System is not calcutiong tax depreciation in the asset master.

Hi SAP Team,
As per configuration, SAP system is not calculating depreciation in the
area 11 tax depreciation in the asset master,however it is not
calcuating tax depreciation at the group asset level.
In our system we linked group asset in the area 11 in the asset master.
Thanks
Chinna

Check screen layout rules for that asset class, the field might have been suppressed.
SPRO --> Fin Acg --> Asset Acg --> Master data --> Screen Lyaout --> Define screen layout for asset master data -- select relevant screen layout rule assigned to asset class.
Click on logical field groups ---> General data --> Field group rules...... select radio button under optional

Similar Messages

Man/Assessed val.ind in the net worth tax tab of the Asset Master.

Hi Friends,
Checkbox Indicator:Manl net worth tax val. field in the Net worth tax tab is optional in the screen layout rules for an Asset class. But the Check box is not appearing before the manual networth value field in the Asset master data. Could you please through some light on this why it is not appearing in the Asset Master even it is optional in the screen layout rules.
Thanks and Regards
Koteswararao Padarti

Hi Bernhard,
First of all thanks for your response. The maintenance level in the screen layout is at Main Asset number. Just for understanding, Even if the maintenance level is at Asset class level only the default values should flow to the master and it should be modifible at Asset Master level.
In My case the maintenance level is at Asset Main number level, but still it is not appearing. Please let me know is there any thing else can effect this field status?
Thanks and Regards
Koteswararao Padarti

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?

Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.

Hi,
Creating package doesn't mean it will install the product,
You will need to install the package now. Please follow the instructions mentioned in the below articles
Creative Cloud Help | Creating or editing packages
Creative Cloud Help | Deploying packages
Please let me know if it doesn't help.
Regards,
Devendra

I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.

I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.
When I mouse over the icons, the rainbow appears as if it was processing something. The problem is eliminated when I restart my computer but it comes back after a while.
I guess I cant make a backup copy and restore the whole disk because the copy would be made with this error.
Can anyone help me? Anyone with the same issue?

Update: I was able to test out the HDMI adapter as well and the same issue occured. I'm stumped. 10.8.1 maybe.

After upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

after upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Tax depreciation for fixed asset in Singapore

Dear all,
One of our client in Singapore want to run tax depreciation in fixed asset module as below .
They want to run depreciation with stright line method pro rata by the year of useful life
and the depreciation will be posted only once a year at the first period of the year that acqusition.
(No matter when they acqusition the asset)
For example : if they do acqusition an asset = 300,000 S$ on any date in year 2009 with useful life 5 years,
the depreciation should be posted as below:
Depreciation per year = 300,000/5 = 60,000
31-Jan-09     Depreciation should be posted = 60,000
31-Jan-10     Depreciation should be posted = 60,000
31-Jan-11     Depreciation should be posted = 60,000
31-Jan-12     Depreciation should be posted = 60,000
31-Jan-13     Depreciation should be posted = 60,000
How shuold I can do the configuration for this requirement ?    Please kindly advise.
Mary_K

Hi Mary,
I'm from Singapore. Here's how you will configure the system.
Create a dep area for Tax depreciation. You should create new Period Control Method (AFAMP) where you will assign 06 period control to acq, add, ret, trn. 06 means start of the fiscal year.
After that, you create a "Dep Key" to assign this period control method. Then in the dep area per asset class, assign this dep key to the tax dep area.
The system will default the start of dep for tax the start of the fiscal year regardless of when it was acquired within the FY.

How to update the New Depreciation Area in Asset Master Data

Hi,
Please guide me
How to update the New Depreciation Area in the Asset Master Data.
Regards
Srinivas

Hi,
a) The procedure is as follows:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
   RAFABNEW :
3.1     Indicator: Leave values initial = not ticked.
           Do not set this indicator if you want the system
           to copy the values from depreciation area 01.
3.2     Indicator: Leave values initial = ticked.
           Set this indicator if you want to open the newly created
           depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
b) Helpful notes:
430618 (Procedure for setting up new depreciation area)
301113 (Restrictions of RAFABNEW)
421549 (RAFABNEW: Error with closed fiscal years)
c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
regards Bernhard

Getting Segment in the Asset Master ( Using SEGMENT Badi and not Prt Ctrs)

