System.load fails in Vista
Hi All!
I am using JNI to call a DLL for my Java Application. It works fine in windows-XP, but doesn't work in Vista.
I am using following code:
System.load(absolute_path_to_DLL);
I was astonished to see that it works fine from eclipse workspace(on Vista) when i debug the code, but does not work from installed location.
I have set classpath to all the needed jars and dlls and set PATH variable also and use following code in batch file to execute the main class:
JAVAW com.pack1.pack2.mainClass
Please help me to sort out the problem. Thanks.
Regards,
Zia
"Does not work" tells us nothing.
Either it threw an exception on the load or it didn't. If it did then then print the stack trace and post.
If it didn't throw an exception then there is another problem.
Presumably you are using java 1.6.
Similar Messages
-
Jni library loaded by System.load fails on later call to System.loadLibrary
I'm attempting to use jnotify to listen for directory modifications. This requires using jni to dynamically link to a c library. I have gotten everything to work successfully if I put the library on the java.library.path. However, I would prefer to let my application specify the full path to the jnotify library. My understanding is that I should be able to do a System.load("/foo/libjnotify.so") in a static block and then subsequent calls to System.loadLibrary("jnotify") should do nothing as the library is already loaded. However I am getting a 'Exception in thread "main" java.lang.UnsatisfiedLinkError: no jnotify in java.library.path'. Am I misunderstanding the correct usage of these System calls?
Joe wrote:
That makes sense.
The System.loadLibrary portion is in a 3rd party library which I am legally not allowed to change.
Are there any other possible ways to accomplish the loading without the library being on the java.library.path?
You have two problems - not one.
The library itself is calling loadLibrary(). The standard idiom is that one does that in a static block. If a static block throws an exception, any exception, then the class will not load.
Presumably the library is not checking for a duplicate library load. So your problem is that that loadLibrary() call must not throw an exception.
Thus you cannot preload the library.
Far as I can see you have the following options.
- Put it on the path.
- Create a jave exec handler (via Runtime.exec or jni), put the library on that path before you start another VM which does the real work.
- Modify the java API loadLibrary() call so it catches the dup exception, that of course requires a boot option. -
System load fails after configuring splashy
Hey archers!
I was attempting to make my boot screen a little more exciting today but i seem to have gotten myself into a jam. I followed the Splashy wiki (http://wiki.archlinux.org/index.php/Splashy) where it told me to add "splashy" to the hooks array in /etc/mkinitcpio.conf and when I issued the mkinitcpio -p command i got a few errors about files that didnt exist when it was parsing the splashy hook (in hindsight i should have paid more attention!) but the program reported that it had successfully built the boot images so i assumed it wouldnt be a problem.
Anyways so I rebooted and now i get about 70 rc.sysinit error messages about files not existing and my system just sorta hangs after that. I have a spare Ubuntu disk around that i can use to access and edit my Arch files but i cant rebuild the boot image (to my knowledge) without issuing mkinitcpio -p (not possible in a live cd, i tried). Does anybody have any ideas on how I can undo this? Id rather not have to reinstall if possibleThanks for the reply loafer, I can now add chroot to my growing list of commands i understand . Unfortunately its not working:
ubuntu@ubuntu: /media/disk-1$ sudo chroot /media/disk-1 mkinitcpio -p kernel26
==> Building image "default"
==> Running command /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g
/boot/kernel26.img
:: Begin build
/sbin/mkinitcpio: line 253: /dev/null: Permission denied
FATAL: Hook 'base' can not be found
==> FAIL
I dont want to be a help vampire or anything but Im really out of my league here... Can anybody help me out or give me a link? -
Some system rules failed to load.
Hello Every one
i have a problem with my Monitoring ,the alert which i receive continuously in My SCOM 2012 motoring console is..
The System Center Management Health Service 123-31234 running on host xxx-xxxx.Root.net and serving management group with id {0407FB6F-896A-7389-EA01-D60C72ABBD5A} is not healthy. Some system rules failed to load.
