System Configurator is not working for R&A repository upgrade
Hello All,
Can someone give us some direction on this ?
We are attempting to configure R&A database using upgrade from 9.3.3 option and providing the database connection details. On the next screen, the path of the RM directory provided is a unc path: \\server\RM1
UNC path provided as this is a clustered environment.
\\hyp11webt1/RM1 points to apps\Oracle\Middleware\user_projects\epmsystem1\RM1 which the user has read/write access.
The user account running the EPM system configurator is the same user that installed EPM on the windows server.
The Config tool hangs when trying to configure the R&A database.
We ran the configuration utility at 2:24 am.
The configtool.log contains the following entries:
[2012-03-23T02:26:51.930-04:00] [EPMCFG] [TRACE] [EPMCFG-05922] [oracle.EPMCFG] [tid: 19] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.sw.SoftwareRegistry] Adding Hyperion Home entry...
[2012-03-23T02:26:51.930-04:00] [EPMINS] [NOTIFICATION] [EPMINS-00006] [oracle.EPMINS] [tid: 19] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] Wizard state is: SummaryState
[2012-03-23T02:26:57.290-04:00] [EPMINS] [TRACE] [EPMINS-00015] [oracle.EPMINS] [tid: 11] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.wizard.AbstractWizardAction] Invoked action: navigation.next
[2012-03-23T02:26:57.290-04:00] [EPMINS] [NOTIFICATION] [EPMINS-00006] [oracle.EPMINS] [tid: 20] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] Wizard state is: RunnAllTasksState
[2012-03-23T02:26:57.399-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01000] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks]
[2012-03-23T02:26:57.399-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01000] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks]
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.StdStreamsCaptureUtil] Trying to create log files for stdout/stderr in directory: D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.LoggedOutputStream] Trying to set logStream..
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Trying to set backingStream..
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [TRACE] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Wrote buffered data.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [TRACE] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Flushed backingStream.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Setting backingStream: succeeded.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.LoggedOutputStream] Setting logStream: succeeded.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.LoggedOutputStream] Trying to set logStream..
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Trying to set backingStream..
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [TRACE] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Wrote buffered data.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [TRACE] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Flushed backingStream.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Setting backingStream: succeeded.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.LoggedOutputStream] Setting logStream: succeeded.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.StdStreamsCaptureUtil] Created log files for stdout/stderr.
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.StdStreamsCaptureUtil] stdoutLogLocation = D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configTool-stdout.log
[2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.StdStreamsCaptureUtil] stderrLogLocation = D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configTool-stderr.log
[2012-03-23T02:26:57.461-04:00] [EPMCFG] [TRACE] [EPMCFG-02015] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Creating product component(s) in the HIT Registry (if not created yet) for all selected product(s)...
[2012-03-23T02:26:57.493-04:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = SHARED_SERVICES_PRODUCT
[2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = SHARED_SERVICES_PRODUCT
[2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = RA_PRODUCT
[2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = RA_PRODUCT
[2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = FINANCIAL_REPORTING_PRODUCT
[2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = FINANCIAL_REPORTING_PRODUCT
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Selected product is Foundation:Foundation
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: component name is foundation1
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: component name is foundation1
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Entering getOracleComponentArgs
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Registration file for Foundation is missing
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Component jar file null does not exist
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Calling getArgs
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Entering getArgs
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Calling onGetArgs
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Exiting getArgs
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Exiting getOracleComponentArgs
[2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Path for instance name is D:\Oracle\Middleware\user_projects\epmsystem1 vs path returned is epmsystem1
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Entering getOracleComponentArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Registration file for Foundation is missing
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Component jar file null does not exist
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Calling getArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Entering getArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Calling onGetArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Exiting getArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Exiting getOracleComponentArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Entering getOracleComponentArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Registration file for Foundation is missing
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Component jar file null does not exist
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Calling getArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Entering getArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Calling onGetArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Exiting getArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Exiting getOracleComponentArgs
[2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Path for instance name is D:\Oracle\Middleware\user_projects\epmsystem1 vs path returned is epmsystem1
[2012-03-23T02:27:01.743-04:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] trace: The component type 'Foundation' is not supported. Valid component types are: [EssbaseServer, OCM, OHS, WebCache]
[2012-03-23T02:27:01.743-04:00] [EPMCFG] [TRACE] [EPMCFG-02147] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] Oracle Instance already exists at D:\Oracle\Middleware\user_projects\epmsystem1.
