00 - 12.00
date 09-04-2011, 8.00 - 11.00
date 14-05-2011, 8.00 - 11.00
date 18-06-2011, 8.00 - 11.00
The last 3 apoointments need to be manual corrected to 9.00 - 12.00.
When summertime starts only systemtime is updates and not the appointment times.
I hope I made myself clear enough to let you solve this application failure.
Kind regards
Gerard Roelands (groelands)

Could you please provide more information on this?
1. which GMT seetings you are using for your phone and system?
2. Are you using any daylight savings seetings for your phone, system and outlook?
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Address Book Sync Problems - 8530 and Outlook 2007

This has been a nagging problem for me for quite some time. Here's my current status:
Curve 8530 on Verizon Wireless
Access to Corporate resources and email via BES
I also access Gmail from the device
Right now I am not synching over the air - that has never worked. I'm using Desktop Manager, and recently downgraded to Version 5.01. When I connect the device and configure for Address Book sync the application starts the process, then craps out without synching. I've rebooted the PC, reloaded the application without success.
And right now the device's address book is blank. Any ideas?

Hi and Welcome to the Forums!
Given that you are on BES, why in the world are you putting up with it's non-functionality? With BES, you should be receiving Over the Air (OTA) sync of email, contacts, calendar, tasks, etc...no need whatsoever to synchronize to Outlook via USB tether. If that is not working, then you should do one of two things:
1) Talk to your BES admins and have them get it working properly for you...you are missing a lot!!!
-- OR --
2) Talk to your carrier about changing your data plan and dropping BES -- you are paying extra for a service that you cannot even use!!
Once you decide which path you wish to pursue, let us know.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sync problem with OVI / Outlook of the notes with ...

Similar Messages

Maybe you are looking for