I restarted the Service System center Management Service,also delete the folder health service State folder to clear the cache,but still the problem is there.
and i am getting this message in the Event logs of faulty system
Faulting application name: MonitoringHost.exe, version: 7.0.8560.0, time stamp: 0x4f210669
Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2bcac
Exception code: 0x40000015
Fault offset: 0x00000000000761c9
Faulting process id: 0xc2c
Faulting application start time: 0x01cfb546b794c320
Faulting application path: C:\Program Files\System Center Operations Manager\Agent\MonitoringHost.exe
Faulting module path: C:\Windows\SYSTEM32\MSVCR100.dll
Report Id: 00042e99-213a-11e4-93f9-f4ce46830654
Faulting package full name:
and the event id is 1000
Thank You!Have you upgraded your SCOM 2012?, please note, manually installed agents will NOT be updated automatically, you need to run the agent roll-up/upgrade by manually logging onto the servers
plz run the below PS to check the updates on your agents
Import-Module operationsmanager
$agents = get-scomagent
$value = $agents[0].HostedHealthService.GetMonitoringProperties() | ? {$_.Name -eq “PatchList”}
$agents | select version, Name, PrimaryManagementServerName, ManuallyInstalled, @{Label=”PatchList”; Expression={$_.hostedhealthservice.getmonitoringpropertyvalue($value)}} | sort primarymanagementservername, manuallyinstalled, version | ft -autosize
Faizan -
DNG conversion 6.6 works on my XP system, but fails to see files on my Vista OS.
DNG conversion 6.6 works on my XP system, but fails to see files on my Vista OS. Same goes for older versions of DNG. I use the same setup of security on both systems.
Can anyone help?Run an Apple Hardware test. That may provide a clue:
http://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
If you have all of your data backed up or an external clone HDD, I would try erasing the internal HDD, reinstalling the OSX and then upgrading the software to 10.6.8.
Ciao. -
We have this 48 port switch in our engineering department, and it basically stopped passing network traffic.
When connecting to the Console port and power cycling the switch, this is what I see:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
(!)Loader Binary checksum error
<ERR> Runtime Loading Fail - System Halt.
This error obviously doesn't look "normal".
When pressing CTRL-U, I get the following screen:
File Name S/Up Type Size Create Time
$logfile_1 0 3 64 1193046:28:15
Factory_Default_Config.cfg 0 5 354 24:01:02
SRW224G4P_SRW248G4P_boot.bix 1 1 1377600 00:01:03
certificate 0 8 18040 24:00:56
startup-config 1 5 5651 25:00:38
startup1.cfg 0 5 5537 24:01:14
Free Space : 5636096
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
I've tried to update the "SRW224G4P_SRW248G4P_image_v1310.bix" file using Xmodem download, but since I really wasn't sure how to use this boot loader tool, I haven't been successful at doing that, nor do I even know if that's the solution for the problem that I'm having.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 7289
Bytes Received = 394480
Errors:
Checksum = 0
Complement = 0
Duplicates = 0
Image downloaded to buffer.
[R]untime
[D]iagnostic
M[u]ltipe Image
[L]oader (Warning: Are you sure what you are doing?)
[Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1310.bix
Updating file system.
File system update fail.
I'm guessing that I'll need to contact Cisco tech support, although at least through their web site, they make that nearly impossible to accomplish.
Does anyone have any suggestions on what may have happened to our switch and what I should do to recover? Of course we're about to start a time-critical round of product testing, and without this switch, I'm dead in the water. And it's not like we have a spare 48-port PoE switch lying around.Hello,
I got the same issue. After downloading and uploading the firmware, I got the following result and all LED on the switch are glowing. Could you please help on this issue? Where can I find the right firmware. I also have Image loader 1.0.1.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 6b59
Bytes Received = 35ac80
Errors:
Checksum = 0
Complement = 0
Duplicates = 0
Image downloaded to buffer.
[R]untime
[D]iagnostic
M[u]ltipe Image
[L]oader (Warning: Are you sure what you are doing?)
[Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1020.bix
Updating file system.
File system update fail.
File Name S/Up Type Size Create Time
All I got now after restarting the switch is:
File Name S/Up Type Size Create Time
Factory_Default_Config.cfg 1 5 354 24:01:02
certificate 0 8 18040 24:00:56
Free Space : 7602176
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
Thnx in advance. -
SRW224G4P - " ERR Runtime Loading Fail - System Halt"
Hello everyone!