Try the following:
1.-Set your test motor to encoder feedback instead of analog feedback.
2.-Load a velocity move on the axis for the test motor.
3.-Set the following error limit on you axis to 0 (disable following error).
4.-Use the load torque limit function to limit the amount of torque the 73xx PID loop will generate,this value is in volts, so you will need to do a correlation between the voltage output from the controller and the torque reported by your torque cell.
5.- Start the load motor.
6.-Engage the cluch.
7.-Start the velocity move on the test motor, you will see the torque ramp up to the torque limit.
8.-Call the load torque limit function on the fly to vary the torque setpoint to where you want it.
Similar Messages
-
System update does not work for x200s
Hi All,
The problem is that ThinkVantage System Update can not find any packages.
("no package applicable to your system were found")
ThinkPad X200s 7466-3UG
Windows7 Professional
I have installed the version 4.01.0015 from 15 Aug 2011 (systemupdate401-2011-07-25.exe)
Could you please suggest anything?Ok than, the problem is not in registry.
Please take a look at this thread, might be of help.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/System-Update-not-getting-updates/td-p/655779
Too, try uninstalling System Update (completely remove it) install Windows 7 sp1 (if not done already) and reinstall System Update again. Do not restart immediately, wait a few moments and than restart. See what's happens.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode. -
SAP_MANG Evaluation Path not working for MSS after ECC6 Upgrade
Hello All,
We are upgrading to ECC6 and still using an older version of the java/HTMLB MSS Business Package. We are seeing strange results in the vacancy request overview iview (team viewer like component) which is using a view driven by SAP_MANG Evaluation Path.
SAP_MANG looks like this...
10 * B 008 * S
20 S A 012 * O
30 US A 208 * P
Our View is ZRCPOS using...
Eval Path - SAP_MANG
Eval Objects - O_NACH_S
Initial Evaluation Depth - 3
Column Group - ZRC_VACREQ_OV
Header Type - RC_VAC_HEADER
The iview is meant for position maintenance and should show a dropdown of orgs. When an org is selected a list of positions/holders is shown to modify, delimit, etc. The problem is that in the dropdown "Select organizational unit to display positions" instead of...
Test Org 1
Test Org 2
We have...
Test User1
Test Org 1
Test Org 2
...so the user us shown as an org. Right off I suspected the upgrade to MSS 60.1.22 (the newest version of the old Business Package) so I installed the older versions of the components and the actually still worked but also showed this condition. So I have ruled out the java side as a source of the problem.
Looking at HRP1001 I see the following relationships among suspect objects.
Object P 1234567 to Object S 9876543 via B008
Object S 1234567 to Object O 9876543 via A012
no relationships US to P via A208
Given the Eval Path above, does anyone have any idea why this would display this way or have a suggested approach to solve.
Thanks,
Doug>
Doug Steckel wrote:
> Hi Ranganath,
>
> Thanks for the quick reply. Yes the Skip flag is set on relationships 10 and 30. I would also think that would prevent this but it is not.
>
> Thanks,
> Doug
not all relationships represent physical data records in the database. some are derived and without looking at the system, I believe the US 208 to P is a derived relationship.
Are you sure all the users you are testing with have a proper sy-uname setup for all respective pernrs in PA0105? -
System restore is not working for my Itouch. I am getting a picture of a white cord and and arrow pointing to Itunes logo... any suggestions?
It sounds like there is definitely a system problem. The whole OS seems to be messed up.
Do you have an MS Windows 7 disk?
In such case you could start the Windows 7 Startup Repair process using the MS Win 7 disk.
