Remote system monitoring entry- data not relayed to Central system

Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
Prashant

Hi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

Similar Messages

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

Error : Entry 4 not in table EMSEG (system error) in MIGO

Hi All,
I am getting the below error while cancelling the material document in MIGO.
Error : Entry 4 not in table EMSEG (system error)
Please provide any information on the same issue.
Thanks & Regards,
Ashish Dholi

you can only know it after you have read, justified and implemented the notes.
That is your work, it cannot be made by anyone here.
In general, if OSS notes are supposed to fix program errors, then it will usually not harm to implement them, you will get it anyway with the next hotpackage.
if your issue is caused by a program error, then there is no workaround to applying a OSS note to get your issue fixed.

KE27 msg k/846 system checks entry date

Dear all,
We are testing KE27 to transfer actual COGS for period 2011/7.
One of the billing document was failed to find actual COGS.
The message says "k/846 unable to determine actuall cost for period 008".
The billing document was created today Aug 1.
To me it looks like system checks entry date than posting date in my case.
Did anyone have the same problem before?
Please let me know how to solve it.
Thanks~
Best regards,
Sharon Chen
PS. MM period was shifted to Aug. before movement 601 was done.

Hi Sharon,
on the entry screen of KE27 there is a check-box labelled "periodic valuation". The F1-description for that box reads:
"If you select this function, valuation is executed using the original posting date for the line item being revaluated, as opposed to using the date when the transaction was executed"
Obviously, you ran KE27 with that box un-checked.
Regards
Nikolas

Could not access the central system - CUA problem

Hi all,
Please help me with this problem.
Its just a test scenario, when everything will be good here, i have to do the same for Production.
We just did upgrade our R3 system from 4.6 to ECC6.0.
I created CUA on DB1100 ( Dev BW 4.6 ) with two child systems 1) DC1150 ( Dev CRM 4.6)
2) DE1400 ( DEV ECC 6.0 ).
Now everything is working fine between DB1100 and DC1150..
It works like CUA ( DB1100) and child (DC1150) systems as it should be.
But connection between DB1100 and DE1400 is not working fine. When you go to SU01 in DE1400, it does not allow me to change anything. It means connection is there and DB1100 is taking DE1400 as child system but when i am updating any user information or roles in DB1100 it is not updating child system DE1400.
And when i went to tcode SCUA in DE1400 it gave me this error.
"Could not access the central system DB1100".
I dont know whats happening. I did same config in DE1400 as i did in DC1150. DC1150 is working fine but not DE1400.
The most weird thing is that DB1100 is thinking DE1400 as child system and i can not make any changes to DE1400 directly.
please help me with this. What i can do to make this working between DB1100 and DE1400??
i need to do the same in production if it gets passed.
Thanks in Advance.

Hi mala_swa,
seems that you have a problem with the rfc-connections....
Please check in both directions. The connection have to work without problems.
Check SCUL in DB1100 - what is the status of the distributed users? Errors, unconfirmed?
Check idocs in DE1400. Are there some? What is their status?
The most common error is coming from not working rfc-connections. That brings for instance problems while generationg partner profiles, etc. Also the strict naming convention (log. system name=system name in CUA landscape = name of used RFC-connections) has to be considered....
So that are some points, that you could check.
good luck,
Bernhard

Data not loading in Development system( Urgent)

Dear SDNs,
Am loading data in development system... The message in status tab is Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I tried to reload the data but am getting the same kind of error message...
I checked out whether the source system connection is OK or not... While am checking the source system connection I got an error message like as follows
<b>BW unknown in source system
The BW IDoc type ZSIA035 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found</b>
Wat kind of action does we follow in this situation...
Kindly Advice me...
Answering getz appreciated...
Warm Regards,
<i>Aluri</i>

Hi Aluri,
I do faced the same problem before....
Is RFC connections and Partner Profiles are done properly between BW system and R/3 systems.........
If it has done properly....... Try to Activate the R/3 source system at BW side...
Still if you are getting the same error..
Right click on R/3 Source system at BW -> select Resore....
It will ask you RFCUSER passward for BW adn R/3
After doing it also still if you get the errors ...
Try to configure the all these steps....
Step 1: Create a Logical System at BW and R/3 side using t-code SALE
Step 2: Create the RFC Connection between BW to R/3 and R/3 to BW using the SM59 and Do the Test Connection and Remote login
Step 3: Create the Port Number for IDOC processing at R/3 and BW sides using WE21
Step4 : Create the Partner Profiles at R/3 and BW sides using the WE20
Specify the Inbound and Outbound parameters at R/3 and BW
For to know message types follow the link.....
http://wiki.ittoolbox.com/index.php/HOWTO:Re-Connect_R/3_and_BW
Check this Link also...
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/content.htm
After doing all these things now come to BW
Create R/3 Source System at AWB....
Hope it Helps...
Regards,
Kiran Telkar
* Assign points if it helps your requirement * *