When I power up my switch (SRW224G4P), hyperterminal displays the following output:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
* the screen then clears and displays *
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
<ERR> Runtime Loading Fail - System Halt.
* no "auto-boot in 2 second" message is displayed *
Does anyone have any ideas what can be done to fix this error?
Message Edited by Vince_02 on 12-14-2009 10:52 AMThe SRW is now part of Cisco Small Business. You better ask your question in the Cisco Small Business Support Community. You'll find Cisco people over there...
-
Windows 8.1 SOFTWARE registry hive load failed on Windows Server 2012
Hello,
I am participated in custom Windwows Software backup/restore project development that requires load of Windows SOFTWARE/SYSTEM registry hives from target OS system drive connected to Windows system.
On all Windows version except Windows 8.1 program works correctly but when host system (on that programm run on) is Windows Server 2012 or Windows 8 and target system is Windows 8.1 registry hive load failed with following error:
Failed to load f:\Windows\System32\config\software: [1009] The configuration registry database is corrupt.
After run of 'chkdsk /r' error still remained. All requred security privileges (SE_BACKUP, SE_RESTORE) are applied. All systems are 64-bit.
Generally even system registry editor (regedit) could not open SOFTWARE hive from Windows 8.1 with following error:
Cannot Load f:\Windows\System32\config\software: Error while loading hive.
But when host system is Windows 7 or Windwos Server 2008 then SOFTWARE hive loaded without any problem.
So is there some Windows 8/8.1 registry hives validation mechanism or additional security checks tha prevents load of registry hives fromother OS instance?Sorry for later response. I was busy with other tasks.
The procMon tool shows RegLoadKey is failed when it tried to load the hive on Windows 8.1 (8.1 based WinPE also). On Windows 7, I didn't see the error (Shows Success instead of REGISTRY CORRUPT). Once the hive is load & unloaded on Windows 7 OS, the
check sum of the hive is changed, and I can load the updated hive with regedit in Windows 8.1 OS.
"reg.exe","752","RegCloseKey","HKLM\SOFTWARE\Microsoft\SQMClient\Windows","SUCCESS",""
"reg.exe","752","RegQueryKey","HKLM","SUCCESS","Query: HandleTags, HandleTags: 0x0"
"reg.exe","752","RegOpenKey","HKLM\Software\Microsoft\Rpc","SUCCESS","Desired Access: Query Value"
"reg.exe","752","RegQueryValue","HKLM\SOFTWARE\Microsoft\Rpc\IdleTimerWindow","NAME NOT FOUND","Length: 144"
"reg.exe","752","RegCloseKey","HKLM\SOFTWARE\Microsoft\Rpc","SUCCESS",""
"reg.exe","752","QueryNameInformationFile","C:\Dhoni","SUCCESS","Name: \Dhoni"
"reg.exe","752","RegQueryKeySecurity","HKLM","SUCCESS",""
"reg.exe","752","RegLoadKey","HKLM\target1","REGISTRY CORRUPT","Hive Path: C:\Dhoni\SYSTEM1" -
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
Initial load failing between identical tables. DEFGEN skewed and fixable?
Initial load failing between identical tables. DEFGEN skewed and fixable?
Error seen:
2013-01-28 15:23:46 WARNING OGG-00869 [SQL error 0 (0x0)][HP][ODBC/MX Driver] DATETIME FIELD OVERFLOW. Incorrect Format or Data. Row: 1 Column: 11.
Then compared the discard record against a select * on the key column.
Mapping problem with insert record (target format)...
**** Comparing Discard contents to Select * display
ABCHID = 3431100001357760616974974003012 = 3431100001357760616974974003012
*!!! ABCHSTEPCD = 909129785 <> 9 ???*
ABCHCREATEDDATE = 2013-01-09 13:43:36 = 2013-01-09 13:43:36
ABCHMODIFIEDDATE = 2013-01-09 13:43:36 =2013-01-09 13:43:36
ABCHNRTPUSHED = 0 = 0
ABCHPRISMRESULTISEVALUATED = 0 = 0
SABCHPSEUDOTERM = 005340 = 005340
ABCHTERMID = TERM05 = TERM05
ABCHTXNSEQNUM = 300911112224 = 300911112224
ABCHTIMERQSTRECVFROMACQR = 1357799914310 = 1357799914310
*!!! ABCTHDATE = 1357-61-24 00:43:34 <> 2013-01-09 13:43:34*
ABCHABCDATETIME = 2013-01-09 13:43:34.310000 = 2013-01-09 13:43:34.310000
ABCHACCOUNTABCBER =123ABC = 123ABC
ABCHMESSAGETYPECODE = 1210 = 1210
ABCHPROCCDETRANTYPE = 00 = 00
ABCHPROCCDEFROMACCT = 00 = 00
ABCHPROCCDETOACCT = 00 = 00
ABCHRESPONSECODE = 00 = 00
…. <snipped>
Defgen comes out same when run against either table.