Boot from Win 7 disk, after the temporal files has been load, you should get and window where you could choose between the OS installation and other options. The second option called Repair you Computer is the one which would be needed to get the system repaired.
Then wait for System Recovery Options to locate Windows 7 on the HDD.
Then choose the Windows 7 installation and then the next window should appear providing the option to repair the system Startup Repair
But in case this workaround would not help you, the system should be reinstalled once again using Toshiba Recovery disk -
Link does not work for
End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
How do we get Cisco to fix?
see attachmentGive it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page. -
I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!
Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
Mylenium -
Software Update Point Switching is not working for some Clients
Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this. -
Additional Fields for ESS-Business Card Not Working for Certain Countries
Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please... -
HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.
HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Systems preferences does not work
My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding.... Help.....
Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
Any help would be greatly appreciated!
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.8) 23" Cinema Display and 8 gig on G5 Dual
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.7) 23" Cinema Display and 8 gig on G5 Dual -
SPSecurity.RunWithElevatedPrivileges Not Working for Read Only Permissions Users
I have the following code in a method that generates tabbed web parts on any page in SharePoint 2010.
The problem is that it will not work for users who have Read access only on a SharePoint site. It will work when those users have Contribute access.
So even though I have elevated permissions in the code it does not actually elevate the permissions at the point where it is needed.
if (panel != null)
try
using (SPLimitedWebPartManager wpManager = SPContext.Current.Web.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
try
// Elevated previleges required for EXPORT and IMPORT. Else Users with normal read access will get errors.
SPSecurity.RunWithElevatedPrivileges(delegate()
// Retrieve the web part titles in the ConfigureTabs XML string for this tab.
var webPartTitles = from t in xDocument.Descendants("webPart")
where (string)t.Parent.Attribute("name") == (string)e.Item.DataItem
select (string)t.Attribute("title");
foreach (string wpTitle in webPartTitles)
foreach (System.Web.UI.WebControls.WebParts.WebPart webPart in wpManager.WebParts)
// Find the matched closed web part in WebParts collection
if (webPart.Title == wpTitle && webPart.IsClosed == true)
string errorMessage;
//ADD EXPORT PROPERTY
webPart.ExportMode = WebPartExportMode.All;
MemoryStream stream = new MemoryStream();
XmlTextWriter writer = new XmlTextWriter(stream, System.Text.Encoding.UTF8);
// Export the closed webpart to a memory stream.
wpManager.ExportWebPart(webPart, writer);
writer.Flush();
stream.Position = 0;
XmlTextReader reader = new XmlTextReader(stream);
// Import the exported webpart.
System.Web.UI.WebControls.WebParts.WebPart newWebPart = wpManager.ImportWebPart(reader, out errorMessage);
reader.Close();
writer.Close();
// Show the imported webpart.
panel.Controls.Add(newWebPart);
break;
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please check your XML configuration for error. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please Check SPContext.Current.Web is not null. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
This snippet of code was originally pulled from a microsoft technet article on creating Tabbed web parts "the correct way" but it doesn't work in all scenarios.
Is there a way to get this code working for Read/Visitors to a SharePoint site?From initial observation what I see is that your SPLimitedWebPartManager is not created from an elevated web. Try like below
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSite elevatedSite = new SPSite(SPContext.Current.Site.ID))
using(SPWeb elevatedWeb = elevatedSite.OpenWeb())
using (SPLimitedWebPartManager wpManager = elevatedWeb.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
{ //Rest of your code
Geetanjali Arora | My blogs | -
Hello,
We recently changed to TFS as our bug tracking system and trying to understand how to change the existing states of Bug\Add new states. We installed TFS 2013 Update 4 and followed below process to change state values. For example, I would like to change
Bug State value of "Done" to "Closed",
1. witadmin exportwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /n:Bug /f:C:\TFS\bug.xml
2. Replace all values of "Done" to Closed
3. witadmin importwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /f:C:\TFS\bug.xml
Then we see below error in Work -> Backlog
TF400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.