Remote JConsole Monitoring in Weblogic Not Working

HI,
Attempting to monitoring weblogic data source parameters via jconsole.
The weblogic server is SSL enabled.
1. When i connect to the server via jconsole using local process I am able to view the com.bea beans
2. Connecting to server remotely via jconsole, connection is successfully established however I am not able to view com.bea beans
WE had tried various options, specifically connecting to SSL enabled weblogic server based on discussions in https://community.oracle.com/thread/884708?start=0&tstart=0 and http://docs.oracle.com/javase/7/docs/technotes/guides/management/agent.html
However we get the same problem, ie. we are able to connect to weblogic via jconsole but not able to view jconsole. Please find attached
Please note We do not have permissions to set IIOP communications in weblogic.
Details below:
Weblogic Server : weblogic 10.3.5
Jdk - jdk 6
Server SSL enabled with custom identity
Any help would be appreciated

Hi,
Please follow the documentation
http://visualvm.java.net/jmx_connections.html
See chapter 'Making an Explicit JMX Connection'
Making an Explicit JMX Connection
Before you can make an explicit JMX connection from VisualVM to a running
application, this application must be started with the correct system
properties. The system properties in question are the following:
   com.sun.management.jmxremote.port
        to specify the port number through which the application will be exposed
   com.sun.management.jmxremote.ssl
        to specify whether secure sockets layer (SSL) encryption will be activated
        to secure the connection to the application
   com.sun.management.jmxremote.authenticate
        to specify whether the connection will be password protected
So, something like follows will be needed for the WLS server:
-Dcom.sun.management.jmxremote
-Dcom.sun.management.jmxremote.port=8082
-Dcom.sun.management.jmxremote.ssl=false
-Dcom.sun.management.jmxremote.authenticate=false
Here is more documentation on this:
http://docs.oracle.com/javase/7/docs/technotes/guides/management/agent.html
Monitoring and Management Using JMX Technology
Thanks,
Sharmela

Entry date not proper in adhoc query

Hi,
Entry date field in action infotype ( in the adhoc query) always returns 00.00.0000. Whereas the standard reports brings the entry date properly (This is from prelq.hiredate). How we can bring the values into this particular field.The feature 'ENTRY' returns DATYP but data is not maintained in IT41. System should bring the hiring action date (0000 start date) as the entry date. We want to use this entry date field in the adhoc query.
Thanks in advance.
Sreeja

Hi Sreeja
Please read the following paragraph of the consulting note 508026 :
"Exception:
If the query is started with a key date selection, the query calls
function module HR_LEAVING_DATE with the key date and not with the start
and end date of the personnel action in which the key date exists. You
can use modification note 562031 to change this system response."
Please also make sure, that the corrections of note 561514 are contained in your system.
I hope that this information be useful for you.
Regards,
Jun

DSWP - system monitoring/Administration - tasks not showing up

Hi all,
In our production system definition , in DSWP --> System Monitoring/Administration for our Production systems, for one prod system, the "Display Open Tasks" - the icon is not showing up. It has disappered???? We have daily tasks defined.
Any ideas????
Thanks, Neeta

HI,
The production satelleite system underwent a unicode & platform conversion and yesterday solution manager diagnostics for the production satellite system was set up - using solman_setup. Any of these changes could have caused this issue, but how?
As far as SMSY data, ADS is flagged as "relevant" in our D and Q system and the "open display tasks" icon is there and active.
WE looked at note 1478251 and we are at SAPKITL435.
I am not the task creator but am helping someone who is....
Anything else we can check?
Thanks, Neeta

Disable remote control IR receiver is not showing up in system pref.

My remote for my iMac is not working. I originally thought it neeeded a new battery but that was not it. I had a power outage the other night and since then have been noticing the problem.
The apple support says;
'To turn on IR reception:
Open System Preferences and click Security.
Deselect "Disable remote control infrared receiver.'
When I go to system preferences and then security, the option to 'disable remote control infrared receiver' does not show up.
Yesterday I restarted and the option came back, this morning after turning my computer on it wasn't there again. Any idea how to resolve this problem for good?
Thank you
Dan

The next time you notice the line gone from the System Preferences, open up your System Profiler (from the /Applications/Utillities/ folder) and check to see if the "IR Receiver" is listed under the USB section in Hardware.
If it doesn't appear there, then perhaps you're having some kind of failure of your receiver? If it does appear there, then it would seem more likely that you're having some kind of preference file or setting problem.
-Doug

Service entry without an entry date/not linked to goods receipt/invoice?

