System ID in Message Mapping in PI 7.11

Hi Experts
I am working on a file to IDOC scenario where I need to pass the system ID to the data element RCVPRN on the IDOC side, How can I get the system ID when the mapping is being executed
System id should get the dev PI system or QA or PRD wherever it runs ex: DF0CLNT001 for dev
Please let me know if there is any blog
Thanks
PR
Edited by: PR on Oct 18, 2011 11:41 AM

Thanks

Similar Messages

System Error During Message Mapping

I've set up a simple mapping scenario that sends a DEBMAS06 IDoc from our R/3 system to XI mapping to DEBMAS06 and writing out to a file. I am getting the following system error during message mapping:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME</SAP:P1>
I have gone back to the Design Builder and tested out the message mapping and the interface mapping and both work successfully. I have also taken the payload of the message and submitted it via the RWB and it generates the same error as when sent from R/3. Any other places I can look?

Hi Mike,
You have got the connectivity issue problem between ABAP and J2EE stack. When do the test in the Message Mapping, thats the J2EE and it works. But during the runtime it has to go to the Integratin Server, which is the ABAP stack. Fix the connectivity issue, check the smicm,trace and debug log etc.
Hope this helps.
Cheers,
Ranjan

Access current system or target system ID in message mapping

Hi.
I have a requirement to map three different constant values to Sales Org field, depending on whether the system is D, Q or Prod.
This needs to be done in the message mapping section of the Interface along with all the other mapping logic.
Is there any way how we can access the current system ID or the Target system ID (XI is communicating with target, in this case, ECC, using RFC receiver Communication channel)?
Please help.
Thanks.
Anuradha.

Hi,
The key element would be :-
System.getProperty("SAPSYSTEMNAME");
Use this in UDF to get System Name ... and then on basis of systemname do whatever you want to perform.
Regards
Prabhat Sharma

Dynamically change Receiver Business system in message mapping

Dear all,
I would like to change the receiver business system in the message mapping that is used in the interface determination. I do understand there is an enhanced receiver determination where I can use a mapping but that is not what I am looking for.
I think this should be possible if we can change the appropriate value in the SOAP(message) header.
Possible candidates I can think of by looking at the SOAP header in SXMB_MONI are
1. SOAP:Header- SAP:Main- SAP:Receiver- SAP:Service
2. SOAP:Header- SAP:OutboundBinding - SAP:OutboundBindingEntry - SAP:ToServiceName
Q1. Which one of the above is relevant while identifying the receiver agreement ?
Q2. What is the best way to access them from the mapping(preferably from a UDF) ?
Thanks in advance.
Cheers
danus
PS: I have tried to set "http://sap.com/xi/XI/System","ReceiverService" in Dynamic config & ReceiverService, BusinessSystemReceiver and ReceiverSystem in the Containers Transformation Parameters, but didn't get the expected result.

Chidambaram,
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
A typical usage case is if you do not yet know the names of the receivers at configuration time. In this case, you can define a mapping program, for example, which reads a list of receivers from a table or from the payload of the message at runtime.
Go through the following link:
[Receiver Determination enhancement|http://www.****************/Tutorials/XI/RecvDetermination/Enhancement.htm]
Hope your problem gets resolved.
Regards,
Kiran Bobbala
Edited by: kiran Bobbala on May 7, 2008 5:47 PM

Get the target system time in the message mapping

Hi there,
I need to use the system time of target R/3 system in the message mapping. Any ideas how can I handle this?
Thanks,
Igor.

Thanks for your quick replies.
XI and R/3 system is in the same timezone but this is not relevant. I know it might sound strange but there is a reason I need to use time in the message mapping which is 2 minutes later than in the target system:
e.g. target system time: 16:58:32 I need to use 16:56:32 value in the mapping.
I found RFC MSS_GET_SY_DATE_TIME which can proide me with the value, just wondering if there is no other way how to do that other than RFC lookup ...
Thanks,
Igor

System hangs while I save or activate Message mapping

Hi all,
After performing the required message mapping whenever I save the Message Mapping the system hangs, it does respond but after a very long time say some 20+ minutes.
But I don't encounter such problems while saving data types , message types , message interfaces etc..
can any one help me with this?
Thanks in advance.
Ajay

