Sync some podcasts, not others?

I have just added two podcasts to itunes windows, and they download fine to itunes on my xp pc, but they do not Sync to my ipod (touch). If I drag/drop them to the ipod, it acts like it is copying them, but I do not see them in the ipod anywhere.
I have other podcasts that work fine, but they are both pay-for through audible. These two that I just added are my first 'free' ones that I found on the net.
one is:
commoditywatch.podbean.com/feed
the other is:
feeds.feedburner.com/ETFDigest-Public
Any ideas?

OK, i figured out how to do it. here's how:
when i plug my iPhone into my computer, there is the menu on the left that shows both the contents of my iTunes library AND my iPhone. i had been dragging and dropping from my iTunes library to my iPhone and it only worked for some. what i did that worked was:
1. clicked on my iPhone on the left side of the menu. that brought up a screen on the main part of the window that has tabs at the top that read "Summary Info Ringtones Music Photos Podcasts Video".
2. I clicked on "Podcasts". Then, all i had to do was...
3. Click "sync 'you choose' episodes of 'all podcasts'" and then
4. Click apply at the bottom of the screen.
that worked for me. hope it works for others that are stuck.

Similar Messages

  • Why do some podcasts not play on my touch?

    I download podcasts with Itunes. When I sync to my 1st Gen Ipod Touch most play fine, but some will not play on the touch. I get a message that there are some podcasts that will not play on my touch. They are all downloaded with Itunes and in the MP4 format. There are other shows in the same "sieres" that play just fine. But some episodes don't sync. They play OK in Itunes. How do I get them to sync to my touch?

    Hi AC,
    Thanks for that.
    I have Apple TV 1 & only use Handbrake.
    An example of 2 problem videos:
    High Society
    MPEG_4 (Base Media / Version 2): 1.09GiB
    1 Video stream: AVC
    1 Audio stream: AAC
    Encoded date: UTC
    Tagged Date: UTC
    Writing Application: Handbrake 0.9.5 2011010300
    Video 1290kps, 720*416 (16:9), at 25 fps, AVC ([email protected]) (CABAC / 4 Ref Frames)
    The Marine
    MPEG_4 (Base Media / Version 2): 1.53GiB
    1 Video stream: AVC
    1 Audio stream: AAC
    Encoded date: UTC 2011-11-29
    Tagged Date: UTC 2011-11-29
    Writing Application: Handbrake 0.9.5 2011010300
    Video 2222kps, 1280*688 (1:860), at 23.976 fps, AVC ([email protected]) (CABAC / 4 Ref Frames)
    To a layman like me, these specs look similair to specs of my non-problem videos.
    e.g.
    The Pawnbroker
    MPEG_4 (Base Media / Version 2): 764 MiB
    1 Video stream: AVC
    1 Audio stream: AAC
    Encoded date: UTC
    Tagged Date: UTC
    Writing Application: Handbrake 0.9.5 2011010300
    Video 794kps, 512*384 (4:3), at 23.976 fps, AVC ([email protected]) (CABAC / 2 Ref Frames)
    harryfromdocklands

  • Some Podcasts Not Downloading - Error 8006

    I am running iTunes 7.4.2 - for some reason, some (but not all) of my podcasts suddenly will NOT update. Instead they have an "!" next to them, and when I click on the exclamation point, I get the following error message"
    "There was a problem downloading (name of podcast). An unknown error occurred (8006). Please check that the URL is correct and the connection to the network is active and try again."
    Any idea what this could be? I just want to update my podcasts and this is driving me crazy!
    Thanks.

    Hhhmmm!
    That rules out my thought that perhaps the Podcasts had changed it's feed. Sometimes they do and then it is simply a matter of accepting two different feeds.
    It may be a temporary glitch. Give it a day or two and if you still have the same problem, try ocntatcing the Podcast's producer to let them know of your problem. It may be something they can fix. (Apple are not usually involved in Podcasts.)

