Synchronize acting up

Folks,
I have an annoying problem with synchronize. I keep a LR ctalog that is fully synchronized with my physical image folder. When I add images I run sync, and the LR ctalog is usually up to date.
But I renamed one folder containing some 40 images, went into LR and used Locate missing folder to point to it after which it disappeared! I have since added one picture to the folder, and even though synchronize says that there are 41 new pictures, it only sees the single new one and says that there is nothing to import.
I naturally thought that my images were somewhere else in he catalog, but a search for any of the 40 will yield nothing.
I deleted the folder from the catalog and resynced. Same issue.
I also renamed the folder on the disk and resynced. Same thing. LR removes the old folder and adds a new - with only the new file.
I made a copy of the folder and resynced. No go! No new images.
I moved the whole folder out of the main image folder, resynced (it disappeared), moved it back, resynced. One single image again!
How do I get my folder back in sync and get to see all my images?
Martin

shruthi
if he gets promoted Run promotion action
if u want to do it thru organisational reassigment that the reason for that action shd be done as promotion

Similar Messages

Setup synchronize with address for Sage ACT! showed Runtime Error: Cannot configure the section.

Hello Blackberry Senbai...
As my problem showed as subject line. "When I setup synchronize with address book for Sage ACT! showed Runtime Error: Cannot configure the section."
Setup was stopped from this point.
my system info..
Desktop Manager version is 5.0 downloaded from Blackberry website.
ACT version is 2010.
OS: Window XP Pro with service pack 3
Thank you for your time to review my problem.

Hi and Welcome to the Forums!
Since the version of ACT that you state is not contained in the PIM compatibility matrix, I'm not sure that there is anything to be offerred...
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Synchronization with ACT Software

Can the BB 8330 be synchronized with ACT?

Using BlackBerry Desktop Manager version 4.2, Service Pack 2, you can sync with ACT!® 4.0.2, 5.0 (2000), 6.0
I don't believe later version of the Desktop Manager application will sync with ACT.
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to synchronize PI service registry and IBM WSRR

Hello All,
In our current project we have developed one web service which resides in SAP CE and is registered in SAP PI Service Registry.
But our client has IBM websphere that acts as a middleware for all ther services (interfaces/web services)
Now, I need to understand how to synchronize SAP PI Service Registry with IBM WSRR (Websphere Services Registry and Repository)
What are the steps/configurations need to be performed at PI end and IBM WSRR end?
Appreciate your help in this matter.
Thanks,
Shriram.

Hi,
Refer the below links i think it will be helpful.
Configuring a central Services Registry:
http://help.sap.com/saphelp_nwce711/helpdata/en/47/d391d7b8fc3c83e10000000a42189c/frameset.htm
You can also use the Wizard based configuration: http://help.sap.com/saphelp_nwce711/helpdata/en/f7/6182bd68434595ba5105a0a346efcc/frameset.htm
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00985388-6748-2c10-0d83-f17c3e768a8b&overridelayout=true
Regards,
Sudha S.

