System ack in Asynchronous service

Hello friends,
when i get an Asynchronous call in an inbound proxy through XI,i want to trigger
an system ack to notify the message has reached the consumer,can any one provide
a sample code to do this.
thanx
kaushik

Hi Sanju,
Thank you so much for responding. The user was actually created new in the workflow and there were some missing authorisations. The Basis team fixed the authorisation and the issue is now resolved.
Really appreciate the help.

Similar Messages

Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
Florian

Is there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek

Failed to open the console and System Center Data Access Service wont start - SCOM 2012

Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=============================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=============================================================
Failed to connect to server ' xxxxx'
Date: 16/09/2013 20:36:16
Application: Operations Manager
Application Version: 7.0.8560.0
Severity: Error
Message: Failed to connect to server 'xxxxxx'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could
be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
=============================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
================================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Yes, i change the credentials, but doesnt work.
Yes, i put the events in the
main question!
Events Logs:
=======================================================
Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=======================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Adding new Remote System unavailable in Web Service Request

Hi,
I created a CRUD Web service from a table using web service generator.I added a new remote system to the repository.When I invoke the create operation (which has key mapping "Yes"),it says "Remote System not found in the repository"
I am able to view the Remote System via Data Manage though.
Any ideas?
Regards,
Premjit

Hi Premjit,
When did you added new remote system?
Before generating web services.
Or After generating web services.
If you have added remote system after generating web services.
Then try re-generating web services using web service generator.
Regards,
- Shailesh

Windows 8 system doesn't get internet, says system event log on service has some problem of STOP 0xC000021A error which system restarts very slowly

Hi, my system runs on windows 8 on hp laptop envy series. All of a sudden, system event log on service stopped, errors which prevented the system to log on services. It displayed error of STOP 0xC000021A when i use system restore to roll back to previous
configuration. Also when I tried to refresh my pc, it says i can't do changes as log in was switched to prevent the changes by notification.I don't know what to do next, I tried to put recovery dvds which I made when system was bought, now not at all working.
Internet is not active, not able to resolve by trouble shooting and system taking lot of time to get dsktop. Previously I used to get my desktop in 10 seconds. Now its 10 min. May be I m infected with virus. My files, they are there. I tried to transfer some
files by pendrive to another system, now the new system(where i put my files in another system) crashed, windows 7 system which does not display desktop, icons etc and not at all workable.
Also in my hp system, i m unable to open control panel. if its opened, it will not go off, when i use task manager, it says explorer and shuts down. I had to force restart the system. Please resolve something to get my hp laptop workable. I m waiting for
my MS thesis to be working on that. My files are locked and no way to transfer, I fear of infected by virus to another computer also.
Pls give instructions to hw to set my hp laptop at the earliest without losing any of the files. Idon't want to reinstall and lose all the data for timebeing. Else, inform me the option for copying data safely. I tried to change the adv startup and recovery
by changing the boot sequence by DVD but this also shows error 0xC000021A and asks us to see the details. I didn't understand all this. Pls help asap.
Thanks
venkata
STOP 0xC000021A

MV
If you can boot either from the win 8 dvd or in safe mode we need the DMP files
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

SQL MP - System Center Management Health Service Credentials Not Found Alert Message

Hi Dears,
I have read so many open cases, but I could not find solution to my situation...
Error: System Center Management Health Service Credentials Not Found Alert Message
Desc are 1 of those 2:
An account specified in the Run As profile "Microsoft.SQLServer.SQLDiscoveryAccount" cannot be resolved.
An account specified in the Run As profile "Microsoft.SQLServer.SQLDefaultAccount" cannot be resolved.
Okay, I am fine, I verify the RunAs account configuration and yes this is the problem... I was able to solve it for those SQL running servicec account using domain user account, I created the run as account, and assoistte it with SQL profiles,
and it is fine....
BUT, what about my 8 SQL Servers running SQL Service Account under System and Network accounts,
so how Can I add this coz I cannot target all objects,so what shall I target (Object Health Service or WHAT)?
Please I need it step by step coz I am not able to handle this issue....
Thank you Guys

Hi,
If you have not distributed the Run As Account to a system, but we discovered SQL on it, you will see the error message.
This condition may have occurred because the account is not configured to be distributed to this computer. To resolve this problem, please distribute the account to this computer if appropriate. You can refer to the following blog to distribute the Run As
credential.
Niki Han
TechNet Community Support

How to make use of asynchronous service in CAF development

Hello SDNs,
How can we make use of asynchronous service in CAF development;
Actually i am new to CAF development; my business requirement suites for the service provided by SAP. But the service provided is asynchronous; is it not possible to use the asynchronous service in my CAF application? if it is possible, can any one please tell me the drawbacks of using it!
You help would be highly appreciated.
Thanks,
Sireesha.B

Hi,
>> I have some portal service and how to use that in the web dynpro application.
Yes. U can use Portal service in webdynpro. Check the link given by subathra.
>> and also what is the main diff between Portal Component and web dynpro application
Portal Components are components designed to run in portal server while webdynpro application can run in J2EE WebAS.
>> do we required portal to run web dynpro application.
No for general cases. Just WebAS is sufficient to run webdynpro appl. But if u use portal service in ur webdynpro appl, then make sure both (portal service and webdynpro appl) run on same J2EE engine. That is mandatory.
Regards,
Vijai

System automatically clears the service of half amount of total amt in po.