  • Some Podcasts not working since upgrading to 1.2

    Ever since I upgraded my IPOD to version 1.2, I have found that some podcasts which I subscribe to no longer work. It downloads and transfers to my IPOD OK, but when I go to play it my IPOD shuts down then eventually restarts. So far it seems to happen with KCRW's the Treatment, Creative Screenwriting & WFUV podcasts. I know I could probably restore it back to the previous version but I'd rather not as I have already paid for a game which I know only works with the new functionality (plus I like playing it). Anyone else found this?

    There's another thread about this somewhere - many people have had this problem. I've had it with the Creative Screenwriting podcasts, which are the only ones to which I subscribe.
    The thread proposed a workaround - start the podcast not at the beginning but one second in. You have to select the podcast, then I think do a Get Info or something - there's some way to find Options, then Start Time, then input 1 or 2 seconds in (with the CS Podcasts, this is fine, since Jeff tends to yakk on for at least two minutes before the interviews begin!)
    I've not yet tried it, but it seems to have solved problems on the other thread, accepted as a workaround until Apple fixes it.

  • I only want sync SOME videos, not all, is there a way to do it ?

    Hello guys!
    I want to sync only SOME videos, not ALL... is there a way to do it ? i tryed to did a "smart folder" with iPhoto, for select last 6 months videos, but when i try to sync to iPhone, it doesn't sync none video, the only way is selecting "incude videos" (but i wont want to, because it will sync ALL videos, i only want some of them)
    Thanks!
    System:
    Yosemite
    iTunes 12

    Hi,
    Unfortunately this feature is not included in Firefox at this point, but you can suggest it by following the instructions below.
    The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
    If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.
    Hope this helps!
    Curtis

  • IMAP Working for some but not others

    I am having the issue of imap working for some users and not others. I have for instance 2 users both accounts the same. One account I can link via imap the other I can not. Both have the same group memberships, both are in the same post office. Everyone has imap access I have no restictrions set. Any idea where I should begin to look. The message I am receiving on the account the can get in is: user does not exist.
    Thanks

    gator17,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Open in Camera raw grayed out for some tifs not others, bridge

    I searched but could not find a solution. CSR. PC. Windows xp. In CS4 Bridge the option to open with Camera raw is grayed out in the file menu for some tifs and not others - It shows up grayed out on the file menu, but doesn't show at all when right clicking,  even with the files where open with camera raw is not grayed out in the file menu. I have purged the cache, deleted all temp files, closed both bridge and photoshop and still I cannot open the tif in camera raw. It is grayed out. If I go to the pic I touched up yesterday the option is not grayed out. Does anyone know how I can fix this?

    RJ Dougall wrote:
    My intent is to batch process in Camera Raw -- my preferences have always been set to use camera raw for TIF and JPG files, and I have never had a problem accessing Camera Raw either directly in PhotoShop itself, or Bridge.
    Please e-mail me a copy of your response to [email protected]
    Uh, this is a forum...not an email tech support organization...
    As for your issue, it's simply not clear what you are doing or what issue you have. Can you not open the scanned images via Camera Raw from within Bridge? If you can then you will need to go through each image and adjust the ACR settings before you would be able to process them. Depending on how you set up your actions, Photoshop's Batch may or may not catch settings...that part is pretty complicated.
    Also, I would question your use of JPEGs vs TIFFs. I would suggest scanning as 16 bit TIFF and running those through Camera Raw...you will be loosing a lot to scan into 8 bit JPEG and then re-running through Camera Raw. You really want to be sending ACR 16 bit images...

  • IChat Video Audio: works with some iMacs not others

    I have this strange problem.
    I can chat with everyone.
    I can video and audio with some but not all.
    A person I can video or audio chat with can video and audio chat with our mutual friend.
    I cannot video or audio chat with the mutual friend.
    All machines are iMacs OS 10.4.10 with latest updates.
    There was no problem until 2 weeks ago.
    Does anyone have a suggestion as to how to solve this problem?
    thank you in advance.

