Syntax/error checking breaks in FlexBuilder/Flashbuilder with class libraries over Samba?

We have our class libraries on a shared server we access via Samba (and ssh for command line). Sadly, several features seem to fail in both Flex Builder and Flash Builder/Gumbo with this setup. For example, we no longer get automatic syntax and error checking. Anyone familiar with this issue and able to suggest a solution? Thanks!

Be sure you are not mixing -compat=4 and -compat=5 compilations in the same program.
The -compat=4 mode is for compiling very old source code that was written for C++ 4.2 (1996). It provides almost none of the features of standard C++. Don't use this mode unless there is a specific reason why you must.
Do not use -I or -L options that point into /usr/include, /usr/lib, or into the compiler installation area. These directories are always searched by default in the correct order. If you specify them explicitly, you force an incorrect search order.
Be sure you have the minimum patch level of SUNWlibC required by the compiler. The patch includes libCstd, libCrun, libC, libiostream, libdemangle, and some other files. The minimum patch level comes with the compiler, and the Sun Studio installer will install the patch on the system where the compiler is installed.
You also need the patch on every system that runs the compiler, and every system that runs programs created by the compiler.
It is always safe to use the latest SUNWlibC patch. You can download the current patch from
http://developers.sun.com/sunstudio/downloads/patches/index.jsp
But the link failure in your case is due to a missing function from your own code, since it involves a function parameter of a programmer-defined type. I suspect you have either
1. failed to define (provide a body for) the function,
2. declared it inconsistently as inline and not inline,
3. defined the function in a namespace different from the one where it was declared, or
4. failed to link the object file where the function is defined.

Similar Messages

Syntax error in Define entitytype method in MPC class.

Hi,
I am trying to create Odata service by creating new entity type and entity set at service level creation itself (Data model-->Create). Now at the time of generation of classes I am getting syntax error fields are not defined in method, Define Entitytype of MPC class. Could you guide me on how I can generate classes here.
Br,
Venkat Konanki.

Hi,
I am trying to create Odata service by creating new entity type and entity set at service level creation itself (Data model-->Create). Now at the time of generation of classes I am getting syntax error fields are not defined in method, Define Entitytype of MPC class. Could you guide me on how I can generate classes here.
Br,
Venkat Konanki.

Error when unloading xmltype column data with the size over 30kb.

Hello there,
I got the following error when I called a function to unload xmltype data column with the size over 30k.
ERROR at line 1:
ORA-29285: file write error
ORA-06512: at "SYS.UTL_FILE", line 140
ORA-06512: at "SYS.UTL_FILE", line 379
ORA-06512: at "SYS.UTL_FILE", line 1062
ORA-06512: at "ARGCS.ARGCS_UNLOAD_TO_XMLFILE", line 56
ORA-06512: at line 1
Would anyone please help?
Thanks.
tbluong.

Hello there,
I got the following error when I called a function to unload xmltype data column with the size over 30k.
ERROR at line 1:
ORA-29285: file write error
ORA-06512: at "SYS.UTL_FILE", line 140
ORA-06512: at "SYS.UTL_FILE", line 379
ORA-06512: at "SYS.UTL_FILE", line 1062
ORA-06512: at "ARGCS.ARGCS_UNLOAD_TO_XMLFILE", line 56
ORA-06512: at line 1
Would anyone please help?
Thanks.
tbluong.

Idoc in status syntax error check

Hi,
Outbound invoice idoc ended in status 7 (error during syntax check). I check the alloted segment numbers in WE30 and the maximum number alloted segment is not exceeded. Any possible reasons why this scenario is happening?
Thanks for the feedback.