Hi Michal,
I have a freshly installed PI 7.1
Im able to run file to file scenarios without mapping.
Im able to activae DT, MT, SI etc..but i dont receive any response from the system when I save a message mapping.
It takes ages to go to test tab, executes after a long time but target shows no message...
can u kindly help me on this?
has ne one faced sch an error before.. Im using PI 7.1

Accessing XI logical system in message mapping

Hi All,
How can I retrieve the current PI logical system name in my mapping. I need to map it as part of the payload.
Is there a java api that I can use?
Thanks,
Harsh

Hi
Glad to know that it helped you..
we used this in one of our scenarios earlier.. but I dont know if there is any good doc on this.
check if this helps
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/72e26432-0701-0010-19ba-abc05de7360b
Our scenario was something like this.
The customer had only Two systems (one Prod + other for dev/test/QA etc). since we cannot adjust mappings other than Dev, we used the above way & looked up values to generate the exact target location.
I shall update this link for better doc, if I find any. (also for client info)
- just try "SAPSYSTEM" if it works
Cheers
Regards
Vishnu

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

Message Mapping error in UDF

I am receiving errors when trying to activate my MM. I believe the issues are in one of two UDF's. These UDF's do work in another MM without error. Below are the error's and UDF's.
ERRORS:
Activation of the change list canceled Check result for Message Mapping MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE | http://wawa.com/xi/erp/pos: Starting compilation Source code has syntax error: /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map5420e070cabe11dcab4b00306ef38da9/source/com/sap/xi/tf/_MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_.java:3291: cannot resolve symbol symbol : variable container location: class com.sap.xi.tf._MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_ map = container.getTransformationParameters(); ^ /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map5420e070cabe11dcab4b00306ef38da9/source/com/sap/xi/tf/_MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_.java:3293: cannot return a value from method whose result type is void return constant; ^ 2 errors
UDF's:
public String getSender(Container container){
String constant;
java.util.Map map;
// get constant map
map = container.getTransformationParameters();
constant = (String) map.get (StreamTransformationConstants.SENDER_SERVICE);
return constant;
IMPORTS: com.sap.xi.mapping.parse.dom.;javax.xml.parsers.;java.io.;com.sap.aii.mapping.lookup.;org.w3c.dom.*;
public String getSeqNum(String fileType,String objNum,String Sender,Container container){
String request = "<ns0:ZRFC_NUMBER_GET_NEXT xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\"><NR_RANGE_NR>" + fileType + "</NR_RANGE_NR><OBJECT>" + objNum + "</OBJECT><QUANTITY/></ns0:ZRFC_NUMBER_GET_NEXT>";
InputStream isRequest = new ByteArrayInputStream(request.getBytes());
SystemAccessor accessor = null;
String num = null;
try{
 // 1. Determine a channel.
 Channel channel = LookupService.getChannel(Sender, "R_RFC_ERP");
 // 2. Get a system accessor for the channel.
 accessor = LookupService.getSystemAccessor(channel);
 // 3. Create a payload according to the data type which the adapter expects.
 // Use service.getBinaryPayload() for binary payload,
 // and service.getTextPayload() for text payloads.
 Payload payload = LookupService.getXmlPayload(isRequest);
 // 4. Execute lookup.
 Payload response = accessor.call(payload);
 //Parse response
 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
 DocumentBuilder builder = factory.newDocumentBuilder();
 InputStream resStream = response.getContent();
 Document doc = builder.parse(resStream);
 Element sequence = doc.getDocumentElement();
 NodeList number = sequence.getElementsByTagName("NUMBER");
 //Extract Number
 num = DOMUtil.getSimpleElementText((Element) number.item(0));
} catch (Exception e) {
 return e.getMessage();
} finally {
 try {
 if (accessor != null) accessor.close();
 } catch (Exception e) {
 return e.getMessage();
GlobalContainer gc = container.getGlobalContainer();
gc.setParameter("Num", num);
return num;
Any help is appreciated.
Regards,
Darrell

Fauver,
Just to narrow down the problem first remove the first udf and only use the 2nd user defined function. Also in the 2nd udf you have to change this line:
try{
// 1. Determine a channel.
Channel channel = LookupService.getChannel(Sender, "R_RFC_ERP");
In the above line instead of Sender you use the business service or business system where R_RFC_ERP RFC communication channel is created in Integration Directory. So you are hardcoding it first.
Once you have done this changes do save and test it once again. If this works then you can change back to original and your first udf needs to be checked.
Regards,
---Satish

