"System is not a child system in central user maintenance network" problem

Hi ppl,
I have added one new role for a user id. After that, I log on using that user id. However the message "System is not a child system in central user maintenance network" appeared. What has happened and how to solve the problem? Thank you.

This error message occurs when a user tries to logon to the CUA master system <u>and</u> when his account is <u>not</u> assigned to this logical system (see SU01: tab "systems", displayed only in the CUA master system).
You need to define the CUA master system also as CUA client system and assign that system to the user master record; otherwise the user cannot logon to the CUA master system.
Regards, Wolfgang

Similar Messages

SAP System is not the original system of the object being edited

Hi All,
We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
How we can resolve this situation.

Hello Guys,
Thks for your input.
@Vinod,
We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its a replica of old dev to nev dev with SID change.
@Arjun,
I already check TADIR table and and its pointing to new SID.
@Ashok,
As i said earlier,post intallation is already completed.
Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
Thx,Nilesh

"the current system is not the original system" in uccheck

Hi Friends,
I get a message during the unicode conversion. Can u help me how to rectify this error.And also would be grateful if u can given some links regarding this issue and why this error message is raised.
"the current system is not the original system" in uccheck transaction of unicode conversion.
thank you
chandra

Do you still need help on this?
Please refer to SAP notes that can provide some hints
#997198 UCCHECK: The current system is not the original System
#963311 UCCHECK reports errors on XSLT sources
cheers,
Vincent

Obligatory transport target for business system SAPR3D not found in System

HI All ,
We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
When I checked with business system transport target was not defined ., Please suggest how to go ahead further .
Thanks ,
Prakash

Hi Ravi,
Please go through below disucssion it is on the same line of your question.
Transport target for business system not found in System Landscape Director

IDOCs sent from sender R/3 system do not reach XI system

Hello everyone,
We have a IDOC to JDBC scenario in place.
Sender R/3 system is R1A. XI system is XDA.
IDOCs are successfully sent out of R1A:
On R1A.(R/3)
1. WE05 shows data passed to Port OK
2. SM58 does not show the IDOC to be stuck in TRFC queue
On XDA (XI)
1. Port has been mentioned in IDX1
2. IDOC Adapter monitoring (IDX5) does not show any message from R1A.
3. SXMB_MONI does not show any message from R1A.
The above scenario is for acceptance box.
On Dev boxes (RDD and XDD)the same scenario works OK.
Could we be missing something in the ALE configuration?
If there was something wrong in the Integration Scenario, then atleast the IDOCs should have reached XDA right?
Please assist.
Ashwin Bhat

The option to Transfer IDOCS Immediately was not working. All IDOCs were later sent Batchwise successfully.
The Basis team is investigating why IDOCs are not transferred immediately.
Thanks for all your help Guys.
Regards,
Ashwin

Source System of Dev System is not active QAS System.

Hi
I am trying to transport my SAP-BI flow from Dev System to the Quality System.
but I am getting an error "Source System of Dev system is not active in QualIty System.
I have checked RFC Connection ,everything is fine.Please help.
Thanks and Regards,
Asim

Have you checked the mapping of the source systems in the conversion table (RSLOGSYSMAP)?
Usually, DEV source systems are not available in QA, so when you transport to DEV, the source system assignment has to be changed to a QA source system.
For example, source system CRDCLNT100 (CRM DEV system) is connected to BWDCLNT100 (BW Dev)
and CRTCLNT100 is connect to BWTCLNT100.
Objects in BWD which are assigned to CRD, have to be re-assigned to the CRT source system when transporting them from BWD to BWT.
The mapping table is maintained in RSA1, menu option tools > 'mapping of the source system names'.
Jan.

Downloaded firefox to new windows 7 computer and system would not restart, windows repair deleted firefox to fix the problem

When in started my new windows 7 computer I loaded office and a couple of other programs that I wanted. I then tried to download firefox. When I restarted the computer the system startup failed and all the windows options to repair or open in safe mode failed. I reloaded windows 7 and didn't load any other software then tried to download firefox and the restart failed. However, windows repair did a fix and I was able to restart but noticed that windows had deleted firefox. What is going on and how do I get firefox to load without causing problems?

What likely happened is Windows did a System Restore, which removed Firefox and everything that had been installed after.
Try starting up Windows, install Firefox. Then Restart, then install everything else one at a time. If Windows fails to start up after one install, you know that's the problem.

Regd : How to find Validity date for a user in central user system

Hi Experts;
I want to get the list of users with profile SAP_ALL with following details like validity ,user type ,user name ,user id..
I can get through SUIM for each individual systems.Its very difficult to login to each system ,generate the report.So I prefered to go for Central system
But if I use central user system I have no option to find validity and user type for the system ( SUIM - > Cross system application )
I have also tried to the table USRO2 ( which gives only the list of users in the central system )
So is there any possible ways to find the Users with profile SAP _ALL with validity date in the central user system. So that I can easily generate it as one report instead of logging to each and every system
Regards
Sanjeev.S

Hi Ruchit
Thanks for your reply. I want to find the validity date of all users having SAP_ALL
profile of all child system connected through central user system .So it is possible
to do that in Centrals System by executing the report?
If I execute that report in Central user system will it give the details of all child
system connected to central system
I think it will give only the result of Central system and not the child system connected to Central system.Please clarify me.
I can execute the report by logging to each child system ,but it takes very long hours for me since there are many system in my landscape.
Awaiting for your reply.'
Thanks
Sanjeev.S

