System.Data.OleDb.OleDbException: Overflow
[OleDbException (0x80040e57): Overflow]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextErrorHandling(OleDbHResult hr) +44
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +233
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +190
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +58
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +163
System.Data.OleDb.OleDbCommand.ExecuteNonQuery() +103
Accountgegevens.verzendenButton_Click(Object sender, EventArgs e) in c:\Users\Admin\Documents\My Web Sites\De webwinkel\Accountgegevens.aspx.cs:55
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +109
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +103
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +31
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3460
Hello,
The Overflow exception may occurs with type conversion problems in your query. For example, insert a string into an integer column.
Please try to run the query in debug mode and see whether there are the incorrect data types.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support
Similar Messages
-
System.Data.OleDb.OleDbException reading big number
I have in my oracleserver (8.1.7) a table with a column declared as number. Writing into this column a big floating number like 1E30 and
reading this row with a OleDbDataAdapter or OleDbDataReader ends in the following exception:
System.Data.OleDb.OleDbException: Accessor is not a parameter accessor
Strange:
- Writing 1e30 to a number column (via OleDbDataAdapter) works fine (checked with SQL*).
- Writing 1e-30 to a number column works fine too, but reading it returns 0.
I use OraOleDB 9.2.0.4.0. Those Problems occures under framework 1.0 and 1.1.
Anybody knows a solution? Do I have to live with DB double data between 1e-27 and 1e27?
Thanks,
MichaelHello Pablo,
And how does your connection string "strXLS" looks like?
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Hello Friends
I am facing problem while saving the data into the ms access 2007.
Below picture shows my database and table
Below picture shows my error log.
Here is my GettingCategoryId() method code.
private OleDbCommand GettingCategoryId()
OleDbCommand cmd2 = new OleDbCommand("select * from tbl_category where category_name='" + combobox_category_name.Text + "' ", GlobalVarClass.globalCon);
OleDbDataReader dr = cmd.ExecuteReader();
while (dr.Read())
textBox1.Text = Convert.ToString(dr.GetInt32(0));
return cmd2;
Here is my conv_photo() method code.
void conv_photo()
//converting photo to binary data
if (pictureBox1.Image != null)
ms = new MemoryStream();
pictureBox1.Image.Save(ms, ImageFormat.Jpeg);
byte[] photo_aray = new byte[ms.Length];
ms.Position = 0;
ms.Read(photo_aray, 0, photo_aray.Length);
cmd.Parameters.AddWithValue("@item_image", photo_aray);
Here is my connection string.
public static string gloabal_connection_string = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source= " + Application.StartupPath + "\\pos_fircos.accdb";
public static OleDbConnection globalCon = new OleDbConnection(gloabal_connection_string);
This is my saving code.
OleDbCommand cmd = GettingCategoryId();
cmd = new OleDbCommand("INSERT INTO tbl_items(category_id,item_no,item_model,item_description,item_sale_price,item_image)Values('" + Convert.ToInt32(textBox1.Text) + "','" + Convert.ToString(textbox_item_no.Text) + "','" + Convert.ToString(textbox_item_model.Text) + "','" + Convert.ToString(textbox_item_description.Text) + "','" + Convert.ToDouble(textbox_item_sale_price.Text) + "',@item_image)", GlobalVarClass.globalCon);
conv_photo();
cmd.ExecuteNonQuery();
Please give me solution this problem.
Waiting for your reply.
Thanks and regards
Your truly,
Hasnain Ahmad
[email protected]I strongly recommend that you change your command from using string formatting to build up the command to a simple command that uses parameters. This will: a) clean up your code so it is understandable, b) prevent SQL injection attacks which your current
code is fully vulnerable to, c) help more easily identify which parameter you aren't actually setting.