Error when saving message mapping -

Just upgradedto PI 7.1. System details below....
Make Release NW07_08_REL SPS Number 08 JDK Version jdk15
Server Version SAP J2EE Engine 7.10.3710.43701.20090416112158
Java Runtime Java(TM) 2 Runtime Environment, Standard Edition (version=5.1.034)
Java Virtual Machine SAP Java Server VM (version=5.1.034)
Operating System AIX (version=5.3, arch=ppc64)
I've been building an interface to test the developer tools and when I save my message mapping (it's a very simple graphical mapping) I get a java popup with the text 'Internal GUI error', I'm using Java WS Version 1.5.0 (build 1.5.0_19-b02) as per the PI documentation.
I recreated the problem timing each activity and saved the exception in a text file. I'm able to identify the relevant section of the exception biut it's meaningless to me. I searched SDN & OSS and I can't find any specific hits. Those that are similar (different SAP applications - WebDynPro for example) point towards incompatible s/w components - Java Run Time environment etc.... I've cleared the Java WS cache (Edit>Preferences>Delete Files) just to make sure, but the problem still occurs. I'm looking for advice. I've pasted some of the exception details below. I can provide more information but it's a pretty long file.
Edited by: Rob Warde on Aug 5, 2009 4:27 PM

Thrown:
com.sap.aii.utilxi.swing.framework.FrameworkException: Internal problem occurred
 at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.init(ExceptionDialog.java:124)
 at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.<init>(ExceptionDialog.java:96)
 at com.sap.aii.utilxi.swing.toolkit.IBMessages$1.run(IBMessages.java:319)
 at com.sap.aii.utilxi.misc.thread.ThreadPool.assureAWTEventQueueing(ThreadPool.java:84)
 at com.sap.aii.utilxi.misc.thread.ThreadPool.assureAWTEventQueueing(ThreadPool.java:67)
 at com.sap.aii.utilxi.swing.toolkit.IBMessages.showException(IBMessages.java:309)
 at com.sap.aii.utilxi.swing.toolkit.IBMessages.showException(IBMessages.java:299)
 at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor$1.run(Guitilities.java:395)
 at java.awt.event.InvocationEvent.dispatch(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:319)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NoSuchMethodError: com.sap.aii.ib.bom.mt.js.JavaSource.setMode(I)V
 at com.sap.aii.mappingtool.Project.getJavaFile(Project.java:324)
 at com.sap.aii.mappingtool.mf.MappingTool.getJavaFile(MappingTool.java:107)
 at com.sap.aii.mappingtool.fwutil.api.ViewUtil.prepareSave(ViewUtil.java:118)
 at com.sap.aii.ibrep.gui.mapping.xitrafo.XiMappingView.prepareSave(XiMappingView.java:269)
 at com.sap.aii.ib.gui.editor.DefaultPersistenceHandler.save(DefaultPersistenceHandler.java:153)
 at com.sap.aii.ib.gui.editor.XiDocument.save(XiDocument.java:335)
 at com.sap.aii.utilxi.swing.framework.cmd.SaveCommand.execute(SaveCommand.java:76)
 at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:198)
 at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:154)
 at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:82)
 at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
 at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
 at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
 at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
 at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
 at java.awt.Component.processMouseEvent(Unknown Source)
 at javax.swing.JComponent.processMouseEvent(Unknown Source)
 at java.awt.Component.processEvent(Unknown Source)
 at java.awt.Container.processEvent(Unknown Source)
 at java.awt.Component.dispatchEventImpl(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Window.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)

Problem while activating message mapping

Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.

Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine

CHECK_EXCEPTION in message mapping ??