Hi,
Did you check if the segments in the Data Record are in a hierarchial order (ie) Parent segment followed by the Child segments, the Parent segment should alway be mandatory.
I have faced a similar error of this kind and the reason was because of the ordering of the segments.
Thanks
Krithika

Syntax Error with JSON.Parse method to parse SharePoint List Items

Hi All,
I want to get SharePoint List data and bind that retrived data to the JQuery Grid Control.
For this I used SPServices to get the SharePoint List data in SOAP Envelope. Now I need to parse the soap envelope and store the retrieved items in array to pass it to the Grid Control.
While using the JSON.Parse(resporseText) method, Iam consistenly getting an Syntax Error!
Could anyone help me with this ?
Please find the SOAP Envelope I received from SP List as below:
"<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><GetListItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/"><GetListItemsResult><listitems xmlns:s='uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882'
xmlns:dt='uuid:C2F41010-65B3-11d1-A29F-00AA00C14882'
xmlns:rs='urn:schemas-microsoft-com:rowset'
xmlns:z='#RowsetSchema'>
<rs:data ItemCount="2">
<z:row ows_OBNumber='112211.000000000' ows_Project_x0020_Name='Project 1' ows_MetaInfo='11;#' ows__ModerationStatus='0' ows__Level='1' ows_Title='Project 1' ows_ID='11' ows_UniqueId='11;#{FBBCBCF9-666D-42F9-92D7-67188C51BC9B}' ows_owshiddenversion='1' ows_FSObjType='11;#0' ows_Created='2015-01-12 10:25:06' ows_PermMask='0x7fffffffffffffff' ows_Modified='2015-01-12 10:25:06' ows_FileRef='11;#sites/Lists/Projects/11_.000' />
<z:row ows_OBNumber='1122343.00000000' ows_Project_x0020_Name='Project 2 ' ows_MetaInfo='12;#' ows__ModerationStatus='0' ows__Level='1' ows_Title='Project 2' ows_ID='12' ows_UniqueId='12;#{0D772B76-68E4-4769-B6FF-6A269F9C7ABD}' ows_owshiddenversion='1' ows_FSObjType='12;#0' ows_Created='2015-01-12 10:33:48' ows_PermMask='0x7fffffffffffffff' ows_Modified='2015-01-12 10:33:48' ows_FileRef='12;#sites/Lists/Projects/12_.000' />
</rs:data>
</listitems></GetListItemsResult></GetListItemsResponse></soap:Body></soap:Envelope>"
Any help on this will be greatly appreciated.
Thanks In Advance.!

Hi,
According to your description, there is an issue when parsing result from the data retrieved using SPServices.
By default, SPServices returns data as XML format, however, the JSON.parse() method “Throws a SyntaxError exception if the string to parse is not valid JSON”:
https://developer.mozilla.org/en/docs/Web/JavaScript/Reference/Global_Objects/JSON/parse
To extract the data needed from the response, you can either take the demo below for as a reference:
http://spservices.codeplex.com/wikipage?title=GetListItems
Or use the jQuery.parseXML() function:
http://api.jquery.com/jquery.parsexml/
Best regards
Patrick Liang
TechNet Community Support