    Presuming all have got their System Preferences > Quickitme > Streaming set to 1.5Mbps and restarted IChat then...
    Change the way the ports are opened in the routing device
    http://www.ralphjohnsuk.dsl.pipex.com/page15.html#CertainBuddy
    5:02 PM Thursday; August 23, 2007

  • ITunes 10.2 not syncing some podcasts

    iTunes 10.2 tells me that episodes of Derren Brown's Science Of... were not copied to my iPhone because they "cannot be played on this iPhone",
    However the last build had copied these over happily and they played just fine...
    A further weirdness was that it initially reported two episodes that could not be copied to the iPhone. When I unchecked these and synced again it decided that another episode was now incompatible, and it then repeated this process until I had unchecked all the episodes of the series.
    So... before I file a bug report, can anyone else confirm they are seeing similar odd behaviour with the latest build?
    tt2

    Further investigation shows the podcast subscription has been renamed and the feed has changed (it is now split in three - grr) and all the episodes concerned reissued at higher/non-iPhone compatible quality.
    I now have unwanted, duplicate, HD(ish) versions, but at least I now know why it was happening, though not why the warnings came one at a time instead of all together, though I suppose the new episodes might have been downloading in the background while I was still puzzling over the problem.
    tt2

  • Can't sync some podcast episodes

    Certain podcast episodes will not sync to my 5th generation iPod. My iPod was setup to sync automatically and the podcasts were setup to sync all episodes of all podcasts, but there are 4 or 5 episodes that will not sync to my iPod. Other episodes of the same podcasts do sync properly. I changed the settings to manually manage my iPod, but when I dragged these podcast episodes from my iTunes podcast folder to the iPod icon the + sign never appears and if I try to drop the episode into the iPod's podcast folder it still refuses to copy. What's broken?
    Powerbook G4   Mac OS X (10.4.9)  

    The files might be corrupted. Have you tried downloading again?

  • JFileChooser (again!) slow in JRE 1.6.14 on some machines, not others

    I am running ImageJ (from the NIH) on several of our machines and on some machines JFileChooser is lightning fast, while others exhibit the same slowness spoken of in another JFileChooser thread that is now in a locked state. We open large image files (tif, png) located on our SAN and from the network traffic I see in Windows Task Manager while opening a folder containing the images I would guess that JFileChooser is actually opening the files (intentionally or not), not just obtaining a folder listing. It's similar to the same issue of opening a large folder of images with the view set to thumbnails - it takes about the same amount of time. I have tried the suggestions in that thread to no avail - the environment the machines are running is:
    Windows XP SP3
    Java JRE 1.6.0_14
    Can anyone comment on what JFileChooser is doing and how I can get it to stop this? Is it a Windows environment setting so that the native API calls made by JFileChooser will behave differently? Thoughts?
    Thanks,
    Tom

    I can't be absolutely sure, but we have several seemingly identical machines used for the purpose of reading medical images and several of them appear to work correctly (very fast loading and population of the folder's contents) and others don't. I have been using eclipse to enhance the software tool we're using (ImageJ) and using the debugger I can see that when the JFileChooser object is being instantiated and populated with entries a tremendous amount of network traffic occurs. This network traffic is equivalent to the amount I see when the same folder is opened in My Computer using a thumbnails view of the folder contents. Apparently, the network is delivering approximately 300-400 MB of images. As far as configuration of the Windows machines is concerned I haven't found a significant difference yet, though I admit I am not a Windows desktop admin and may not know of some configuration item that could be responsible. I assume (though could be mistaken) that both My Computer and JFileChooser are ultimately using similar API calls to get the folder content entries?

  • Multi-row "Drag and Drop" works for some users, not others

          Background: We are working on Win7 SP1 clients, Project Prof. 2010, SP2
          A couple of users have reported that they cannot move ("drag") multiple selected rows in a task sheet, only a single row at a time. Other MS Project users around them (and myself) can move multiple rows with the "Drag"
    feature. "Drag and Drop" is selected in the "Options/Advanced" section of both their local global template and the Enterprise Global.
         To my knowledge, the multiple row selections contain no collapsed summary tasks, in case that might be an issue.
         I'm suspecting some Windows setting is amiss on the offending clients, but wanted to see if anyone else had seen this behavior before in Project Prof. 2010.
         Thanks!
    JTC
    JAckson T. Cole, PMP, MCITP