Also have copied over and tried both outputs from DEFGEN.
+- Defgen version 2.0, Encoding ISO-8859-1
* Definitions created/modified 2013-01-28 15:00
* Field descriptions for each column entry:
* 1 Name
* 2 Data Type
* 3 External Length
* 4 Fetch Offset
* 5 Scale
* 6 Level
* 7 Null
* 8 Bump if Odd
* 9 Internal Length
* 10 Binary Length
* 11 Table Length
* 12 Most Significant DT
* 13 Least Significant DT
* 14 High Precision
* 15 Low Precision
* 16 Elementary Item
* 17 Occurs
* 18 Key Column
* 19 Sub Data Type
Database type: SQLMX
Character set ID: ISO-8859-1
National character set ID: UTF-16
Locale: en_EN_US
Case sensitivity: 14 14 14 14 14 14 14 14 14 14 14 14 11 14 14 14
Definition for table RT.ABC
Record length: 1311
Syskey: 0
Columns: 106
ABCHID 64 34 0 0 0 0 0 34 34 34 0 0 32 32 1 0 1 3
ABCHSTEPCD 132 4 39 0 0 0 0 4 4 4 0 0 0 0 1 0 0 0
ABCHCREATEDDATE 192 19 46 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHMODIFIEDDATE 192 19 68 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHNRTPUSHED 130 2 90 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPRISMRESULTISEVALUATED 130 2 95 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPSEUDOTERM 0 8 100 0 0 0 0 8 8 8 0 0 0 0 1 0 0 0
ABCTERMID 0 16 111 0 0 0 0 16 16 16 0 0 0 0 1 0 0 0
ABCHTXNSEQNUM 0 12 130 0 0 0 0 12 12 12 0 0 0 0 1 0 0 0
ABCHTIMERQSTRECVFROMACQR 64 24 145 0 0 0 0 24 24 24 0 0 22 22 1 0 0 3
ABCTHDATE 192 19 174 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHABCDATETIME 192 26 196 0 0 1 0 26 26 26 0 6 0 0 1 0 0 0
ABCHACCOUNTABCER 0 19 225 0 0 1 0 19 19 19 0 0 0 0 1 0 0 0
ABCHMESSAGETYPECODE 0 4 247 0 0 1 0 4 4 4 0 0 0 0 1 0 0 0
ABCHPROCCDETRANTYPE 0 2 254 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDEFROMACCT 0 2 259 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDETOACCT 0 2 264 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHRESPONSECODE 0 5 269 0 0 1 0 5 5 5 0 0 0 0 1 0 0 0
… <snipped>
The physical table shows a PACKED REC 1078
And table invoke is:
-- Definition of table ABC3.RT.ABC
-- Definition current Mon Jan 28 18:20:02 2013
ABCHID NUMERIC(32, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHSTEPCD INT NO DEFAULT HEADING '' NOT NULL NOT
DROPPABLE
, ABCHCREATEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHMODIFIEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHNRTPUSHED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPRISMRESULTISEVALUATED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPSEUDOTERM CHAR(8) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTERMID CHAR(16) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTXNSEQNUM CHAR(12) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTIMERQSTRECVFROMACQR NUMERIC(22, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCTHDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHABCDATETIME TIMESTAMP(6) DEFAULT NULL HEADING ''
, ABCHACCOUNTNABCBER CHAR(19) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHMESSAGETYPECODE CHAR(4) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETRANTYPE CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDEFROMACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETOACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHRESPONSECODE CHAR(5) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
…. Snipped
I suspect that the fields having subtype 3 just before the garbled columns is a clue, but not sure what to replace with or adjust.