Syntax error in function call through EF6

I'm trying to call a function from an EF6 query but it seems the compiled statement has a syntax error and the DBMS bails out with "ORA-00933: SQL-Befehl wurde nicht korrekt beendet" (SQL statement ends with an inappropriate clause). As far as I understand the Oracle .NET provider compiles E-SQL to SQL for Oracle in the first place, so how come the statement is malformed?
Here's what EF logs for this particular statement:
Opened connection at 26.01.2015 09:46:14 +01:00
SELECT
"Extent1"."Z_AS" AS "Z_AS"
FROM "DEMO_VIVPFLEGEDOKU"."FN_GETASSESMENTCHILDS_AUSMENGE"(:STRFILTER) "Extent1"
-- STRFILTER: '1' (Type = Object)
-- Executing at 26.01.2015 09:46:14 +01:00
-- Failed in 79 ms with error: ORA-00933: SQL-Befehl wurde nicht korrekt beendet
Closed connection at 26.01.2015 09:46:14 +01:00
This is with VS 2013 Update 4, ODP.NET (ODTwithODAC121021 package) and Oracle 12c DBMS.
The function is defined as
create or replace function fn_GetAssesmentChilds_AusMenge(strFilter varchar2)
RETURN TTabOneNumber pipelined
is
IndexEing PLS_INTEGER;
IndexZ_Aus PLS_INTEGER;
Cursor CursorEing is select column_value from TABLE(fn_splitstring( strFilter ));
Cursor CursorAssessCh is select column_value from TABLE(fn_GetAssesmentChilds_AusInt(IndexEing));
BEGIN
open CursorEing;
fetch CursorEing into IndexEing;
while CursorEing%found
loop
open CursorAssessCh;
fetch CursorAssessCh into IndexZ_Aus;
while CursorAssessCh%found
loop
pipe row (IndexZ_Aus);
fetch CursorAssessCh into IndexZ_Aus;
end loop;
close CursorAssessCh;
fetch CursorEing into IndexEing;
end loop;
close CursorEing;
END fn_GetAssesmentChilds_AusMenge;
Here's the sample code for what I'm trying to achieve:
using System;
using System.Linq;
namespace ConsoleApplication17
   class Program
      static void Main(string[] args)
         using (var db = new Entities())
            var ids = db.GetAssessmentIds("1")
                  .Select(r => r.Z_AS);
            Console.WriteLine(string.Join(",", ids));
For the sake of completeness, here are the relevant parts from the EDMX:
SSDL
        <Function Name="FN_GETASSESMENTCHILDS_AUSMENGE" Aggregate="false" BuiltIn="false" NiladicFunction="false" IsComposable="true" ParameterTypeSemantics="AllowImplicitConversion" Schema="DEMO_VIVPFLEGEDOKU">
          <Parameter Name="STRFILTER" Type="varchar2" Mode="In" />
           <ReturnType>
              <CollectionType>
                 <RowType>
                    <Property Name="Z_AS" Type="number" Precision="10" Scale="0" />
                 </RowType>
              </CollectionType>
           </ReturnType>
        </Function>
CSDL
          <FunctionImport Name="GetAssessmentIds" ReturnType="Collection(CareDocumentation.fn_GetAssesmentChilds_AusMenge_Result)" IsComposable="true">
             <Parameter Name="STRFILTER" Mode="In" Type="String" />
          </FunctionImport>
MSL
          <FunctionImportMapping FunctionImportName="GetAssessmentIds" FunctionName="CareDocumentation.Store.FN_GETASSESMENTCHILDS_AUSMENGE">
             <ResultMapping>
                <ComplexTypeMapping TypeName="CareDocumentation.fn_GetAssesmentChilds_AusMenge_Result">
                   <ScalarProperty Name="Z_AS" ColumnName="Z_AS" />
                </ComplexTypeMapping>
             </ResultMapping>
          </FunctionImportMapping>
Return type:
         <ComplexType Name="fn_GetAssesmentChilds_AusMenge_Result">
            <Property Name="Z_AS" Type="Int32" />
         </ComplexType>
Any ideas as to what is going on here?

Hello Thanvi
It seems that you need to apply the OSS note 1041283:
FUNCTION cacs_bupa_pai_special_cacsb1.
*"*"Lokale Schnittstelle:
DATA: lt_but0bk TYPE TABLE OF but0bk WITH HEADER LINE.
CALL FUNCTION 'BUP_BUPA_BUT0BK_GET'
       TABLES
            t_but0bk = lt_but0bk.
* einmal vorhanden -> nehmen; nicht vorhanden -> Feld muss leer sein
* mehrmals vorhanden -> Mussfeld
READ TABLE lt_but0bk INDEX 2.
IF sy-subrc NE 0.
*    READ TABLE lt_but0bk.          "NOTE 1041283   " <<<<<<<<<
     READ TABLE lt_but0bk FROM lt_but0bk.            " <<<<<<<<<
    IF sy-subrc = 0.
      cacs_s_bupaw-bank_id = lt_but0bk-bkvid.
    ENDIF.
ELSE.
Regards
Uwe

MergeField Syntax error issue

I am attempting to print an interest rate in a merge document. MERGEFIELD PNT_12 contains the number 4.625. When I hit [alt] 9, the document says (!Syntax Error,<) but still works somewhat. Here are examples and results. Any thoughts would be appreciated.
{=INT({MERGEFIELD PNT_12})\# 00}
{QUOTE {=INT({MERGEFIELD PNT_12})\* CardText \*Caps
When I press
[alt] 9 the above statements show
!Syntax Error, <
!Syntax Error, <
When the document is saved with the statements shown as !Syntax Error the results are:
four
04
Notice that the f is lower case even though there is a \*Caps switch.
When the document is saved with the mergefields toggled to see the Mergefield codes rather than the !Syntax Error, the results are:
Four
04
Notice that the f is now capitalized.
Question: What is wrong with the syntax?