        Thanks for the response, Shiva!
        User community is on MS Project 2010 (14.0.7011.1000) SP2, MSO (14.0.7128.1000)
        To reproduce the problem, MS Project user will select multiple task rows by selecting first row, then holding MB1, and "sliding" to the last row desired. The problem manifests itself by NOT turning the cursor into the "four-arrow cross"
    after selection is accomplished. If only one row is selected, the ability to move that row alone is available.
         Again, only a couple of users (that have called me!) are seeing it. Their officemates are not having an issue.
         FYI ...
    JTC
    JAckson T. Cole, PMP, MCITP

  • Flash Player Works for Some Users, Not Others

    I have recently upgraded my home computers to Windows 7 (64 bit). My kids all have standard user accounts. I have installed Adobe Flash Player as an administrator. It works for me (administrator) and some of my kids (standard accounts) but not for all of my kids. As far as I can tell, the kids' accounts are identical, so I can't figure out why some of them can use Flash Player and some cannot on the same computers.
    For the accounts where Flash Player does not work, we get a prompt to install the latest version (which, of course, is already installed). Even when I try to reinstall it (using my administrator password), the problem is not resolved. I have tried uninstalling and reinstalling Flash Player, with no success.
    I use both Windows Parental Controls and Windows Family Safety for my kids' accounts. All four kids have the same settings. I tried turning these off temporarily to see if that would make a difference but it did not.
    I am baffled. Help!

    Hi, very confusing, I agree. Here is a link to a thread that the poster found success.http://forums.adobe.com/message/2476140#2476140         (BruceTR)
    http://www.microsoft.com/windows/internet-explorer/support/call-us.aspx 
    Microsoft's toll free # for IE8 issues, which this is.  Following is a great forum by Microsoft; covers Win7, Vista & XP and
    add'l topics.   http://social.answers.microsoft.com/Forums/en-US/categories
    Also, the link for the live one safety scan by Microsoft:  http://onecare.live.com/site/en-us/default.htm
    Hope this information helps you. IE7 and IE8 have more security and therefore use is restricted, i.e. Administrative and User classifications, etc.

  • Why does CTRL+ enlarge images on some pages, not others?

    I have a website with many pages. On some pages, CTRL+ enlarges the images, on others, it enlarges the TEXT BUT THE IMAGE ACTUALLY SHRINKS!. An example of a page where CTRL+ does not work:
    http://www.microscope-antiques.com/acme4.html
    An example of where it does work (home page): www.microscope-antiques.com/index.html
    There is no Javascript on these pages. It is all in xhtml 1.0 STRICT, AND W3C CHECKS THE PAGES AS GOOD AS DOES THE CSS CHECKER FOR THE STYLE SHEETS.
    i USE A LIQUID LAYOUT SO ALL VIEWERS HAVE THE SITE FILL THE SCREEN.
    I have searched the W3C site and the net and cannot seem to find an answer.
    Any help would be much appreciated.
    Thanks
    Barry

    This probably happens because the images are in a div container that has a fixed width.
    The images themselves are quite large and scaled down to fit in their container.
    If you zoom the page then the containers keep their width and thus the images won't get zoomed as would have happened if thumbnails had been used.
    The reduction might be caused by those floating elements having their position as percentages.

  • My apple calendar shuts off after a second on some days not others

    My google calendar turns off after a second on some days and not others

    Hello JPhardboiled,
    To save battery power, the camera turns off automatically after 1 minute of non-operation. To turn on the camera again, just press the shutter button halfway.You can change the auto power-off time with [: Auto power off] Setting the Power-off Time/Auto Power Off To save battery power, the camera turns off automatically after a set time of idle operation elapses. If you do not want the camera to turn off automatically, set this to [Disable]. After the power turns off, you can turn on the camera again by pressing the shutter button or other buttons.1 Select [Auto power off]. Under the [] tab, select [Auto power off], then press <>.2 Set the desired time. Select the desired setting, then press <>.
    Even if [Disable] is set, the LCD monitor will turn off automatically after 30 min. to save power. (The camera’s power does not turn off.)

Maybe you are looking for