System ID in Business HTML ?

Hello,
I am working in an ECC 6.0 system with integrated ITS.
I have searched everywhere, and cannot find if there is a Business HTML implicit system variable that holds the current system ID. Can someone give that to me ?
It is crazy that such a basic information is so hard to find.
Thanks.
Thomas

alternatively try this
http://help.sap.com/saphelp_nw04/helpdata/EN/5f/1fbc4d4aee11d189740000e8322d00/frameset.htm
~systemName

Similar Messages

How to create a table control in Business HTML??

Hi All,
I dont have much knowledge about Business HTML. Can anyone tell me how to create a table control. The requirement is to accept two fields from user and then on click of a button get these values populated on a table control. Can u pls help me out on this??
Also to create the table, I tried using SAPTemplateTableBegin()functions, but using these functions gives me an error. Is the because the standard SAP template files does not exist or what??

Hi Raja,
My first approach was the same as u said but the issue is when i try to generate a template i.e. (system generated template), the generated template uses standard TemplateLibraryDHTML.html functions like `SAP_TemplateHeader()`
`SAP_BodyContentBegin()`
`SAP_FormBegin()`
The above all is not supported in our client's ITS and so we have to manually create a table control using the step loop functions in DHTML and correspondingly FIELD-SET in ABAP.
We could successfully do this but as i mentioned in my previous message, we still have to make the table entries editable and refresh the internal table when the values in the table are changed.
Pls help!!
Rgds,
Swapna.

Logical System for RFC-Business system?

Hi,
I want use RFC adapter for my scenario like File to RFC.
The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel.
Regards
Gopi

logical system name is relevant only for Idocs, but it is always a good idea to maintain the technical and business systems with all the information you can provide.
you can check the logical system names of ABAP application servers at bd54 tx code.
Regards,
Henrique.

SLD: Adjust / Add logical system name for Business System [XI 3.0]

Hi,
In the System Landscape Directory, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
Kristian

In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan

Made automatic from the system to pick business area ?

Hi
For VAT GL account system is asking business area to entered manually, can this be made automatic from the system to pick business area ?
Thank You
Ramakanth
Edited by: Ramakanth Ambala on Jul 24, 2008 10:07 PM

Hi,
I think there is no possibility of picking business area automatically in FI.
But in CO u maintain the business area within controlling. This means that when you create cost center master records you need to specify the business area. CO objects such as, cost centers and internal orders aid account assignment, as the business area can be derived from the master data records. When you post primary costs to a cost center, the system determines the business area automatically from the cost center master data. This enables the costs to be assigned to the correct business area.
Therefore, you do not need to manually set the business area in the posting document, as the system does this, and thus reduces the number of incorrect assignments to a minimum.

3rd party tech systems for multiple business systems...

I think this might a very stupid question but still would like to post it..:).. In a 3parties involved scenario, can 1 technical system be assigned to multiple business systems , if all business systems refer to the same 3 party..or does each 3rp party business system needs its own technical system..
Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta.
-Teresa

Hi Teresa,
>>>Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta
I believe you can only do an incremental export/import
sld does not allow importing/exporting one product...
Remember to do a backup of your QA SLD
(from the SLD - administration)
then if you make a mistake nothing will happen
about the second question:
"Business systems, which name the logical receiver independently of technical properties. For example, a business system might be a client of an SAP system.
Technical systems with which the hardware of the system is specified in more detail (server data, and so on)."
this should be possible not only for SAP systems
Regards,
michal
Message was edited by: Michal Krawczyk

Older Business HTML and Dynamic Page Table question

I am not sure if anyone will know here (or if this is the best place to post), but I have a question concerning using the Business HTML template library controls/API for use with ITS. I am attempting to use the "Dynamic Page Table" control, and have hit some problems. Does anyone have any example code they can share on getting this to work correctly (ie, paging through records, selecting from rows, etc)? I have "torn apart" the underlying Javascript and even modified my code to adjust for some formatting issues that the API's do not handle, however, my "pages" all display at once in the beginning and only hide when I use one of the paging icons (forward,back,all back, etc). THe "isVisible" parameter seems to do nothing for the "page" DIVs. Currently running the latest version of ITS and R/3 4.6b on the backend if that helps. Also, the example from the SAP Design Guild cookbook is very basic and does not "page" as I need. Thanks in advance!
CSolomon

Check the following Tables
FND_FORM_CUSTOM_RULES
FND_FORM_CUSTOM_SCOPES
FND_FORM_CUSTOM_ACTIONS
FND_FORM_CUSTOM_PARAMS

PCo 2.0 does not recover after "System is too busy" error.