Learn about how to correct your configuration
Details about the validation error appear below:
The following element contains an error: RequirementBacklog/States. TF401098: This element defines the states for work items that appear on your backlog. The state configuration is incorrect. Each work item on this backlog must have one state with the type
'Complete'. The following work item type does not have any state with the type 'Complete': Bug.
The following element contains an error: BugWorkItems/BugWorkItems. TF400506: This element defines the states for work items that represent Bugs or Defects. Each state must exist in at least one of the work item types that are defined in: BugWorkItems.
The following states do not exist in any of the work item types: Done.
Tried export, made changes to ProcessConfig file for Bug states and imported. Still same issue.
Please suggest on how to proceed with customization of Bug states\values in TFS 2013 Update 4
Thanks,
AswiniHi Aswini,
Thanks for your reply.
I tested in on my Scrum 2013.4 team project, and found we need edit two places in processconfiguration.xml file, please try below:
<BugWorkItems category="Microsoft.BugCategory" pluralName="Bugs" singularName="Bug">
<States>
<State type="Proposed" value="New" />
<State type="Proposed" value="Approved" />
<State type="InProgress" value="Committed" />
<State type="Complete" value="Closed" />
</States>
</BugWorkItems>
<RequirementBacklog category="Microsoft.RequirementCategory" parent="Microsoft.FeatureCategory" pluralName="Backlog items" singularName="Backlog item">
<AddPanel>
<Fields>
<Field refname="System.Title" />
</Fields>
</AddPanel>
<Columns>
<Column width="100" refname="System.WorkItemType" />
<Column width="400" refname="System.Title" />
<Column width="100" refname="System.State" />
<Column width="50" refname="Microsoft.VSTS.Scheduling.Effort" />
<Column width="200" refname="System.IterationPath" />
<Column width="200" refname="System.Tags" />
</Columns>
<States>
<State type="Proposed" value="New" />
<State type="Proposed" value="Approved" />
<State type="InProgress" value="Committed" />
<State type="Complete" value="Closed" />
<State type="Complete" value="Done" />
</States>
</RequirementBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"Use system proxy settings" Not working on Mac OS X Snow Leopard
When I change the network location or when I select "Use system proxy settings" on the connetion configuration dialog.
Firefox is not using the proxy defined on the loction set on Mac OS X Snow Leopard.
I usualy change from work to home, at work I've a proxy and at home I don't, and it's a bit annoying to have to change the proxy twice a day. So I tryed this feature, but It's not working for me.
I've tryed also with Firefox 3.6 (I think) and didn't work either.I run it from eclipse, and on debug mode i checked the value of
java.library.path, and it was ok.
Any way, how can i do what you suggested on mac?It's just a command line argument, but there's no reason to add it if your
java.library.path is ok. One of its componenents must be a directory where
your shared lib is stored, that's all. BTW, the Mac is unix based isn't it?
Shouldn't it be an .so file then? (just a wild guess)
kind regards,
Jos -
Wake on Demand: Not working for some services, others OK
I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?
-
DNS not working for some computers
We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
BradThough what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim
Maybe you are looking for
-
Reader Extended PDF not working for some users
I've created a document in Adobe X Pro and saved it as a Reader Extended PDF with Enabled Commenting & Markup. Most users are having no problem adding comments (by attaching a file) but I have a few users having issues (one with Adobe Reader 9 for Ma
-
Itunes Store error message: "your payment method was declined.."
Hello! I'm from Ukraine, today, tried to buy the app (It worked before) but itunes error message: "your payment method was declined ..". The card is fine, tried different. What's the problem? how to fix?
-
Windows error 126 on home computer
when I click onto itunes on my windows home computer and error message pops up MSVCR80.dll windows error 126 tells me to re install itunes however after 10 attemps yesterday that wouldn't work either. How do I fix this?
-
In itunes under genre the word "acostic" should be acoustic... correct? Can I correct this?
In itunes, under genre, the word "acostic" should be acoustic... correct? Can I correct this?
-
I seem to be having Java plug-in problems with both Mac OS 10.6 and Mac OS 10.7 systems on our network this morning, in both cases Java applications are unable to run either from Safari or Firefox. In 10.7 I get a message about the plugin being block