Word has two representations of the mergefield {MERGEFIELD PNT_12}
One is {MERGEFIELD PNT_12}, and the other is «PNT_12» , where the << and >> are each single chevron characters (ascii 171 and 187). Normally, you wil never see the «PNT_12»
representation when it is nested inside a field such as { =INT() }. Word just deals with it, and provides the correct answer.
So what I suspect is happening is that Calyx is setting the value of PNT_12 to "<<PNT_12>>", possibly using two less than characters "<" and greater than characters ">" during preview, then inserting the actual value when you merge.
That would explain most of what you are seeing except the lower case result. As for that, I suppose it is possible that Calyx is interpreting the entire field code itself, but getting it wrong.
Peter Jamieson

Count Distinct Over Partition Syntax Error

Count(Distinct [field]) over (partition by [field2]) returns a syntax error at the key word distinct
Count(all [field]) over (partition by [field2]) compiles fine
I am writing a query to count the number of clients a sales rep has when the sales rep represents multiple companies (ad agency). I need a count of the clients each company has and a distinct count that each rep has. A client may be assigned to multiple companies.
Is a distinct count supported with partitions?

Until we wait for the full implementation of the OVER clause, you can
try something like this:
CREATE TABLE Foo (
fookey INT PRIMARY KEY,
company VARCHAR(30),
sales_rep VARCHAR(30),
client VARCHAR(30));
INSERT INTO Foo VALUES(1, 'ABC Corp.', 'Joe', 'Client1');
INSERT INTO Foo VALUES(2, 'ABC Corp.', 'Joe', 'Client2');
INSERT INTO Foo VALUES(3, 'ABC Corp.', 'Peter', 'Client2');
INSERT INTO Foo VALUES(4, 'DEF Corp.', 'Joe', 'Client1');
INSERT INTO Foo VALUES(5, 'DEF Corp.', 'Joe', 'Client3');
SELECT fookey, company, sales_rep, client,
MAX(rk1) OVER(PARTITION BY sales_rep) AS rep_distinct_client_cnt,
MAX(rk2) OVER(PARTITION BY company) AS company_distinct_client_cnt
FROM (
SELECT fookey, company, sales_rep, client,
DENSE_RANK() OVER(PARTITION BY sales_rep ORDER BY client) As rk1,
DENSE_RANK() OVER(PARTITION BY company ORDER BY client) As rk2
FROM Foo) AS F;
fookey company sales_rep client rep_distinct_client_cnt
company_distinct_client_cnt
1 ABC Corp. Joe Client1 3 2
2 ABC Corp. Joe Client2 3 2
3 ABC Corp. Peter Client2 1 2
4 DEF Corp. Joe Client1 3 2
5 DEF Corp. Joe Client3 3 2
Plamen Ratchev
http://www.SQLStudio.com

Syntax Error with EXPORT statement in ECC 6

Hi All,
I have one issue with EXPORT statement syntax.
I have declared data like below:
DATA: BEGIN OF mem_id,
          mandt LIKE sy-mandt,
          uname LIKE sy-uname,
          modno LIKE sy-modno,
        END OF mem_id.
export the memory id
    EXPORT E_VBKOK XANZPK TEXTTAB XBOLNR TO MEMORY ID MEM_ID.
When I am checking the syntax error i am getting like "MEM_ID" must be a character-type field (data type C, N, D or T). by "INTERFACE". by "INTERFACE". "INTERFACE". by "INTERFACE". by "INTERFACE".
I know this statement would be like IMPORT ITAB TO JTAB FROM MEMORY ID 'table'. So I have written like below
EXPORT E_VBKOK XANZPK TEXTTAB XBOLNR TO MEMORY ID 'MEM_ID'. But still it is throwing an error.
Can you please let me know how can I resolve this?
Regards,
Jyothi CH.