I whenever comes in ml81n to create the entry sheet against purchase order,and after selecting all the services to be entered there,the system automatically clear the service of half amount of total amount in po.
can some one tell me to get rid of this problem.
Regards:Vijay Kumar

In the net value field the system is bringing the half of the amount of total value in ml81n.And that is not changeable.However the value at the purchase order in net and total is the same.
Regards:VIJAY

SAP PI system Ack

After reading the available SAP's documentation regarding the above,
turning it over,upside down,and undereaith ,
I have found no documentation regarding
the customization\Development required in XI in order to produce such an Ack from XI as a standalone.
I am reffereing explicitly to a File adapter system Ack on the sender side or using SAP PI IDoc adapter
without the colaboration of SAP Back End (Not using ALEAUDIT back from SAP ERP)
Also mentioned in sap.help that -
"Receiver adapters that run on the Adapter Engine support system acknowledgments and system error acknowledgments if they are requested by the sender"
My quesntion is - if I have a file to file scenario,can I get a system Ack from the reciever adapter back
to the sender adapter and can I use this data to be writen into a flat file?
Appriciate you view on the above.
Only ansswers with relevance will be acquitted with points.
Nimrod Gisis

Hi,
>>>I am reffereing explicitly to a File adapter system Ack on the sender side
I don't get this one - ack on sender ?
>>>or using SAP PI IDoc adapter without the colaboration of SAP Back End (Not using ALEAUDIT back from SAP ERP)
only SAP backends create acks it's not PI's functionality
Regards,
Michal Krawczyk

How to enable "Dedicate system resources to server services" option?

I am unable to check the "Dedicate system resources to server services" option in Server.app. When I click the checkbox, I am prompted to restart. Upon restarting, the box remains unchecked. I have tried multiple times to enable this option, yet it always fails. Any help appreciated. Thanks.

Check the diagnostic output during verbose booting to find out what's going on.
from the man page:
NAME
     rc.server -- server-specific boot initializations
SYNOPSIS
     rc.server
DESCRIPTION
     rc.server is the server-specific command script invoked by launchd(8) to tune system parameters before system processeses are started.
     launchd guarantees that rc.server is run before services are bootstrapped so that resource limits are inherited by all system processes. Therefore, actions in this script only have read access to the root filesystem and logging facilities are not available. Output is directed to the system con-
     sole and may be viewed using verbose boot.
     This script and specific resource settings may change at any time, such as by hardware reconfiguration or software updates. System specific overrides should be done in sysctl.conf(5), launchd.conf(5), or service specific launchd.plist(5) configuration files.
     The following sysctl(8) settings are among those that may be tuned by this script:
           kern.ipc.somaxconn
           kern.maxproc
           kern.maxnbuf
           kern.maxvnodes
           kern.maxfiles
           kern.maxprocperuid
           net.inet.tcp.delayed_ack
     rc.server will only be executed to tune the system if it is determined to be a server configuration.
FILES
     /etc/rc.server
DIAGNOSTICS
     Since rc.server is invoked before system logging is available, diagnostic output is only available to console during verbose boot.

ERP system type for ESOA service

Dear Experts,
What system type we need to use for ERP system to use SOA services in SRM scenarios like plan driven procurement, service procurement?
We are currently on SRM 7.01 and backend system ECC 6.0 Enhpk 5. We have used the system type ERP_3.0
Now, we are using the BAPI BAPI_PO_CREATE1 to create po out of shopping cart in the ECC system. If we modify the system type to say ERP_4.0 or ERP_5.0, will it still use the BAPI to create PO in the backend system ?
Please, I need your expert comment on this.
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hello,
If you maintain the ECC system type as ERP_3.0 (sap_appl 603 for ECC), RFC will be used to create backend PO in ECC.
If you maintain ERP_4.0 (SAP_APPL 604) or ERP_5.0 (SAP_APPL 605), XML is used instead. In this case, you have to have PI installed.
If you do not have PI and still want to create POs via RFC, you should maintain ERP_3.0, but not all functionalities provided in SRM 7.0 will be used.
Regards,
Ricardo

