Synchronization problem in W ebtogo Setup and Webtogo Cartridge not working

For setting up the Webtogo environment we are facing a few problems likely:
1. The publishing is not happening through
publishing wizard while webtogo cartridge is running in OAS although the OAS manager showing that cartridge is running properly and the publishing wizard giving the error
WTG20502; Null in this case but if we run the Webtogo server separately then the publishing procedure is working perfectly.
2.After we published one application it is working perfectly in offline and online mode
i.e the database transaction is going on properly but while switching from offline to online mode or viceversa the synchronization procedure is working perfectly(so to say) but actually the data synchronization is not happening although the
synchronization procedure is not giving any error.
Please help us in this line.

I am certain it is a hardware issue from the problems youre describing. I would contact Lenovo. They may try to have you purchase their "software" support, but don't let them. I had wifi issues and they tried to make me spend $90 because I was too lazy to figure it out on my own.
Make sure when you're calling support that you tell them that you restored to factory default and before you send your computer in, back up your data. Also tell them that it's a new computer and you do not want to pay for shipping... They will most likely comp you shipping in both directions.

Similar Messages

Problems with re-grouping - subtotals and pagebreaks do not work

I'm trying to create a report with all of my grouping in the template as opposed to the data definition. I've copied a simplified version of my code and xml below.
I'm having two issues:
1. The pagebreaks are not working. For every change in pagebreak_seg, second_seg, or third_seg there should be a pagebreak.
2. The subtotalling isn't working. At each grouping level, I'm using sum(current-group()/...) to capture a subtotal at the new level. It worked the first 3 times (for Account_seg, Cat3 and Third_Seg, but stopped working at Second_seg. The second_seg keeps appearing after each Third Seg and has the same values rather than appearing at the end of the final Third Seg that falls within the Second_seg. Is there a limit to how many times I can do this, or have I got an error in here somewhere.
I can email the xml and the template if that would be more helpful.
Thanks very much for your help.
What I'm expecting to see.
1st Page
entity: 001 My Department
program: 72020 Financial Services
organization: 160013 Human Resource Functions
account 540300 desc and subtotals
Subtotal these amounts under category of Travel
account 522200 desc and subtotals
Subtotal these amounts under category of Supplies and Services
Subtotal for Human Resource Functions
pagebreak
2nd Page
entity: 001 My Department
program: 72020 Financial Services
organization: 160018 Org 1
account 5254000 desc and subototals
Subtotal these amounts under category of Supplies and Services
Subtotal for Org 1