Please help, unable to synchronize and run Applications NW2004s

Hi All,
I am newbie (no only for mobile, them for SAP) i can't run any example! and i really need for your help:
I have a Pentium IV +2GB RAM + Windows server 2003 + Oracle ( I them try to install the system in a Xeon but i have problems with the SDM password so i can't update the Java Components to SP 10).
The Enviroment:
Sever called erick:
1) First i install NW2004s ABAP + JAVA + MI 7.0, SP 6 over Oracle 10.2
2) After that i Update:
Kernel to version 83
SAINT, ABA, Basis to SP 10
JSPM, NWCLIENT, NWLAP, NWADMIN, NWDRIVERS to SP 10 for MI 7.0
3) After that, i used the MI template going to my server: http://erick:50100/nwa, login as J2EE_ADMIN, deploy & changes.... it appears to work... but when a login into the web system it says:
 System Landscape Directory is not accessible.
 Local System Only can be administrate. (maybe here is the key)
On the Client side:
Windows XP + NW developer Studio Version: 7.0.10 + MI Client (I extract this from the NWCLIENTNT10_0-20000910.SCA, SAP Mobile Infrastructure, Version MI 70 SP10 Pacht 0 )
NW developer Studio is Configured in this form (Using Windows -> Preferences -> MI Development)
MI Folder: C:\Archivos de programa\SAP Mobile Infrastructure (Archivos de Programas (Spanish) = Program Files)
Java SDK tools.jar file: C:/j2sdk1.4.2_08/lib/tools.jar, I can't change it.
MI server name: localhost (I think this is Wrong, this have to be erick?, i will try with this)
MI weapp TCP port: 4444
Command line to launch browser: cmd /C start iexplorer
Awt runtime:
MI Home Folder: C:\Archivos de programa\SAP Mobile Infrastructure (C) (I extract this from the NWCLIENTNT10_0-20000910.SCA too)
MI Logon Information: eilarraza, this user was the one that i create to update the system in the server, it has: SAP_ALL, and SAP_NEW permissions.
Password: The Master Password of the system.
When a push the Test Setting button, it works!
MI Client Configuration:
USER: eilarraza
Client: 000
Languaje: EN
Country: Venezuela
Time Zone: ACT
Synchronization:
Protocol: http
Host: erick
Port: 50100
System: ERI
Proxy: NO, we used DHCP.
Problem:
I am Unable to synchronize with MI server.
I import a .war file, i export It, but a i can't run It.
Searching in the forum i arrive to a Excellent BLOG: http://jogel.sdn.googlepages.com/milad
(Literally i read all the BLOG, is very good for the newbies, it is a excellent work)
I Install the mobile application using a tool called LAD, i restart the MI Client, and the application is Installed!!! But when a try to Syncronized it i received the same error:
Syncronization Started.
Connection Set up (without proxy) to http://erick:50100/sap/bc/MJC/mi_host?~sysid=ERI&
Connection to server failled
Problems in the Syncrhonization Not Found 404; The server has not found anything matching the URI given.
Basically i can't Syncrhonaze the MI Client with the Server. I search in the Forum, Documentation, Google, Blogs, etc etc, Surely is a configuration problem, please i need some tips.
Best Regards,
Erick Ilarraza

Hi Jo Santiago, Sivakumar V
Thanks a lot for your help!
Jo: I made Pings to erick:
Ping statistics for xxx.xxx.xxx.xxx: (i removed the local ip)
Packects: Sent = 4, Received = 4, Lost = 0 (0% loss), Works perfect.
nslookup does not work, maybe because all the machines are in a local network.
I am investigating about: ICM Logon and SLD. I don't know what it is that, i Remember that in the installation phase i say NO when he ask me to install the SLD.
Sivakumar:
After the 3 Steps, the services (that were down) now are UP but when a try to test the service he ask me for:
Enter username and password for "SAP Web Application Server [ERI] at http://erick:8001
I try with J2EE_ADMIN + Master Password, I always use this user to go into the Web Server.
Logon failed.
Note
Logon performed in system ERI .
Logon performed for client 001 and language EN.
Them i try with: SAP*, and eilarraza (SAP_ALL, SAP_NEW permissions)
It does not work.
After i try to synchronize the MI Client (with the services mi_host and mi_services UP). But it does not work.
So who is exactly the middleware user? The J2EE_ADMIN? or the one that i create with SAP* to update the system to SP10 (It has SAP_ALL, SAP_NEW permissions, in my case is called eilarraza) Maybe the problem is that i a not using the correct user in the MI Client configuration neither in the test of the service.
Best Regards,
Erick Ilarraza

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Synchronize By Audio No Longer Works After 7.2 Update