Hi XI friends..
i am getting error like this ..while activating message mapping..
nternal error while checking object Message Mapping MM_MES_WorkOrderCompletion_To_BAPI
details...log..
#6 17:37:30 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.server.oa.rb_all.CHECK_EXCEPTION
com.sap.aii.ib.core.clmgmt.ChangeListMgmtException: Internal error while checking object Message Mapping MM_MES_WorkOrderCompletion_To_BAPI | http://aaaa.com/xi/SAP_ERP/PPE/ERP_MES (AL_PPE_ERP_MES , 1.0 of aaaa); see details
 at com.sap.aii.ib.core.clmgmt.ChangeListMgmtException.createFromException(ChangeListMgmtException.java:35)
 at com.sap.aii.ib.server.clmgmt.ChangeListMgmtImpl.submitChangeList(ChangeListMgmtImpl.java:227)
 at com.sap.aii.ib.server.clmgmt.ChangeListMgmt.submitChangeList(ChangeListMgmt.java:132)
 at com.sap.aii.ib.server.clmgmt.ChangeListMgmt.submitChangeList(ChangeListMgmt.java:124)
 at com.sap.aii.ib.sbeans.clmgmt.ChangeListMgmtBean.submitChangeList(ChangeListMgmtBean.java:92)
 at com.sap.aii.ib.sbeans.clmgmt.ChangeListMgmtRemoteObjectImpl10.submitChangeList(ChangeListMgmtRemoteObjectImpl10.java:435)
 at com.sap.aii.ib.sbeans.clmgmt.ChangeListMgmtRemoteObjectImpl10p4_Skel.dispatch(ChangeListMgmtRemoteObjectImpl10p4_Skel.java:343)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java)
 at java.security.AccessController.doPrivileged1(Native Method)
 at java.security.AccessController.doPrivileged(AccessController.java)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java)

please guide me..
regards
ram

Hi friends..
i am getting error like this when i am trying to do static test...
There is not enough space in the file system.
details...log..
#23 19:33:37 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.server.cmpl.CompilerException
com.sap.aii.ib.core.mapping.exec.ExecuteException: There is not enough space in the file system.
 at com.sap.aii.ib.server.mapping.exec.ServiceUtil.compileSourceCode(ServiceUtil.java:207)
 at com.sap.aii.ib.server.mapping.exec.ServiceUtil.compile(ServiceUtil.java:156)
 at com.sap.aii.ibrep.

plz..guide me..
ram

File-name not being fetched in a multi-message mapping by Dynamic Conf

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S

Problem in message Mapping SAP PI 7.1

Hi Experts,
I have a problem in my Message Mapping,
Design: [Design|http://www.life-4-music.de/prob.jpg]
Messagemapping: [MappingTest|http://www.life-4-music.de/probII.jpg]
The Problem is, that ElementC from SourceMessage occours "0 to n" times in Element A, but I need to check every ElementC in ElementA to TargetElementA with a IF Statement.
I tried a lot of things, like change the CONTEXT of the ELEMENT or use SPLIT BY VALUE but without success.
Rgds,
Steffen

Hello, thanks a lot for the fast awnser. I tried this allready to change the Context of the Elements "system" in this Mapping: Changed Context
For Example in one field I check for Entry "ERP" in Source Field "system" , if "ERP" is in the first ELEMENT then it will be mapped correctly: Example ERP works
But If "ERP" is in an element below, then it doesn´t work, so it seems to be, that he only map the first occurrence of the Elements. : Example SCADA don´t work
Here is the View of the QUEUE from the don´t working Example: Show QUEUE of not working Example
maybe u have a tip for me again , because I´m allready desperate
Thanks a lot.
Rgds,
Steffen

How to validate a date in message mapping

Hi experts,
how to validate a date in message mapping. For ex: if date comes as 2008/02/31, then file it shold not get processed.how to achieve this in message mapping. Please help .
Thanks&Regards,
Reyaz Hussain

Hi,
There are few simple ways for date validation as follow,
1.If you would like to handle it in XI only, then in message mapping you could verify about it with the help of generating smart exception.
For e.g in mapping there is one Date conversion API i.e. somthing DateTransformation It converts the incoming date format to required format. Here give the date format i.e expected from Sender File.
If in case the format miss-matched then it will create the exception.
You could handle this exception with the use of [Alert notification|http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm] and could be even able to notify to sender system about it.
2. The another solution is easy for SAP synchornous communication --If you are passing the file data to SAP, then you could use below function modules to verify date format in receiver RFC/BAPI or inbound IDOC program. If the sy-subrc is not 0 then don't process further.
CONVERT_DATE_FORMAT
ISU_DATE_FORMAT_CHECK
Thanks
Swarup

System ID in Message Mapping in PI 7.11

Similar Messages

Maybe you are looking for