//Not validated against the compiler so there may be syntax errors
var cmd = new OleDbCommand("INSERT INTO tbl_items(category_id,item_no,item_model,item_description,item_sale_price,item_image) Values (@categoryId, @itemNo, @itemModel, @itemDescription, @itemPrice, @itemImage)", GlobalVarClass.globalCon);
cmd.Parameters.AddWithValue("@categoryId", Convert.ToInt32(textBox1.Text));
cmd.Parameters.AddWithValue("@itemNo", textbox_item_no.Text);
cmd.Parameters.AddWithValue("@itemModel", textbox_item_model.Text);
cmd.Parameters.AddWithValue("@itemDescription", textbox_item_description.Text);
cmd.Parameters.AddWithValue("@itemPrice", Convert.ToDouble(textbox_item_sale_price.Text));
//This is the parameter that doesn't seem to have any value so replace ?? with the variable holding the value of the image
cmd.Parameters.AddWithValue("@itemImage", ??);
conv_photo();
cmd.ExecuteNonQuery();
Michael Taylor
http://blogs.msmvps.com/p3net -
HI
when i copy asp.net 3.5 application from IIS7 to IIS 8 in windows server 2012 and browse the application and try to save data in oracle , i get following error in Event viewer
Log Name: Application
Source: ASP.NET 4.0.30319.0
Date: 4/6/2015 2:53:21 PM
Event ID: 1309
Task Category: Web Event
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 17/06/36 02:53:21 ?
Event time (UTC): 17/06/36 11:53:21 ?
Event ID: 34f214e1dcdf45f5ad8450739c954494
Event sequence: 24
Event occurrence: 1
Event detail code: 0
Application information:
Process information:
Process ID: 18724
Process name: w3wp.exe
Account name: TEST\splaw
Exception information:
Exception type: InvalidOperationException
Exception message: The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine.
at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
Request URL: http://-----:50/executionreq/printLawsuit.aspx
Request path: /executionreq/printLawsuit.aspx
User host address: ---3.184
User:
Is authenticated: False
Authentication Type:
Thread account name: TEST\Spfarm
Thread information:
Thread ID: 16
Thread account name: TEST\Spfarm
Is impersonating: False
Stack trace: at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ASP.NET 4.0.30319.0" />
<EventID Qualifiers="32768">1309</EventID>
<Level>3</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-06T11:53:21.000000000Z" />
<EventRecordID>174735</EventRecordID>
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data>3005</Data>
<Data>An unhandled exception has occurred.</Data>
<Data>17/06/36 02:53:21 ?</Data>
<Data>17/06/36 11:53:21 ?</Data>
<Data>34f214e1dcdf45f5ad8450739c954494</Data>
<Data>24</Data>
<Data>1</Data>
<Data>0</Data>
<Data>/LM/W3SVC/3/ROOT/ExecutionReq-1-130727947211114471</Data>
<Data>Full</Data>
<Data>/ExecutionReq</Data>
<Data>C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\</Data>
<Data>TSHAREPINT2013</Data>
<Data>
</Data>
<Data>18724</Data>
<Data>w3wp.exe</Data>
<Data>TEST\splaw</Data>
<Data>InvalidOperationException</Data>
<Data>The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine.
at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
</Data>
<Data>http://----:50/executionreq/printLawsuit.aspx</Data>
<Data>/executionreq/printLawsuit.aspx</Data>
<Data>10.169.3.184</Data>
<Data>
</Data>
<Data>False</Data>
<Data>
</Data>
<Data>TEST\Spfarm</Data>
<Data>16</Data>
<Data>TEST\Spfarm</Data>
<Data>False</Data>
<Data> at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection,
</Data>
</EventData>
</Event>
adilHi,
As this question is more relate to iis, I suggest you post it to IIS Forum, you will get more help and confirmed answers from there.
http://forums.iis.net/
Best regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
System.Data - Crash during DataTable.Load
Hello
I encountered a (random) crash of my executable during a DataTable.Load when i do a "select" request with a big CLOB (> 24000 characters).
I have coded a test and the error happen after 5 or 6 execution. I find a way to correct the problem by adding a Thread.Sleep after the DataTable.Load.
But it's clearly not a solution
DataTable myTable = new DataTable();
myTable.Load(myReader);
=> This code crash
DataTable myTable = new DataTable();
myTable.Load(myReader);
Thread.Sleep(1000);
=> this code work
I have the same problem with a myReader.GetValue() and a myReader.GetString()
If someone could provide an explanation...