We run PCo 2.0.1.8 with multiple agents (OPC-DA 2.05a --> MII 12.1.6.Build(91)).
Sometimes our MII-Server is under heavy load and is not able to process PCo messages anymore. Therefore one PCo agent stops working and logs this message:
"System is too busy. Incomming message processing is halted until the system becomes less busy."
The other agents stop working as well. They never recover and start sending messages again.
It is not about retrying to a send old message again. We set "Maximum Retry Attempts" to 3 and "Retry Interval" to 1.
It is about sending new messages after OPC items changed. Our OPC servers change values at least once a minute, which should result in new messages.
Any suggestions to solve this issue?
Regards,
Martin

Kevin,
of course we try to avoid this error and investigate the reason, but it may happen and we would like PCo to recover from it.
PCo and its push technology is the right choice for us. We have to get informed when an OPC value changed. We do expression evaluation as well, but a few machines change their values so often that we get notifications every 3 to 5 seconds. And this is the reason for the very short retry interval of 1 second and 3 retry attempts in this case. If the notification comes too late, the information is outdated and we don't need it anymore.
The retry interval is not the point. When the MII server becomes less busy and is ready to process new notifications again, PCo does not even send new notifications. The agents have to be restarted to work again. That's our problem.
Expected behavior of PCo
00:00   OPC change --> MII idle --> Send Notification --> OK
00:03   OPC change --> MII busy --> retry 3 times, then throw away --> OK
00:06   OPC change --> MII still busy --> retry 3 times, then throw away --> OK
00:09   OPC change --> MII not busy anymore --> Send Notification --> OK
Reality
00:00   OPC change --> MII idle --> Send Notification --> OK
00:03   OPC change --> MII busy --> retry 3 times, then throw away --> OK
00:06   OPC change --> MII still busy --> PCo does nothing --> BAD
00:09   OPC change --> MII not busy anymore --> PCo does nothing --> BAD
Best regards,
Martin

How can I detect in Business HTML that the app was called from portal?

How can I detect in Business HTML that the app was called from portal?
I need to distinguish whether the application was called from portal (URL iView) or by using an URL outside of portal.
So what I'm looking for is a variable or function that can be used like this:
`if (~within_portal==1)`
do this if called from portal
`else;`
do that if not called from portal
`end;`
For example, can I check in the program that there is a SSO2 cookie from the portal?
I'm using Integrated ITS in Basis 700.

Here is the trick:
if (sapwp_active=="1")
in portal
else
without portal
end;

Cross-system locks on business partner CRM/ERP

Hello,
we're working with business partners (BUT000) in both CRM and ERP system. The business partners are exchanged using the CRM middleware (BUPA_MAIN).
Is there any SAP standard way to prevent the business partner from being edited in CRM (web UI) when it's currently locked in ERP (tcode BP) and vice versa?
Thanks & Regards
Wolfgang

Hi Wolfgang,
I think you need to develop some custom code to do this. Create a rfc to perform a enqueue in remote system.
Best regards,
Caíque Escaler

Logical system name in business system (SLD)

Hi,
While creating business system in SLD what should give for the logical system name?
Should the logical system name exists in ABAP stack or the new one?
Thanks.

Hi,
If you are creating the BS for SAP R/3 in SLD means we have to give the LS name which we had in SAP R/3( goto SALE and take the LS from there)
Goto Assign LS-----take the client which you are using for SAP R/3 and take the LS name assigned to that Client
Regards
Seshagiri

Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to choose the dafault source system
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

I need help in logical system name in business system

i created two business system with same logical system name and now am getting error in ID when i try to activate business system"" Logical system LSSUN already exists in service | BS_RCVESUN"" So,i again changed a logical system name in SLD and tried to activate it again but changes is not reflected back in ID.again it show logiacal system alredy exists.
pls giv me a steps to reflect changes back in ID.
thanks & Regards
Manikandan Shanmugam

open BS in edit mode,
choose from menu: Adepter Specific Identifiers
Here you push button: Compare SLD data
Save and activate

No Logical System Entry in Business System

When I will send an IDOC from XI to a target R/3 system, I am getting an error "Unable to convert the sender service to an ALE logical system "
I checked the threads and the problem seems to be, that there is no Logical System recognised by the Business System.
I'll checked the logical System in the Technical System in SLD, and it is there.
I checked SALE, and the entry is in the systems.
But when I go to the Integration Directory and check System-->Adapter Specific Informations, I see an empty entry for "Logical System". The field stays un-editable and when I hit the "Sync with SLD" button, nothing happens.
Any idea, how to either enter the logical system or make it recognise the SLD entry?
Thanks for any hints, points will surely be awarded

Hi,
Have you looked int XI FAQ by Michal?
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Have a look into the weblog
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
which addresses your problem.
Regards,
Jai Shankar

Same Logical System Name, different Business System

Hi all,
I have a problem regarding SLD and Integration Directory. The client is requiring me to use the same logical system name for two different business systems. It seems that this is not possible in XI. When I tried activating the business system in ID, I'm getting the error, 'Logical system XXX already exists in communication component YYY'. Please help. Thanks!
IX

Hi,
You cannot have same logical name for two business systems....
Why you need it?? How will the SAP system understand which which system the message was sent for?? Some workaround like
1. Create a business system with this logical system
2. Overwrite sender/receiver business system in the receiver agreement for messages sent to 2nd business system..
This may lead to discrepancies....
Regards
Suraj

System ID in Business HTML ?

Similar Messages

Maybe you are looking for