Grand Total for Financial services
Grand total for My department
--excerpt from template
<?start:body?>
##<?for-each:XXFIN_PSBE2_XML?>
####<?for-each:LIST_G_HEADER_PAGE?>
######<?H_TITLE?>
####<?end for-each?><?PageBreak?>
####<?for-each-group:G_REPORT;PAGEBREAK_SEG?>
######<?for-each-group:current-group();./SECOND_SEG?>
########<?for-each-group:current-group();THIRD_SEG?>
##########<?SEG_1_HEADER?>
##########<?PAGEBREAK_SEG?>
##########<?PAGEBREAK_DESC?>
############<?for-each-group:current-group();CAT3?>
##############<?for-each-group:current-group();ACCOUNT_SEG?>
################<?ACCOUNT_SEG?>
################<?ACCOUNT_DESC?>
################<?sum (current-group()/APRIL)?>
################<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
##############<?end for-each-group?>--account seg
##############<?CAT3_DESC?>
##############<?sum (current-group()/APRIL)?>
##############<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
############<?end for-each-group?>--cat3
##########<?THIRD_DESC?>
##########<?sum (current-group()/APRIL)?>
##########<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
##########<?split-by-page-break?>
########<?end for-each-group?>--third
########<?SECOND_DESC?>
########<?sum (current-group()/APRIL)?>
########<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
########<?split-by-page-break?>
######<?end for-each-group?>--second
######<?split-by-page-break?>
####<?end for-each-group?>--pagebreak
##<?end for-each?> XXFIN_PSBE2_XML
<?end body?>
--simplified xml
<?xml version="1.0" encoding="UTF-8"?>
<XXFIN_PSBE2_XML>
<p_actuals_year>2006-07</p_actuals_year>......
<LIST_G_HEADER_PAGE>
<G_HEADER_PAGE>
<H_RECIPIENT_NAME/>
<H_TITLE>Monthly Account Detail Report</H_TITLE>
<H_USERNAME>DOREY</H_USERNAME>
<F_FOOTER>Test.</F_FOOTER>
</G_HEADER_PAGE>
</LIST_G_HEADER_PAGE>
<LIST_G_WORKSHEET1_NAME>
<G_WORKSHEET1_NAME>
<WORKSHEET1_NAME>001E1-6 Department - 8272</WORKSHEET1_NAME>
</G_WORKSHEET1_NAME>
</LIST_G_WORKSHEET1_NAME>
<LIST_G_WORKSHEET2_NAME>
</LIST_G_WORKSHEET2_NAME>
<LIST_G_REPORT>
<G_REPORT>
<REPORT/>
<PERIOD_NUMBER>12</PERIOD_NUMBER>
<SUM_SALARY_IND>N</SUM_SALARY_IND>
<ENTITY_SEG>001</ENTITY_SEG>
<ENTITY_DESC>Health</ENTITY_DESC>
<SEG_1_HEADER>Entity:</SEG_1_HEADER>
<SEG_2_HEADER>Program:</SEG_2_HEADER>
<SEG_3_HEADER>Organization:</SEG_3_HEADER>
<PAGEBREAK_SEG>001</PAGEBREAK_SEG>
<PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
<SECOND_SEG>72020</SECOND_SEG>
<SECOND_DESC>Financial Services</SECOND_DESC>
<THIRD_SEG>160013</THIRD_SEG>
<THIRD_DESC>Human Resource Functions</THIRD_DESC>
<CAT2>AC5100</CAT2>
<CAT2_DESC>Goods and Services</CAT2_DESC>
<CAT3>F50015</CAT3>
<CAT3_DESC>Travel</CAT3_DESC>
<ACCOUNT_PRECISION>54</ACCOUNT_PRECISION>
<ACCOUNT_SEG>540300</ACCOUNT_SEG>
<ACCOUNT_DESC>Accommodations & Incidentals - In Province</ACCOUNT_DESC>
<ACCOUNT_FUTURE_DESC>Accommodations & Incidentals - In Province</ACCOUNT_FUTURE_DESC>
<FUTURE/>
<FUTURE_DESC/>
<CURRENT_FORECAST_COLUMN>0</CURRENT_FORECAST_COLUMN>
<APRIL>0</APRIL>
<MAY>53</MAY>
<JUNE>-53</JUNE>