Thanks
My configuration :
Oracle driver : OraOleDb v11.1.0.6
My assembly if compiled on Framework 4.0 x86
Here is the detail of the exception :
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
at System.Data.Common.UnsafeNativeMethods+IRowset.GetData(IntPtr, IntPtr, IntPtr)
at System.Data.OleDb.OleDbDataReader.GetRowDataFromHandle()
at System.Data.OleDb.OleDbDataReader.GetValueBinding(System.Data.OleDb.MetaData)
at System.Data.OleDb.OleDbDataReader.GetValues(System.Object[])
at System.Data.ProviderBase.DataReaderContainer+CommonLanguageSubsetDataReader.GetValues(System.Object[])
at System.Data.ProviderBase.SchemaMapping.LoadDataRow()
at System.Data.Common.DataAdapter.FillLoadDataRow(System.Data.ProviderBase.SchemaMapping)
at System.Data.Common.DataAdapter.FillFromReader(System.Data.DataSet, System.Data.DataTable, System.String, System.Data.ProviderBase.DataReaderContainer, Int32, Int32, System.Data.DataColumn, System.Object)
at System.Data.Common.DataAdapter.Fill(System.Data.DataTable[], System.Data.IDataReader, Int32, Int32)
at System.Data.Common.LoadAdapter.FillFromReader(System.Data.DataTable[], System.Data.IDataReader, Int32, Int32)
at System.Data.DataTable.Load(System.Data.IDataReader, System.Data.LoadOption, System.Data.FillErrorEventHandler)
at eWorkflow.Dal.Dal.DalBase.ExecuteReader(System.String)Hi,
Sorry so late to answer your question.
Per my understanding, you have load a large of data,and don't have enough memory.
But form the exception Info: System.AccessViolationException
It seems as joel said, maybe some others attempt to read/write the same data. Please exclude these
factors and try again. Good Luck!Best wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Dear all,
Can any one explain about this error,
2014-11-02 19:19:29.58 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-11-02 19:19:29.58 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-11-02 19:19:29.58 Deleting log backup file. File: '\\Jdccb-mis\logshipping\JDCCBPROD_20141030134512.trn', Last Write Time (UTC): '10/30/2014 1:45:13 PM'
2014-11-02 19:19:29.60 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) *****
This errors comes on My Secondary server during log shipping and database goes to restore mode.
satish KumarHi Krishnp,
These are the latest jobs in queue:
89 Quadro de Horários 28/6/2014 1:45 N/D Arquivar Configurações do Sistema Aguardando Processamento 0%
88 Quadro de Horários 28/6/2014 1:30 N/D Arquivar Modos de Exibição do Project Web App Aguardando Processamento 0%
87 Quadro de Horários 28/6/2014 1:00 N/D Arquivar Campos Personalizados Aguardando Processamento 0%
When I delete the last work automatically related are excluded.
Currently the queue is 406 jobs.
David Soares MCTS:MBS - MCTS - MCITP -
I was trying to create a Crystal Reports XI report to return security permissions of files and folders. I have been able to successfully connect and return data using the File System Data driver as the Data Source; however the String limit on the ACL NT Security Field is 255 characters. The full string of data to be returned can be much longer than the 255 limit and I cannot find how to manipulate that parameter.
I am currently on Crystals XI and Crystal XI R2 and have applied the latest service packs but still see the issue. My Crystal Reports Database DLL for File System data ( crdb_FileSystem.dll ) is at Product Version 11.5.10.1263.
Is it possible to change string limits when using the File System Data driver as the Data Source? If so, how can that be accomplished. If not, is there another method to retrieve information with the Windows File System Data being the Data Source? Meaning, could I reach my end game objective of reporting on the Windows ACL's with Crystal through another method?Hello,
This is a known issue. Early versions you could not create folder structures longer than 255 characters. With the updates to the various OS's this is now possible but CR did not allocate the same space required.