After installing the Premiere Pro CC 7.2 update, the synchronize by audio no longer works correctly. When you highlight the clips and sync by audio it acts like it's doing something but then puts the clips nowhere near close being a match (usually one clip on one side of the timeline and the one on the other).
Is anyone else having this issue? I've run into it on two seperate computers bothe running Premiere Pro CC 7.2 on Windows 8.1 machines.
- Dennis

Bumping this. I'm a brand new CC subscriber and the sync function was a big part of why I moved to CC. 50% of the time it works, but the rest of the time, it pushes the video clip much farther down the timeline.
Update 1: To clarify, I am doing this from the sequence itself. So tracks A1/V1 are the original audio/video from camera, then A2 is my sound I want to sync.
It does not seem to have a problem syncing the same "problem" clips when I use the "Merge" by Audio from the Bin.
Update 2: I found that, if I unlink the original A1/V1 clip, then select all three (A1/V1/A2) and Synchronize, it works.
Obviously, this is an unacceptable workflow, but I hope that helps Adobe figure out what's going on here.

How to use the PXI's 10MHz backplane clock to synchronize two or more 6031E boards?

Hi,
I'm trying to use two 6031E boards to acquire multiple channels Analog Inputs, and I'd like to sync them with the PXI backplane clock (not the RTSI bus). I found an example from NI, "Two E-Series Shared ScanClk.vi", and modified it a bit. But I'm wondering if the two boards must have the same acqusition rate? e.g. Can I have 1 board acquiring at 1kHz while the other one at 20Hz? and if yes, how do I do it?
Your input will be very much appreciated. Thanks!
Dan
Attachments:
mod_Two_E-Series_Shared_ScanClk.vi ‏148 KB

Unfortunately, E Series boards cannot synchronize with the 10 MHz PXI backplane clock. They do, however, have access to the PXI trigger lines, which are basically the RTSI lines. Except for line 6 which is the star trigger line. They can only read from this line.
The example program you have selected will definitely be part of your solution. It allows you to share the scan clock timing signal between two boards. If you would like the slave board to acquire at a slower scan rate, you could always route the master's scan clock to one of the slave's on-board counters which can act as a frequency divider. The output of this counter can become the new slower scan clock for the slave board. Use the Generate Pulse Train shipping example VI as your frequency d
ivider. Finally, make sure you route the signals appropriately and you'll be in business.
I hope this helps!
Russell McMurtrey
Applications Engineer
National Instruments
http://www.ni.com/support

Trying to understand "User/Role/Profile Synchronization" and Batch Analysis

Hello,
Im trying to understand what exactly and from which tables these jobs are copying to which tables in CC. I have a understanding that these jobs are moving also deleted roles from backend. This is causing unnecessary delay to long lasting job.
I would appreasite if some one could explain the logic behind these jobs. What the fullsync and incremental is reading ? What kind of changes are causing a role/user/profile to be included to the full and incremental jobs?
How the incremental analysis logic is built ?
br Janne

Janne,
In my current implementation we are going for an offline risk analysis due to the heteregoneus system landscape of our client (several SAP and non SAP systems and several SAP systems under 4.6C). Eventhough within our approach we don't perfrom the backend synchronization (we use CC data extractor to pull data from backend into CC) hope the following info could hel you:
The tables such jobs you mention access to, are all the SAP backend system tables related with users, roles, profiles, action and permissions. If you check the data mapping appendix of the "user and configuration guide for 5.2" you will see all the data that CC retrieves. For instance, in order to extract user info (UserID, FName, LName, Email, Phone, Email, Department) tables USR21, USR02, ADRP, ADR6 and ADCP must be accessed.
In terms of CC tables:
VIRSA_CC_SYSUSR >> UserIDs and Systems ID relationship
VIRSA_CC_GENOBJ >> User, Role and Profile master data
VIRSA_CC_GENACT >> User-action, role-action and profile-action data
VIRSA_CC_GENPRM >> User-permission, role-permission and profile-permission
VIRSA_CC_SAPOBJ >> Action-permission
VIRSA_CC_OBJTEXT >> Objects descripcions (ACT, PRM, FLD, VAL, ORG)
Hope this helps.
Regards,
Imanol