Hi Jyothi,
data: l_var type string.
concatenate '6' '8' into l_var separated by space.
export l_var to memory id 'BB'.
Here we have to declare the type(structure) for l_var not for BB
and in another program
data:l_var type string.
import l_var from memory id 'BB'.
write : l_var.

Use Of "#EC CI_EXECSQL in ABAP with EXEC SQL. Statement giving Syntax Error

Dear Gurus,
I have encountered an issue while trying to remove warning for using Native SQL statement using pseudo comment "#EC CI_EXECSQL
The thing is like this -- i have used follwing native sql command in abap.
EXEC SQL.
    CONNECT TO 'SURROUND_DB'
ENDEXEC.
Now when i am checking this code in code inspector it is showing a warning with information below
CA CL_CI_TEST_CRITICAL_STATEMENTS0006
Code Inspector
Critical Statements
Use of Native SQL
Authorization checks cannot be appropriately run using EXEC SQL and should be carried out at program level.
The message can be hidden using the pseudo-comment "#EC CI_EXECSQL
Use of exceptin handling section for that warning showing me to use :
The message can be hidden using pseudo
comment      "#EC CI_EXECSQL
Now when I am using "#EC CI_EXECSQL in the abap like below :
EXEC SQL. "#EC CI_EXECSQL
    CONNECT TO 'SURROUND_DB'
ENDEXEC.
It is giving syntax error
The text literal ""#EC CI_EXECSQL        " is longer than 255
characters.Check whether it ends correctly.
Please provide the guideline to resolve this issue.
Thanks & regards
Saifur Rahaman.

Hi Saifur,
You can remove the warning using the following syntax:
EXEC "#EC CI_EXECSQL
SQL.
    CONNECT TO 'SURROUND_DB'
ENDEXEC.
At least, it worked fine for me when using OPEN CURSOR, SELECT, FETCH and so on statements.
The way to use the pseudo comment is not very intuitive, but at least for my examples worked fine.
I hope this may help you.
Best regards,
Edgardo G. König

Syntax Error with Table Parameter (type: ANY) when Creating Function Module

Hello experts,
I want to create a function module with a table parameter and table type is ANY. But when I check (Ctrl+F7) this function module, syntax error occurs - "In this statement, the internal table "MSG_TABLE_ITEM" must have the type "STANDARD TABLE"."
Could anyone tell me what the wrong is? And how can I fix it?
Thanks,
Shelwin

Hi,
For table parameters, you can only pass
MSG_TABLE_ITM TYPE STANDARD TABLE
or
MSG_TABLE_ITM ( don't fill other columns TYPING ASSOCIATED TYPE ).
For reference check FM 'GUI_UPLOAD' - Table parameters
Regards,
DPM

MySQL syntax error with TestStand 4.0 database logging

I had been using MS Access database to log results which worked fine but the access database is too limited. Switched to MySql. Database works fine and I can query it from Visual C++ and was able to create all my result tables fine from TestStand.
I get a syntax error when actually trying to log results and it has to do with either a missing quote or and extra quote, I can't quite tell. I thought I saw a post on this somewhere but can't find it now. Here is the complaint from TestStand:
An error occurred calling 'LogOneResult' in 'ITSDBLog' of 'zNI TestStand Database Logging'
An error occurred executing a statement.
Statement: UUT_RESULT.
[MySQL][ODBC 3.51 Driver][mysqld-5.0.45-community-nt]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT VALUES' at line 1
Description: [MySQL][ODBC 3.51 Driver][mysqld-5.0.45-community-nt]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT VALUES' at line 1
Number: -2147467259
NativeError: 1064
SQLState: 37000
Reported by: Microsoft OLE DB Provider for ODBC Drivers
Description: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
Number: -2147217887
NativeError: 0
SQLState: 37000
Reported by: Microsoft OLE DB Provider for ODBC Drivers
Source: TSDBLog
And here is all that appears in the MySql logfile:
INSERT INTO UUT_RESULT DEFAULT VALUES
070914
You can't see it here but the string is truncated after the word VALUES. The next line starts with the odd number.
Any ideas?
Thanks,
Bill Peters
BAE SYSTEMS