It's been tracked as an enhancement - ADAPT01174519 but set for a future release.
There are likely other ways of getting the info and then putting it into an Excel file format and using that as the data source.
I did a Google search and found this option: http://www.tomshardware.com/forum/16772-45-display-explorer-folders-tree-structure-export-excel
There are tools out there to do this kind of thing....
Thank you
Don
Note the reference to msls.exe appears to be a trojan: http://www.greatis.com/appdata/d/m/msls.exe.htm so don't install it.
Edited by: Don Williams on Mar 19, 2010 8:45 AM -
Formula variable with replacement path on system date
Hi Experts,
I got a requirement to calculate "Days without payment" in report level.
Days without payment = System Date - Payment Date.
(Payment date field is available in CUBE, but system date field is not available in the CUBE)
As we know, the difference b/w 2 dates is not possible directly.It can be possible by creating 2 formula variables with replacement paths on the dates and by writing aformula on these 2 formula variables.
But the thing is I dont have system date readily available, and I tried by using SAP Exit. But we cant create formula variable replacement path on another variable (SAP EXIT).
Do we have any SAP variable for formula with replacement path readily avaliable to get system date (or) any other suggession.
Please suggest me.
Thanks,
Sai Chand.SHi Arminder,
Thanks for your valuable answer.
I tried doing the same previously.As u said we can get system date by creating customer exit variable.
But the thing is to find difference b/w 2 dates, we cant do it directly, we need to create 2 formula variables with replacement path.
1) Var1 = Formula variable with replacement path on system date(custoer exit variable).
2) Var2 = Formula variable with replacement path on paymanet date.
Number of days = var1 - var2.
But as in 1st point, we cant create formula variable with replacement path on another variable, as system date is already a variable of type customer exit.
We can create replacement paths only on characteristics.
Please suggest me .
Thanks,
Sai Chand.S -
Printing System Date on Report Title
How can I print the system date on the title of report generated by SQL*Plus?
I remember it is possible to include SQL.PNO in the statement TTITLE to print the page number. Is there any variable like SQL.PNO which represent system date?
Previously I've include SYSDATE to the SELECT statement of the report. It is the column named TODAY, with option NOPRINT and NEW_VALUE TT_TODAY, where TT_TODAY is include in TTITLE statement. The problem is: if the SELECT statement returns nothing, TT_TODAY will be blank/Null.
How can I work around with this problem?Dear all,
My colleague told me the way to print System Date on title of SQL*Plus report as followed:
COLUMN today NEW_VALUE tt_today NOPRINT FORMAT A1 TRUNC
TTITLE CENTER tt_today RIGHT SQL.PNO
SET FEEDBACK OFF
SET TERMOUT OFF
SELECT SYSDATE AS today FROM DUAL;
SPOOL RPTFILE
SELECT ....... << to generate report output >> .......
SPOOL OFF
SET TERMOUT ON
SET FEEDBACK ON
It works! The output file contains System Date on each page title.
I don't understand why Oracle didn't implement variable similar to SQL.PNO to represent the System Date. If Oracle is able to create SQL.PNO which can increment on each page break, why not the System Date which remains the same on each page? -
How to execute Script in Test Plan with two different System Data Container
Dear members,
I have a requirement.
I need to execute one Test Config in a Test Plan with one System Data Container and another Test Config in a Test plan with another SDC.
How to achieve this ?
Kind regards,
Pradeep
Edited by: Pradeep Singh Rawat on Mar 23, 2011 7:10 AM>
Pradeep Singh Rawat wrote:
> I need to execute one Test Config in a Test Plan with one System Data Container and another Test Config in a Test plan with another SDC. How to achieve this ?
Currently it is not possible, to maintain more than one SDC on a test plan.
A workaround is, to maintain one SDC on a test plan and specify no target system direct in a test plan. If you maintain then your two systems in one SDC, you can specifiy each target system in the test configuration, where it is needed.