System center data access service crashes with event id 26339 ad 26380 in SCOM 2012 Sp1 RTM

hi all,
I have deployed scom 2012 sp1 rtm on Os 2012 std and database is on another VM Machine having SQL 2012 sp1 with OS 2008 R2 SP1 std, suddenly sql vm get stopped and unable to start , so I have delete it from hyper-v 2012 console and imported the VM again
in Hyper-0S 2012 cluster.
Now, System centre data access service get crashed again and again with mentioned events
event 26339, OpsMgr SDKService
event 26380, opsmgr SDkService
An exception was thrown while initializing the service container.
Exception message: Initialize
Full exception: HTTP could not register URL
http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file
because it is being used by another process
   at System.Net.HttpListener.AddAllPrefixes()
   at System.Net.HttpListener.Start()
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   --- End of inner exception stack trace ---
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener)
   at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback)
   at System.ServiceModel.Channels.HttpChannelListener`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at Microsoft.EnterpriseManagement.ConnectorFramework.ServiceDataLayer.ConnectorFrameworkDataAccessChannel.Initialize()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
Kirpal Singh

Hi Kirpal
Can you try this it might help as its an known issue of getting event id 's 26361,26380 try out & lets see if it helps.
The manifest files are located on the RMS at the \Program Files\System Center Operations Manager 2007\ root directory. The manifest files will need to be edited for the config and sdk service on affected RMS. The file names are:
Microsoft.Mom.Sdk.ServiceHost.exe.config
Microsoft.Mom.ConfigServiceHost.exe.config
In between the EXISTING <runtime> and </runtime> lines – you need to ADD a NEW LINE with the following:
<generatePublisherEvidence enabled="false"/>
This solution disables CRL checking for the specified execute-ables, permanently.

System error in asynchronous method start during release of PR

Hi,
When trying to release the purchase requisition out of workflow inbox, information message is displayed as "System error in asynchronous method start". After clicking enter to ignore the information message and trying to release the purchase requisition, the same message pops up again.
Appreciate if someone can please provide help in resolving the issue.
Thank you.

Hi Sanju,
Thank you so much for responding. The user was actually created new in the workflow and there were some missing authorisations. The Basis team fixed the authorisation and the issue is now resolved.
Really appreciate the help.

How to make a Mediator deal with calling an external Asynchronous Service

Hi,
Using TP 4.
I want my Mediator to invoke an Asynchronous Service that is external to the composite application. But I do not know how to get the reply from that service back into my Mediator.
I have worked with the sample of calling an asynch BPEL component within the same composite - that is fairly easy to accomplish.
What how can I tell the external service to invoke a callback porttype on my Mediator. Can the SCA container work out the correlation between the external service and the correct instance of the SCA composite? Should the Mediator publish the callback interface as an external service at the SCA Composite level? If so - how would the correlation work? If not, how does it work?
Any suggestions - even the statement that I always need a BPEL component in between that will support correlation with external asynch services, if that is the case - will help.
Thanks.
Lucas

Kylie, welcome to the discussion area!
Cable modems behave differently than DSL modems in that they will "remember" the last device that they have associated with. Your modem is "remembering" your MacBook and when you connect the TC, the modem won't connect because it "remembers" the MacBook.
You need to make the modem "forget" a previous device whenever you make a change in the device that is directly connected to the modem. Here's how:
Push the reset button on the modem if it's present
Pull the power cable on the modem
Pull the battery from the modem if it is easily accessible
Leave the modem powered down for 25-30 minutes
Power down the rest of your network as well
After the wait period, connect the modem to the WAN port on the TC with an ethernet cable
Power up the modem first and let it run for 3-4 minutes by itself
Then power up the TC the same way
Power up the rest of your network the same way
Depending on how you had your TC configured with the DSL modem previously, you may need to make a few changes in the settings.
Post back on your progress.
Message was edited by: Bob Timmons
null

BPEL and Axis2 Asynchronous service

Does anybody have develope Oracle BPEL Asynchronous process and Axis2 Asynchronous service.
Can somebody share their expreince??
Thanks
Gopal

I have looked at BPELCallingAsyncAXIS sample it works fine with Axis 1.3, I was using this sample to start with Axis2.
But BPELCallingAsyncAXIS sample required otn-jaxrpc.jar libaray which implement ws-addressing and asynchronous service call to BPEL for Axis 1.3.
And otn-jaxrpc.jar library require all jaxrpc classes specific dependency.
I am not sure whether this library otn-jaxrpc.jar is production ready and how stable it is
Axis2 already have ws-addressing and asynchronous webservice implementation so I don't need to rely on otn-jaxrpc.jar
And I think for future webservice (document style) development we will be using axis2 b'cos of WS-* support , Asynchronous webservice
Thanks
Gopal

System ack in Asynchronous service

Similar Messages

Maybe you are looking for