CUA Roles residing in Child system are not showing in Central System

I just hooked up CUA today and have linked 8 child systems to the central system. The 8 child system users and roles have already been established in the child systems. Do I need to run program susr_zbv_get_receiver_profiles in each of the child systems to get the roles in the child systems to show up in the Central System for each user? I tried this in one child system and it worked.
Or is there something else I need to do without going into each child system?
I tried this program susr_zbv_get_receiver_profiles in the Central system but it did not work.

are you looking for roles or profiles? profiles will not show up in the central system. If you run SCUL do you see anything? when you first added the child system did you use an SAP user that had the proper permissions? In both the child and the parent? There are two roles that the user must belong to to add the child to the parent they are SAP_BC_USR_CUA_SETUP_CENTRAL and SAP_BC_USR_CUA_CENTRAL.
If you have any question about the permissions of these user at the time you added the child to the parent I'd delete the child and re-add with either the above roles or a user with SAP_ALL in BOTH the child and the parent systems

CUA: Distribute users from central to specified child systems

Hello!
I've a question concerning CUA: I've added two new systems to our CUA. Now I want to destribute the users of the central-system to the new child-systems accompanied by assigning a specifed role for the child-systems. Unfortunately, the user maintanance - mass changes (SU10) does not support assigning the child-systems to users.
Is there any other possibility (perhaps a report) to automatically distribute the users or is it necessary to access each user manually and assign the child-systems and roles.
Any hint would be appreciated!
Thanks in advance!
Greetings
Wolfgang

Sorry, I was convinced that mass changes don't work for systems - but they do! Next time I'm going to check possibilities in more detail!
Greetings
Wolfgang

New role in CUA user record not getting pushed to child system

I added a new child system to our CUA setup. I've confirmed that the RFC connections from both sides are working properly (test connection succeeds) and I've successfully completed the user transfer function in SCUG. All exisitng roles assigned to the users in the child system are now appearing in the CUA central system as expected. I added a new role to a user via SU01 in the central system to this child system, but when I go to the child system, it does not appear in the user's SU01 record. Any ideas why this would not be syncing properly?
Thanks,
Michael

Hi,
Whenever you create a new role in child system, it has to be sync up with the central system.
To sync up with the central system, login to central system goto su01>enter any user name>go to roles tab- click on Text comparision from chiled system. Its navigate to another screen, there you have to mention the child system and click on execute. it syncs up with child sytem. Hope it will help you out to resolve the issue.
If still you are getting the same issue login to the central system.. goto SE38-- enter the program name as "RSCCUSND" and click on execute there mention the user name and the logical system id of the Child system name, select the parameters which you wanted to distribute to child system and execute it.
Best Regards
Mani

CUP:Deletion of account in CUA child system leaves system assignment in CUA

Hello all CUP experts,
I face a problem with CUA connected systems, more precisely in the account deletion process. The account is deleted in the CUA child system, but it leaves the system assignment in the CUA system.
Is there a way to get CUP to delete also the CUA system assignment, which I understand has to happen before the child system account deletion?
Br,
Stefan Ericsson
+358-50-4867527

Hi Naveen,
1. I have synchronized the company address in central system to all the child systems.
2. This particular child system has an additional company address "XYZ" (which is causing the problem). This address is not being copied to the central system from transaction SCUG. It throws an error saying that the address is incorrect (Missing Country Information). So, when I want to edit the address to get this thing fixed, in the child system, it won't let me do that. I can neither edit it nor delete it. I get the error messages as I have posted earlier.
So I have changed the company address of all the users who were using address "XYZ" to a different address so that I can delete the company address "XYZ". But, I am still not able to delete the address.
If you could guide me on how can we edit or delete the company addresses in a child system (other than from Transaction SUCOMP), it would be great.
Thank You for your time on this thread.
Any input I will appreciate.
Jaya

Deletion doent reflect child system

Hi All,
We have deleted a composite role from CUA,but to our suprise single role still exist in child system. How to delete these now?
We have tried to re-distrubute the idoc- unsuccessful
We cant use PRGN_COMPRESS_TIMES as CUA is conneted.
Any help will be appreciated.
Thank you,
Sri

Hi,
What is the status of the Idocs in Central system and Child systems? Are they processed properly? If yes and still you see the Single Roles in the child system then do the following:
1. Check the Composite role first in the child system (and in central also if it is existing there too). If the role is not ok to see then first take of it.
2. Do a text comparison in the Central system for the Respective Child system(s) and save the user once more by getting into change mode. Now check whether the roles are gone or not.
3. if the single roles are still there then assign the composite role once more and save and then remove it again. Check the SCUL status for the user id and process it if not processed already.
4. process the IDocs manually in BD87 if not processed in the central and / or Child system(s).
Let us know how it goes.
regards,
Dipanjan

CUA- Login to Child System

Hi,
I have configured CUA in System ABC as Central System
System XYZ is the child system
The user TEST exist in both Child and Central System. Hence i have done a transfer of User TEST from child to Central System
Please let me know the following
1. After the transfer, the user is also present in Child System , Please let me know whether this is usual
2. As per my understanding, i should use the same Password in CUA System to login to all child systems. Please confirm

Hi,
CUA is only for user administration of all the systems from one system. Yes once you change the password of the child system from a central system it is automatically distributed to the child system.
Please check with the link below for better understanding:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/0ec43b5d091b3de10000000a114084/frameset.htm
Regards,
Pavan

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

"System is not a child system in central user maintenance network" problem

Similar Messages

Maybe you are looking for