Sure. There were two bugs in the ini file that contains the default TS schemas (I think it was Default_Database_Options.ini or like that...).
Anyway the table description for STEP_NUMERICLIMIT had for it's command line INSERT INTO MEAS_NUMERICLIMIT. I guess TestStand looked at that and said hmm I better create that table too. Then later down the page when you try to create MEAS_NUMERICLIMIT it says the table already exists even though it is empty. The generate SQL button builds a bad file and then the database viewer creates a bad database. I would have to go into MySql and drop the database. I had to save the schema under a custom name, edit it read it back in, generate a new SQL file, but then it would still fail validation because the ini files don't get updated until you exit TestStand. So basically I did this process 3 times before I got it right.
It's wasn't a big deal but it's amazing how a little thing can cause a lot of work.
The second bug, I'm not certain was initially in the file or somehow got set on the fly. There was a random int statement at the very end of the SQL table description for UUT_RESULT. It was also in the schema INI file. Since the int had no name and occurred in a odd place, it created a syntax error in MySql. Same fix as above.
But like I said it's working great now. I like this approach because I serve it to the net with Apache and parse the database with simple PHP scripts.
Thanks,
Bill Peters
BAE SYSTEMS

How to check syntax errors in ABAP Queries

HI Guys,
How to check syntax errors in ABAP queries, Can please provide the T-Codes.
Advande thanks to everybody.
Thanks,
Gourisankar

Hi
with these you can check syntax errors and performance points
Hi
these all are doing t he same thing that is checking the program for better performance
Tools for Performance Analysis
Run time analysis transaction SE30
SQL Trace transaction ST05
Extended Program Check (SLIN)
Code Inspector ( SCI)
Run time analysis transaction SE30 :This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05: The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on a particular database table of the ABAP program would be mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
Extended Program Check
This can be called in through transaction SE38 or through transaction SLIN. This indicates possible problems that may cause performance problems.
Code Inspector (SCI)
You can call the Code Inspector from the ABAP Editor (SE38), the Function Builder (SE37), the Class Builder (SE24), or as a separate transaction (SCI).
The Code Inspector indicates possible problems. However, note that, especially with performance issues: There is no rule without exception. If a program passes an inspection, it does not necessarily mean that this program will have no performance problems.
reward if usefull

Requirement to check the syntax error of Customize SAP Objects in existing landscape.

Hi All,
I have two requirements which are a s follows :
1 ) Check the syntax error of customize SAP Objects in existing landscape except using the Tools which are already given by SAP( Example : Code Inspector , Extended Syntax Check etc.). I have to create a program to fulfill this requirement.
2 ) In case of SAP Upgrade is it possible to know the syntax error in advance that the existing source code will not work in the upgrade version?
Please help me out to solve my issues. Thanks in advance.

Dear Abhishek,
For the code inspector, the syntax check and the extended syntax check, you can define a set of objects to be teste thru SCI:
Go to SCI
In the block 'Object Set', you can create a set. For ths, you have to give it a name, select with the icon left of the textbox if this is a global (for all users) or a local set and click the create Icon.
in the next field, you can define which objects ... are part of the object set.
When using SCII to execute the code inspector, you can specify this set instead of a transport(s) or programming objects.
To run only the syntax check and or the extend syntax check, you can specify a check variant in SCI (third screen block) which contains only those tests or you can in SCII uncheck all tests except those 2.
Regards,
Hans

Firefox generates a javascript syntax error with ![CDATA[

I have an app written in HTML5, SVG and javascript that ran until today. I uploaded 3.6.10, and now javascript reports a syntax error for the <![CDATA[ tag. Even when I remove the tag, the SVG will not run. I haven't made ANY changes to the app, just updated Firefox. What changed to break this?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
A good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the MozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25
You need to post a link to the website or post relevant parts of the code.

Syntax/error checking breaks in FlexBuilder/Flashbuilder with class libraries over Samba?

Similar Messages

Maybe you are looking for