OS X Server - Setting Up Laptops properly to synchronize when connecting back to the network, OS X Server - Setting Up Laptops properly to synchronize when connecting back to the network

I have a Mac Mini server (twin 500 gb HD) which I have had for about 2 years. Mainly I have just played around with it, but never set up the server functionality to it's full extent. I just clean installed OSx Mountan Lion (10.8) on the machine. The two HD's are separate and not in a RAID configuration.
With the release of 10.8 OSx, the server functions are now in an App you have to purchase and download. No issue for me, but I would like some assistance and guidance from the community on how to properly set up the server for my needs (or if staying with the basic OS is fine).
I have a couple of MacBooks, an iPad and two iPhones in the family, plus a remote Mac in another city. The OSx devices will be upgraded to 10.8 soon, the iOS's are up-to-date with the latest os. I also have a new Time Capsule running our network, but haven't started using it as a TM backup location (current backups are on local attached drives}
I plan to use the Mac Mini with dual HD's primarily as the location where our media resides, regardless of whether it becomes a server or stays in the base OSx. However, reading over some of the capabilities of the server ( 1 ), I'm hopefull I might be able to do more with the machine.
I'd like to be able to have a centralized user account managment via the Open Directory that the OSx Server provides. Would also like to be able to set the other "client" computers / devices to allow for synchronization back to the server when they reconnect to the network after being mobile. Also, it would be nice to set up the configuration of each of the users such that their preferences, iTunes media file locations, etc are consistent across all machines.
There may be some limitations to what I am attempting, that I am unaware of. However, if at minimum I could accomplish the account managment easily, that would be a win.
Assume I know little or nothing about domains and authentication -- not exactly true, but I don't want to assume anything with my limited knowledge. I don't mind reading detailed step-by-step manuals if they are available, but I would appreciate some guidance and wisdom to get me started.
Thanks for any help y'all can provide.
Kirk
(1) http://movies.apple.com/media/us/osx/2012/server/docs/OSXServer_Product_Overview .pdf