Any and all help mighty appreciated.Worthwhile suggestion, just having difficulty applying.
I will tinker with it more. But still open to more suggestions.
=-=-=-=-
Oracle GoldenGate Delivery for SQL/MX
Version 11.2.1.0.1 14305084
NonStop H06 on Jul 11 2012 14:11:30
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-01-31 15:19:35
Operating System Version:
NONSTOP_KERNEL
Version 12, Release J06
Node: abc3
Machine: NSE-AB
Process id: 67895711
Description:
** Running with the following parameters **
2013-01-31 15:19:40 INFO OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US_POSIX, LC_ALL:.
Comment
Comment
REPLICAT lodrepx
ASSUMETARGETDEFS
Source Context :
SourceModule : [er.init]
SourceID : [home/ecloud/sqlmx_mlr14305084/src/app/er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2418]
2013-01-31 15:19:40 ERROR OGG-00184 ASSUMETARGETDEFS is not supported for SQL/MX ODBC replicat.
2013-01-31 15:19:45 ERROR OGG-01668 PROCESS ABENDING. -
[Solved] Full system upgrade fails because of Nvidia dependencies
Problem:
# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-dkms: requires nvidia-utils=346.35
Things I have tried:
$ makepkg -s
==> Making package: nvidia-dkms 346.47-1 (Sun Mar 1 11:42:11 PST 2015)
==> Checking runtime dependencies...
==> Installing missing dependencies...
[sudo] password for digger:
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-dkms: requires nvidia-utils=346.35
==> ERROR: 'pacman' failed to install missing dependencies.
# pacman -R nvidia-utils
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-dkms: requires nvidia-utils=346.35
:: nvidia-libgl: requires nvidia-utils
Some info:
$ uname -a
Linux <hostname> 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
# dkms status
nvidia, 346.35, 3.18.5-1-ARCH, x86_64: installed
nvidia, 346.35, 3.18.6-1-ARCH, x86_64: installed
$ lspci -k | grep -A 2 -i "VGA"
03:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 640] (rev a1)
Subsystem: eVga.com. Corp. Device 2643
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
Subsystem: eVga.com. Corp. Device 2643
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
# pacman -Ss nvidia | grep installed
extra/libvdpau 0.9-1 [installed]
extra/nvidia-libgl 346.47-2 [installed: 346.35-2]
extra/nvidia-utils 346.47-2 [installed: 346.35-2]
# cat /etc/mkinitcpio.conf | grep ^HOOKS
HOOKS="base udev autodetect modconf block lvm2 nvidia filesystems keyboard fsck"
# systemctl status dkms
● dkms.service - Dynamic Kernel Modules System
Loaded: loaded (/usr/lib/systemd/system/dkms.service; enabled; vendor preset: disabled)
Active: active (exited) since Sun 2015-03-01 11:40:15 PST; 1h 43min ago
Process: 6196 ExecStart=/usr/lib/systemd/scripts/dkms start (code=exited, status=0/SUCCESS)
Main PID: 6196 (code=exited, status=0/SUCCESS)
CGroup: /system.slice/dkms.service
# pacman -Qm | grep nvidia
nvidia-dkms 346.35-2
nvidia-hook 2.2-3
Let me know if any other information is needed.
Thanks.
Last edited by digger (2015-03-03 03:12:52)The fix, thanks to Xabre
# pacman -R nvidia-dkms
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-hook: requires nvidia-dkms
# pacman -Rs nvidia-dkms
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-hook: requires nvidia-dkms
[root@big-kahuna ~]# pacman -Rdd nvidia-dkms
Packages (1) nvidia-dkms-346.35-2
Total Removed Size: 12.29 MiB
:: Do you want to remove these packages? [Y/n] Y
-------- Uninstall Beginning --------
Module: nvidia
Version: 346.35
Kernel: 3.18.5-1-ARCH (x86_64)
Status: Before uninstall, this module version was ACTIVE on this kernel.
nvidia.ko:
- Uninstallation
- Deleting from: /usr/lib/modules/3.18.5-1-ARCH/kernel/drivers/video/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
nvidia-uvm.ko:
- Uninstallation
- Deleting from: /usr/lib/modules/3.18.5-1-ARCH/kernel/drivers/video/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod....