Dear Gurus,
I created a service entry against line 10 of PO. When viewing the service entryu2019s u201CAccept. Datau201D tab, there is a document date and a posting date.
When viewing the u201CHistory tab,u201D the created dated is 01/12/11...
When viewing the POu2019s u201CPurchase Order Historyu201D tab, the Service Entry does not have an entry date Additionally, when I go to the u201CGR/IR Assgtu201D view, the service entry is at the very top of the view But the goods receipt and invoice processing document are at the bottom, grouped together, but without the service entry.
Please help as why is it happeing like this?

Dear Gurus,
I m creating service PO and later on doing service entry sheet w.r.t the PO...in service entry sheet, i m entring entry date, posting date and all other relevant informations...and saving the SES and later on releasing it...
after this, I am going to PO history tab, there i m seeing the SES number but entry date field is missing...
May i know the reason?
Pls help...

No records for 2LIS_04_P_COMP, posting date & entry date not in same month

Hi All,
I m unable to get records in rsa3 for my DS 2LIS_04_P_COMP if my entry date and posting date of production order is not same or not in same month.
Please suggest.
Niraj

Hi,
It depends up on your Delta relevant field either it is Changed on or Time Stamp. What is ur delta field?
Regards,
Suman

System Monitoring Graphics- Page not opening..

We are trying to setup the System monitoring setup between Solman and ECC, All the config part done using simulator software.
Now when I click DSWP - operations - System Monitoring receive an error message page cannot be displayed..
But when I open the link from windows server its working fine.
Couls somone reply how to fix it ?.
Thanks
Thirumal

Hi Nelis,
I cleared the Cache and temporary internet files, and rebooted the sap and windows server too.
still shows the same error like page cannot be displayed.
MY SAP Solman system Installation number is SAP-INTERN and ECC installation number is "Initial" with licensed one till december 2008.
1.in this is it a problem with installation number ?..
2. Is their Any one configured the System monitoring with installaton number INITIAL or SAP-INTERN ?
Thanks
Thirumal.

CUA - Users not created in Central System

Hi - Just put in CUA into a Solution Manager 4.0 client - and have the following issue.
After performing SCUG - the users are brought into the central system BUT not created into the central system.
For example:
Child system is CLNT100
Parent system is CLNT200
In CUA - if I search on the user - I can see it exists in CLNT100, but no entry is created in CLNT200.
This is an issue as I can't use SU10 in CUA - to do mass changes as the users don't exist in this client.
I am pretty experienced with CUA - but have not seen this before - is there some new settitng that I need to make to create the users in the CUA client when performing SCUG?
Thanks

Hi - you only need to perform SCUG in the central system.
I have brought all the users accross from each child system.
I think I may have incorrectly analysed the error.
What I am trying to do is use SU10 in the Central system to make changes on users in the child systems. Issue is that none of the users that are in the child system only show up in SU10.
I therefore think that this is an issue with SU10 in CUA parent - as it is only picking up uses if they exist in this CUA parent client (i.e. not if they only exist in the child systems)
Is there any way to change the behaviour of SU10?

CUA Roles residing in Child system are not showing in Central System

I just hooked up CUA today and have linked 8 child systems to the central system. The 8 child system users and roles have already been established in the child systems. Do I need to run program susr_zbv_get_receiver_profiles in each of the child systems to get the roles in the child systems to show up in the Central System for each user? I tried this in one child system and it worked.
Or is there something else I need to do without going into each child system?
I tried this program susr_zbv_get_receiver_profiles in the Central system but it did not work.

are you looking for roles or profiles? profiles will not show up in the central system. If you run SCUL do you see anything? when you first added the child system did you use an SAP user that had the proper permissions? In both the child and the parent? There are two roles that the user must belong to to add the child to the parent they are SAP_BC_USR_CUA_SETUP_CENTRAL and SAP_BC_USR_CUA_CENTRAL.
If you have any question about the permissions of these user at the time you added the child to the parent I'd delete the child and re-add with either the above roles or a user with SAP_ALL in BOTH the child and the parent systems

Remote system monitoring entry- data not relayed to Central system

Similar Messages

Maybe you are looking for