OS X Server is an interesting beast, I am at work an IT Director in a Microsoft only environment, and am reasonably familiar with Linux/Unix having used it personally for many years.
OS X Server is, as you will likely know, a combination of various open source packages (BIND, Postfix, Dovecot, Open Directory etc.) with an Apple 'wrapper'.
I have recently got into similar situation as you, Apple gear at home (not one MS or Google product) and my old Linux server machine running Gentoo was long overdue for retirement. Let's get a Mac OS X server I said — it's based on *nix with the Mac front-end, what could be better??
[rant]
My experience after installing and configuring the whole thing — Mac mini + ML OS X Server ? Personally I think that Apple has gone backwards with Lion/Mountain Lion server. Trying to make a server platform act like an end-user product is a mistake. Servers are not end user machines — by their very nature they are sophisticated and may require complex configuring. Making some lollipop front-end that is claimed to be 'simple' simply by virtue of removing (necessary) configuration options ends up fooling no-one, and frustrating pretty well everyone.
Tim Cook, if you're listening, the guys who made the changes to OS X server are on a par with the guys who made maps — sack 'em and please fix/improve OS X Server.
[/rant]
Phew that feels better. Having said all the above I will be sticking with ML Server — and keeping my fingers crossed.
OK my suggestions to you are:
First get some decent documentation I'm recommending the 'Apple Pro Training Series: OS X Server Essentials: Using and Supporting OS X Server on Mountain Lion' to people. You can get a Kindle edition on Amazon (I don't work for Amazon or the publisher).
Make a dedicated new Apple ID for Apple Push Notifications, don't use your personal Apple ID. I made one like '[email protected]' where 'example.com' is my domain name. Get this ready before server install and make sure you can receive incoming emails to that email address.
Make sure DNS is setup properly before installing OS X server. I have domain name and use the OS X DNS server to serve DNS in the LAN using that DNS domain. When client machines are on the Internet the DNS records point to the same server.
Make sure the server name & host name are correct & match the public DNS records. Don't have the host name registered in external servers until you get the (internal) OS X DNS server running OK.
After installing OS X server turn on DNS only first and configure it (read the book and remove the original domain based on the server name) and check that it is (basically) running OK and serving DNS (in the LAN) for your domain by checking Network Utility and finally also this command in Terminal.
sudo changeip -checkhostname
do not proceed any further unless this command returns success — don't.....
Ideally purchase and use a real (not self-signed) certificate. I just got a simple (not wildcard) certificate. Make sure that is installed and working on the server. One good test is to get the certificate installed, assign it to the web server, open the OS X web server to the Internet and then go to
http://sslchecker.com/sslchecker
and put in the URL of your server, for example if you had machine called 'server' and your domain was 'example.com' with SSL certificate of 'server.example.com' this site should give you green checkmarks for all parts of the certificate chain.
Only after the certificate is working OK proceed with turning on other services like Open Directory.
If you start turning on a few services you will quickly need RAM, my Mac mini is running an i5 and is OK with CPU but the stock 4 GB of RAM is not enough. Swap memory is already going up to 2 GB, I will likely increase the RAM to 16 GB. 8 GB could be enough but don't want to buy to that level and find out after (as there are only two memory slots in Mac mini) that it is not enough.
Read the book first... be prepared to reinstall the whole machine from scratch at least once. If something goes wrong at the beginning and one of the fundamental things gets messed up — don't bother trying to rectify it, and don't think that just re-installing Server will be OK. Wipe the whole machine including the base OS and restart from scratch.
Setup OS X Server DHCP for the LAN and point DNS (for LAN clients) to the server DNS server.
Bring up new services one by one and check they are functioning — use logs to check what is happening even if things look to be going OK.
I found for email addresses and Open Directory accounts that the short name of the OD account had to be the same as that to the left of the @ sign of the email address. So if someone's email address is [email protected] then their OD account short name had to be 'fred'. Otherwise Dovecot (IMAP) will not deliver email. I am sure there is somewhere to fiddle with this so the OD account short name can be different but I didn't bother digging around at the time.
Good luck!

Disable synchronization in Mail

This request is probably the opposite of what everyone else wants, and that´s why I can´t find the answer anywhere.
I have 2 macs using Mail, and with the 3 same e-mail accounts set up in both. I used to have POP mails, and a few weeks ago I changed to Imap. That´s when my "problems" started.
If I open, read, delete etc. anything in Mail.app on one of the macs, the other one automatically updates what´s been going on. I want this feature disabled. My e-mails are for work, so if I read them at home, I want them to show as unread on the other mac when I go to work, so that I don´t forget which e-mail are new and not.
Please help me out here if anybody knows how and why this suddenly happened!
Thanks
-Cathrine

What you're describing is the nature of IMAP e-mail. All of your messages are stored on the IMAP server, and it is the "master copy." When you read a message with one computer, it gets marked as read on the server. When the other computers contact the IMAP server, they update themselves to reflect the status of the messages stored on the server. Also note that the same holds true for any messages that you delete. Once a message is deleted from the server, it will be deleted from all of your computers.
This is very different from POP e-mail. POP does not provide any mechanisms for changing the status of a message on the POP server.
There is, however, one big advantage to IMAP that you can use here. IMAP supports folders on the server for storing messages (POP does not). The default folder is the Inbox. You could create another folder (for example, "Reviewed"), and move messages to that folder after you read them. That way, anything you leave in the Inbox is still "waiting for me to act on it," while anything you have moved to the Reviewed folder is "already acted on." The messages in each folder will be automatically synchronized on all of your computers.
After you first create the new folder, you might need to choose the "Synchronize All Accounts" option under the "Mail" menu on each computer, to make sure it knows about the new folder. You'll only need to do that once.