DKMS: uninstall completed.
-------- Uninstall Beginning --------
Module: nvidia
Version: 346.35
Kernel: 3.18.6-1-ARCH (x86_64)
Status: Before uninstall, this module version was ACTIVE on this kernel.
nvidia.ko:
- Uninstallation
- Deleting from: /usr/lib/modules/3.18.6-1-ARCH/kernel/drivers/video/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
nvidia-uvm.ko:
- Uninstallation
- Deleting from: /usr/lib/modules/3.18.6-1-ARCH/kernel/drivers/video/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod.....
DKMS: uninstall completed.
Deleting module version: 346.35
completely from the DKMS tree.
Done.
(1/1) removing nvidia-dkms [######################] 100%
# pacman -Syu ### This ran as expected.
All I wanted was to have the simplest use of the Nvidia proprietary driver. So I followed https://wiki.archlinux.org/index.php/NV … any_kernel
So what I gather from the discussion here is that this (nvidia-dkms) should only be used for custom kernels? And the topic should be a sub topic of https://wiki.archlinux.org/index.php/NV … tom_kernel? Is that right?
Thanks for you help.
Last edited by digger (2015-03-03 03:11:58) -
Adobe loader fails to complete
cs6 photoshop..Student version installed.. Blue screen of death required system restore to befor that installation.
Trying to reinstall, but adobe loader fails to complete. Any ideas?? Thanks RayWe cannot know. We need the exact crash info and at least some system specs. Refer to this:
Working with your Operating System’s Tools
That aside, if you ran a system restore, the install would be busted from stem to stern. Run the Creative Suite Cleaner Tool and try again. If it still doesn't work, we need install logs.
Mylenium -
Standalone Player (Projector) SOL Fails in Vista
I have a Flash MX application compiled as a Projector to run
as a Windows standalone (no browser), but it needs to get data from
a server application using sendAndLoad (through plain HTTP). This
data must be stored in Shared Local Objects (.sol files) for the
app to run. It works fine in Windows XP, and did work fine in
initial Windows Vista. But now it fails in Vista SP1 (although
server logs show it still runs the server app). So either Vista SP1
is blocking the data return (and the firewall
is open for the Flash exe), or preventing the Flash exe from
writing the SOL file to disk - or something else I haven't thought
of.
Grateful for a solution.BTW, the ZT works fine on an XP system using same software as on Vista
-
Material Master Data load failed
Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems. -
Hi Experts,
One of my master data full load failed, see the below erro message in status tab,
Incorrect data records - error requests (total status RED)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target.
The request was marked as incorrect so that the data that was already updated cannot be used in reporting.
The incorrect records were not written in the data targets but were posted retroactively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors and post the error requests. Then set this request manually to green.
can any one please give me solution.
Thanks
DavidHI,
I am loading the data from application server, i dont have R/3 for this load. and the below message is showing in status tab;
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
Thanks
David
Maybe you are looking for
-
Help using a web service.
Ok to Start off I havent used java for a while now, but was asked to create a small program that can enter and pull items from a database and send them to a web service. Trouble is I am not familiar with this type of operation. I cant seem to find a
-
How to go one level up in xml publisher reports
Hi Experts, I am working in XML Publisher reports; I am working Invoice report (standard report), below is my requirement. Template sample: <?for-each:G_INVOICE?> <?trx_number?> <?trx_type?> <?for-each:G_LINES?> <?LINE_NUMBER?> <?COMMODITY_CODE?> <?Q
-
HT6065 Since installing Mavericks the scanner on my Epson printer won't work.
Since installing Mavericks the scanner on my Epson SX115 printer won't work.
-
Should I purchase the 16GB or 32GB iPad?
I'm looking into buying the latest iPad. I'm unsure of whether settling for the 16GB or going extra for the 32GB. I have about 5GB of music. I'm looking to have this iPad for reading books, magazines, maybe text books. I'm app crazy, so I love to buy
-
Hi, I'm a student film maker just completed shooting my diploma project on RED ONE and planned the entire workflow on FINAL CUT STUDIO. It's just seemless but the final output should be delivered on FILM. My questions: Which FILM RECORDER should be u