Here the example:
test plan:
systemdata container: SDC_ALL
target system: <empty>
test config 1:
systemdata container:
target system: CRM
test config 2:
systemdata container:
target system: ERP
systemdata container: SDC_ALL
target system: CRM -> rfc 1
target system: ERP -> rfc 2
Kind regards,
Christoph -
Visual Composer 7.0: system (data source) does not appear
Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks... -
Is it possible to update the data in entity via System.Data.Entity.DbSet entity
If i want to insert a record in dynamically created entity, i can do something like,
System.Data.Entity.DbSet entity = Request.Context.Set(obj.GetType());
Object Updated = entity.Add(obj);
but if i want to update the record in same entity how can i do that? Please help i am new to EF.Hello Sidra,
>>but if i want to update the record in same entity how can i do that? Please help i am new to EF.
If you use the object type, you need to modify its properties by using reflection because at compile time, the type is not known to compiler:
https://msdn.microsoft.com/en-us/library/axt1ctd9(v=vs.110).aspx
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi All
Sorry if this is not the correct forum, I am trying to apply for an SSL Certificate service.sap.com/tcs
and when I pull up the systems our Solution manager is not listed it say's "If an SAP Web AS is missing from the list, the system data in your company is not up-to-date"
I performed the following
When your system has been added in SMSY do the following:
Go to tx SMSY.
Choose your system - application server abap
Tab "Header Data"
Choose "Read System Data Remote"
Next select your <SID>
Tab "System Data in SAP Support Portal"
Choose Synchronize.
After hte synchronization finishes your data should be maintained.
and it still did not show up? Any ideas.
Thanks MikeJust check again.
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If the iPad screen still will not rotate - turn it over and gently tap it on the back a couple of times - but gently tap it. Make sure that the screen is protected. -
How can i recover my database after losing system data file.
hi everyone,
how can i recover my database in the following scenario.
1. offline complete backup taken 2 days ago. database was in archive mode.
2. today i lost my system data file, and also lost my all archived files.
3. i started up the database but, the following error was generated.
SQL> startup
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF'
4. i copied the system data file from backup and wrote the following statement, to recover the database.
SQL> recover datafile 1;
ORA-00279: change 2234434 generated at 07/15/2009 10:52:10 needed for thread 1
ORA-00289: suggestion : C:\B\ARC00051.001
ORA-00280: change 2234434 for thread 1 is in sequence #51
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
now i don't have any archive file. is there any chance to recover the database ?
R e g a r d s,
Asif Iqbal
Software Engineer,
Lucky Tex, Karachi,
Pakistan.now i don't have any archive file. is there any chance to recover the database ?If no archive log files are available you can't recover the datafile.You need to have all the archives from the time of offline backup was taken till the system datafile is lost.
Anand -
System data while creating support message
Hi,
I would like to know if there is any way to remove the system data from the support message long text (Transaction Data - Overview). In my case we don't need this information in the support message.
Thanks in advance.
Best regards,
Sérgio VieiraHello,
I'm talking about the message in the Overview tab, under Transaction Data.
Thanks in advance.
Best regards,
SV
Maybe you are looking for
-
Standard menu bar and title bar
Hi to all I am developing a module pool program in which I have defined set pf status in PBO event. But while running the program that standard tool bar not working. Plz guide me.... Thanks & Regards Anubhav
-
Steps and methods to extract general ledger and special ledger
Hi all: could you please tell me the method and steps about how to extract general ledger and special ledger? Thank you very much!!!
-
Hi All, This is a question on landed costs for imported materials. I have created a PO for an item having a value of INR 650, [ex.rate u2013 48/-] qty u201310. I have created landed costs after a/p invoice. I gave freight amt as 20 usd, customs valu
-
How do I find the _lpoperator name
I am using a MacBook Pro and a Canon MP470 printer. Lately, when I try to print documents, I get a drop-down which tells me to enter a name and passward to resume the cue. Where do I find the correct user name and password to use? None that I have ev
-
Hi All, Could you please let me know "pull" the xml file from URL through SOAP adaptor. I have used only Sender SAOP adaptor. Here I need to use pull data and send it to R3 system. I am bit confuse how I can trigger the receiver SOAP adaptor and sen