Camera Raw synchronization not working

I'm using camera raw 8.1 in photoshop cs6 extended. When I select several images in bridge to synchronize the settings camera raw will not change all of the files. It will work occassionally when I select only 1 file to sync. This was working in the past and just started acting up. Any advice or how I need to set preferences? Thanks.

Hi there.
I have exactly the same problem with Bridge CC 6.0.1.6 and ACR 8.3.0.141. This always worked properly when I was using Bridge CS3. I am using a Mac running Mac OS 10.8.5
The only change on the detail tab that is consistently synchronized to all selected photos is the white balance (when not set to auto). I called Adobe tech support last night. They gave me the following steps. It appeared momentarily to resolve the problem but it persists. I already had the latest Bridge and ACR versions installed and the permissions on the cache folder was set correctly.
Howard
Troubleshooting steps from Adobe:
Please follow these steps to begin with basic trouble shooting regarding your bridge cc issue:
1. Update to the latest version of Bridge.
Download the latest Bridge update by going to Help > Updates or from the Adobe website at http://www.adobe.com/downloads/updates.html.
2. Reset preferences, reset the default workspace, and purge the cache.
You can also purge the cache by doing the following:
Choose Edit > Preferences (Windows) or Bridge > Preferences (Mac OS).
Select the Cache panel.
Click Purge Cache.
Or, you can manually purge the cache by doing the following:
Bridge > Preferences (Mac OS).
Select the Cache panel.
Look at Location and note the path for the Cache folder.
In the Finder, navigate to the Cache folder.
Drag the Cache folder to the Trash (Mac OS).
3. Reset the permissions of Application Support Folder:
In top menu Bar -> Go->Go to folder
Type in ~\Library
Select Application Support right click get info and Under sharing Permissions please change all permission to read and write.

Hardware options for synchronization

Was wondering if someone could help "rank" these approaches for synchronization.
- TCXO with shared references/PPS (i.e. - MIMO cable or OctoClock)
- OCXO
- OCXO with GPS
The "standard" TCXO models require extra stuff (MIMO or OctoClock or external sources) to phase lock and time synchronize.
The OCXO gives you better accuracy...but it is unclear the degree to which this has an effect on phase coherency (and over how long a time). Presumably, you'd still need something like a PPS to time synchronize?
With the GPS disciplined devices, are you basically getting the phase coherency and time synchronization from the GPS signal rather than external 'stuff'? Or are there instances where you'd still need something like the MIMO cable or OctoClock to further nail down timing and synchronization?
Brandon
Solved!
Go to Solution.

Hi Brandon,
Thank you for the extra information! I have been looking further in to this issue, and a lot of your question depends on your hardware and system setup. JamesB, awesome post! This is great information. To add to this, for our GPS USRPS (NI USRP 293x) unfortunately you cannot use the Ref In inputs, so splitting out the external clock is not going to be an option on this hardware. With this in mind, option (c) will likely be the easiest since that is exactly how our USRP's work. Are you using an NI USRP? If so and you're trying to sync up 8 of these USRP's together, GPS might be the only real option.
As far as direct cabling vs. GPS for accuracy, direct cabling is more accurate if you are using an external clock that is is more accurate than the onboard clock and if you're using a USRP that can use an external reference clock
The NI USRP 2930 and 2932 both have OCXO's which alone are more accurate but there is no way to extract the 10MHz source to another device, except for a MIMO cable which is only good to use for 2 devices. Therefore the direct cabling method only exists for specific scenarios:
1. Using MIMO cable for up to 2 devices
2. Using an external clock, and a splitter.
However, the internal OXCO does not do you any good for more than two device synchronization. Using a GPS antenna, clock disciplining and a clear view of the sky will let each USRP utilize it's own OXCO and still be synchronized. So it is not just GPS, it is the act of using GPS information to adjust the already great OCXO time reference which required each device to adjust it's own clock. The following document shows the specifications for a USRP without a GPS antenna (just the OXCO accuracy) vs. the OCXO accuracy in conjunction with the GPS disciplining in section 4 (Synchronization with GPS Disciplined Oscillators on NI USRP 293x):
http://www.ni.com/tutorial/14705/en/
While I was looking in to this, I also found this forum post that had a similiar question:
http://forums.ni.com/t5/USRP-Software-Radio/Synchronization-of-three-USRP-2932/m-p/2835772
I hope this was helpful!
Stephanie S.
Application Engineer
National Instruments