Hi,
We need the field Segment to be populated in the Asset Master to get the correct P&L Statements ( The depreciation run, retirements etc to post to the Segments) . We are using the segment Badi: FAGL_DERIVE_SEGMENT to derive Segments and NOT the Profit Centers
However, the field Segment missing in Asset Master (Class). The field segment is missing the Time Dependent view while creating the Asset Master Data. This is so because in the Configuration of Asset Accounting --> Integration with GL --> Additional Account
Assignment Objects is not showing the Segment field.
According to SAP help, I CAN DO THIS as mentioned
http://help.sap.com/erp2005_ehp_05/helpdata/en/94/f13167dbae436a85a4a1d3ad75f274/frameset.htm
But, as mentioned in the SAP help link above, I am not able to find " Activate segment reporting in
Customizing for Asset Accounting under Integration with General
Ledger --> Accounting Segment Reporting --> Activate Segment Reporting"
Also, from another SAP Help link
http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/fb/84a48d665e4fa9a2dc7b60adeb7c7d/frameset.htm
I found that activation of Business Function FIN_GL_REORG_1
or FIN_REP_SIMPL_3 could also get us the Segment Field in the Asset
Master Data's Time Dependent Field
However, when I goto Transaction SFW5 - Change Business Function Statuswe are not able to find these Business Functions (FIN_GL_REORG_1
or FIN_REP_SIMPL_3 )
Regards
KS

Hi, Activate segment reporting is available only in EHP5.
If you'renot using EHP5, then you can't to update segment as well as profit center in asset master data.
The only way is to put co objects in asset master data, and derive PC,segment based on this co objects

Have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. pl

have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. How can I get the Creative Cloud Market Library?

kglad,
Thanks for the suggestion but I have attempted this many times to no avail. As I said in my original post, "I have researched this problem on this forum and the Adobe site and believe that I have tried everything over the past week."
It is very late here (I am in Greece). I will have a further attempt in the morning. The windows machine is hut down. Thanks for your help.
Bob

Warning massage while saving the asset master record

Hi all,
I have a problem while saving the asset master record.My client manages the group asset in the depreciation area 15 for tax reporting.What I have done in the configuration that, I have created a separate asset class for group asset and marked this asset for entirely consisting of group assets.Then I have createdall the grpup assets in this marked class.For example, supppose I have created one group asset class 50000 and I have created all the group assets in this class.Then I assign the gr.asset no. in the master record of the normal assets and while saving the master record I am getting the warning massage as the account determination is different than the asset.It may't be possible to reconcile them from the FI-AA.But if I am creating the group assets in the class of the normal assets such type of error massage doesn't appear.Also while retiring the normal assets the asseet is not being deactivated automatically and instead a warning massage is coming the asset is still having value in the depreciation area 15 and can't be deactivated.Can any body suggest where I have gone wrong in the configuration?
Debabrata Das

Update delays sometimes mean that there is a queue waiting at the UPD task. Go to SM51 and check to make sure that there are no other tasks waiting to be processed. Check with you Basis group - they might be able to run some diagnostics on the update task.

Screen Layout Field in the Asset Master Record

What is the use of the screen in the asset master record, ANLA-FELEI?
We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
It seems the one defined within the asset class takes precedence.

HI
Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area. With this one can have different screen layouts per dep. area.
Hope i'm clear to you.
Thanks,
Vijay

Cost center change in the Asset master record

Hi
When ever cost center changed in the Asset master record, can it possible what ever the dep that is posted to previous cost center,that will automatically transfers to the new cost center,is there any programme for this,i can use repost functionality in controlling,some time many copst centers changes will happen in
our system,so can any tell me how to automate this.
Thanks
Lily

Hi,
Automatic transfer to new cost center is not possible.
You need to use Distribution or assessment to re allocate the expenses to new cost center.
Regards,
Murali
If it is useful, award points

Displaying Evaluation groups field in the asset master data

Dears,
The Evaluation group fields in the allocation tab in the asset master data was not displayed in the layout, is there is any harm of displaying it in the production system after 3 years from Go-live.
i think it should not make any harm, i just want to confirm.
Regards,
Ahmed Samir

Salam Ahmed
There is no harm.. These fields are used for reportng. They dont impact the process in any way
Br, Ajay M

Who created the asset master ?

Hi experts,
On which report we can know that the asset master with the which user created it ?
regards,
Sanju M S

Hi,
From Table level you will get asset master with user id.
Table ANLA Field ERNAM
Regards
Viswa

System is not calcutiong tax depreciation in the asset master.

Similar Messages

Maybe you are looking for