<JULY>0</JULY>
<AUGUST>0</AUGUST>
<SEPTEMBER>0</SEPTEMBER>
<OCTOBER>0</OCTOBER>
<NOVEMBER>0</NOVEMBER>
<DECEMBER>0</DECEMBER>
<JANUARY>0</JANUARY>
<FEBRUARY>0</FEBRUARY>
<MARCH>0</MARCH>
<YTD_ACTUALS>0</YTD_ACTUALS>
<BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
<VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
<PERCENT_SPENT_OF/>
</G_REPORT>
<G_REPORT>
<REPORT/>
<PERIOD_NUMBER>12</PERIOD_NUMBER>
<SUM_SALARY_IND>N</SUM_SALARY_IND>
<ENTITY_SEG>001</ENTITY_SEG>
<ENTITY_DESC>Health</ENTITY_DESC>
<SEG_1_HEADER>Entity:</SEG_1_HEADER>
<SEG_2_HEADER>Program:</SEG_2_HEADER>
<SEG_3_HEADER>Organization:</SEG_3_HEADER>
<PAGEBREAK_SEG>001</PAGEBREAK_SEG>
<PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
<SECOND_SEG>72020</SECOND_SEG>
<SECOND_DESC>Financial Services</SECOND_DESC>
<THIRD_SEG>160013</THIRD_SEG>
<THIRD_DESC>Human Resource Functions</THIRD_DESC>
<CAT2>AC5100</CAT2>
<CAT2_DESC>Goods and Services</CAT2_DESC>
<CAT3>F50035</CAT3>
<CAT3_DESC>Supplies and Services</CAT3_DESC>
<ACCOUNT_PRECISION>52</ACCOUNT_PRECISION>
<ACCOUNT_SEG>522200</ACCOUNT_SEG>
<ACCOUNT_DESC>Rent of Photocopiers</ACCOUNT_DESC>
<ACCOUNT_FUTURE_DESC>Rent of Photocopiers</ACCOUNT_FUTURE_DESC>
<FUTURE/>
<FUTURE_DESC/>
<CURRENT_FORECAST_COLUMN>0</CURRENT_FORECAST_COLUMN>
<APRIL>0</APRIL>
<MAY>0</MAY>
<JUNE>0</JUNE>
<JULY>0</JULY>
<AUGUST>0</AUGUST>
<SEPTEMBER>25</SEPTEMBER>
<OCTOBER>-25</OCTOBER>
<NOVEMBER>0</NOVEMBER>
<DECEMBER>0</DECEMBER>
<JANUARY>0</JANUARY>
<FEBRUARY>0</FEBRUARY>
<MARCH>0</MARCH>
<YTD_ACTUALS>0</YTD_ACTUALS>
<BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
<VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
<PERCENT_SPENT_OF/>
</G_REPORT>
<G_REPORT>
<REPORT/>
<PERIOD_NUMBER>12</PERIOD_NUMBER>
<SUM_SALARY_IND>N</SUM_SALARY_IND>
<ENTITY_SEG>001</ENTITY_SEG>
<ENTITY_DESC>Health</ENTITY_DESC>
<SEG_1_HEADER>Entity:</SEG_1_HEADER>
<SEG_2_HEADER>Program:</SEG_2_HEADER>
<SEG_3_HEADER>Organization:</SEG_3_HEADER>
<PAGEBREAK_SEG>001</PAGEBREAK_SEG>
<PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
<SECOND_SEG>72020</SECOND_SEG>
<SECOND_DESC>Financial Services</SECOND_DESC>
<THIRD_SEG>160118</THIRD_SEG>
<THIRD_DESC>Org 1</THIRD_DESC>
<CAT2>AC5100</CAT2>
<CAT2_DESC>Goods and Services</CAT2_DESC>
<CAT3>F50035</CAT3>
<CAT3_DESC>Supplies and Services</CAT3_DESC>
<ACCOUNT_PRECISION>52</ACCOUNT_PRECISION>
<ACCOUNT_SEG>525400</ACCOUNT_SEG>
<ACCOUNT_DESC>General -Telephone</ACCOUNT_DESC>
<ACCOUNT_FUTURE_DESC>General -Telephone</ACCOUNT_FUTURE_DESC>
<FUTURE/>
<FUTURE_DESC/>
<CURRENT_FORECAST_COLUMN>84</CURRENT_FORECAST_COLUMN>
<APRIL>0</APRIL>
<MAY>0</MAY>
<JUNE>0</JUNE>
<JULY>0</JULY>
<AUGUST>0</AUGUST>
<SEPTEMBER>0</SEPTEMBER>
<OCTOBER>0</OCTOBER>
<NOVEMBER>0</NOVEMBER>
<DECEMBER>84</DECEMBER>
<JANUARY>0</JANUARY>
<FEBRUARY>0</FEBRUARY>
<MARCH>0</MARCH>
<YTD_ACTUALS>84</YTD_ACTUALS>
<BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
<VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
<PERCENT_SPENT_OF>1</PERCENT_SPENT_OF>
</G_REPORT>
</LIST_G_REPORT>
</XXFIN_PSBE2_XML>