Synchronization RFSG with digitaizer

Hello!
How to synchronize work RFSG with work digitaizer? I can synchronize digitaizer by signals RFSG . But how synchronize RFSG by signals digitaizer?
Necessary on input TRIG (digitaizer 5114) send clock pulse, then this clock pulse to transfer on the PXI-tire to RFSG (5673) and start work RFSG on this clock pulse. Is it possible to do so? Tell me please about the scheme or algorithm or a ready solution. I can not understand how to transmit signals on the tire.
Thanks for the help.

Now I will explain that I do:
I use the block of DAQmx Connect Terminals VI. I send the signal of Reference Trig on a tire with digitizer(5114) on PFI0 of generator(5673). Then I want to use this signal as impulse of start of generator. I connect PFI0 and PFI1 a cable. In a project I specify the source of start of generator - PFI1. I start a project - all works. A generator is started as soon as on the entrance of PFI1 an impulse comes with PFI0. If an impulse does not act on the entrance of PFI1 - a generator is in the camp-on of signal of start.
Questions:
1. I want to use stepped trig for a management by the start of generator. Why herein and in other modes is a generator started and works without stops?Id est I give one impulse of start - a generator is started. I disconnect a cable from the entrance of PFI1 - but a generator continues to work. Why?In fact did he have to stop and pass to the camp-on of new impulse?I understood so, that at stepped trig a generator gets an impulse and passes to the camp-on of the second impulse.But goes out not so.
How I must do so that did a generator work with breaking or upcast in the initial state between the receivabless of impulses?I am not necessary that he generated constantly in the mode of stepped trig. Mode of single and burst does not suit for my task.

Synchronization RFSG with Digitizer

Hello!
How to synchronize work RFSG with work digitaizer? I can synchronize digitaizer by signals RFSG . But how synchronize RFSG by signals digitaizer?
Necessary on input TRIG (digitaizer 5114) send clock pulse, then this clock pulse to transfer on the PXI-tire to RFSG (5673) and start work RFSG on this clock pulse. Is it possible to do so? Tell me please about the scheme or algorithm or a ready solution. I can not understand how to transmit signals on the tire.
Thanks for the help.

Now I will explain that I do:
I use the block of DAQmx Connect Terminals VI. I send the signal of Reference Trig on a tire with digitizer(5114) on PFI0 of generator(5673). Then I want to use this signal as impulse of start of generator. I connect PFI0 and PFI1 a cable. In a project I specify the source of start of generator - PFI1. I start a project - all works. A generator is started as soon as on the entrance of PFI1 an impulse comes with PFI0. If an impulse does not act on the entrance of PFI1 - a generator is in the camp-on of signal of start.
Questions:
1. I want to use stepped trig for a management by the start of generator. Why herein and in other modes is a generator started and works without stops?Id est I give one impulse of start - a generator is started. I disconnect a cable from the entrance of PFI1 - but a generator continues to work. Why?In fact did he have to stop and pass to the camp-on of new impulse?I understood so, that at stepped trig a generator gets an impulse and passes to the camp-on of the second impulse.But goes out not so.
How I must do so that did a generator work with breaking or upcast in the initial state between the receivabless of impulses?I am not necessary that he generated constantly in the mode of stepped trig. Mode of single and burst does not suit for my task.

Synchronize acting up

Similar Messages

Maybe you are looking for