Additional info on the grouping problem:
I tried removing the third_seg group and the second_seg group started working properly. I then deleted the second_seg group and the pagebreak_seg started working. So as long as I have only one level of grouping below cat3 the output is correct. Unfortunately I need those additional levels, so if anyone has any suggestions, I would really appreciate it.
Alternately if someone knows of a sample with mutliple levels of grouping, I would appreciate a link. There was a link on the the BI Blog but it doesn't work any longer.
Thanks for your help.

I have reinstalled CS5.1 extended on my new Lenovo Laptop with Win 8.1 64 bit. No installation problems, but now Image Adjustments and tools do not work any more.

Operating Problem with CS5.1 extended. I replaced my old HP Laptop with a new Lenovo laptop with Win 8.1 and reinstalled CS5.1 64-bit version. The software downloaded and installed correctly and worked for a day, but when I rebooted the next day, the Image Adjustments and tools functions did not respond any more. I have uninstalled and redownloaded/ reinstalled without success.

Notebook Info
1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
8192 MB DDR3-RAM
Harddisk: 1000GB SATA
NVIDIA N15V-GM mit 1GB DDR3
Prefs
As per download settings, I changed nothing
Image Info
Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
I then downloaded and installed on my PC and everything works.
Regards Roland

Final Cut 6 and Color does not work

Hello,
I bought FInal Cut Pro Studio 2 and i receive the suite today and instal only apps ( no contents and loops )without problem
Tried to open FCP6 and Color but not working.
i launch FCP 6 or Color,2 jumps on dock and then quit.
can be memory problem.( i have 768RAM on my imac G5 64VRAM)
any pacth to resolv this problem?
ps* SountrackPro 2,DVDStudio Pro,Motion3,LiveType,CinemaTools and Compressor woks fine in the same computer
Computer configuration
IMac G5 1.6 with 64VRAM and 768RAM
thx in advance

Ok,forgot Color,but and about final cut 6 ? why does not work?
max resolution 1440x900.
i was looking the systen requirements on fcp page
Minimum Requirements to Install All Final Cut Studio Applications
Final Cut Pro 6
Macintosh 1.25GHz or faster PowerPC G4, PowerPC G5 = OK
1GB of RAM = NO,my iMac have 768RAM
1024-by-768 resolution or higher OK
Mac OS X v10.4.9 or later OK
QuickTime 7.1.6 or later OK
A DVD drive for installation OK
Can i deduce that problem is because i don't have RAM enought?
THX

I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.

Just got NEW Apple TV, The status light went out during final part of setup and it no longer works

Just got NEW Apple TV, The status light went out during final part of setup and it no longer works. Any ideas?

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

My Ipod touch recently fell into water, but once dried, it worked with seemingly little to no problems. Today, after working for at least an hour, the screen froze and is now not working, but the sounds are still functioning.

I accidentally dropped my Ipod into the lake, at the beach yesterday, but i caught it early and it wasn't too soaked... i wiped it off for the most part, and most of the buttons and the screen worked fine! i was shocked, and there were a few glitches with the camera and the slide button on the lock screen, but otherwise it was greatly intact! so i gave it a rest, put it in my purse, and picked it up fifteen minutes later, and it was working 100% normally again! when i got home a few hours later, i put it in rice for a few hours, taking it out every once and a while to check my notifications... it still seemed to be working perfectly, so i just set it down out of the rice, assuming the moisture was gone. this morning, again, everything was working normally, no glitches, UNTIL, i opened my instagram app, and the screen froze, and it seemed like it had two separate screens, and i held the Sleep button down until the screen went black... then i tried turning it back on, etc. and it still didn't work, and so i plugged it into the computer, holding down the sleep and home buttons, and itunes identified it as in recovery mode, and started updating. i tried again to press the sleep and home butttons, maybe pressing only the home button, because I heard the Siri noise, as well as the charging sound, but the screen was still black.... i checked my iTunes, and lo and behold, it had identified my iPod, and synced it to the computer, as if it were normally functioning. However, the screen is still not working, and Siri is not working either. The sounds may be the only thing that's functioning. Should i send it in?

- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
Sometime it takes a little while for the water to damage the iPod.

I have a problem in activate Alaaclaud account and I can not open the device

السلام عليكمI have a problem in activate Alaaclaud account and I can not open the device

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.

Page is working ok in chrome and IE but not working in firefox. jquery problem i guess

http://184.170.251.149/raschet-shkafa-kupe
this page is working correctly in chrome and IE but not working in firefox, i cant click and of the dropdown menus(ДСП, доличество дверей). it was working perfectly prior firefox 18. can you please fix the compatibility problem ?

I was referring to the second page in my above post.
I disabled JavaScript as a test after loading the page with JavaScript enabled and that worked.<br />
I also get the selects to open if I right-click instead of left-click the select.<br />
That way the select get selected (shows a focus ring) and after that left-clicking works as well .
This assumes that JavaScript is monitoring the left-click, but that script no longer works properly.
A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

HT1918 Got a problem in my iTunes account and I can not purchase through

Got a problem in my iTunes account and I can not purchase through

Most of the people on these public forums, including myself, are fellow users - you're not talking to iTunes Support here. I've asked the hosts to remove your email address from your post.
What happens when you try to buy them, does the 'buy' button not work, do you get any error messages ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we won't know why it'sappearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

You cannot download the upgrade to Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

I have a downloaded font file for a school problem on a flash drive and I do not know how to install it into my photoshop application. Need to be walked through this as I am an older user who does not understand any of this stuff.

I have a downloaded font file for a school problem on a flash drive and I do not know how to install it into my photoshop application. Need to be walked through this as I am an older user who does not understand any of this stuff.

Fonts are handled by your operating system and installed through the respective System Control panel (Windows) or Fontbook (Mac). On Windows simply type "Fonts" in the search bar in the start menu and when you open the panel/ folder use File --> Add Font. On Mac the procedures are similar, you just need to find the Fontbook app in Applications:Utilities.
Mylenium

Synchronization problem in W ebtogo Setup and Webtogo Cartridge not working

Similar Messages

Maybe you are looking for